Multi-Channel Jet FL-600R (Air Nozzle)

basic information

Material: ABS Impact Force: 2.2N @ 0.2MPa Noise Level: 74 dB (A) @ 0.2MPa Flow Rate: 16Nm3/h @ 0.2MPa Maximum Operating Pressure: 0.6MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single-port nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Price information

-

Delivery Time

※Please contact each agency.

Applications/Examples of results

【Examples of Use】 ≪Removal≫ - Chips in the air blow chamber of cleaning equipment - Scrap after deburring - Burr removal, residual burrs - Chips from press, machined reference surfaces, etc. - Debris on surfaces before painting - Liquid drips from air knives, etc. ≪Cleaning≫ - Presses - Metals such as die-casting - Machined reference surfaces, etc. - Blowing off pallets, parts, and products - Debris on surfaces before painting - Before plating of plates, etc. - Bowls of weighing instruments - Chemical cleaning of parts and plates, etc. ≪Air Blow≫ - Leak tester section - Leveling of release agents - Drying - Heating - Cooling - Stripping ≪Water Removal, Cooling, and Others≫ - After cleaning - Before plating of plates, etc. - Uniformity of coating thickness (air knives, etc.) blowing off products - Air injection, cooling, and air curtains during packaging

Detailed information

• 

  Oil cutting

Line up（18）