計測ネットサービス List of Products and Services

■Purpose and Evaluation of the Introduction of Pile Navi Cloud-H Until now, we have been using a transit to check in the vertical direction, but there were several challenges. First, it was difficult to grasp the differences from the accurate design values in real-time during the pouring work. Additionally, the visibility of the transit was poor at night or in dark places, and there was also the issue that measurement results could vary depending on the skill of the observer. Overall, I feel that it has helped improve the accuracy of shape management, and the ability to operate it from a distance using a tablet PC has contributed to labor reduction. The system's operation felt intuitive and easy to understand, giving a user-friendly impression. In summary, I would rate it at about 80 points.

• Foundation construction
• Steel structure construction
• Earth retaining wall/foundation reinforcement

■Purpose and Evaluation of the 3D Barrier Introduction In the construction of a new factory, a 3D barrier was introduced to manage the distance from high-voltage lines for the use of heavy machinery such as crawler cranes and pile drivers that require work at heights. Previously, monitoring had to be done manually through visual checks or with a transit, but with the 3D barrier, the management area can be freely set, allowing for efficient and safe work. In particular, the system that immediately alerts with an alarm and patrol light when entering the danger zone (11m from the high-voltage line plus a 1m margin) has contributed to a sense of security.

• Bridge Construction
• Railway Construction
• Steel structure construction

This is a system for recording and managing the concrete compaction time. It displays the pouring area in 3D blocks on a measurement device, making it easier to understand the current situation with countdown functions for compaction time limits and remaining time, contributing to the prevention of cold joints. 【Features】 ■ Contributes to the prevention of cold joint occurrence By accurately counting and displaying the elapsed pouring time, it supports decision-making for the next pouring within the specified time. This reduces the risk of cold joints that may occur due to delays in overlapping pours. ■ Management of pouring range with 3D blocks The pouring locations can be confirmed and managed with blocks. Overlapping in the vertical direction is also displayed in three dimensions, allowing for a clear understanding of the current work status. Additionally, the status of compaction work for each block is color-coded, and when the set caution time or warning time is reached, the background color of the block or list display changes, providing a visual alert. ■ Output function for deliverables to improve document creation efficiency Screenshots can be saved, and list displays can be output in CSV format. This contributes to the efficiency of document creation tasks such as shape management and construction records.

• Reinforced concrete construction

This is a system for calculating and displaying the installation position and tilt of H-shaped steel piles during driving. It measures one point each at the top and bottom of the H-shaped steel side using a total station, allowing for real-time confirmation of positional deviations and tilting during installation. The data and visuals are displayed on an in-vehicle monitor, contributing to quality improvement. 【Features】 ■ NETIS registered (Number: KT-220168-VE) ■ Measurement with a single total station, no need for prism installation ■ Remote data viewing and report output via web browser (K-Cloud) *For more details, please refer to the materials.

• Piles, caissons, sheet piles

A total station with non-prism measurement capabilities measures two points each on the upper and lower diameters of the pile, displaying the difference between the design values and the actual measurements both numerically and visually. This system manages the inclination angle and azimuth angle during the installation of inclined piles, contributing to labor-saving in measurement work and improving quality. 【Features】 ■ NETIS registered (Number: KT-220168-V) ■ Patent pending ■ Compatible with inclined pile construction methods and rotary percussion drills ■ Measurement with a single total station, no need for prism installation ■ Remote data viewing and report output via web browser (K-Cloud) *For more details, please refer to the materials.

• Harbor Construction

This is a system that automatically measures the behavior of structures and slopes 24 hours a day and unmanned, using automatic targeting total stations and GNSS as sensors. By immediately processing the acquired data, it is possible to view three-dimensional displacement information on a PC monitor or remotely via the internet. If data exceeding the pre-set displacement management value (alert value) in the system is acquired, the accompanying alarm system will automatically detect it and send a warning to the registered administrator via email or display lights. The NETIS number has been updated as of March 2024! KT-230145-A (Three-Dimensional Displacement Automatic Measurement Cloud Management System)

• Other measuring instruments

This is a system that performs 3D measurements of the ground and existing structures that may be affected by nearby construction only when necessary. It automatically measures all survey points within the range visible to the total station and acquires the result data into the system, contributing to the labor-saving of measurement tasks. The Mobile Dam System simplifies the process from the installation of the total station to the start of measurement, and also makes the operation of mobile devices simpler than before, allowing even those without specialized knowledge in measurement to easily set up and conduct measurements. As of March 2024, the NETIS number has been updated! KT-230145-A (3D Displacement Automatic Measurement Cloud Management System)

• Bridge Construction
• Road construction
• River construction

The 3D surface measurement system "DAMSYS-Hybrid" scans the measurement monitoring area with a Leica multi-station and visualizes the results on-site. It can simultaneously acquire data from both "points" through prism reflection and "surfaces" through 3D scanning, allowing for rapid understanding of unexpected behaviors. The behavior of slopes and ground can be managed in both the "vertical direction" and the "direction perpendicular to the slope's inclination," enabling automatic detection of displacements over a 24-hour period.

• Other measuring instruments

Centralized management of on-site measurement sensors! You can view everything on a single screen, eliminating the hassle of switching between different software. Additionally, the screen layout can be customized to fit your specific site needs. The renewed version will be available in March 2024. *Some systems may not be supported. Customers with unsupported systems will continue to use the previous version. Thank you for your understanding. NETIS Registration KT-160109-VE

• Measurement and analysis equipment leasing and rental

―Introduction to the Option System― 【On July 12, 2024, the MR visualization system for the option system has resumed sales!】 Using the technology of "GyroEye" developed by Informatics Co., Ltd.*, this system projects an area set with a "3D barrier" as a hologram in real size into the real world. 【Supported Devices】 Microsoft HoloLens 2, Trimble XR10 【Supported Data Formats】 DWG, DXF, IFC *To use this option system, registration for the dedicated app "GyroEye Web Data Converter," which converts CAD data into MR-compatible data, is required. *The 3D barrier and the WEB Data Converter have different coordinate systems, so they do not match perfectly. *There may be instances where it does not operate correctly due to weather conditions. *High-precision projection may not be possible depending on the site environment and weather conditions. *GyroEye is a registered trademark of Informatics Co., Ltd. *For more details on the MR visualization system, please refer to the catalog.

• Bridge Construction
• Steel structure construction
• Reinforced concrete construction

The NETIS number has been updated! KT-230145-A (3D Displacement Automatic Measurement Cloud Management System) *Old NETIS number: KT-130050-VE This is an automatic measurement system that manages 3D coordinates of the position information of bridge construction girders using an automatic aiming total station, displaying the difference from the planned height. With real-time automatic measurement, there is no need to interrupt work for measurement purposes. Displacement data measured can be viewed from a PC in the field office or from remote terminals via a web browser (K-Cloud).

• Foundation construction
• Bridge Construction
• Road construction

The wireless subsidence sensor [Wimos] uses a wireless light-receiving sensor and a rotating laser level to measure subsidence and uplift in real-time. It can be used without any complicated operations or specialized knowledge. NETIS Registration KT-180034-VE 【Features】 ■ Communication speed: Measures 5 sensors in 1 second ■ Resolution: 0.1mm ■ Reception width: Wireless light-receiving sensor approximately 100mm, long light-receiving sensor: approximately 300mm ■ Retains wireless communication setting functions with each terminal ■ Graph display function, data can be saved in CSV format ■ Battery or AC power supply ■ Alerts via email or rotating light when management values are exceeded (optional) *For more details, please download the catalog or contact us.

• Other measuring instruments

"Pile Navi Cloud-V" is a system that enables high-precision pile driving construction while confirming the position and inclination of piles using a non-prism total station. When displaying the differences between design values and actual measurements, it can be checked on an in-vehicle monitor or a remote web browser (K-Cloud). Information such as the amount of deviation from the start to the end of measurement is automatically saved. It can be implemented according to site needs, such as with three-point heavy machinery or all-casing. 【Features】 ■ NETIS registered (Number: KT-220168-VE) ■ Compatible with precast piles and cast-in-place piles ■ Improved accuracy and safety through system management *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Earthworks

Using GNSS (GPS/GLONASS), we measure the position information of the pile center in real time and visually display the positional relationship to the designed pile center coordinates on an onboard monitor. This is a support system for operating cranes and three-point heavy machinery during pile driving construction in ground improvement, enhancing accuracy and work efficiency. It manages the locations for driving piles in precast pile installation and ground improvement work. NETIS Registration KT-220168-VE Patent: No. 6214282

• Guidance Support Device

Using a non-prism total station, the position of the sheet piles is measured, and the entrance and exit of the normals and their inclinations from the actual measurements are visually displayed. The heavy machinery operator can adjust while checking the entrance and exit of the normals before and after the sheet piles on the monitor in the cockpit. <NETIS Registration: KT-220168-VE>

• River construction
• Coastal construction
• Earth retaining wall/foundation reinforcement

This is a system that collaborates with construction management devices to guide the position of piles, visualize and record improvement bodies and construction information. By collecting various construction information in the cloud and sharing it over the internet, it contributes to the management of ground improvement and pile construction, quality enhancement, and the efficiency of report creation. The acquired data is displayed in 3D on a web browser (K-Cloud). *Note: Some construction management devices may not be compatible. NETIS Registration KT-170030-VE Screen provided by Ando & Associates Co., Ltd. Site: Wonogiri Dam sediment control construction

• Earthworks
• Ground improvement
• Ground foundation construction method

This is a system that supports the improvement of construction accuracy and the reduction of finishing work in concrete placement. By attaching 360° prisms to tools such as leveling rods, trowels, and measuring poles, three-dimensional coordinates are obtained using an automatic tracking total station. It allows for real-time height calculations and enables work to be performed while checking the differences from the design values. Measurement screens can also be viewed on smart glasses during the process. NETIS Registration KT-180117-VE This measurement system was jointly developed with Dai Nippon Civil Engineering Co., Ltd.

• Concrete construction

This system allows for surface measurements using a scanner instead of the traditional pinpoint measurements with non-prisms and prisms, providing more detailed results on-site. It manages the measurement area as a surface and visualizes the displacement of the mesh with colors. When pouring concrete in the superstructure of a bridge, it checks the flatness of the pouring surface. It is also possible to display the height difference from the design surface. The measured data can be directly utilized as construction results. NETIS Registration: KT-180118-VE

• Bridge Construction

This is a safety monitoring system that creates a shield by scanning a surface with laser light from a laser scanning sensor, detecting intruding objects, and issuing alarms. <NETIS Registration KT-190131-A>

• Bridge Construction

This is a system that installs an inclination sensor to observe the inclination displacements of vents, sandbags, bridge piers, bridge abutments, and slopes at bridge construction sites. It wirelessly collects data and displays it in a web browser. By continuously measuring inclination at sites with high urgency, it ensures the safety of the site. It operates continuously when connected to a power source, allowing measurement instructions and configuration changes to be made remotely from a computer at any time. NETIS: KT-170096-A

• Bridge Construction
• Earth retaining support
• Tunnel construction

In July 2024, we obtained a NETIS number. NETIS Number: KK-240034-A This is a system that uses a total station and reflective sheets to perform three-dimensional measurements of the differences from the design data, necessary for confirming the dimensions of components and assembly accuracy in the manufacturing and assembly processes of bridge and shipbuilding materials. It allows for precision management aligned with the design coordinate system, regardless of the installed position or orientation of the manufactured components.

• Measurement and analysis equipment leasing and rental

By measuring the distance to the beam with a laser distance meter during the passage of trains or vehicles, the deflection amount is calculated and output. Measurements can be taken at the target measurement points without cables and in a non-contact manner. This significantly improves efficiency compared to traditional contact displacement gauges.

• Bridge Construction

"3D-Field" is a three-dimensional surveying system that displays data in 3D and enables intuitive surveying operations by linking real-world movements with movements within the device. It allows for the creation of existing structures and can also convert BIM and CIM data into 3D. By using an automatic tracking total station, basic surveying tasks such as "positioning" and "surface management with TIN" can be performed by a single person. 【Features】 ■ One-man surveying ■ Freely create sites with 3D data ■ Surface management with TIN ■ Compatible with a wide range of surveying instruments *For more details, please refer to the PDF materials or feel free to contact us.

• Surveying

This is a system that automatically measures slope inclination displacement using a non-contact laser distance meter. It replaces traditional extensometers with a laser distance meter to monitor landslides. While maintaining measurement accuracy, it enhances the efficiency and sophistication of safety management. The acquired data can be checked remotely at any time via a web browser (K-Cloud).

• Tunnel construction
• Road construction
• Earthworks

The system name has been changed from Recos Cloud (internal displacement) to S Point. It is a system that automatically measures distance displacement using a non-contact laser distance meter. By continuously measuring displacements during tunnel construction, the impact of nearby construction, and during bridge girder installation, it contributes to safety management. The acquired data can be checked remotely at any time via a web browser (K-Cloud renewed version).

• Tunnel construction

The current condition survey before pavement work, such as cutting overlays and repaving, is conducted safely and accurately without traffic regulation from sidewalks and shoulders, transforming the previous "ROPO" into 3D measurement. Using non-printing functionality, the shapes in each work type are managed in three-dimensional coordinates. Patent: No. 4059832

• Road construction

This is a system that allows measurement and surveying work for steel frame construction, traditionally conducted using a transit at construction sites, to be performed by one person using a total station and a mobile PC. You can also check the measurement results on the cloud, making it useful for understanding the current situation from locations other than the measurement site, such as the site office. Registered with NETIS in September 2023! <NETIS Registration: KT-230113-A>

• Steel construction

This is a system that monitors the elevation of the track in real-time using a liquid injection method during track repair work. It displays displacement data in real-time via wireless communication (cable-free). Since it measures the height of the rails without interrupting the liquid injection work, it helps in the precise adjustment of the liquid injection amount and the prevention of abnormal elevation. This measurement system was jointly developed with East Japan Railway Company.

• Measurement and analysis equipment leasing and rental

In March 2024, we registered with NETIS. KT-230145-A (3D Displacement Automatic Measurement Cloud Management System) This system safely and efficiently monitors the regular displacement status of tracks using an automatic total station. After the installation of the prism, it is generally unnecessary to enter the track, and the track measurement is conducted semi-automatically.

• Measurement and analysis equipment leasing and rental

In March 2024, NETIS registration was completed. KT-230145-A (3D Displacement Automatic Measurement Cloud Management System) This system performs 3D measurements of track displacements affected by nearby construction using an automatic tracking total station. It is capable of monitoring not only the tracks but the entire construction area in real-time, 24 hours a day.

• Road construction
• Railway Construction
• Surveying

Using the control PC, encoder, and camera mounted on the track inspection vehicle, data such as "obstacles," "obstruction points," "alignment information," and "video" corresponding to kilometer information is saved to the control PC. With the saved video and kilometer information, the above data can be registered and re-verified even in offices outside the field. Patent: No. 6744840

• Measurement and analysis equipment leasing and rental

This is a system that calculates and displays/records the advance and displacement of special switches by surveying the elements that make up the special switch (crossing points, stakes, U-shaped rails, movable rails, slip rails, and basic rails) using an LN-100 and a 360° prism. Compatible special switches: Movable DC (Movable Diamond Crossing) SSS (Single Slip Switch) DSS (Double Slip Switch) This system was jointly developed with East Japan Railway Company. Patent pending.

• Measurement and analysis equipment leasing and rental

With NW cameras, you can monitor the conditions of construction sites in remote locations 24 hours a day. You can also monitor the status of prisms at measurement points, allowing you to understand situations where measurements are not possible due to dirt on the prisms, heavy rain, snowfall, or obstructions.

• Measurement and analysis equipment leasing and rental

This is a system that acquires the WBGT index, temperature, and humidity in real-time and displays them in a web browser (K-Cloud renewed version). The collected data is stored on the web, allowing for easy creation of reports and graphs, which can be utilized in documents such as reports. *For more details, please refer to the PDF materials or feel free to contact us.*

• Other Software

In construction and demolition sites, efforts are made to prevent noise and vibration generated by the work as much as possible, regulated and guided by the Basic Law for Pollution Control, the Noise Regulation Law, the Vibration Regulation Law, and various local ordinances. This is a system that visualizes the vibrations and noise generated at construction sites. It can be used to promote understanding among local residents and to raise awareness and caution among site workers. We offer both rental and sales options.

• Vibration and Sound Level Meter

This is a system and display panel that measures and displays temperature, humidity, atmospheric pressure, wind direction, wind speed, and rainfall. - Signage to be installed on-site - Remote viewing using a web browser - Standalone operation We will propose specifications tailored to the customer's site conditions. It can be useful for preventing heatstroke in summer, making judgments about work interruptions due to strong winds or heavy rain, and managing work processes for the following day, contributing to on-site safety.

• Measurement and analysis equipment leasing and rental

This is a system that uses the automatic tracking function of a total station and a 360° prism to perform positioning, excavation, and installation guidance of structures (such as U-shaped ditches, L-shaped gutters, and pedestrian and vehicle block paving) without the need for setting up reference lines. Its simple configuration allows for use in various measurement applications on different sites. In exterior construction work, it enables easy confirmation of gradients and design heights. For exterior construction such as parking lots, it allows for the creation of a TIN considering water gradients, making height verification at any desired location straightforward. Additionally, the absence of reference lines improves the work efficiency and quality of roadbed and subgrade construction. NETIS: KT-160072-VR This system was jointly developed with Taisei Rotec Co., Ltd. and Chiyoda Soki Co., Ltd. Patent number: No. 6420734

• Road construction