Multi-Channel Jet FL-600STW (Air Nozzle)

basic information

Material: SUS 316L Impact Force: 4.2N @ 0.2MPa Noise Level: 78 db (A) @ 0.2MPa Flow Rate: 32Nm3/h @ 0.2MPa Maximum Operating Pressure: 3MPa Heat Resistance: 550℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single port nozzle (copper pipe and crushed): approximately 12 db (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages)

Price information

-

Delivery Time

※Please contact each agency.

Applications/Examples of results

= Examples of Use = ≪Removal≫ - Chips in the air blow chamber of cleaning equipment - Scrap after deburring - Burr removal, residual burrs - Chips from press, machining reference surfaces, etc. - Debris on surfaces before painting - Liquid drips from air knives, etc. ≪Cleaning≫ - Press - Metals such as die casting - Machining reference surfaces, etc. - Pallets - Blowing off parts and products - Debris on surfaces before painting - Before plating sheets, etc. - Bowls of weighing instruments - Chemical washing of parts and sheets, etc. ≪Air Blow≫ - Leak tester section - Leveling of release agents - Drying - Heating - Cooling - Peeling ≪Water Removal, Cooling, and Others≫ - After cleaning - Before plating sheets, etc. - Uniforming coating thickness (air knives, etc.) by blowing off products - Air injection, cooling, and air curtain during packaging

Line up（18）