Reinforcement method Product List and Ranking from 43 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.

Reinforcement method Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.

  1. コンステック Osaka//General contractors and subcontractors
  2. 横山基礎工事 Hyogo//General contractors and subcontractors
  3. ESP Hiroshima//Other construction industries
  4. 4 日鉄ケミカル＆マテリアル コンポジット事業部 Tokyo//Building materials, supplies and fixtures manufacturers
  5. 5 ケー・エフ・シー Osaka//Building materials, supplies and fixtures manufacturers
Go to Company Ranking

Reinforcement method Product ranking

Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.

  1. Reinforcement of existing beam after hole cutting: "Redouble Method" コンステック
  2. Temporary bridge temporary pier cable-stayed construction method "LIBRA Method" 横山基礎工事
  3. Construction Method Comparison Table ESP
  4. 4 Pole Repair and Reinforcement Method: YCK Method 'Carbon Fiber' ヨシモトポール
  5. 5 Shear Reinforcement Method "RMA Method" ケー・エフ・シー

Reinforcement method Product List

301～315 item / All 372 items

Displayed results
Foundation Reinforcement Method: Stubborn Old Man

Foundation Reinforcement Method: Stubborn Old Man

Seven strong layers protect the foundation of your home! Even unreinforced foundations can be strengthened to 2 to 4 times their conventional strength.

If you leave cracks and fissures in the foundation unattended, the foundation will not be able to bear the load of the building during an earthquake. "Ganko Oyaji" is a subsidence correction method that achieves high-strength reinforcement exceeding that of new construction with seven robust layers, including carbon fiber. It can reinforce even unreinforced foundations to 2 to 4 times stronger than conventional methods. It possesses features such as high strength, high durability, shear strength, improved toughness, short construction periods, and low cost. 【Features】 ■ High strength, high durability, shear strength, improved toughness, short construction periods, low cost ■ Can reinforce even unreinforced foundations to 2 to 4 times stronger than conventional methods ■ Results of full-scale strength performance tests - Achieves 10 times the strength of steel plates and 1.5 times the strength of aramid fibers ■ Seven robust layers protect the foundation of your home *For more details, please refer to the PDF materials or feel free to contact us.

  • Ground improvement
  • Residential foundations
  • Earthquake-resistant construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Transparent resin tile fixing and detachment prevention method "JK Cerider Method"

Transparent resin tile fixing and detachment prevention method "JK Cerider Method"

Up to 10 years warranty! A tile falling prevention method that reinforces tiled exterior walls on a surface level!

The "JK Serider Method" is a tile fall prevention technique that reinforces tiled exterior walls using a special acrylic resin called "JK Serider," which becomes transparent after curing and is mixed with short fibers, along with special anchor pins. This method not only excels in seismic resistance but also offers excellent waterproofing, and its transparent finish ensures that the texture of the exterior wall is not compromised, making it a groundbreaking technique. Additionally, it protects the exterior wall from rainwater with long-lasting waterproofing. It also blocks carbon dioxide in the atmosphere, contributing to the longevity of the building. 【Features】 ■ Outstanding seismic resistance ■ Warranty of up to 10 years ■ High performance of special anchor pins ■ Reinforcement of joint materials ■ Excellent waterproofing and blocking properties *Available in Tokyo, Saitama, Chiba, and Kanagawa Prefectures *For more details, please refer to the PDF document or feel free to contact us.

  • Renovation and repair methods

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Concrete repair and reinforcement method "CFRP Laminate Method"

Concrete repair and reinforcement method "CFRP Laminate Method"

Streamlining of work is achievable! Repair and reinforcement methods for reinforced concrete structures using CFRP.

The "CFRP Laminate Method" is a reinforcement technique that involves arranging carbon fibers in one direction, impregnating them with epoxy resin, and shaping and curing them into a plate-like form. This CFRP is then adhered to the concrete surface using a paste-like epoxy adhesive (Sika Dur 30), making the process simple. Since the surface preparation is only required for the area to be adhered, it also takes into account the preservation of the working environment and the reduction of waste. 【Features】 - Easy to work with, requiring no large machinery or equipment - Can be performed in areas where pipes intersect beneath the slab or in confined spaces - Reduces safety risks for workers and minimizes protective measures around the work area - There is almost no change in the shape or weight of the reinforced members - Provides reinforcement equivalent to 4 to 8 layers of carbon fiber sheets, allowing for labor-saving in the work process *Available in Tokyo, Saitama, Chiba, and Kanagawa Prefectures *For more details, please refer to the PDF materials or feel free to contact us.

  • Reinforcement and repair materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Data] Seismic retrofitting construction achievements

[Data] Seismic retrofitting construction achievements

Achieving seismic resistance for various types of sewer pipes! Introducing case studies of NS cutting method and remaking lining.

This document introduces the construction achievements of the "NS Cutting Method" and "Remaking Ring" handled by the NS-R Method Association. It includes 69 achievements related to the cutting technology "NS Cutting Method" for installing seismic flexible joints and the non-excavation rehabilitation pipe and manhole connection seismic reinforcement method "Remaking Ring." Please feel free to download and take a look. [Contents] ■ Test construction in Koganei City ■ Seismic joint installation work ■ Sewage disaster recovery work (23 Disaster No. 55-2) ■ External sewage long-life measures work at 83 Komoncho (Section 2) ■ External sewage long-life measures work at 1-1 Myojincho (Seismic joint installation work) *For more details, please refer to the PDF document or feel free to contact us.

  • Earthquake-resistant construction method
  • Sewerage facilities

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sto Dry Spray Application Seismic Reinforcement Method

Sto Dry Spray Application Seismic Reinforcement Method

Introducing a new method for concrete repair and reinforcement!

The "Sto Dry Spray Seismic Reinforcement Method" is a technique developed by Sto, a company established in the Black Forest region of Germany that specializes in the development and sale of construction materials. This seismic reinforcement method involves reinforcing existing concrete structures with rebar and using a dry spray application technique, allowing for thin-layer PCM thickening to address structural dimensional issues such as riverbed obstruction and building limits. In collaboration with Fukuyama University, we are conducting experimental demonstrations of the seismic reinforcement effects. 【Features】 ■ Significant increase in construction speed due to mechanized construction and long-distance pumping ■ Labor-saving through mechanized construction, leading to reductions in temporary costs due to shortened construction periods ■ Adoption of the excellent workability of the dry spray application method ■ Superior strength characteristics such as adhesion strength ■ High durability against carbonation and salt damage *For more details, please download the PDF or feel free to contact us.

  • Renovation and repair methods
  • Earthquake-resistant construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Soil retaining member pull-out simultaneous filling method

Soil retaining member pull-out simultaneous filling method

- Proximity construction - reliable settlement control - Soil contamination measures - water barrier even after extraction - Embankment construction - no creation of waterways

When performing earth retention using temporary materials in areas close to important structures such as residential buildings and underground installations, significant impacts on the surrounding ground can occur during the extraction of earth retention piles (such as steel sheet piles or H-piles), often leading to business losses such as building compensation. Without an effective solution, there was no choice but to leave the earth retention piles in place, causing difficulties for many stakeholders. This method simultaneously fills the void created during extraction by pulling from pre-installed filling pipes. Under conditions with a variety of ground conditions and differences in extraction machinery, it highly suppresses ground displacement after extraction, allowing for the safe retrieval of earth retention materials. In recent years, due to frequent major disasters caused by heavy rainfall, this method has seen an increase in usage as a unique solution for earth retention work on river and pond embankments that does not create water channels. It contributes to cost reduction in proximity construction, prevention of business losses, and reduction of environmental impact through the reuse of steel sheet piles. This method can also be applied underwater. *For more details, please download the catalog PDF or feel free to contact us.*

  • Ground foundation construction method
  • Special Construction Method
  • Civil Engineering Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Since adjacent construction is possible, it prevents business losses: "Simultaneous Filling Method for Retaining Material Pullout."

Since adjacent construction is possible, it prevents business losses: "Simultaneous Filling Method for Retaining Material Pullout."

No underground obstacles will be left behind due to abandonment (entombment)! The 'GEOTETS method' is effective in such areas.

■Close Proximity Construction [Preventing Business Loss] In areas close to important structures such as residential houses, there seems to be a lot of residual soil retaining materials. This method allows for simultaneous filling while pulling out the material through pre-installed filling pipes, addressing the voids created by the extraction. It highly suppresses ground displacement, enabling safe extraction of the soil retaining materials. ■Reservoirs and River Embankments [No Water Path Creation] In recent years, due to frequent major disasters caused by heavy rain, there has been an increase in the use of construction methods that do not create water paths in soil retaining works for river and reservoir embankments. This method can also be applied underwater. ■Soil Contamination Countermeasures [Waterproof Wall Even After Soil Retaining Material Removal] In soil contamination countermeasure works, groundwater monitoring is required for two years after the completion of the project. Therefore, it is not possible to pull out the soil retaining materials. By adopting this method, which has the function of a waterproof wall, it is possible to remove the soil retaining materials early and reduce costs. ■Pile Extraction [High-Speed Simultaneous Filling to Suppress Settlement] Initially, filling was done at a rate of 20 to 30 liters per minute. Now, it has advanced to allow for high-speed simultaneous filling of up to 140 liters in large volumes. This development achievement has made it possible to use this method for extracting large cross-section existing piles as well.

  • Ground foundation construction method
  • Civil Engineering Method
  • Earth retaining wall/foundation reinforcement

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"RB Frame" auxiliary mesh for simple formwork for slope materials

"RB Frame" auxiliary mesh for simple formwork for slope materials

A high-quality frame that contributes to the site, taking into account the workability on steep slopes, mortar spraying loss, and the quality of the finish during spraying!

The construction material "RB Frame" for simple formwork makes it easier to work by installing an arch-shaped wire mesh that serves as a guideline for the thickness of the spray application. 【Features】 ■ Reduces mortar loss during spraying ■ Provides a guideline wire mesh for a clean application *For more details, please refer to the PDF or contact us.

  • Slope protection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High versatility corrosion protection and reinforcement method 'SCFR Method'

High versatility corrosion protection and reinforcement method 'SCFR Method'

For the repair and reinforcement of steel pipe poles such as signposts and lighting poles!

The "SCFR method" is a repair technique aimed at preventing root rot in steel pipe columns, utilizing carbon fiber reinforced sheets (SCFR sheets) that also provide reinforcement effects. It is expected to have a repair effect lasting about 10 years. Additionally, by shaping the SCFR sheets into a "sudare" (bamboo blind) form, the workability on site is improved. Please feel free to contact us if you have any inquiries. 【Features】 ■ High adhesion ■ Increased strength ■ High versatility ■ Warning function *For more details, please download the PDF or feel free to contact us.

  • Renovation and repair methods

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Drainage and Water Supply Pipe Maintenance Device "ELCE"

Drainage and Water Supply Pipe Maintenance Device "ELCE"

Total management of water supply and drainage for buildings and apartments!

"ELCE" is a maintenance device for water supply and drainage pipes that eliminates the need for filter replacement and provides long-lasting effects. It resolves stubborn oil stains in drainage pipes and grease traps, contributing to reduced cleaning effort and prevention of unpleasant odors. It prevents scale buildup and removes rust inside water supply and drainage pipes, as well as preventing scale in cooling tower heat exchangers and packing materials, significantly reducing blowdown water. [Effects] - Maintenance and rehabilitation of water supply pipes / removal and prevention of red rust, scale, and slime - Maintenance and rehabilitation of drainage pipes / removal and prevention of red rust, scale, and slime - Humidity management / achieving humidity management in accordance with the revised Building Management Act - Toilet measures / removal and prevention of toilet uric scale and unpleasant odors *For more details, please download the PDF or contact us.

  • Sanitary fixtures
  • Drainage and ventilation equipment
  • Water Treatment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Gel coat surface coating material

Gel coat surface coating material

Improving the surface protection and decorative quality of FRP products!

Gelcoat is a surface coating material primarily composed of unsaturated polyester resin, developed to enhance the surface protection and decorative qualities of FRP products, as well as to strengthen various physical properties. 【Features】 ■ A lineup of products to meet diverse needs ■ Comprehensive support from knowledgeable and experienced salespeople and technicians *For more details, please contact us or download the PDF to view.

  • Medicines

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
We will carry out tunnel repair and reinforcement work, including investigation, proposal, management, and construction.

We will carry out tunnel repair and reinforcement work, including investigation, proposal, management, and construction.

It has been 20 years since we started repairing tunnels, bridges, and rivers. As a subcontractor, we have managed and executed many construction projects. First, we will provide an estimate.

We have conducted numerous management and construction projects to date. List of Tunnel Construction ● Interior Reinforcement Measures Various Continuous Fiber Sheets Reinforced Fiber Embedded Panels Copper Plates and Strips Rock Bolts Cross-Section Repair ● Back Void Measures Rigid Foam Polyurethane (12 to 40 times) Various Air Mortars ● Crack Measures Organic Materials (Injection of Epoxy, Acrylic, Polyurethane, etc.) Inorganic Materials (Injection of Ultra-Fine Particle Cement, Silicate, etc.) ● Water Leakage Measures Line and Surface Water Guidance Back Injection Drainage Boring System For other repair methods and inquiries, please contact us.

  • Tunnel construction
  • Bridge Construction
  • Renovation and repair methods

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Pipe Rehabilitation System: Thru-Lining Method

Pipe Rehabilitation System: Thru-Lining Method

Integrated rehabilitation of sewer pipes! We revive various pipelines in daily life without excavation.

The "Thru-Ring Method" is a technology for rehabilitating aging pipelines that are facing numerous issues without excavation. It can completely resolve problems associated with aging pipes (such as corrosion, cracks, infiltration of water, and intrusion of tree roots). By adjusting the thickness of the rehabilitated pipe, it can also accommodate standalone pipes and dual-layer structure pipes. Additionally, it is characterized by the ability to perform special constructions (such as large-diameter pipes, pressure pipes, curved and steep gradient piping, etc.). 【Features】 ■ It is a technology developed domestically, providing stable quality materials and construction. ■ It enables the restoration of functionality, improvement of service life, and reinforcement of aging pipes without excavation. ■ Structural design is carried out according to the purpose and conditions, allowing for the rehabilitation of aging pipes tailored to specific needs. ■ It can completely resolve the issues associated with aging pipes. ■ By adjusting the thickness of the rehabilitated pipe, it can accommodate standalone pipes and dual-layer structure pipes. *For more details, please refer to the PDF materials or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reinforcement of existing beam after hole cutting: "Redouble Method"

Reinforcement of existing beam after hole cutting: "Redouble Method"

Post-extraction opening reinforcement of beams using carbon fiber and cast steel plates - 'Redouble Method'

The "Ridabble Method" is a reinforcement technique that uses carbon fiber sheets, carbon fiber plates, and specialized anchoring hardware (cast steel plates) to shear-reinforce the cut-out sections of existing beams, allowing them to achieve a load-bearing capacity equal to or greater than that of the beams before the openings. This method has obtained general evaluation certification. Unlike traditional anchoring methods using L angles or flat bars for carbon fiber sheets, this method is compact and simple, yet ensures reliable anchoring of the carbon fiber sheets. There are two types of anchoring plates: flat type and vertical type, which can also be applied to reinforcement of wall-mounted columns and T-shaped beams. 【Features】 ■ A method that has obtained general evaluation certification for opening reinforcement General evaluation (Public Interest Incorporated Foundation) Better Living CBL RC001-10 ■ Suitable for opening reinforcement due to equipment renewal ■ Allows for pseudo-closed reinforcement through the use of anchoring hardware ■ Applicable to underground beams as well *For more details, please refer to the PDF materials or feel free to contact us.

  • リダブル工法イメージ_U型説明.jpg
  • リダブル工法イメージ_I型説明.jpg
  • リダブル工法イメージ_補強部材.jpg
  • リダブル工法イメージ_評定書表面0009.jpg
  • 1.jpeg
  • Paving Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Architectural and civil engineering vibration control damper "Taylor Fluid Viscous Damper"

Architectural and civil engineering vibration control damper "Taylor Fluid Viscous Damper"

Reliable quality cultivated in the aerospace field. We support uncompromising design with flexible customization.

Four Features ■ Customizability With a rich lineup and customizability, it can accommodate various designs. Damping Force: 200 to 8000 kN Speed: 200 cm/s* Stroke: Maximum ±1000 mm Speed Index: 0.3 to 1.0 (standard 0.4) Joint Type: 2 types *Products exceeding 200 cm/s can also be manufactured. ■ Wide Range of Vibration Response It exhibits damping effects against a wide range of vibrations, from small to large earthquakes. ■ Stable Performance Outdoors It has almost no temperature dependence and can usually be ignored. ■ Maintenance-Free By minimizing the number of moving parts and sealing the internal silicone fluid with patented sealing technology, there is no need for maintenance over time. *Please download the PDF for size and analysis specifications.

  • Earthquake-proof and vibration-damping equipment
  • Vibration isolation, vibration control, and earthquake resistance construction
  • Bridge Construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Reinforcement method

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.