フロロテクノロジー List of Products and Services

"FloroSurf" and "Mold Free" provide excellent non-stick release properties to metal surfaces when applied. Please try it when conventional release agents fail. 【Features】 ■ The fluororesin film reacts with the mold material and adheres strongly, allowing continuous release even when conventional release agents fail. ■ The film thickness is only a few nanometers, faithfully reproducing surface shapes at the nano and sub-micron level. ■ FloroSurf can be applied with a brush or spray gun, while Mold Free can be applied directly from an aerosol can. The application is completed in just 10 minutes at room temperature, eliminating the need for external processing like baked fluororesin. ■ There is no accumulation of dirt on the mold, nor transfer to the workpiece, making cleaning processes unnecessary. (Except for Mold Free MF-02S) ■ It is effective in improving resin flow. ■ There is no transfer of release agent components, so cleaning of molded products is unnecessary. ■ It is non-flammable, thus not classified as hazardous under fire safety laws. Additionally, it has low odor. There is also a water-based model available for VOC countermeasures. ■ There is no need to remove the film during mold reworking. ■ It is effective in reducing surface defects in extrusion molding.

• others

The fluorosurf FG-3650 series protective coating for electronic circuit boards is suitable for waterproofing and insulating protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. Free samples are available upon request. 【Features】 ■ Four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings. ■ Being a thin film, it minimizes weight increase, making it suitable for lightweight devices such as mobile equipment. ■ Provides strong protection against acidic gases, saline solutions, and corrosive liquids, also offering rust prevention. ■ Non-flammable and low-odor, ensuring safe usage. There are no fire safety regulations. ■ Dries at room temperature, with a drying time of 5 seconds to 30 minutes. No heating is required. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The "Fluoro Surf FG-5093" is a fluorine-based dry mold release agent. It does not contain silicone, so it does not dirty the molded products, eliminating the need for cleaning. By applying it, the adhesion of the surface molding resin is reduced, and since it forms a thin film at the nanometer level, it exhibits excellent release properties even for complex and precise shapes, maintaining accurate surface precision. It demonstrates its effectiveness in cases where conventional release agents do not work well. It has excellent durability, with a proven track record of continuous release over thousands of shots, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ The release agent component reacts with the mold material to adhere strongly, allowing for continuous release. ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. ■ It can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing. ■ There is no need to remove the film during mold reworking. ■ There is no transfer of the release agent component, so cleaning of molded products is unnecessary. ■ It has low odor and is non-flammable, helping to maintain a good working environment. ■ It does not use PFAS regulated substances (such as PFOS, PFOA, PFHxS, etc.). *If you would like a free sample, please indicate "Sample Request" in your inquiry. (Corporate only)

• others

A high-performance release agent with proven results in various fields, the fluorine-based release agent "Fluorosurf" has been made into an aerosol. It can be easily applied on-site and exhibits excellent release properties after air-drying at room temperature. Additionally, it can be used as a substitute for release agents from other manufacturers that have been discontinued. Please note that this product does not contain regulated substances (PFOA, PFOS, PFHxS). *If you would like a sample for use, please indicate "Sample Request" in your inquiry. (This is limited to corporate clients. It cannot be used for applications involving food contact or medical purposes.)

• others

The current regulations regarding PFAS are as follows: Complete regulation: PFOS, PFOA, and precursors of PFHxS are subject to regulation for almost all applications. Planned regulation in Europe: PFHxA is prohibited for use in the following limited applications: textiles, leather, paper, food packaging, shoes, etc. For PFAS other than the above (organic fluorinated compounds), it has been considered that there are no impacts on the environment or human health in the past. There is no evidence that substances other than the currently regulated PFAS are harmful, and due to the significant impact on industries such as semiconductors and automobiles if regulations were to be imposed, regulation in Europe is currently under consideration. This regulation is expected to be reduced in the future, and the compounds and applications subject to regulation have not yet been determined. Some fluorochemical manufacturers have announced the discontinuation of their products; however, our products are currently not subject to regulation, so we do not plan to halt supply. If you are facing difficulties due to the discontinuation of product supplies such as release agents or water and oil repellents, we can provide information, suggestions, and samples of alternative products. Please feel free to contact us.

• others

The "FloroSurf FG-3650 Series" electronic substrate protective coating (conformal coating) has a proven track record in waterproofing and insulating protection for automotive substrates and electronic components, as well as in moisture-proof and waterproof coatings for mounted substrates. 【Performance Features】 ■ Higher moisture and waterproof properties compared to other resins! → Offers four times the moisture-proof performance compared to urethane and acrylic moisture-proof coatings at the same film thickness! It exhibits more than ten times the moisture-proof performance compared to silicone-based coatings. Minimizes weight increase due to the coating film, making it ideal for lightweight devices such as mobile equipment. ■ Resistant to acidic substances like lithium battery electrolytes! → Can protect substrates during electrolyte leakage, preventing fire accidents. ■ Provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also exhibiting rust prevention effects. ■ Unlike reactive coatings (silicone, UV acrylic, etc.) that leave unreacted components that can affect properties, this product does not retain unreacted components (low molecular compounds), ensuring stable electrical characteristics and preventing contact failures in electrical connections after application. ■ A model with fluorescent dye for application confirmation is also available. *Please contact us if you would like a free sample.

• others

The "Fluoro Surf FG-509X Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. When applied to the mold with a brush or spray and allowed to dry at room temperature for about 10 minutes, it reduces the adhesion of the surface molding resin, demonstrating excellent release properties. It is particularly effective in situations where conventional release agents do not work well. The film is at the nanometer level, allowing for accurate reproduction even on complex and precise surface shapes. It has excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Since the release agent components do not adhere to the molded products, cleaning is unnecessary. Additionally, regulated substances such as PFOS, PFOA, and PFHxS are not used. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release. ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. ■ Can be easily applied with a brush or spray gun, eliminating the need for outsourcing processing. ■ No need to remove the film during mold reworking. ■ No transfer of release agent components, making cleaning of molded products unnecessary. ■ Low odor and non-flammable, maintaining a good working environment and easy management.

• others

Fluorine coating agent "FluoroSurf," a water and oil repellent treatment agent, exhibits water and oil repellency through the fluororesin film formed on the surface, effectively repelling water and oil. It offers various benefits such as preventing the rise of grease, diffusion prevention, adhesion prevention, and dirt resistance. No regulated PFAS substances are used. 【Features】 ◯ Easy coating with a brush or immersion. Dries in 5 seconds to 15 minutes at room temperature. ◯ After drying, a fluororesin film is formed, demonstrating effectiveness in dirt resistance, water repellency, and moisture resistance. 【Effective for the following applications!】 ■ Water and oil repellent treatment for shoes and clothing = Waterproof spray concentrate… ■ Prevention of oil leakage from miniature motors and spindle motors ■ Waterproof and moisture protection coating for printed circuit boards ■ Coating for printed circuit boards resistant to lithium electrolyte ■ Improved release properties for resin and elastomer molding ■ Fingerprint adhesion prevention for displays and lenses ■ Resin flow stop for capacitor sealing ■ Reduction of reflected light in optical components ■ Binder for dry lubricants OEM supply for various applications is also available. *Free samples are currently available (limited to corporations; medical and food-contact applications are excluded).

• others

The fluorine coating agent "Fluorosurf" forms a fluororesin film at room temperature, exhibiting various benefits such as water and oil repellency, prevention of grease accumulation (diffusion), fingerprint adhesion prevention, dirt resistance, lubrication, and release properties. 【Features】 ◯ A special fluororesin is dissolved in a non-flammable fluorinated solvent to create a solution. ◯ Easy coating using a brush or immersion. It dries within 5 seconds to 15 minutes at room temperature. ◯ After drying, a transparent and thin fluororesin film is formed, demonstrating effectiveness in dirt resistance, water repellency, and moisture prevention. ◯ PFAS regulatory substances PFOS, PFOA, and PFHxS are not used at all. 【Effective for the following applications!】 ■ Prevention of metal sulfide and oxidation ■ Coating for resistance to lithium electrolyte ■ Release agent for molds in resin and elastomer molding ■ Prevention of fingerprint adhesion on displays and lenses ■ Prevention of oil leakage from miniature motors and spindle motors ■ Flow stop for sealing resins ■ Insulating moisture-proof coating for electrical circuits to prevent leaks *If you would like a free sample, please indicate "Sample Request" in your inquiry. *Please note that our products are industrial chemical products, and we cannot provide samples for personal use (in cases without corporate status), medical use, or applications involving contact with food.

• others

The fluorine coating agent "Fluorosurf" forms a transparent fluororesin film at room temperature, exhibiting various benefits such as acid protection, water and oil repellency, prevention of grease rise (diffusion), fingerprint adhesion prevention, anti-soiling, lubrication, and release properties. 【Effective for the following applications!】 ■ Prevention of metal sulfide and oxidation ■ Protection of metals and resins from acids generated in fuel cells and lithium batteries. ■ Rust prevention for metals around batteries ■ Coating resistant to lithium electrolyte ■ Fingerprint adhesion prevention for displays and lenses ■ Prevention of oil leakage from miniature motors and spindle motor bearings ■ Stopping the flow of sealing resin ■ Insulating and moisture-proof coating for electric circuits ■ Prevention of leaks in electric circuits ■ Release agent for molds used in resin and elastomer molding 【Features】 ◯ A special fluororesin is dissolved in a non-flammable fluorine-based solvent to create a solution. ◯ Easy coating by brushing or dipping. Dries in 5 seconds to 15 minutes at room temperature. ◯ After drying, a transparent thin film of fluororesin is formed, demonstrating effectiveness in anti-soiling, water repellency, moisture resistance, etc. 〇 No use of PFAS regulated substances such as PFOS, PFOA, or PFHxS. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

"FluoroSurf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molded molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily applied on the molding site using brushes or spray guns. * The release component reacts and bonds to the mold surface, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * When the release performance decreases, reapplication will restore its effectiveness. * By applying it to the nozzle of extrusion molds, it can also reduce streaking. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the regulations stipulated by fire and safety laws. * The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * If you would like a free sample, please include "Sample Request" in your inquiry.

• others

"FluoroSurf FG-5090" is a coating agent that improves release properties by being applied to molds treated with fluororesin. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * It can also be applied to molds treated with fluororesin, and can be easily applied on the molding site using a brush or spray gun. * Just one application grants a non-stick property to the mold surface, demonstrating excellent release properties even for complex and precise shapes. * There is no transfer or accumulation of dirt on the mold or workpiece. * It is non-flammable and does not fall under organic solvent regulations, eliminating the need for explosion-proof facilities, quantity management, and environmental measurements as stipulated by fire safety and occupational safety laws. * If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The "Fluorosurf FG-3650 Series" conformal coating for electronic circuit boards is suitable for waterproofing and insulation protection of electronic components, leak prevention, and moisture-proof and waterproof coatings for mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety regulations. Additionally, PFOS, PFOA, and PFHxS are not used at all. 【Performance Features】 It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. - Compared to other resins, it has high moisture and waterproofing properties. → It offers four times the moisture resistance compared to urethane and acrylic moisture-proof coatings at the same film thickness! It demonstrates more than ten times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimal, making it ideal for lightweight mobile devices. - High resistance to acidic substances such as lithium battery electrolytes. → It can protect the circuit board during electrolyte leakage, preventing fire accidents. - It provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also exhibiting rust prevention effects. - It does not contain low molecular compounds like silicone, which can cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

• others

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 Series" exhibits protective functions such as moisture resistance, gasoline resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film coating! It is ideal for waterproofing and insulation protection of electronic components, as well as moisture-proof and waterproof coatings for mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety regulations, and contains no PFOS or PFOA. 【Performance Features】 ■ High moisture and water resistance → Compared to urethane and acrylic-based moisture-proof coatings of the same film thickness, it has 4 times the moisture resistance! It exhibits more than 10 times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile devices. ■ High resistance to acidic substances such as lithium battery electrolytes → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ It exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention effects. ■ Since it does not contain low molecular compounds like silicone, it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

• others

The coating agent for substrates (conformal coating) "Fluorosurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under organic solvent regulations, making it free from the restrictions of fire laws and safety regulations. Furthermore, no PFAS regulated substances such as PFOS, PFOA, or PFHxS are used. 【Performance Features】 It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. - Compared to other resins, it has high moisture and waterproof properties. → It offers four times the moisture resistance compared to urethane or acrylic moisture-proof coatings at the same film thickness! It demonstrates more than ten times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. - High resistance to acidic substances like lithium battery electrolytes. → It can protect the substrate in case of electrolyte leakage, preventing fire accidents. - It also provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, exhibiting rust prevention effects. - It does not contain unreacted low molecular compounds like silicone or UV-curable types, ensuring high reliability. It will not cause contact failure of electrical contacts after application.

• others

It can be easily applied with a transparent coating, providing long-lasting (over 1 year) dirt resistance to glass surfaces. ■ A durable dirt-repellent coating is needed without changing the appearance. ■ It is non-flammable and low-odor, making it safe to apply in stores. FluoroSurf FG-5084 is also used to prevent dirt on smartphone touch panels. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The "FloroSurf FG-3650 Series" electronic circuit board protective coating (conformal coating) has numerous achievements in waterproofing and insulation protection for automotive circuit boards and electronic components, as well as in moisture-proof and waterproof coatings for mounted circuit boards. 【Performance Features】 ■ Higher moisture and waterproof properties compared to other resins! → It offers four times the moisture-proof performance compared to urethane and acrylic-based moisture-proof coatings at the same film thickness! It exhibits more than ten times the moisture-proof performance compared to silicone-based coatings. This coating minimizes weight gain, making it ideal for lightweight devices such as mobile equipment. ■ Resistant to acidic substances such as the electrolyte of lithium batteries! → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ It provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also exhibiting rust prevention effects. ■ In reactive coatings (such as silicone and UV acrylic), unreacted components remain and can affect properties. This product does not retain unreacted components (low molecular compounds), ensuring stable electrical characteristics and preventing contact failure of electrical contacts after application. ■ A model with fluorescent dye for application confirmation is also available. *Please contact us if you would like a free sample.

• others

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for insulating protection and waterproofing of electronic components and mounted substrates, and is non-flammable and exempt from organic solvent regulations, making it free from fire safety and occupational safety regulations. Compared to urethane, acrylic, and silicone-based insulating coatings, it has 3 to 10 times better moisture resistance (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. 【Benefits in Manufacturing Environments】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire safety regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Exempt from organic solvent regulations under occupational safety law. → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment such as heating furnaces is required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating. *Please contact us if you would like a free sample.

• others

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational health and safety law restrictions. Compared to urethane, acrylic, and silicone-based coatings, its moisture resistance is over 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. 【Benefits in the manufacturing environment】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire safety regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under occupational health and safety law. → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment like heating furnaces is required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating. *If you would like a free sample, please contact us.

• others

The protective coating agent for electronic substrates, "FloroSurf FG-3650 Series," is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating (conformal coating) of mounted substrates. ▼ Excellent performance of FloroSurf FG-3650 Series High moisture and waterproof properties / Resistance to lithium battery electrolyte / Acid resistance and resistance to oxidizing gases High insulation resistance and low dielectric constant / Non-flammable and non-hazardous ~ We are offering free samples exclusively for corporations! ~ Please select "Request Sample" from the [Contact Button] below.

• others

Introducing the high-performance fluorine-based mold release agent "FloroSurf," which surpasses baked-on fluoropolymer processing and silicone release agents. When conventional release agents fail to release ⇒ We solve the problem with outstanding release performance. When you want to improve continuous release properties ⇒ Continuous release properties will be enhanced. "FloroSurf" features nano-level release components that bond tightly to the mold surface ⇒ It provides powerful release and lubricating properties to the mold surface. It demonstrates exceptional continuous release properties in the molding of precision complex shapes, highly adhesive resins, elastomers, and fragile thin materials. ~ We are offering free samples exclusively for corporate clients! ~ Please select "Request Sample" from the [Contact Button] below.

• others

"FloroSurf FG-5093" is a fluorine-based dry mold release agent. It does not contain silicone, preventing contamination of molded products and eliminating the need for cleaning. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work well. It boasts outstanding durability, with a proven track record of continuous release for thousands of shots, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold modification ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

"FloroSurf FG-5090" is a fluorine-based release agent for molds. It can be easily applied and demonstrates improved release properties even in cases where it is difficult to release from fluororesin-coated molds. Fluororesin-coated molds are challenging to coat with oil-based or silicone-based release agents as they tend to repel them, but FloroSurf FG-5090 spreads uniformly on the fluororesin surface and exhibits excellent release properties. 【Features】 ■ Strongly adheres to mold materials, allowing for continuous release. ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. ■ Can be easily applied with brushes or spray guns, and the application is completed in 10-15 minutes of air drying at room temperature. Outsourcing for processing is unnecessary. ■ Low odor and non-flammable, maintaining a good working environment. ■ Does not contain regulated substances such as PFOS, PFOA, or PFHxS. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

Fluorine-based super water-repellent coatings allow water droplets to roll off at several angles, making them ideal for protecting printed circuit boards! 1. For printed circuit boards, moisture is the greatest enemy. They can repel liquids such as condensation, rain that intrudes from the outside of the equipment housing, and electrolyte leaked from batteries, providing strong protection for the circuit board. 2. Printed circuit boards are installed inside the equipment housing, so they are not exposed to the environments that cause the aforementioned super water-repellent issues. 3. Fluorine-based coating films have high moisture resistance, insulation performance, and also resistance to acids and lithium battery electrolytes. Even if the super water-repellent structure is damaged, the protective performance for the circuit board does not diminish. 4. Furthermore, Fluorosurf is non-flammable and legally classified as not being an organic solvent. Its high safety allows for a significant reduction in management items related to hazardous materials under fire safety laws and organic solvents under occupational safety and health laws. This also minimizes capital investment. 5. Drying is completed at room temperature in 5 minutes. No heating process is required. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of printed circuit boards. It prevents metal migration with a thin film and exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Reasons for choosing FG-3650】 ■ High migration prevention performance ■ Non-hazardous material under the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (under the Industrial Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time without the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings on mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational health and safety law restrictions. Compared to urethane, acrylic, and silicone-based coatings, its moisture resistance is over 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in the manufacturing environment】 ■ It can be used safely as it is a non-flammable, low-odor liquid! → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire safety regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under occupational health and safety law → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment like heating furnaces is required. ■ It has low viscosity, making it easy to handle. The workplace remains clean. ■ The pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating.

• others

"FloroSurf FG-5093" is a fluorine-based dry mold release agent. It is free of silicone, ensuring that molded products remain clean and do not require washing. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work. It boasts exceptional durability, with a proven track record of continuous release over thousands of shots, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold modifications ■ No transfer of release agent components, eliminating the need for cleaning molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed to protect printed circuit boards from acidic substances (such as hydrogen sulfide gas and lithium battery electrolyte). It provides strong protection for metals against acidic gases and liquids with a thin film, ensuring long-term protection for printed circuit boards. 【Reasons to Choose FG-3650】 ■ High protective performance ■ Non-hazardous under the Fire Service Act, so explosion-proof equipment and quantity management are not required ■ Not classified as an organic solvent (under the Industrial Safety and Health Act), so environmental measurements and organic solvent health checks for workers are not necessary, making on-site management easier ■ Dries at room temperature in a short time without the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The "FloroSurf FG-3650 Series" protective coating agent for electronic circuit boards (conformal coating) is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted circuit boards. It is non-flammable and does not fall under the category of organic solvents, making it free from regulations under the Fire Service Act and the Industrial Safety and Health Act. Compared to urethane-based, acrylic-based, and silicone-based coatings, its moisture resistance is 3 to 10 times greater (at the same film thickness). It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in Manufacturing Environments】 ■ Safe to use as it is a non-flammable, low-odor liquid! → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or Fire Service Act regulations. No need for explosion-proof equipment or quantity management. ■ Not classified as an organic solvent under the Industrial Safety and Health Act → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Cures at room temperature in 5-20 minutes after application → No special equipment like heating furnaces is required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating. *If you would like a free sample, please contact us.

• others

The water and oil repellent treatment agent "FluoroSurf" features a fluororesin film that exhibits water and oil repellency, effectively repelling water and oil. It offers various benefits such as preventing grease barriers (anti-wicking), diffusion prevention, adhesion prevention, and dirt resistance. Free samples are available for those who request them. 【Features】 ◯ A special fluororesin is dissolved in a non-flammable fluorinated solvent or organic solvent to create a solution. ◯ Easy coating with a brush or by dipping. It dries in 5 seconds to 15 minutes at room temperature. ◯ After drying, a fluororesin film is formed, providing not only water and oil repellency but also dirt resistance, water repellency, and moisture resistance. ◯ In models with fluorescent dye, the coated areas can be confirmed by fluorescence under black light. 【Effective for the following applications!】 ■ Preventing flux wicking on lead wires ■ Preventing oil leakage from miniature motors and spindle motors ■ Stopping resin flow in capacitor sealing ■ Preventing diffusion and intrusion of silicone oil ■ Preventing lubricant leakage from the rotating axis of wristwatches *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It prevents metal migration with a thin film and exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Reasons to choose FG-3650】 ■ High migration prevention performance ■ Non-hazardous material under the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (under the Industrial Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time, no drying equipment needed ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The fluorine coating agent (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings on printed circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Features】 ■ Non-flammable and low-odor liquid, making it safe to use! Not classified as an organic solvent. → FloroSurf FG-3650 is non-flammable and low in toxicity, ensuring safety. It is not subject to PRTR law or fire service law regulations. No explosion-proof equipment is required, and quantity management is not necessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act. → This reduces management items such as environmental measurements and organic solvent health checks for workers. ■ Higher moisture and waterproofing performance compared to other resins! → It has four times the moisture-proof performance compared to urethane and acrylic moisture-proof coatings. ■ Resistant to acidic substances such as lithium battery electrolytes! → It can protect the circuit board in case of electrolyte leakage, preventing fire accidents. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment such as heating furnaces is required. ☆ Currently providing samples and a moisture-proof coating handbook exclusively for corporate clients.

• others

The high hardness and high adhesion fluorine coating agent for metals, "FluoroSurf FG-5093 Series," forms a transparent fluororesin film with high adhesion and high hardness on metal surfaces at room temperature, effectively repelling water and oil and demonstrating excellent dirt resistance. The film is transparent and thin, so it does not alter the texture of the material. Additionally, it has high adhesion and wear resistance, ensuring long-lasting effectiveness. Application is simple; just wipe with a cloth or sponge soaked in the coating liquid. There are no uneven coatings, and it finishes easily, forming a dirt-repellent film within a few minutes of room temperature drying. It is non-flammable, low toxicity, and low odor, making it safe for use at the application site. We are currently offering product samples for free! 【Features】 ■ Reduces dirt adhesion ■ Reduces fingerprint adhesion ■ Release treatment ■ Low friction ■ Non-flammable liquid *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

When FluoroSurf FG-5093 is applied to metal, it imparts a non-stick property to the surface. Non-stick means that tape, adhesives, and other dirt are less likely to stick and are easy to remove. When applied to cutting tools such as scissors, utility knives, and blade cutters, it prevents adhesive materials from sticking to the scissors when cutting adhesive tape or medical bandages, significantly improving work efficiency. Additionally, this property is durable, allowing it to maintain its effectiveness over a long period. Furthermore, the coating film is an ultra-thin film of about 10 nanometers, so it does not affect the sharpness of the cutting tools. 【Reasons to Choose FluoroSurf FG-5093】 ■ The effect of fluorine makes it easy to remove dirt ■ Transparent thin film has little impact on appearance ■ Easy to apply on-site and air dries at room temperature ■ Durability of over one year ■ If the effect diminishes, reapplication is easy to restore performance Other examples are also included! *If you would like a free sample, please indicate "Sample Request" in your inquiry.

• others

When you apply FluoroSurf FG-5093 to blades such as Thomson blades, scissors, utility knives, and push-cutting blades, it prevents adhesives and tapes from sticking during cutting, significantly improving work efficiency. Moreover, this performance is durable, allowing it to maintain its effectiveness over a long period. Additionally, the coating film is transparent and approximately 10 nanometers thick, which does not affect the sharpness of the blades. 【Reasons to Choose FluoroSurf FG-5093】 ■ The fluorine effect allows for easy removal of dirt. ■ The transparent thin film has minimal impact on appearance. ■ It can be easily applied in our own factory production sites and only requires room temperature drying. ■ When the effectiveness diminishes, it can be easily restored by reapplying. ■ It is non-flammable and safe, with low odor. ■ It does not use any regulated PFAS substances such as PFOS, PFOA, or PFHxS. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

It can be easily applied with a transparent film and provides long-lasting (over 1 year) dirt-repellent properties to glass surfaces. ■ A durable dirt-repellent coating is needed without changing the appearance. ■ It is non-flammable and low-odor, making it safe to apply in stores. FloroSurf FG-5084 is also used for dirt prevention on smartphone touch panels. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

Release agent for nanoimprint molds: Fluorosurf NL series By applying it to molds for nanoimprinting, a layer of fluorinated compounds (perfluoropolyether) with a thickness of about 10nm is chemically bonded to the mold surface, ensuring strong adhesion. This enables continuous release, significantly improving the productivity (throughput) of nanoimprint molding. Application can be easily done using methods such as spraying, and it dries at room temperature in 5-10 minutes. It is non-flammable and low-odor, making it safe. Reapplication is also easy. We offer two types: NL-1 for optical nanoimprinting NL-2 for thermal nanoimprinting *Free sample liquid available! (Please bear the shipping cost = sent cash on delivery) Feel free to request it.

• others

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent that dissolves a special fluororesin in a non-flammable fluorine-based solvent. Just one application provides a non-stick surface to the mold. It reduces the adhesion of molding resins to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres by reacting with the mold material, allowing for continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Easily applied with a brush or spray gun, and dries at room temperature in 10 minutes. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce haze. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

Fluorine-based super water-repellent coatings allow water droplets to roll off at several angles, making them ideal for protecting printed circuit boards! 1. For printed circuit boards, moisture is the greatest enemy. They can repel liquids such as condensation, rain that intrudes from the outside of the equipment housing, and electrolyte leaked from batteries, thus providing strong protection for the substrate. 2. Printed circuit boards are installed inside the equipment housing, so they are not exposed to the environments that cause the aforementioned super water-repellent issues. 3. Fluorine-based coating films have high moisture resistance, insulation performance, and also resistance to acids and lithium battery electrolytes. Even if the super water-repellent structure is damaged, the protective performance for the substrate does not diminish. 4. Furthermore, FluoroSurf is non-flammable and legally classified as non-organic solvent. Its high safety allows for a significant reduction in management items related to hazardous materials under fire safety laws and organic solvents under occupational safety and health laws. This also minimizes capital investment. 5. Drying is completed in 5 minutes at room temperature. No heating process is required. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

"FloroSurf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application reduces the adhesion of the surface molding resin, demonstrating excellent continuous release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It boasts outstanding durability, with a proven track record of continuous release for thousands of shots, and reapplication with a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, eliminating the need for outsourcing processing ■ No need to remove the film during mold modification ■ No transfer of release agent components, eliminating the need for cleaning molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

FluoroSurf FS-702X series is a fluorine-based additive for UV-curable hard coatings. When processing UV-curable hard coatings on optical films, simply adding a small amount of FluoroSurf FS-702X to the hard coating can impart functionalities such as anti-soiling (fingerprint reduction), low refractive index, and slip properties. After addition, the fluorine component rises to the surface of the hard coating and exhibits its functions, and during UV irradiation, it copolymerizes with the components of the hard coating to become integrated. By integrating, this product's functionality possesses wear resistance. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

Fluorine coating agents exhibit outstanding resistance to lithium battery electrolyte compared to other resin coating agents. They can prevent fires caused by circuit short circuits when the electrolyte leaks, as well as corrosion of metal parts. They provide protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. They have a proven track record as safety measures in various fields, including aircraft, automotive circuit boards, and mobile devices. **Challenges Addressed by Fluorine Coating:** - No short circuits occur even if lithium battery electrolyte leaks and adheres to the circuit pattern on the board. - Can be easily applied with dispensers and dries within minutes at room temperature. No drying process is required. - Non-hazardous material with no fire safety regulations. No quantity management or explosion-proof measures are necessary. - Not classified as organic solvents under the Industrial Safety and Health Act. Regular organic health checks are not required. *We offer free samples to those who request them (limited to corporate clients). Please include "Sample Request" in your inquiry. *We sincerely apologize, but as our products are industrial chemical products, we cannot provide samples for medical or food-related applications.

• others

The high hardness and high adhesion fluorine coating agent for metals, "FluoroSurf FG-5093 Series," forms a transparent fluororesin film with high adhesion and high hardness on metal surfaces at room temperature, effectively repelling water and oil, and demonstrating excellent dirt resistance. The film is transparent and thin, so it does not alter the texture of the material. Additionally, it has high adhesion and wear resistance, maintaining its effectiveness over a long period. Application is simple; just wipe with a cloth or sponge soaked in the coating liquid. It finishes easily without uneven application, and a dirt-repellent film is formed within a few minutes of drying at room temperature. It is non-flammable, low toxicity, and low odor, making it safe for use at the application site. We are currently offering product samples for free! 【Features】 ■ Reduced dirt adhesion ■ Reduced fingerprint adhesion ■ Release treatment ■ Low friction ■ Non-flammable liquid *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The fluorine coating agent (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings on printed circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Features】 ■ Non-flammable and low-odor liquid, making it safe to use! Not classified as an organic solvent. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire prevention law regulations. No explosion-proof equipment is required, and quantity management is not necessary. ■ Not classified as an organic solvent under the Industrial Safety and Health Act. → This reduces management items such as environmental measurements and organic solvent health checks for workers. ■ Higher moisture and waterproofing performance compared to other resins! → It has four times the moisture-proof performance compared to urethane and acrylic-based moisture-proof coatings. ■ Resistant to acidic substances such as lithium battery electrolytes! → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment such as heating furnaces is required. ☆ Currently providing samples and a moisture-proof coating handbook exclusively for corporate clients.

• others

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It prevents metal migration with a thin film and exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Reasons to Choose FG-3650】 ■ High migration prevention performance ■ Non-hazardous material under the Fire Service Act, so explosion-proof equipment and quantity management are unnecessary ■ Not classified as an organic solvent (under the Industrial Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time, eliminating the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

• others