Multi-Channel Jet FL-600FE (Air Nozzle)

basic information

Material: Iron/PVC Impact Force: 4.3N @ 0.2MPa Noise Level: 86 dB (A) @ 0.2MPa Flow Rate: 31N?/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Price information

-

Delivery Time

※Please contact each agency.

Applications/Examples of results

= Examples of Use = ≪Removal≫ Chip removal, scrap and burr removal after air blowing in the cleaning device's air blow chamber, removal of residual burrs, chips from machining reference surfaces, debris from surfaces before painting, and liquid drips from air knives, etc. ≪Cleaning≫ Blowing off metal surfaces from presses, die casting, machining reference surfaces, pallets, parts, and products; debris from surfaces before painting; surfaces of plates before plating; bowls of weighing instruments; and chemical cleaning of parts and plates, etc. ≪Air Blowing≫ Leak tester sections, leveling of release agents, drying, heating, cooling, and peeling. ≪Water Removal, Cooling, and Others≫ After cleaning, before plating of plates, uniformity of coating thickness (using air knives, etc.), blowing off products, air injection during packaging, cooling, and air curtains.

Line up（18）