IDAJ List of Products and Services

In "CONVERGE," the Adaptive Mesh Refinement (AMR) feature allows the solver to automatically control the appropriate mesh based on the gradient of the analysis variables. This example demonstrates the analysis of supersonic flow fields around a wing calculated using "CONVERGE," showing that shock waves can be predicted with very high resolution thanks to AMR. 【Features】 - The solver automatically controls the appropriate mesh based on the gradient of the analysis variables. - Shock waves can be predicted with very high resolution due to AMR. *For more details, please refer to the PDF document or feel free to contact us.*

• Scientific Calculation and Simulation Software
• Analysis and prediction system

In "CONVERGE," the solver automatically generates the analysis mesh during the calculation execution. As a result, it is possible to perform calculations with very high efficiency for moving boundary problems involving complex rotational motions, such as those found in two-axis screw compressors. 【Features】 ■ The analysis mesh is automatically generated by the solver during calculation execution. ■ Calculations can be performed with very high efficiency. *For more details, please refer to the PDF materials or feel free to contact us.

• Scientific Calculation and Simulation Software
• Analysis and prediction system

We would like to introduce a case where Rinsan Industries utilized 'ANSYS Fluent' for cost reduction and performance improvement of hydraulic control devices. The in-house flow calculation tool that had been used until now did not provide sufficient accuracy, and it was only used to confirm trends. However, with 'ANSYS Fluent,' a good accuracy of -1.4% has been achieved, and it is expected to be applicable to future analysis cases. Additionally, the number of prototypes has decreased, and there is no longer a need to wait for prototypes to be completed, which has contributed to a more efficient reduction in overall development costs. 【Features】 ■ Reduction of the number of prototypes and man-hours, and also used to avoid worst-case scenarios ■ Achieved good simulation accuracy of -1.4% ■ Can be used to identify and avoid anticipated worst-case scenarios through combinations of upper and lower limits of design tolerances ■ Now able to quantitatively confirm how well the design range fits within the required range *For more details, please refer to the PDF document or feel free to contact us.

• Scientific Calculation and Simulation Software
• Analysis and prediction system

We would like to introduce a case where Toyo Tire & Rubber Co., Ltd. utilized 'modeFRONTIER' and 'DEP Mesh Works/Morpher' for the advanced development of tires. There are multiple design factors for tires, and understanding their relationships with the human mind is not an easy task. By linking our in-house structural analysis tools with 'DEP Morpher' and 'modeFRONTIER', we can present solution sets that were previously unimaginable to human thinking. By performing various result processing to visualize these, we can make it easier to understand and provide designers with guidance on the design direction. The design guidelines obtained from these analyses have received feedback from automotive manufacturers as being logical and persuasive. 【Features of modeFRONTIER】 ■ A new optimization tool that supports "thinking" ■ Richly equipped with unique methods and functions to meet the needs of design and development sites ■ High support from many users ■ Ability to build a distributed execution environment using multiple machines without using general NQS *For more details, please refer to the PDF materials or feel free to contact us.

• Scientific Calculation and Simulation Software
• Analysis and prediction system

We would like to introduce a case where Toyota Motor Corporation utilized "modeFRONTIER for Calibration" (hereafter mFC) in model-based calibration tasks for engine development. To achieve high efficiency, low fuel consumption, and low emission engines, the increasing complexity of engine control systems, including VVT, EGR, turbocharging, and direct injection, necessitates determining optimal control constants while considering constraints and trade-offs such as ride comfort, vibration, and noise. This requires an increase in testing on engines and vehicles, making the reduction of exponentially increasing calibration workload an urgent issue for the entire industry. Moreover, due to the complexity of the phenomena involved, relying solely on the experience, knowledge, and skills of calibration specialists has its limits in finding suitable calibration values. With the introduction of mFC, a series of tasks necessary for Model-Based Calibration (MBC), including sequential Design of Experiments (DoE), measurement, sequential modeling, and accuracy verification, have been automated. **Features of modeFRONTIER** - A new optimization tool that supports "thinking" - Richly equipped with unique methods and functions to meet the needs of design and development sites *For more details, please refer to the PDF document or feel free to contact us.*

• Scientific Calculation and Simulation Software
• Analysis and prediction system

We would like to introduce a case where Honda R&D used 'modeFRONTIER' for the development of technology for pedestrian protection. In actual accidents, pedestrians collide with vehicles "with their entire body." To accurately understand the mechanism of accidents, the full-body model of a pedestrian, "POLAR," was absolutely necessary. In performance verification, a parameter study was conducted to repeatedly calculate until the performance requirements were met, which took a significant amount of time. Therefore, we established a method using the response surface of 'modeFRONTIER' to derive optimal solutions in a short time. 【Features of modeFRONTIER】 ■ A new optimization tool that supports "thinking" ■ Richly equipped with unique methods and functions to meet the needs of design and development sites ■ High support from many users ■ Construction of a distributed execution environment using multiple machines, without using general NQS *For more details, please refer to the PDF document or feel free to contact us.

• Scientific Calculation and Simulation Software
• Analysis and prediction system

We would like to introduce a case where Azbil Corporation utilized 'modeFRONTIER' for the application study of a multi-purpose optimization method for air conditioning control in commercial buildings. The objective was to determine the set values for air conditioning equipment that enable airflow control to enhance comfort and energy efficiency in "task ambient air conditioning." By verifying the results of the optimization algorithm, we will consider whether it can be applied to air conditioning control in the future. By utilizing the parallel computing capabilities of 'modeFRONTIER' and OpenFOAM, there is potential for real-time air conditioning control if the number of computers is increased. However, it was also found that an increase in the number of computers for calculations could hinder energy savings. 【Features of modeFRONTIER】 ■ A new optimization tool that supports "thinking" ■ Richly equipped with unique methods and functions to meet the needs of design and development sites ■ High support from many users ■ Construction of a distributed execution environment using multiple machines without the need for general NQS *For more details, please refer to the PDF materials or feel free to contact us.

• Scientific Calculation and Simulation Software
• Analysis and prediction system

We would like to introduce a case where Hirotech utilized "GT-POWER," "modeFRONTIER," and others in the development of automotive exhaust system products. Back pressure and exhaust sound are in a trade-off relationship, and to achieve a high level of balance between these two, we are conducting studies using optimization technology. To improve analysis accuracy, it is necessary to model and analyze the internal structure in detail; however, in that case, even with 1D "GT-POWER," it takes about 20 minutes of computation time per design. Previously, we needed to be careful to avoid calculation errors because we were coupling "GT-POWER" and "modeFRONTIER" via batch files, but since the "GT-POWER Direct Interface" was incorporated into "modeFRONTIER," input has become much easier. 【Features of modeFRONTIER】 ■ A new optimization tool that supports "thinking" ■ Richly equipped with unique methods and functions to meet the needs of design and development sites ■ Highly supported by many users *For more details, please refer to the PDF materials or feel free to contact us.

• Scientific Calculation and Simulation Software
• Analysis and prediction system

We would like to introduce a case where Shimadzu Corporation utilized 'modeFRONTIER' for the performance optimization study of aircraft air conditioning systems. The company focused on identifying improvement points in the design process and applying them to actual work processes, reviewing the workflow related to air conditioning equipment and tackling the mission of enhancing the air conditioning capacity of large aircraft. While the initial setup of the optimization calculation workflow using 'modeFRONTIER' was challenging, the technical support team provided attentive assistance, from usage guidance to know-how, allowing for a smooth establishment of the optimization operations. **Features of modeFRONTIER** - A new optimization tool that supports "thinking" - Rich in unique methods and functions to meet the needs of design and development sites - Highly supported by many users - The construction of a distributed execution environment using multiple machines can be set up without using general NQS. *For more details, please refer to the PDF materials or feel free to contact us.*

• Scientific Calculation and Simulation Software
• Analysis and prediction system

We would like to introduce a case where IHI utilized 'modeFRONTIER' and 'STAR-CCM+/STAR-CD' for product design optimization and automation. The company learned about 'modeFRONTIER' during a re-investigation to review their tools. Compared to other tools, what they liked most about 'modeFRONTIER' was its "ease of use" and "rich result processing capabilities." In result processing, multidimensional analysis charts, spatial distributions, and scatter plot matrices are very easy to read, which helps in result analysis, such as finding solutions with minimal impact from manufacturing errors and environmental variations. 'modeFRONTIER' is an intuitively easy-to-use tool. Additionally, it has a rich direct interface, making it suitable for environments using various types of CAD. **Features of modeFRONTIER** - A new optimization tool that supports "thinking" - Equipped with unique methods and functions to meet the needs of design and development sites - Highly supported by many users *For more details, please refer to the PDF document or feel free to contact us.*

• Scientific Calculation and Simulation Software
• Analysis and prediction system

We would like to introduce a case where Fujitsu Laboratories utilized 'modeFRONTIER' in their efforts to improve productivity in the manufacturing field. With the advancement of personal computers and analytical devices, it has become possible to acquire vast amounts of information, and we believe that organizing this information in a clear manner is an essential technology for supporting manufacturing. 'modeFRONTIER' offers a wealth of post-processing functions, and it has achieved results in visualizing analysis results using its multivariate analysis tools. [Features of modeFRONTIER] ■ A new optimization tool that supports "thinking" ■ Richly equipped with unique methods and functions to meet the needs of design and development sites ■ High support from many users ■ Construction of a distributed execution environment using multiple machines without using general NQS *For more details, please refer to the PDF document or feel free to contact us.

• Scientific Calculation and Simulation Software
• Analysis and prediction system

We would like to introduce a case where Mitsubishi Motors Corporation utilized "GT-SUITE" and "modeFRONTIER" in the development of SUVs and PHEVs. One of the common applications of "modeFRONTIER" by the company is tuning calculations in "GT-SUITE." While reasonable accuracy can be achieved in steady-state calculations, the increase in parameters for unsteady calculations makes it difficult to secure the expected accuracy. Therefore, adjustments to parameters are made in conjunction with "modeFRONTIER." Particularly in air conditioning calculations, since each calculation takes a considerable amount of time, efficient calculations are performed using weekends, including nights. While primarily dealing with thermal capacity parameters, even data that is difficult to obtain is parameterized. 【Features of modeFRONTIER】 ■ A new optimization tool that supports "thinking" ■ Rich in unique methods and functions to meet the needs of design and development sites ■ Highly supported by many users ■ Construction of a distributed execution environment using multiple machines, without using general NQS *For more details, please refer to the PDF materials or feel free to contact us.

• Scientific Calculation and Simulation Software
• Analysis and prediction system

We would like to introduce a case where Taisei Corporation utilized 'modeFRONTIER' for optimizing a daylighting device that delivers sunlight deep into the room. By guiding daylight to the ceiling surface of the room while technically cutting the light that enters the human eye, we analyzed the shape of the daylighting device using the lighting optical evaluation software "Lighting Simulator CAD," ultimately arriving at a shape for which a patent is currently being applied. After completing these tasks, a question remained regarding whether the shape considered by humans was suitable or not, and whether we would need to repeat the trial and error of drawing and analysis for new shape considerations in the future. By utilizing 'modeFRONTIER' and "Lighting Simulator," we were able to confirm the validity of the human-drawn shape with similar shapes. [Features of modeFRONTIER] ■ A new optimization tool that supports "thinking" ■ Richly equipped with unique methods and functions to meet the needs of design and development sites ■ Construction of a distributed execution environment using multiple machines without using general NQS *For more details, please refer to the PDF materials or feel free to contact us.

• Scientific Calculation and Simulation Software
• Analysis and prediction system

We would like to introduce a case where Nidec Corporation utilized 'modeFRONTIER' to improve the performance of brushless DC motors and fan motors. The company custom designs according to each customer's requirements, so there are often opportunities to design magnetic components, including magnetizers and jigs, from scratch. Therefore, 'modeFRONTIER' is used to derive Pareto solutions from all shape parameters. Before its introduction, they validated one parameter at a time, taking over a week to finalize the shape, but now they can identify a target in about a day. They can also quickly grasp the contribution of all parameters, including interactions, comprehensively, allowing for much faster design progress in subsequent similar cases. **Features of modeFRONTIER** - A new optimization tool that supports "thinking" - Rich in unique methods and functions to meet the needs of design and development sites - Enables the construction of a distributed execution environment using multiple machines without relying on general NQS *For more details, please refer to the PDF document or feel free to contact us.*

• Scientific Calculation and Simulation Software
• Analysis and prediction system

We would like to introduce a case where Kitakyushu City University utilized "FloTHERM," "FloTHERM XT," and "modeFRONTIER" for research on LED heat dissipation through industry-academia collaboration. It is often said that when the temperature of an LED decreases by 10°C, its lifespan can double, indicating a close relationship between heat dissipation performance and the lifespan of LED lighting. Therefore, we evaluated the lifespan of LEDs considering the operating conditions of the floodlights and conducted optimization that took both lifespan and the cost of the lighting equipment into account. By integrating "FloTHERM" and "modeFRONTIER," we established an automated and optimized environment using CAE, allowing us to obtain trade-off information between lifespan and cost through parameter studies. 【Features of modeFRONTIER】 ■ A new optimization tool that supports "thinking" ■ Rich in unique methods and functions to meet the needs of design and development sites ■ Highly supported by many users ■ Capable of building a distributed execution environment using multiple machines without relying on general NQS *For more details, please refer to the PDF document or feel free to contact us.

• Scientific Calculation and Simulation Software
• Analysis and prediction system

We would like to introduce a case where Honda R&D utilized 'modeFRONTIER' for the development of a general-purpose engine. In the link design of the multi-link high expansion ratio engine "EXlink," there were challenges related to noise and vibration at that time. Additionally, a colleague at that time was facing the challenge of balancing cooling performance and noise in a centrifugal fan. By combining the multi-purpose optimization capabilities of 'modeFRONTIER' with the automatic measurement functionality of LabVIEW, we enhanced the freedom and scalability of measurements, as well as the multi-purpose optimization features. 【Features of modeFRONTIER】 ■ A new optimization tool that supports "thinking" ■ Rich in unique methods and functions to meet the needs of design and development sites ■ Highly supported by many users ■ The construction of a distributed execution environment using multiple machines can be done without using a typical NQS *For more details, please refer to the PDF document or feel free to contact us.

• Scientific Calculation and Simulation Software
• Analysis and prediction system

We would like to introduce a case where Sumitomo Heavy Industries utilized 'modeFRONTIER' for the shape optimization of steam turbine blades. Although they had previously implemented another optimization tool, there were situations where it was not fully utilized in actual product design. With the introduction of 'modeFRONTIER', it became easier to analyze why a certain shape is good and how it can be improved. As a result, efficient exploration became possible without the need for repeated trial and error, which is one of the achievements. 【Features of modeFRONTIER】 ■ A new optimization tool that supports "thinking" ■ Rich in unique methods and functions to meet the needs of design and development sites ■ Highly supported by many users ■ Construction of a distributed execution environment using multiple machines can be done without using general NQS *For more details, please refer to the PDF document or feel free to contact us.

• Scientific Calculation and Simulation Software
• Analysis and prediction system

We would like to introduce a case where DENSO utilized "STAR-CCM+/STAR-CD" and "modeFRONTIER" for performance design related to automotive air conditioning, including HVAC. The company is also working on optimizing duct shapes using "modeFRONTIER." Previously, it took 1 to 2 weeks to derive optimal shapes relying on experience and intuition, but by utilizing "modeFRONTIER," they were able to find optimal shapes in 2 to 3 days. 【Features of modeFRONTIER】 ■ A new optimization tool that supports "thinking" ■ Equipped with unique methods and functions to meet the needs of design and development sites ■ Highly supported by many users ■ Distributed execution environment construction using multiple machines can be built without using general NQS *For more details, please refer to the PDF document or feel free to contact us.

• Scientific Calculation and Simulation Software
• Analysis and prediction system

We would like to introduce a case where DENSO utilized "FloTHERM/FloTHERM PCB" and "modeFRONTIER" to solve thermal issues related to engine ECUs. Considering factors such as wiring patterns and EMC, it is impossible to manually arrange hundreds of components. As for the computational method after introducing "modeFRONTIER," in the initial stage, we do not focus on detailed models but instead select components that have a significant impact on the overall system and boldly eliminate parts that can be omitted. We conduct approximately 800 optimization calculations, aiming for about 10 minutes of computation per case. From the suitable solution candidates obtained, we further improve accuracy. 【Features of modeFRONTIER】 ■ A new optimization tool that supports "thinking" ■ Rich in unique methods and functions to meet the needs of design and development sites ■ Highly supported by many users ■ Construction of a distributed execution environment using multiple machines without the use of general NQS *For more details, please refer to the PDF document or feel free to contact us.

• Scientific Calculation and Simulation Software
• Analysis and prediction system

We would like to introduce a case where Mitsubishi Chemical utilized 'modeFRONTIER' to address technical challenges in chemical development. It cannot be denied that in optimizing manufacturing conditions, we relied on past experiences and the intuition of skilled workers. However, it is also true that we felt limitations in that approach. By implementing 'modeFRONTIER', we were able to simulate experiences and intuition, achieving the ability to predict reasonably good results at an early stage. 【Features of modeFRONTIER】 ■ A new optimization tool that supports "thinking" ■ Rich in unique methods and functions to meet the needs of design and development sites ■ Highly supported by many users ■ Capable of building a distributed execution environment using multiple machines without relying on general NQS *For more details, please refer to the PDF document or feel free to contact us.

• Scientific Calculation and Simulation Software
• Analysis and prediction system

We would like to introduce a case where Mr. Mitsuba utilized 'modeFRONTIER' to enhance the efficiency of magnetic field analysis. Before the introduction of 'modeFRONTIER', parameter variations took 1 to 2 weeks, but now it can be done in about a day, significantly reducing the workload. Using 'modeFRONTIER', calculations involving tens of thousands to hundreds of thousands of combinations can yield Pareto solutions in about 24 hours. 【Features of modeFRONTIER】 ■ A new optimization tool that supports "thinking" ■ Equipped with unique methods and functions to meet the needs of design and development sites ■ Highly supported by many users ■ Capable of building a distributed execution environment using multiple machines without relying on general NQS *For more details, please refer to the PDF document or feel free to contact us.

• Scientific Calculation and Simulation Software
• Analysis and prediction system

We are currently distributing materials that outline key points to consider for efficiently advancing product development using "CAE." The materials introduce common post-implementation concerns in a conversational format, while clearly explaining the points to consider in order to solve these issues, making it easy for beginners to understand. [Contents] ■ Story at the time of implementation (during/after implementation) ■ Common post-implementation concerns ■ Examples of points for success ■ Introduction to ANSYS Discovery *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other Software

"Aras Innovator" is an enterprise MBD (Model Based Development) platform that is open, highly flexible, and scalable. We provide lifecycle management functions focused on business processes across the entire product lifecycle, including project management, design, quality, and production, as preset applications. This product can coexist with other PLM tools through integration interfaces. It is also easy to customize, and version upgrades are fully supported. This leads to improvements in the development process through the acceleration of PLM. [Features] ■ Coexistence with existing PLM tools is possible ■ Easy customization for adding, changing, or deleting functions ■ Flexible system modifications to align with your business workflows ■ Full guarantee of operation for version upgrades, including individually customized functions *For more details, please refer to the PDF materials or feel free to contact us.

• Other Software
• others

"VOLTA" is a web-based optimization enterprise solution developed by ESTECO, the creator of modeFRONTIER. It provides a web-based collaboration environment that integrates optimization and simulation processes and data. It allows for the construction of a system that enables sharing and reusing projects, computational resources, and optimization results, supporting a rapid product development framework. 【Features】 ■ Enables data sharing and execution of simulation and optimization projects among organizations of various sizes. ■ Access to CAD data on PDM/PLM, simulation data, modeFRONTIER project files, etc., from VOLTA. ■ Accessible anytime and anywhere from computers or mobile devices. *For more details, please refer to the PDF materials or feel free to contact us.

• Other Software
• others

"Ansys SCADE Architect" is a model creation environment that supports SysML, allowing system engineers to more easily design systems and architectures. Additionally, it provides a mechanism for seamless progression from architecture design to software design and display design using SCADE Suite or SCADE Display. This enables the construction of a consistent software development process from model-based systems engineering (MBSE). 【Features】 ■ Integration of design environments ■ Modeling with SysML ■ Verification of system design ■ Integration with SCADE LifeCycle report generation ■ Collaboration with other SysML tools ■ Customization of the SysML language, etc. *For more details, please refer to the PDF materials or feel free to contact us.

• Other Software
• others

"Ansys SCADE Suite" is a tool that supports the development of safety-critical embedded control software using model-based development methods. It utilizes a graphical language with strict semantics to achieve a consistent software development process, from "software design and verification (semantic checks, requirements-based testing, model test coverage analysis, formal verification, worst-case execution time analysis, stack size analysis) to automatic C code generation," all within a single tool environment. 【Features】 ■ An integrated development environment suitable for software development ■ A rich set of features in the editor environment ■ Certification-capable automatic C code generation for safety-critical industries ■ Support for multi-rate software ■ Support for multi-core and many-core ECUs, etc. *For more details, please refer to the PDF materials or feel free to contact us.

• Other Software
• others

"Ansys SCADE Display" is a tool environment that supports the design of display specifications and automatic code generation for embedded display systems. It supports the OpenGL SC/ES standards and provides a framework for new display development, including display specification design, prototyping, simulation, verification, and validation. It enables validation work at the display specification level, eliminating errors that may occur during specification design and coding. As a result, it significantly contributes to reducing time to market. 【Features】 ■ Advanced prototyping and display specification design ■ Management functions for plugs (variables) ■ Verification and validation at the model level ■ Certifiable automatic C code generation ■ Provision of ARINC 661 solutions, etc. *For more details, please refer to the PDF materials or feel free to contact us.

• Other Software
• others

"SCADE Test" is an environment for test engineers to independently test embedded control software models designed with SCADE Suite. By using the API for saving test scenarios (Test Services API), results executed on the target can be saved as test scenarios. This allows for the creation of test scenarios that are closer to actual conditions. This product efficiently automates the creation of test cases, execution of tests on a host PC or target, and management of test results. 【Features】 ■ Support for model validity verification with Rapid Prototyper ■ Model test coverage analysis ■ Execution and management of requirements-based testing on a host PC ■ Execution and management of requirements-based testing on a target ■ Test Service API, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other Software
• others

In application development using SCADE Architect, SCADE Suite, and SCADE Display, management related to the application lifecycle is necessary, including documentation of design, traceability management between requirements, design, implementation, and testing, as well as project progress and quality assessment. 'SCADE LifeCycle' supports these activities that are essential for projects requiring certification for customers using SCADE products. Through the ALM Gateway, it can integrate with requirements management tools and traceability management tools, and it has features such as automatic document generation and a template package to support certification planning. 【Features】 ■ Application Lifecycle Management (ALM) Gateway ■ Automatic document generation ■ Certification planning (for DO-178B/C) ■ Integration with configuration management tools, etc. *For more details, please refer to the PDF materials or feel free to contact us.

• Other Software
• others

Ansys SCADE not only complies with safety standards applied in various industries (ISO26262, DO-178C), but also offers "industry-specific packages" that cater to the standardization of specific industries. By using these packages, it becomes possible to design systems and develop embedded control software that meet safety standards and standardization. 【Product Lineup】 ■ Package for the automotive industry: AUTOSAR ■ Package for the aerospace industry: IMA, ARINC ■ Package for the defense industry: FACE *For more details, please refer to the PDF materials or feel free to contact us.

• Other Software
• others

"ANSYS medini analyze" is an integrated solution for analyzing the safety and reliability required by functional safety standards such as ISO26262, IEC61508, and ARP4754A, targeting electrical/electronic systems (E/E systems). By using a model-based approach that links safety analysis methods such as HAZOP, FTA, FMEA, and FMEDA to the system architecture model, it enables efficient safety and reliability analysis. Additionally, by integrating information on a single tool, it is possible to easily ensure consistency and traceability between design information and safety analysis results. [Features] ■ Collaboration between design information and safety analysis through a model-based approach ■ Utilization of assets through tool integration *For more details, please refer to the PDF document or feel free to contact us.

• Other Software
• others

"iconCFD" is a program developed based on OpenFOAM(R). It has the capability for automatic generation of analysis models, exhibits high convergence, and fixes known bugs in OpenFOAM. Additionally, improvements have been made with consideration for ease of use as a tool. OpenFOAM is a collection of computational codes for physical fields that is trademarked by OpenCFD, a subsidiary of ESI Group. It is released as open-source code under the GPL license, written in C++. Its functionalities range widely from mesh creation to solvers for fluid dynamics, heat transfer, molecular dynamics, electromagnetics, and solid stress analysis, as well as result processing and visualization. CAE simulations can be realized through code development that matches user needs in design processes, physical models, required accuracy, and automation processes. 【Features】 ■ Achieves large-scale calculations at low cost ■ Custom provision at the source level ■ High-precision analysis using LES ■ Rich functionality ■ Application-oriented development *For more details, please download the PDF or feel free to contact us.

• Scientific Calculation and Simulation Software

"Ansys EnSight" is a general-purpose post-processor that supports a wide range of scientific and engineering analysis results. In addition to standard result processing such as cross-sections and isosurfaces, it allows for easy display of walkthroughs and cross-section animations along streamlines, all through simple GUI operations. 【Features】 ■ High presentation impact with beautiful and advanced visualization capabilities ■ Unified post-processing for various solvers, including thermal fluid analysis and structural analysis ■ Result processing for fluid-structure interaction analysis ■ Parallel high-speed processing of large-scale data ■ Automation support with command auto-recording and playback editing features *For more details, please download the PDF or feel free to contact us.

• Scientific Calculation and Simulation Software

"CADfix" is a tool that performs bug fixes and quality improvements to ensure that CAD data can be reliably imported into other CAD/CAE software. It features excellent operability, a simplified and efficient correction process that is easy to understand, and significantly reduces the time required for shape modifications. Additionally, it comes standard with a shape simplification function that allows for the search and deletion of unnecessary shapes for CAE as needed, enabling the conversion of shapes created in design into shapes optimized for CAE. This frees engineers from the overhead and preparation time required for data utilization. 【Features】 ■ Three efficient correction modes tailored to the problem (fully automated correction processing, interactive correction processing, batch processing) ■ User-friendly interface ■ Diagnostic functions in accordance with PDQ guidelines ■ Functions to promote the use of CAD shapes in CAE ■ Section extraction functions for fluids and more *For more details, please download the PDF or feel free to contact us.

• Scientific Calculation and Simulation Software

DEP Mesh Works is a high-end mesh morphing program developed by Detroit Engineered Products Inc. in the United States. Morphing is a technique that utilizes existing mesh models to change the shape without altering the CAD geometry, by only modifying the nodes or element shapes. This minimizes the need to revert to CAD, significantly reducing the man-hours required in the CAE model preparation process. In addition to morphing capabilities, it offers various features to support modeling for CAE, such as inserting features into mesh data, stitching functions, and shape-wrapping mesh capabilities. The parametric functionality allows for the setting of multiple morphing sets, and batch processing capabilities enable integration with optimization tools. DEP Mesh Works is adopted by many automotive and parts manufacturers, as well as aerospace manufacturers, including automotive companies worldwide, such as those in the United States, Japan, and South Korea.

• Scientific Calculation and Simulation Software
• Other Software

『modeFRONTIER』 is a general-purpose designer support tool developed by the Italian optimization technology specialist ESTECO s.r.l. It supports multi-objective optimization and has continued to incorporate our methods, algorithms, and result processing functions since its launch in 2001, primarily in collaboration with various universities. In addition to merely outputting optimal solutions, it has newly integrated the CAP function to assist designers in understanding why a solution is optimal, evolving further as a decision support tool. 【Features】 ■ Equipped with advanced optimization methods, experimental design methods, and response surface approximation methods ■ Supports multi-objective robust design optimization and multi-objective tolerance design optimization ■ Includes a variety of post-processing functions such as statistical analysis, multivariate analysis, and CAP ■ Interface compatible with Japanese (Windows) and English environments ■ Standardly equipped with dedicated nodes for direct access to various tools (such as CATIA V5, ANSYS Workbench, MATLAB, LabVIEW, etc.) *For more details, please download the PDF or feel free to contact us.

• Scientific Calculation and Simulation Software
• Other Software

In nonlinear structural analysis, the three key nonlinearities are material, geometry, and boundary conditions. In recent design practices, there is a necessity to consider contact in assembly components using complex material models. Abaqus can accurately model not only classical metal material constitutive laws but also failure models due to rate dependence and polymers such as rubber and resin. Additionally, the innovative formulation of surface-to-surface contact achieves more robust convergence and higher analysis accuracy compared to other structural analysis tools. The general contact feature requires minimal user setup, significantly reducing the time needed to define contacts in complex assemblies seen in automobiles, aircraft, consumer electronics, and portable electronic devices.

• Rock drills, demolition machines, and excavators
• Scientific Calculation and Simulation Software

"MpCCI (Mesh-based parallel Code Coupling Interface)" is an interface for coupled analysis developed by the German company scapos AG. This product enables the coupling of different CAE analysis software, such as fluid analysis software and structural analysis software, allowing for data exchange and facilitating weakly coupled analysis. It can simulate multi-physics phenomena such as fluid-structure coupling and fluid-electromagnetic field coupling. 【Features】 ■ Adaptable to various coupled analyses - Multi-physics ■ Interface with various CAE software ■ Excellent data mapping capabilities ■ Strong support for mesh movement problems ■ User-friendly GUI ■ High extensibility that can be customized according to the analysis content *For more details, please refer to the PDF materials or feel free to contact us.

• Scientific Calculation and Simulation Software

CATIA V5 is a high-end 3D CAD program developed by Dassault Systèmes and released in 1981, which can be considered a representative of its kind. It has been widely used in the automotive and aerospace industries for many years, and is also extensively utilized in industries such as industrial machinery, electronics, shipbuilding, plant design, and consumer goods. The development of CAE technologies based on the CATIA platform allows for performance design that takes product performance into account, moving beyond simple design tasks. In particular, when handling assemblies, the performance of the solid kernel, which enables advanced geometric data handling (including libraries for surface data, topological data, and editing history management necessary for modeling), is extremely high. This capability not only facilitates the handling of complex surface shapes and assemblies with numerous parts, but also significantly reduces the effort required for simpler operations, such as generating interpolation surfaces between surfaces and creating fillet surfaces for surfaces that contact at points. *For more details, please refer to the PDF materials or feel free to contact us.*

• Scientific Calculation and Simulation Software

At IDAJ Corporation, we propose the "systematization of simulations" to support companies in strengthening their competitiveness, streamlining product development, and reducing costs. We offer a wide range of solutions, from dedicated systems specialized for specific products to multipurpose systems. We support all platforms, including UNIX, Linux, and Windows. We utilize appropriate development environments such as Java, VC++, C, and Fortran. Combining this with "CAE consulting" makes it even more effective. 【Features】 ■ Realization of sharing and reuse of CAE utilization technology ■ Achievement of accelerated product development using CAE ■ Improvement in quality and performance through an increase in virtual experiments ■ Enhancement of competitiveness through the promotion of front-loading *For more details, please refer to the PDF materials or feel free to contact us.

• Architectural CAD
• Scientific Calculation and Simulation Software
• Other Software

EASA (Enterprise Accessible Software Applications) is a framework developed for building processes aimed at integrating software applications scattered within a company and improving the usability of cumbersome in-house code. By allowing customers to build original applications in a timely manner, it enables the execution environment for CAE processes by designers. 【Features】 - Achieves a seamless web environment for software and databases - Easy GUI construction through an application builder - Centralized management of data, users, and applications - Standard library that supports multiple languages *For more details, please download the PDF or feel free to contact us.

• Other Software

We are currently offering a collection of case studies utilizing the general-purpose optimization support tool "modeFRONTIER"! 【Contents of the Case Study Collection】 ■ Mitsuba Corporation Utilized optimization support tools to improve the efficiency of magnetic field analysis ■ Mitsubishi Chemical Corporation Utilized optimization support tools to address technical challenges in chemical development ■ Honda R&D Co., Ltd. Utilized optimization support tools in the development and design of motorcycles ■ Denso Corporation Solved thermal issues for engine ECUs *For more details, please request the materials or view the PDF data from the download.

• Scientific Calculation and Simulation Software

We are currently offering a collection of case studies utilizing the thermal design support tool "FloTHERMR" for electronic devices! 【Contents of the Case Study Collection】 ■ DENSO Utilized "FloTHERM, FloTHERM PCB," and "modeFRONTIER" to solve thermal issues for engine ECUs. ■ Lenovo Japan Thoroughly utilized FloTHERM simulations from the early stages of development. *For more details, please request the materials or view the PDF data from the download section.

• Scientific Calculation and Simulation Software

We are currently offering a collection of case studies utilizing the critical system software integration development environment "SCADE"! SCADE is a product suite developed by Esterel Technologies that enables the construction of a consistent process from system design for safety-critical systems to embedded software development, embedded display development, and application lifecycle management. 【Contents of the Case Study Collection】 ■ Kyosan Manufacturing Co., Ltd. Started applying SCADE to improve software quality. *For more details, please request the materials or view the PDF data from the download section.

• Scientific Calculation and Simulation Software

Around us, various physical phenomena such as fluids, structures, electromagnetic fields, and acoustics are intricately intertwined to form a "multiphysics" environment. To accurately capture these phenomena in CAE, it is necessary to model them while considering multiphysics. In this context, the functionality and performance of software and hardware continue to improve rapidly, establishing a foundation for coupled analysis that takes multiple physical phenomena into account. Due to demands for cost reduction in product development and shorter development cycles, the need for improved accuracy and practical application of CAE is increasing daily. Therefore, at IDAJ, we provide a comprehensive support for multiphysics CAE by simultaneously proposing Abaqus and the general-purpose thermal fluid analysis program STAR-CCM+. By combining Abaqus and STAR-CCM+ for coupled analysis, we achieve more realistic and accurate analyses.

• Scientific Calculation and Simulation Software
• Other Software