計測ネットサービス List of Products and Services

"Pile Navi Cloud-V" is a system that enables high-precision pile driving construction while confirming the position and inclination of piles using a non-prism total station. When displaying the differences between design values and actual measurements, it can be checked on an in-vehicle monitor or a remote web browser (K-Cloud). Information such as the amount of deviation from the start to the end of measurement is automatically saved. It can be implemented according to site needs, such as with three-point heavy machinery or all-casing. 【Features】 ■ NETIS registered (Number: KT-220168-VE) ■ Compatible with precast piles and cast-in-place piles ■ Improved accuracy and safety through system management *For more details, please refer to the materials. Feel free to contact us with any inquiries.

Using GNSS (GPS/GLONASS), we measure the position information of the pile center in real time and visually display the positional relationship to the designed pile center coordinates on an onboard monitor. This is a support system for operating cranes and three-point heavy machinery during pile driving construction in ground improvement, enhancing accuracy and work efficiency. It manages the locations for driving piles in precast pile installation and ground improvement work. NETIS Registration KT-220168-VE Patent: No. 6214282

Using a non-prism total station, the position of the sheet piles is measured, and the entrance and exit of the normals and their inclinations from the actual measurements are visually displayed. The heavy machinery operator can adjust while checking the entrance and exit of the normals before and after the sheet piles on the monitor in the cockpit. <NETIS Registration: KT-220168-VE>

This is a system that collaborates with construction management devices to guide the position of piles, visualize and record improvement bodies and construction information. By collecting various construction information in the cloud and sharing it over the internet, it contributes to the management of ground improvement and pile construction, quality enhancement, and the efficiency of report creation. The acquired data is displayed in 3D on a web browser (K-Cloud). *Note: Some construction management devices may not be compatible. NETIS Registration KT-170030-VE Screen provided by Ando & Associates Co., Ltd. Site: Wonogiri Dam sediment control construction

This is a system that automatically measures the behavior of structures and slopes 24 hours a day and unmanned, using automatic targeting total stations and GNSS as sensors. By immediately processing the acquired data, it is possible to view three-dimensional displacement information on a PC monitor or remotely via the internet. If data exceeding the pre-set displacement management value (alert value) in the system is acquired, the accompanying alarm system will automatically detect it and send a warning to the registered administrator via email or display lights. The NETIS number has been updated as of March 2024! KT-230145-A (Three-Dimensional Displacement Automatic Measurement Cloud Management System)

This is a system that performs 3D measurements of the ground and existing structures that may be affected by nearby construction only when necessary. It automatically measures all survey points within the range visible to the total station and acquires the result data into the system, contributing to the labor-saving of measurement tasks. The Mobile Dam System simplifies the process from the installation of the total station to the start of measurement, and also makes the operation of mobile devices simpler than before, allowing even those without specialized knowledge in measurement to easily set up and conduct measurements. As of March 2024, the NETIS number has been updated! KT-230145-A (3D Displacement Automatic Measurement Cloud Management System)

A total station with non-prism measurement capabilities measures two points each on the upper and lower diameters of the pile, displaying the difference between the design values and the actual measurements both numerically and visually. This system manages the inclination angle and azimuth angle during the installation of inclined piles, contributing to labor-saving in measurement work and improving quality. 【Features】 ■ NETIS registered (Number: KT-220168-V) ■ Patent pending ■ Compatible with inclined pile construction methods and rotary percussion drills ■ Measurement with a single total station, no need for prism installation ■ Remote data viewing and report output via web browser (K-Cloud) *For more details, please refer to the materials.

This is a system for calculating and displaying the installation position and tilt of H-shaped steel piles during driving. It measures one point each at the top and bottom of the H-shaped steel side using a total station, allowing for real-time confirmation of positional deviations and tilting during installation. The data and visuals are displayed on an in-vehicle monitor, contributing to quality improvement. 【Features】 ■ NETIS registered (Number: KT-220168-VE) ■ Measurement with a single total station, no need for prism installation ■ Remote data viewing and report output via web browser (K-Cloud) *For more details, please refer to the materials.

■Purpose and Evaluation of the 3D Barrier Introduction In the construction of a new factory, a 3D barrier was introduced to manage the distance from high-voltage lines for the use of heavy machinery such as crawler cranes and pile drivers that require work at heights. Previously, monitoring had to be done manually through visual checks or with a transit, but with the 3D barrier, the management area can be freely set, allowing for efficient and safe work. In particular, the system that immediately alerts with an alarm and patrol light when entering the danger zone (11m from the high-voltage line plus a 1m margin) has contributed to a sense of security.