サンワイズ List of Products and Services

The Galari is installed for ventilation, but improving airflow can make it easier for rainwater to enter, and addressing rainwater issues can compromise ventilation. The solution to this conflicting challenge is the vertical waterproof Galari "Ame Shut." Its unique cross-sectional shape prevents rainwater intrusion and performs well even under severe conditions such as storms. This is an aluminum waterproof Galari that prevents rainwater intrusion with its vertical blade structure. It is available in a wide range of opening rates from 34% to 70%. ◇ The unmatched capabilities of "Ame Shut" ◇ ◆ High waterproof performance... It does not allow rainwater intrusion even on rainy days with strong winds. ◆ High ventilation... "Ame Shut" excels in waterproof performance, especially in cases where large-scale ventilation is needed. ◆ High opening rate... Achieved a maximum effective opening rate of 70%. ◆ Diverse items... We offer a variety of items to suit all environments.

• Prefabricated Door Louvers
• Ventilation openings
• Interior/Interior Doors

The interior of the door is a lightweight steel sliding door that uses an aluminum frame with honeycomb material and foam insulation. It can be used for a wide range of applications, from human entry to the transport of large machinery. The interior consists of a lightweight steel sliding door made of an aluminum frame, honeycomb material, and styrene foam, with a surface material made of thin steel plates ranging from 0.4mm to 0.8mm, allowing for easier opening and closing compared to standard steel sliding doors. There are three types of opening and closing mechanisms available: manual, self-closing, and automatic. The rail cover can also be optionally equipped with a sanitary cover (sloped cover). The guide block is stored inside, and the opening is sealed with a rubber seal to enhance airtightness. In addition to being shipped with rust-proof paint, it can also be shipped with baked-on paint in specified colors. It is possible to change the viewing window and edge material to stainless steel, resulting in a highly customizable lightweight steel sliding door. *1 Two locations (one set) at the door head and door tail. * This door does not qualify as a specific fire protection facility or fire protection equipment. Customers considering its use as fire protection equipment according to structural regulations should contact our sales representative. * A 1.6mm thick steel edge material surrounds the door body.

• Interior/Interior Doors
• Steel Door
• Sliding door

The Role and Issues of Smoke Curtains The most terrifying aspect of building fires is accidents caused by "smoke." Smoke curtains are smoke barriers defined by building codes, consisting of walls that hang down at least 50 cm from the ceiling. They block the flow of smoke during a fire, allowing for a longer evacuation time. However, there have been frequent secondary disasters where the glass of smoke curtains, which are supposed to protect lives, has broken or fallen, causing injuries. This issue was highlighted during major earthquakes such as the Great East Japan Earthquake and the Kumamoto Earthquake. As a result, there is a need for new flame-retardant curtains that can solve these problems, and flame-retardant curtains made of durable and lightweight non-combustible sheets are currently gaining attention. ◇ Slim Panel Type ◇ Tension Type ◇ Transparent Type ◇ Opaque Type The "Kemushatto" non-combustible sheet uses industry-leading transparent sheets that have received non-combustible certification from the Ministry of Land, Infrastructure, Transport and Tourism. In addition to high transparency (light transmittance of over 90%), it also has an anti-static function, which not only prevents secondary disasters caused by the scattering of smoke curtains but also significantly improves workability by reducing static electricity and dust adhesion during operations.

• Other wall materials
• others

■Peripheral Materials■ Aluminum channel / Resin channel / Aluminum rail / Aluminum connecting channel / Others ■General Aluminum Profiles■ Equal angle / Unequal angle / Flat bar / Channel (U-shaped) / Square bar / Square pipe / Flat square pipe ■Profile Processing■ Cutting and perforating of aluminum profiles. We also respond to requests for cutting, end processing, perforating, and countersinking of peripheral materials for panel construction and general profiles to specified dimensions. Opening Decorative Frames We offer three types of opening decorative frames: - Aluminum opening decorative frame - Steel opening decorative frame - Stainless steel opening decorative frame Aluminum Bending / Stainless Steel Bending We also handle various aluminum and stainless steel bending. We can suggest plate thickness and shapes according to the application. ■Building Hardware■ The manufacturing of doors requires various components, especially for custom-made products. Sanwaise leverages extensive knowledge and information gained from partnerships with many hardware manufacturers to propose various building hardware tailored to the usage location and environment. Slide register Perforated plate Door stay Electric door closer Door stop, etc.

• others
• Interior and exterior construction accessories

◇Aluminum Cart Guard◇ An aluminum cart guard that protects walls from damage caused by cart collisions. It is also easy to install on walls. ◇Plastic Cart Guard◇ A plastic cart guard that protects walls from damage caused by cart collisions. It is suitable for places where metal cart guards cannot be used due to the chemicals being used.

• others
• Interior and exterior construction accessories

◇Easy to install R skirting boards◇ It can also be used in combination with aluminum cart guards. The area where the walls and floor of a room meet is at a right angle, making it easy for dust to accumulate in that space. R skirting boards eliminate such spaces by incorporating an R shape, making cleaning easier. They are ideal for various facilities that require constant cleanliness (clean rooms, food factories, semiconductor manufacturing plants, pharmaceutical factories, hospitals, etc.). It is also recommended in HACCP guidelines to have an R shape at the boundary between walls and floors. ◇Aluminum R skirting boards◇ These are aluminum R skirting boards. By adding an R shape to the skirting board, it becomes easier to clean the corners of the floor, making them perfect for places that need to maintain a clean environment, such as food factories and clean rooms. ◇Stainless steel R skirting boards◇ These R skirting boards are suitable for areas where aluminum cannot be used, such as places that use chemicals. There are two types: the Metal Wrap series, which has stainless steel wrapping on an aluminum base, and 1.0mm stainless steel pressed products. ◇Plastic R skirting boards◇ These are plastic R skirting boards. Adding an R shape to the skirting board makes it easier to clean the corners of the floor. They have no hollow spaces on the back, preventing insect pathways. They are also ideal for places where metal R skirting boards cannot be used due to the chemicals involved.

• others
• Interior and exterior construction accessories

Lightweight partitions and RC walls supported! A wall that can be removed only when needed. This removable machine hatch is convenient for use as a wall on a daily basis and for creating an opening for large machinery replacement or maintenance that occurs a few times a year or once every few years. The outer frame attached to the wall is made of aluminum extruded material, and the frame depth can be set in 10mm increments from 110mm to 200mm. We attach welding anchors to the frame according to the frame depth dimensions before shipping, allowing for flexible responses to welding fixes for lightweight partitions and RC walls. It can also be made without a bottom frame for three-sided frames, which can facilitate the entry and exit of large machinery, but unevenness in the floor can affect the installation, so it is necessary to ensure a level floor surface. In four-sided frames, the bottom frame can often be an obstruction, but it can be made removable.

• Special function opening
• Interior/Interior Doors
• Interior construction

◇High-altitude pressure adjustment function option◇ It can be supported with options other than the general pair. Typical double-glazed glass has a layer (the hollow layer) between the panes that is completely sealed. During the day, when the temperature rises, the air inside the hollow layer gets heated and expands, causing the glass to warp, which in turn distorts the reflected image. Additionally, the hollow layer of double-glazed glass also expands and contracts due to changes in air pressure. This is the same principle as when a snack bag or a plastic bottle swells up when you go climbing. This change in air pressure is also one of the causes of the distortion in the reflected image.

• Plate glass and mirrors

This is an all-stainless steel automatic sliding door that is directly attached to the wall. It is designed with a structure that considers installation on fire-resistant insulated panels, and can be used as a fire protection facility and a specific fire protection facility according to structural regulations. Like steel models, it automatically closes in conjunction with fire alarms and is equipped with an emergency battery that allows it to close automatically even during power outages. The automatic door engine is compatible with products from Fuso Electric Industry and Hashida Giken. *1 While it is a fire protection facility and a specific fire protection facility according to structural regulations, the interpretation of these regulations may vary by administrative region. We will assist with drawings, so please be sure to confirm with the administrative agency that has jurisdiction over the installation area. *2 It can also be made without a battery.

• others
• Steel Door

Can be retrofitted to fire-resistant panels! This is a stainless steel sliding door with a direct-attachment rail specification that is resistant to rust. It is designed with installation on fire-resistant insulated panels in mind, and can be used as a fire protection facility (with 6.8mm wire-reinforced glass window or without window) or as a specific fire protection facility (only without window). Both single and double sliding options are available. *1 It can also be adapted to walls other than fire-resistant insulated panels. Please contact us for details. *2 While it complies with structural regulations for fire protection facilities and specific fire protection facilities, the interpretation of these regulations may vary by administrative region. We will assist with drawings, so please be sure to confirm with the administrative agency that governs the area where it will be installed.

• others
• Steel Door

This is a stainless steel sliding door with excellent weather resistance. Except for some visible parts, it is made entirely of stainless steel, making it suitable for rooms where aluminum or steel cannot be used due to chemical resistance and other factors. The surface material of the door itself is made of stainless steel plate as thin as 0.5mm, and the interior consists of an aluminum frame and either paper honeycomb or styrene foam, allowing for very lightweight opening and closing compared to typical stainless doors. It is available in three types: manual, self-closing, and automatic, and the stainless steel rail cover can optionally accommodate a sanitary cover (sloped cover). The guide block is stored inside, and a rubber seal is rotated at the opening to enhance airtightness. The surface material can also be made of colored steel plates or aluminum in addition to stainless steel plates. It can accommodate different surface materials on each side, such as one side being stainless steel and the other side being colored steel. The guide block is located at two points (one set) at the leading and trailing edges of the door.

• others
• Steel Door

Automatically opens and closes, even in emergencies! This is an automatic sliding door that complies with fire protection equipment and specific fire protection equipment regulations. It automatically closes upon receiving signals from fire alarms or smoke detectors, and as a standard feature, it is equipped with an emergency battery, allowing it to close automatically even if power is cut off during a fire. The automatic door engine is compatible with products from Fuso Electric Industry and Hashida Giken. *1 We believe that it meets the requirements for specific fire protection equipment, but interpretations may vary depending on the inspecting administrative agency, so please be sure to check with the relevant administrative agency in your installation area beforehand. *2 It can also be configured without a battery.

• Special function opening
• others

A direct-attach steel sliding door that can be added to fireproof insulation panels! This is a type of steel sliding door that attaches directly to the wall with rails. It is designed with installation on fireproof insulation panels in mind, and can be used as a fire protection facility (with a 6.8mm wire glass window or without a window) or as a specific fire protection facility (only without a window). It supports single and double sliding configurations. *1 It can also be adapted for walls other than fireproof insulation panels. Please contact us for details. *2 We believe that it meets the requirements for fire protection facilities and specific fire protection facilities; however, interpretations may vary depending on the administrative agency conducting the inspection, so please be sure to confirm with the local administrative agency in advance.

• Special function opening
• others

A built-in steel sliding door that fits neatly within the wall! This is a type of sliding door that is stored within a lightweight partition wall. Since the overhead rail is also built into the wall, it is designed to minimize dust accumulation on the top of the rail, making it easy to clean. It comes standard with a sliding closer without a rail stop, and the surface material is made of 1.6mm steel plate. It can be used with a window as a fire protection device, or without a window as a specific fire protection device. *1 The compatible thickness for the lightweight partition wall is only 115mm. *2 Only 6.8mm wired glass. *3 This product meets the requirements of relevant laws and regulations for specific fire protection devices and fire protection equipment; however, interpretations of the law may vary depending on the administrative agency conducting the inspection. It is recommended to confirm the legal compliance of this product with the administrative agency in the area where it will be installed.

• Other fittings
• others

The ISI series can be used as a dedicated interlock control panel for opening doors; however, it cannot be used for interlock control with automatic sliding doors or retrofitted electromagnetic locks and pin-type solenoid locks without designing and manufacturing a dedicated control panel each time. When interlocking control is applied between automatic sliding doors, it is often controlled solely by exchanging signals between the controllers of the automatic sliding doors. This leads to the problem that both doors may open when the activation switches are turned ON almost simultaneously. To resolve these issues, we have prepared a dedicated adapter for the ISI series interlock control panel. The ISI-AD is an adapter that enables interlock control for automatic sliding doors, retrofitted electromagnetic locks, and pin-type solenoid locks, and it can be used with the ISI series. It is compact in size, fitting into a single switch box or within the rail of an automatic sliding door. For interlock control of automatic sliding doors, it is a prerequisite that the controller of the automatic sliding door has interlock signal input/output terminals, and it is essential to use the ISI series interlock control panel for interlock control.

• Hardware Doors, Handles and Locks
• others

This is an option box used when you want to unlock one or two pairs of doors with interlock using card readers, keypads, fingerprint verification, etc. It is used in conjunction with the interlock control panels ISI-2, ISI-4, 8, 16, and 32. ■ Compact and smart appearance ■ Compatible with both powered locking and powered unlocking electric locks * * Powered unlocking electric locks can only be used for doors that are unlocked through verification. The ISI-L cannot be used alone. It must be used in conjunction with the ISI series. By adding the standby locking option "ISI-L2" to the interlock control panel "ISI series," it becomes possible to change the control of two pairs of electric lock doors per unit to be managed by card readers or biometric authentication. * When applying interlock, it is necessary to have a device that sends some locking signal, such as a card reader or "unlock button," on the exit side of the door as well.

• Hardware Doors, Handles and Locks
• others

Outer frame shape and dimensions are flexible! ◇ Stainless Steel Door DSU40/45/50/60 ◇ This is a stainless steel flush door with high weather resistance, which can also accommodate fire protection equipment. Similar to steel flush doors, you can choose the outer frame shape, dimensions, and whether or not to include packing. It is essential in locations where fire protection equipment is required for building safety, or where iron or aluminum cannot be used due to salt damage prevention or the use of saltwater and chemicals. Fixing to the wall can be done similarly to steel flush doors, either by welding with anchors or by screw fixing. *1 The fire protection equipment referred to here means specific fire protection equipment (in cases without windows) and fire protection equipment in general. *2 This product meets the requirements of relevant laws and regulations for specific fire protection equipment and fire protection equipment; however, interpretations of the law may vary depending on the administrative agency conducting the inspection. It is recommended to confirm the product's compliance with regulations with the local administrative agency before installation. *3 Depending on the size and weight of the door, it may not be possible to accommodate screw fixing. Please contact us for more details.

• Steel Door
• others

This is a lightweight stainless steel door that complies with fire protection regulations, using a stainless steel frame with excellent weather resistance. It is suitable for fire protection equipment in clean rooms and food factories where aluminum or steel cannot be used. Since all visible parts are made of stainless steel, except for some hardware, it is resistant to rust, and the surface material can be made of 0.8mm stainless steel plate, allowing it to be used as fire protection equipment according to structural regulations. We respond to the demand for stainless steel fire protection equipment (fire doors) that anyone can easily open and close. *1 The 0.8mm stainless steel plate is not part of our standard inventory, so please check with your sales representative regarding delivery times in advance. *2 We believe this product meets the requirements of relevant laws and regulations as fire protection equipment; however, interpretations of the law may differ depending on the inspecting administrative agency. We recommend confirming the compliance of this product with the relevant administrative agency in the area where it will be installed in advance.

• Steel Door
• others

This is a genuine steel soundproof door that meets the JIS sound insulation performance T-3 grade, even with a three-sided frame without a bottom frame. Of course, it also meets the JIS sound insulation performance T-3 grade with a four-sided frame that includes a bottom frame. By adopting a double packing on the outer frame and incorporating a bottom device to enhance airtightness, the door's sound insulation performance is secured. It can also be equipped with a door check as an option and can be used as a specific fire protection facility according to the specified specifications. *1 This is the result of tests conducted by a testing organization and is not a guaranteed value for the installation site. Additionally, the sound insulation performance of the three-sided frame specification may not be fully realized due to uneven flooring. *2 We believe that it meets the requirements for specific fire protection facilities, but opinions may vary depending on the administrative agency conducting the inspection, so please be sure to check with the administrative agency in your installation area in advance.

• others
• Other fittings

This is a specific fire protection device with an automatic closure feature in the event of a fire. It is a specific fire protection device with an automatic closure feature. The release hook is disengaged by signals from smoke detectors or fire alarms, and it closes automatically. You can choose the angle of the open hold (90° or 180°) and whether to include an escape crawl door, and you can also specify the opening direction of the crawl door based on the evacuation direction. It is made to custom dimensions with high precision in 1mm increments. * We believe that it meets the requirements for specific fire protection equipment, but opinions may vary depending on the inspecting administrative agency, so please be sure to confirm with the relevant administrative agency in the installation area in advance.

• others
• Other fittings

Free choice of outer frame shape and projected dimensions! This is a steel flush door that meets the structural regulations for specific fire prevention equipment*1 and fire prevention equipment*2 under the Building Standards Act. You can freely select the shape of the outer frame, projected dimensions, and the presence or absence of airtight packing, and there are specifications available for exterior wall surfaces. The finish includes rust-proof paint, and as an option, we can also provide powder coating in our standard color (white-gray) or specified color baked paint using solvent-based paint. In the case of baked paint, it is also possible to install the glass at the factory before shipping. In addition to welding the frame to the wall with anchors, it can also be secured with screws*3. In that case, we will process countersunk holes for the screws before shipping. *1 Specific fire prevention equipment can only be applicable when there are no windows. *2 Fire prevention equipment can only be applicable when using wired glass. *3 Depending on the size and total weight of the door, it may not be possible to accommodate this. Please contact us for more details. ■ Since it is a specific fire prevention equipment and fire prevention equipment that meets structural regulations, no certification documents are required. *While we believe that we meet the requirements for specific fire prevention equipment and fire prevention equipment, opinions may vary depending on the administrative agency conducting the inspection. Please be sure to confirm with the administrative agency in the installation area in advance.

• Other fittings
• others

This is a lightweight steel door designed to meet fire protection equipment standards, using 0.8mm electric galvanized steel plate (bonded steel plate) for the surface material and ceramic honeycomb for the core material, classified as a structural specification (also referred to as example specifications). The interior of the door utilizes an aluminum frame, achieving weight reduction while maintaining a steel construction. Options for installing windows or grilles are available, and a 1.6mm thick steel edge material surrounds the door body. *Note 1: We believe this product meets the requirements of relevant laws and regulations for fire protection equipment; however, interpretations of the law may vary depending on the inspecting administrative agency. We recommend confirming the product's compliance with local administrative agencies in the area where it will be installed in advance. *Note 4: Please inquire about the fire resistance performance when a grille is installed.

• others
• Other fittings

The interior consists of a lightweight steel door made of an aluminum frame, honeycomb material, and styrene foam, with a surface material of thin steel plates ranging from 0.4mm to 0.8mm. In addition to being shipped with rust-proof paint, it can also be shipped with baked-on paint in specified colors. It is possible to change the peephole and edge materials to stainless steel, making it a highly customizable lightweight steel door.

• Other fittings
• others

The biggest feature of the ultra-lightweight steel flush door "DSR40" is that it is incredibly light. The thickness of the steel plate used for the door itself is 0.4mm, which is about 1/4 of a typical steel door and half the weight compared to a standard lightweight steel door. The frame is made of aluminum extrusions, and strength is maintained with honeycomb material and insulation. The outer frame is made of approximately 1.6mm thick bent steel plate, allowing it to be installed in various wall types. Surrounding the door is a silver aluminum edge, providing a metallic accent. This ultra-lightweight steel flush door is utility-friendly for general construction walls, accommodating various options such as windows, grilles, Gremlin handles, and auto bottoms. *Note: It does not qualify as a specific fire protection facility or fire protection equipment. For fire protection equipment for lightweight steel doors, please refer to "DSST-A" or "DSST-R." Manufactured by a cleanroom door manufacturer with high dimensional accuracy, all doors are custom-made to 1mm increments.

• Steel Door
• others

This is a frame door that can accommodate lightweight partitions and RC walls. The outer frame that attaches to the wall is made of aluminum extruded material with a silver anodized finish, preventing cracking of the anodized surface like that seen in bending. ◇DKZ30◇ The outer frame, which can freely set the projection dimensions, is made of aluminum extruded material and features a smart finish without the typical anodized cracking associated with bending. The projection dimensions can be specified in 10mm increments from 110mm to 200mm, and welding anchors tailored to the frame projection dimensions are attached before shipping. It can use latch-type locks, and you can choose between two types: one with a middle rail that divides the upper and lower panels and one without a middle rail. The specification without a middle rail can also be made into a full panel louver door (yoroido). The color is only available in silver (matte). ◇DKZ40◇ This is a frame door specifically designed for large doors that can accommodate lightweight partitions and RC walls. Like the DKZ30, it uses an outer frame that allows projection dimensions to be freely set from 110mm to 200mm and supports both screw and welding fixation. Specifications that require large windows or louvers in large doors, which are difficult to achieve with flush doors, can be realized with aluminum frame doors.

• Aluminum alloy door
• others

A versatile flush door that can set the dimensions according to wall thickness. This flush door can accommodate lightweight partitions and RC walls, allowing for adjustable outer frame dimensions. The outer frame attached to the wall is made of aluminum extruded material with a silver anodized finish, preventing issues like cracking that can occur with bending. Additionally, the frame depth can be specified in 10mm increments from 110mm to 200mm, and we will attach welding anchors that match the specified frame dimensions before shipping. The lock can be equipped with latch-type locks such as lever handles or round knobs, as well as Gremon handles or electric locks. The four-sided frame has a stainless steel bottom. In the case of a three-sided frame, the bottom of the door includes an adjustable rubber with a shifting function, and there is also a door bottom specification that meets airtight performance grade A-4. Furthermore, it is possible to add a stainless steel kick plate at the bottom as an option. Manufactured by a cleanroom door manufacturer, this product boasts high dimensional accuracy, with all custom dimensions made to the nearest millimeter.

• Hardware Doors, Handles and Locks
• Aluminum alloy door

This is a sliding door of the Infit type that can be opened and closed with light force. The Kamachi type uses an aluminum frame, allowing for a fully transparent panel, and it is also possible to have larger ventilation holes (grilles). The two-panel design does not have a guide rail on the floor, so there is no need to clean the grooves of the guide rail, and there are no steps on the floor. The four-panel design uses an embedded guide rail, but it can accommodate widths of up to 4.2 meters, allowing for a large opening of nearly 2 meters in effective opening size*1. *1 The maximum production range is 1982mm in UW dimensions.

• Sliding door
• Interior/Interior Doors
• Aluminum sash

Large door compatible! This is a sliding door with a hanger type that can be opened and closed with light force. The panel type can use color steel plates or stainless steel plates for the surface material, allowing for a design that matches wall panels and other doors. In the two-panel configuration, there is no guide rail on the floor, eliminating the need to clean the guide rail groove and preventing any floor level differences. Both the two-panel and four-panel configurations can accommodate widths of up to 4.2m, allowing for a large effective opening of approximately 2m. *The production range is 2012mm for the two-panel configuration and 1982mm for the four-panel configuration, but this is with a lower guide rail.

• Sliding door
• Interior/Interior Doors
• Aluminum sash

Here is the product detail page: https://www.sunwizz.co.jp/product-db/item_58 *You will be redirected to the official Sunwizz website. ◇ The data provided is intended solely for the purpose of considering the adoption of our products and for related design purposes. ◇ Please use this data strictly for design consideration. Note that the dimensions are Not to scale (NTS). * There is also an aluminum gallery type with a single side flange. Product details: https://www.sunwizz.co.jp/product-db/item_57 *You will be redirected to the official Sunwizz website. Contact: info@sunwizz.co.jp Website: https://www.sunwizz.co.jp/ Please download and use this data only if you agree to all the "Notes" in the basic information below.

• Ventilation openings
• Ventilation and smoke exhaust equipment
• Prefabricated Door Louvers

Here is the product detail page: https://www.sunwizz.co.jp/product-db/item_59 *You will be redirected to the official Sunwizz website. ◇ The data provided is intended solely for the purpose of considering the adoption of our products and for related design purposes. ◇ Please use this data only for design consideration. Note that the dimensions are Not to scale (NTS). *There is also a double-sided flange type aluminum gallery type that can be used sandwiched between a certain wall thickness. Product details: https://www.sunwizz.co.jp/product-db/item_58 *You will be redirected to the official Sunwizz website. Contact: info@sunwizz.co.jp Website: https://www.sunwizz.co.jp/ Please download and use this data only if you agree to all the "Notes" in the basic information below.

• Ventilation openings
• Ventilation and smoke exhaust equipment
• Prefabricated Door Louvers

◇Tent House Construction◇ Tent house construction refers to the process of building a structure by covering a steel frame with canvas (tent fabric sheets) for the roof and exterior walls. Compared to traditional construction methods, it allows for lower costs and shorter construction periods. The membrane structure of a tent house can create large open spaces without columns, and due to the translucency of the membrane material, it allows for natural light to enter even in enclosed spaces. From a structural perspective, it is highly durable, and in terms of spatial design, the natural light that passes through the membrane material creates a bright and spacious impression.

• Sports related facilities
• Large tents and tent warehouses
• Car and bicycle parking facilities

The ISI series is a control panel specifically designed for interlock control between doors. It offers five types based on the number of doors used, ranging from simple interlocks for two pairs of doors to complex configurations for up to eight pairs of doors, including options for 2 pairs, 4 pairs, 8 pairs, 16 pairs, and 32 pairs. Additionally, it allows for the configuration of door control methods on-site. ◇ Simple and practical design ◇ Utilizes a two-core cable that is compatible with various piping materials ◇ Electric lock signal lines feature one-touch connections via connectors ◇ Compatible with electric locks that are locked when powered, with specifications of 24V and 450mA or less, including Gremon handles, lever handles, and round knobs ◇ Optional metal conduits available for surface mounting ◇ Multiple control panels can be housed in a single box, maintaining a simple and practical design.

• Entrance and exit control system

This is a versatile sliding door that can accommodate lightweight partitions and RC structures, suitable for a wide range of applications from standard door sizes to large sizes for the entry and exit of heavy machinery. It is an ultra-lightweight steel sliding door that can be used for various purposes, from pedestrian access to large doors for heavy machinery. The frame of the opening can be selected from aluminum, steel, or stainless steel, all of which feature a rubber seal that closes the gap between the door and the frame. The opening and closing methods include manual, self-closing, and automatic options. Additionally, it is possible to have the rail cover as a sanitary cover (sloped cover) as an option. The guide blocks are stored inside the door at two locations, at the leading edge and the trailing edge, for each set.

• Sliding door
• Automatic door opening and closing devices for entrances and exits (auto doors)
• Entrance/Exterior Doors

One-touch release! This is an indoor inward-opening smoke vent window used when a light and smoke exhaust system is needed for a partition adjacent to the exterior wall of a building. In addition to single glass, multilayer glass and opaque non-combustible aluminum composite panels (which do not allow for light) can also be used for the opening and closing section. The panel itself can be easily tilted inward with one touch by the operator, and the opening angles can be specified at 45 degrees, 60 degrees, or 85 degrees.

• Special function opening
• Disaster prevention supplies

One-touch release! This is an indoor inward-tilting smoke exhaust panel used when smoke exhaust equipment is required for partitions adjacent to the exterior walls of a building. The panel is made of an aluminum frame and non-combustible core material, and the surface material can be specified to match the partition specifications, such as colored steel plates or stainless steel plates. The panel itself at the opening can be tilted inward with one touch by the operator, and the release angle can be specified in three options: 45 degrees, 60 degrees, or 85 degrees.

• Special function opening
• Disaster prevention supplies

This is a full flat FIX window that eliminates the frame, aligns the thickness of the clean panel surface with the glass surface, and thoroughly removes unnecessary irregularities. It is a FIX window designed with GMP in mind for pharmaceutical manufacturing plants, pursuing ease of cleaning by completely eliminating unnecessary irregularities. By removing the window frame itself, it eliminates the hassle of regularly cleaning and removing dust and powder that accumulates in the thickness of the frame. Additionally, by using multi-layer glass that has nearly the same thickness as the wall panel for the surface panel, it also eliminates any step difference between the surface panel and the window frame. It is compatible with clean panels from some manufacturers that are 36mm to 44mm and 50mm, and as long as the fitting material (concave shape) of the compatible manufacturer's clean panel is present around the opening, it can be easily installed using the included mounting hardware (caulking work is required). *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other fittings

This is a steel self-closing sliding door that has been certified by the Minister of Land, Infrastructure, Transport and Tourism as a specific fire prevention device (fire door). It has obtained certification with transparent glass that does not have any mesh, ensuring a clear line of sight even in fire compartments. It is a type that attaches the rail directly to the wall, allowing for installation at a later time. Additionally, it has a three-sided frame without a bottom frame, eliminating any step and allowing for smooth passage of carts and other items. Shipping with solvent-baked coating is also possible from our own factory.

• Special function opening

The "DSST-A40" is the only lightweight steel door in the lightweight steel door series that is certified as a fire protection device (fire door) by the Minister of Land, Infrastructure, Transport and Tourism. In addition to having a transparent glass window, it is also certified for use with electric locks, making it suitable for rooms that require security management, such as access control, and it is compatible with interlock systems. Furthermore, in line with the philosophy of the "DSST series," it achieves weight reduction of the door by combining an aluminum internal frame with honeycomb material. *For more details, please refer to the PDF materials or feel free to contact us.*

• Interior/Interior Doors

The "SKU50" is a stainless steel framed sliding door that is highly decorative and excellent in weather resistance. By combining the door panel and side fixed panels, it can be used as an entrance to a building, making it convenient when you want to have large windows. The frame has a small visible dimension, giving it a clean appearance, and since it consists only of a stainless steel frame and panel, it is very lightweight. The stainless steel material used is SUS304, which has excellent weather resistance, and the standard finish is a hairline that matches any scene. For safety measures, various protective fences for automatic doors are available as options. Typically, glass work is separate, but at Sanwise, we can also undertake glass work, accommodating custom orders in 1mm increments for WH dimensions, frame projection dimensions, and frame widths.

• Stainless steel copper door
• Steel Door

The "Legacy Shield" series "CXT-A," a certified fire protection equipment, features a FIX window made of transparent heat-resistant tempered glass without mesh. It has obtained certification from the Minister of Land, Infrastructure, Transport and Tourism when paired with our specified heat-resistant tempered glass. The lower frame is tapered, allowing it to be used as a specific fire protection device for clean rooms. We primarily ship it with baked-on paint from our own factory and fitted with specialized heat-resistant tempered glass. Additionally, you can trust us with the installation work on-site. *For more details, please refer to the PDF document or feel free to contact us.

• Window and shutter openings
• Mouldings and decorative windows

As long as there is a power supply, it can be easily retrofitted. Compatible with both swinging and sliding doors. With the automatic opening and closing devices and various sensors that we sell and install, it is possible to convert existing doors into ones that can be opened and closed without touching them. As long as there is a power supply, installation is simply a matter of attaching the device and sensors. Compatible with both swinging and sliding doors. We offer sensors that open when you wave your hand, as well as those that open when a person approaches the door. *For more details, please refer to the materials. Feel free to contact us as well.

• Automatic door opening and closing devices for entrances and exits (auto doors)

It is a highly flexible grille made of steel. We offer four types: "GTS," a single-sided flange surface-mounted type; "GT," a double-sided flange clamping type; "GTI," an indoor partition type that allows specification of the projection dimensions according to wall thickness; and "GTO," an outdoor version. 【Lineup】 ■ Single-sided flange type with free wall thickness! "GTS" ■ Double-sided flange clamping type! "GT" ■ Compatible with building walls and allows specification of projection dimensions! "GTI" ■ Can be used on exterior walls with a water drainage feature! "GTO" *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Ventilation openings
• Door Accessories

This is a square grille made of 1.5mm thick stainless steel plate. We offer four types: "GU," which is a double-sided flange clamping type; "GUS," which is a single-sided flange surface-mounted type; "GUI," which is for indoor partitions and allows for specified dimensions according to wall thickness; and "GUO," which is for exterior walls and comes standard with a simple eave and water drainage. All specifications allow for the selection of two types of blade shapes: gabled and single-sloped. Dimensions can also be specified in 1mm increments. *Note 1: The exterior wall type is only available in single-slope. *Note 2: Some dimensions for height cannot be manufactured. The blades come with a rain return, but they are not completely waterproof. In the case of rain accompanied by wind, there may be water intrusion. 【Lineup】 ■ Double-sided flange clamping type "GU" ■ Single-sided flange type with free wall thickness "GUS" ■ Compatible with building walls and allows for specified dimensions "GUI" ■ Usable for exterior walls with water drainage "GUO"

• Ventilation openings
• Door Accessories

Our company offers a wide range of specialized fixtures such as "doors" and "windows" with higher functionality than those for general buildings, used in factories, clean rooms, and various testing laboratories! 【Example of fixtures featured in the catalog】 ◎ Ideal for low-temperature clean rooms: "Plastic Insulated Flush Door" ◎ Lightweight with a smart appearance: "Aluminum Frame Sliding Door" ◎ Suitable for large machinery loading and unloading: "Removable Machine Hatch" ◎ Fusion of sliding and flush doors: "Sliding Plus Door" ◎ No glass work required! Easy installation: "Aluminum FIX Window" Most products can be custom-made to 1mm increments! ★ Currently, we are offering a comprehensive catalog that covers all products ★ You can view an excerpt version by selecting "Download." If you would like the complete version, please request it through "Contact Us."

• Clean Room
• Interior/Interior Doors
• Steel Door

This is an aluminum R-shaped baseboard. By adding an R to the baseboard, it becomes easier to clean the corners of the floor. It is ideal for places where a clean environment is desired, such as food factories and clean rooms.

• Synthetic Resin Plywood
• others