フロロテクノロジー List of Products and Services

The fluorosurf FG-3650 series protective coating for electronic circuit boards is suitable for waterproofing and insulating protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. Free samples are available upon request. [Challenges] - High waterproofing - Quick-drying - Non-hazardous with low odor, as the equipment is not explosion-proof *If you would like a free sample, please include "Request for Sample" in your inquiry.

• others

The fluorosurf FG-3650 series protective coating for electronic circuit boards has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Reasons to Choose FG-3650】 ■ High migration prevention performance ■ Non-hazardous under the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (under the Industrial Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time, eliminating the need for drying equipment ■ Low odor *If you would like a free sample, please indicate "Sample Request" in your inquiry.

• others

The fluorosurf FG-3650 series protective coating for electronic circuit boards is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. Free samples are available upon request. 【Introduction to Background】 ■ Prevent metal migration due to moisture in multilayer mounted circuit boards. ■ Short circuits and failures caused by water droplets and humidity during outdoor use. ■ Prevention of fire due to short circuits from lithium battery electrolyte leakage. ■ Occurrence of malfunctions and corrosion due to leaks caused by condensation in high humidity. *If you would like a free sample, please include "Request for Sample" in your inquiry.

• others

The "FloroSurf FS-702X Series" is a product that can impart functionalities such as anti-fouling, low refractive index, slip properties, and water and oil repellency by adding a small amount to UV-curable acrylic hard coat agents. During drying, the fluorine component rises to the surface of the hard coat agent to exhibit its functions, and an addition amount of about 1-3% is sufficient. It offers good cost performance. It also demonstrates effectiveness in enhancing abrasion resistance as it co-polymerizes and integrates with the components of the hard coat agent during UV irradiation. It is ideal for surface modification of various plastic films, such as plastic touch panels. 【Features】 ■ Effective with an addition amount of 1-3% ■ Low oil and grease slip angle, excellent fingerprint removal properties ■ Three types available based on compatibility with hard coat agents *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

"FloroSurf" and "Mold Free" provide excellent non-stick release properties to metal surfaces when applied. Please try it when conventional release agents fail. 【Features】 ■ The fluoropolymer film reacts with the mold material to adhere strongly, allowing for continuous release even when conventional release agents fail. ■ The film thickness is only a few nanometers, accurately reproducing surface shapes at the nano and sub-micron level. ■ FloroSurf can be applied with brushes or spray guns, while Mold Free can be applied directly from an aerosol can. Application is completed in just 10 minutes at room temperature, eliminating the need for external processing like baked fluoropolymer. ■ There is no accumulation of dirt on the mold, nor transfer to the workpiece, eliminating the need for cleaning processes. (Except for Mold Free MF-02S) ■ It is effective in improving resin flow. ■ There is no transfer of release agent components, so cleaning of molded products is unnecessary. ■ It is non-flammable and not classified as a hazardous material under fire safety laws. Additionally, it has low odor. A water-based model is also available for VOC measures. ■ There is no need to remove the film during mold reworking. ■ It is effective in reducing surface defects in extrusion molding.

• others

The "Water-based Water and Oil Repellent Dry Lubricating Coating Agent FluoroSurf FG-6050" is a coating agent that can be diluted 10 to 20 times with water or alcohol. The coating can be easily applied by immersion or brush, and after drying at room temperature, it forms a film that strongly repels water and oil. It has a dry film that provides lubrication. Since it has a flexible film, it can also be used on rubber and textiles. We offer free samples to those who request them. 【Features】 ■ Can be diluted 10-20 times with water or alcohol for use. ■ Coating can be easily applied by immersion or brush, and after drying at room temperature, it forms a film that strongly repels water and oil. ■ It has a dry film that provides lubrication. ■ The flexible film allows for use on rubber and textiles. ■ While functionality can be achieved with just room temperature drying after application, heating at 60-80°C for about 10 minutes further improves the durability of the film. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The "FluorSurf FG-5093 Metal Anti-Contamination and Lubrication Coating Agent" forms a transparent fluororesin film with high adhesion and high hardness on the metal surface when applied, imparting functions such as water repellency, oil repellency, non-stick properties, anti-contamination, fingerprint reduction, low friction, and release properties. It becomes difficult for fingerprints and grease to adhere, and wiping off is easy. It strongly adheres to metal, has excellent abrasion resistance, and maintains its effectiveness over a long period. Free samples are available upon request. **Features** - Reduces the adhesion of fingerprints and dirt on metal surfaces, making it easy to wipe off any adhered dirt. - The film has high adhesion and abrasion resistance, ensuring long-lasting effectiveness. - The coefficient of dynamic friction on the surface is low, providing a dry lubrication surface. - Chemically bonds to metal at room temperature, forming a transparent anti-contamination film. - The coating is a nanometer-level thin film, so it does not compromise the appearance of the material. - It uses a non-flammable, low-toxicity, low-odor fluorinated solvent, making it safe for use. *If you would like a free sample, please include "Sample Request" in your inquiry.*

• others

The FluoroSurf FG-3630 series forms a transparent acid-resistant fluororesin film on the coated surface. It can shut out sulfur gases from LEDs, preventing brightness reduction caused by sulfide, such as silver plating. Free samples are available for those who wish to receive them. Since it is effective with a thin film, the coating does not reduce the brightness of the LEDs. Additionally, the fluorine coating is chemically stable, allowing for long-term protection. 【Features】 ■ The coating liquid uses a non-flammable and safe solvent. ■ It has low odor and low toxicity, maintaining a good workplace environment. ■ It dries at room temperature, with a drying time of 5 seconds to 30 minutes. No heating is required. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

Water and oil repellent treatment agents form a low surface tension film through coating. They strongly repel water and oil, effectively blocking the rise of oils, fats, resins, flux, and more, as well as preventing dirt and adhesion. They can also be used for waterproofing treatments on fibers and printed circuit boards. 【Features】 ■ Coating can be easily done by dipping, brushing, etc. Automation is also possible with spray machines and dip machines. ■ Drying can be done at room temperature, with various settings available from fast-drying types (5 seconds) to slow-drying types (20 minutes). ■ The non-flammable solvent is non-flammable and low in toxicity, ensuring a good workplace environment. It also does not damage plastics. ■ A wide range of products is available according to your needs, with various thickness options from nano to micron. ■ Example of performance → Water contact angle 119°; Hexadecane contact angle 80° *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The fluorosurf FG-3650 series protective coating for electronic circuit boards is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. Free samples are available upon request. **Features** - Four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings. - Being a thin film, it minimizes weight increase, making it suitable for lightweight devices such as mobile equipment. - Provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also offering rust prevention. - Non-flammable and low-odor, ensuring safe use. There are no fire safety regulations. - Dries at room temperature, with a drying time of 5 seconds to 30 minutes. No heating is required. *If you would like a free sample, please include "Sample Request" in your inquiry.*

• others

Cheaper compared to non-flammable solvent types. A petroleum-based solvent type fluorosurf suitable for insulation, moisture-proofing, protective coatings, and conformal coatings. 【Features】 ■ Cheaper compared to non-flammable solvent types ■ Uses n-heptane as the main solvent, which has low toxicity and minimal impact on plastics (does not contain any substances designated under the PRTR law) ■ Does not contain chlorine components that can cause dioxins. ■ We can also accommodate changes in resin concentration according to your desired film thickness. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

A water and oil repellent treatment agent that forms a fluororesin film by diluting with water or alcohol to about 10-30 times and allowing it to dry at room temperature after application. 【Features】 ■ After diluting with water or alcohol to about 10-30 times and applying, a fluororesin film is formed by drying at room temperature. ■ Strongly repels water and oil, blocking the rise of grease and resin. ■ Effective with a thin film of up to several microns. ■ Film thickness can be adjusted by changing the dilution ratio. ■ Coating can be easily done by immersion, brushing, etc. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The "Anti-Soil and Fingerprint Prevention Coating Agent FluoroSurf FG-5000 Series" is a coating agent that forms a non-stick surface with anti-soil properties. It can be easily applied, dries at room temperature for surface treatment, and makes it difficult for fingerprints and grease to adhere, while also allowing for easy wiping. 【Features】 ■ Reduces the adhesion of fingerprints and dirt, making it easy to wipe off any dirt that does adhere. ■ With a highly adhesive film, the functionality is maintained continuously. ■ The surface has a low dynamic friction coefficient, resulting in a dry lubricated surface. ■ Chemically bonds with various materials such as glass and metal at room temperature, forming a transparent anti-soil film. ■ Being a thin film, it does not compromise the appearance of the material. ◎ Samples are available for those who request them (limited to corporations). Please note that our products are industrial chemical products, and we cannot provide samples for personal use (in cases without corporate status), medical use, or applications involving contact with food.

• others

The water and oil repellent treatment agent "FluoroSurf" exhibits water and oil repellency through the fluororesin film formed on the surface, effectively repelling water and oil. It offers various benefits such as preventing grease barriers (anti-adhesion), diffusion prevention, adhesion prevention, and dirt resistance. Free samples are available for those who request them. 【Features】 ◯ A special fluororesin is dissolved in a non-flammable fluorinated solvent or organic solvent to create a solution. ◯ Easy coating with brushes or immersion. Dries at room temperature in 5 seconds to 15 minutes. ◯ After drying, a fluororesin film is formed, demonstrating effectiveness in dirt resistance, water repellency, and moisture resistance. 【Effective for the following applications!】 ■ Waterproof and moisture-proof protective coating for printed circuit boards ■ Coating for printed circuit boards resistant to lithium electrolyte ■ Fingerprint adhesion prevention for displays and lenses ■ Prevention of oil leakage from miniature motors and spindle motors ■ Stopping the flow of resin for capacitor sealing ■ Reducing reflected light from optical components ■ Binder for dry lubricants ■ Concentrate for waterproof spray for shoes and clothing... *If you would like a free sample, please include "Sample Request" in your inquiry.

• others