Pile construction method - メーカー・企業33社の製品一覧とランキング

Ground reinforcement work for factories and warehouses | Pure Pile Method | Geotech

A high-strength ground reinforcement method that is not affected by soil type and corresponds to equipment weight.

In factories and warehouses, a strong and stable foundation is required to install and operate heavy equipment. In particular, ground subsidence caused by the vibration and weight of equipment can increase the risk of operational shutdowns and equipment damage. Therefore, regardless of the type of ground, it is important to ensure reliable bearing capacity through ground reinforcement. The Pure Pile method is a technique that solidifies cement milk into pile shapes underground, demonstrating high quality and strength without being affected by soil conditions, making it suitable for ground reinforcement that can support the weight of factory and warehouse equipment. 【Application Scenarios】 - Ground reinforcement in areas for heavy machinery installation - Ground reinforcement in areas for high-rise rack installation within warehouses - Ground strengthening in anticipation of future equipment expansion 【Benefits of Implementation】 - Increased productivity due to stable operation of equipment - Reduced risk of ground subsidence - Protection of long-term equipment investments

企業：ジオテック
価格：Other

Residential foundations
Renovation and repair methods
Other civil engineering works
Pile construction method

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[For Real Estate] Ground Reinforcement Work | Small-Diameter Steel Pipe Pile Method | Geotec Co., Ltd.

It is less affected by soil quality and water level, supporting buildings with low vibration and low noise.

In the real estate sector, the long-term safety of buildings and the maintenance of asset value are required. In particular, the condition of the ground is directly linked to the sinking or tilting of buildings and can significantly impact asset value. Inadequate ground measures carry the risk of future repair costs and decreased valuation at the time of sale. GeoTech Co., Ltd.'s small-diameter steel pipe pile method aims to firmly support buildings by ensuring that the steel pipe piles reach a reliable bearing layer, with the primary goal of preventing sinking. This enhances the stability of buildings and contributes to the maintenance and improvement of asset value. 【Application Scenarios】 - Ground reinforcement for newly built single-family homes - Sinking measures for existing buildings - Construction projects on soft ground 【Effects of Implementation】 - Reduction of risks related to building sinking and tilting - Assurance of long-term building safety - Contribution to the maintenance and enhancement of asset value

企業：ジオテック
価格：Other

Residential foundations
Renovation and repair methods
Other civil engineering works
Pile construction method

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Ground reinforcement work for factory stability in the manufacturing industry | Small-diameter steel pipe pile method

A support pile method that is less affected by soil quality and water level, providing low vibration and low noise to support factories.

In manufacturing factories, a strong and stable foundation is required to ensure the stable operation of production equipment and the long-term safety of buildings. In particular, vibrations caused by the installation and operation of large machinery, as well as fluctuations in groundwater levels, pose risks of ground subsidence and building tilt, which can lead to production line stoppages and damage to equipment. Our small-diameter steel pipe pile method addresses these challenges by ensuring that steel pipe piles reach a reliable support layer, thereby firmly supporting the building and facilitating stable factory operations. 【Application Scenarios】 - Ground improvement during new factory construction - Ground reinforcement during the expansion or renovation of existing factories - Prevention of subsidence in areas where large machinery is installed - Stabilization in sites with significant fluctuations in groundwater levels 【Benefits of Implementation】 - Increased productivity through stable operation of production equipment - Reduced risk of building subsidence and tilt - Assurance of long-term building safety - Construction with minimized impact on neighboring areas

企業：ジオテック
価格：Other

Residential foundations
Renovation and repair methods
Other civil engineering works
Pile construction method

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Ground reinforcement work for commercial facilities | Small-diameter steel pipe pile method | Geotech

A support pile method with low vibration and low noise that supports the safety of stores in commercial facilities.

In commercial facilities, a solid foundation is required to ensure the safety of stores and to allow customers to use them with peace of mind. In particular, building settlement can directly lead to dysfunction of the store and a decrease in customer satisfaction. Our small-diameter steel pipe pile method is a support pile method that is less affected by soil conditions and groundwater levels, providing stable quality to support buildings. This ensures the long-term safety of commercial facilities and contributes to the stability of store operations. 【Usage Scenarios】 - Ground improvement during new store construction - Ground reinforcement associated with renovations of existing stores - Settlement countermeasures for the entire commercial facility 【Benefits of Implementation】 - Improved store safety by reducing the risk of building settlement - Maintenance and enhancement of customer satisfaction - Stabilization of long-term store operations

企業：ジオテック
価格：Other

Residential foundations
Renovation and repair methods
Other civil engineering works
Pile construction method

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Ground reinforcement work | Low-noise ETP-G method ideal for construction in narrow sites and residential areas.

With compact construction equipment and low noise and vibration technology, we can smoothly handle narrow sites and densely populated residential areas! The ETP-G method achieves reliable advanced support strength.

In ground reinforcement work in residential areas and urban narrow sites, it is essential to control noise and vibration and to consider the safety of adjacent buildings. Geotech's ETP-G method is a rotary driven steel pipe pile method equipped with a disc-shaped enlarged wing and a triangular excavation auxiliary bit at the tip, achieving high-quality installation without burdening the surrounding environment even in confined spaces. Its greatest feature is the structural design that prevents wobbling during rotary penetration, allowing for smooth propulsion. Since it does not use cement milk, there is no dust or mud splatter, maintaining cleanliness on site. Furthermore, by using a compact and powerful dedicated construction machine, low-noise and low-vibration construction is possible even in environments with limited working space. The applicable range is broad, covering small buildings of three stories or less and under 13 meters in height, as well as retaining walls, with the ability to select the optimal specifications from various outer diameter and wing diameter sizes. Geotech has established a consistent safety management system, from preliminary site surveys to neighbor protection, torque management during construction, and quality checks, providing peace of mind to both local residents and clients.

企業：ジオテック
価格：Other

Ground improvement
Ground foundation construction method
Pile and foundation work
Pile construction method

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Ground reinforcement work | Trust in GBR-C performance certification and high-quality ETP-G method

Reliable technical expertise in obtaining GBRC performance certification! The ETP-G method protects buildings with rational calculations based on SWS testing and an ISO-compliant quality management system.

To ensure the long-term safety of buildings, the selection of objective and reliable ground reinforcement methods is essential. The ETP-G method provided by Geotech is a highly reliable rotary driven steel pipe pile method that has obtained the Building Technology Performance Certification (GBRC Performance Certification No. 09-19) from the General Incorporated Foundation Japan Building Disaster Prevention Association. This method allows for the calculation of allowable vertical bearing capacity using clear formulas based on standard ground survey results such as SWS tests and SRS tests, enabling evidence-based safe foundation design. Its unique structure, featuring a disc-shaped enlarged wing at the tip and an excavation auxiliary bit, simultaneously exhibits high penetration capability and tip bearing capacity, robustly supporting small-scale buildings with three stories or fewer and a total floor area of 1,500 square meters or less, as well as retaining walls. The non-displacement construction method that does not use cement eliminates the need for soil disposal, achieving reduced environmental impact through low noise and low vibration. Furthermore, our company provides a high-precision construction system that reliably prevents differential settlement by having the construction management technology department conduct internal controls in accordance with the ISO 9001-compliant quality management system, and by ensuring thorough on-site construction management and pre-start inspections and quality checks by qualified personnel.

企業：ジオテック
価格：Other

Ground improvement
Ground foundation construction method
Pile and foundation work
Pile construction method

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Ground reinforcement work | Visualizing construction quality through casting torque management with the ETP-G method.

Proving reliable support layer establishment with automatic monitoring of total installation torque! The ETP-G method boasts advanced quality control and traceability.

In ground reinforcement work, it is essential to prevent differential settlement risks in advance and to demonstrate the safety of structures through the visualization of construction data and reliable quality management. GeoTech's ETP-G method is a steel pipe pile method equipped with a disc-shaped enlarged wing and a triangular excavation auxiliary bit at the tip. Its structure prevents axial deviation during rotary insertion, allowing for smooth drilling and exhibiting high load-bearing capacity. The strength of this method lies in its real-time monitoring system through construction management devices. It automatically measures and saves the penetration torque, rotation speed, and depth values during installation, scientifically confirming the reach to the bearing layer. By employing a no-excavation method that does not use cement milk, it eliminates the risks of generating excavation residual soil and contaminating soil and groundwater. It can be applied to buildings with three stories or fewer and a total floor area of less than 1,500 square meters, allowing for optimal design from seven types of pile diameters and 45 types of wing diameter variations. Our company delivers assured safety and high quality to clients through strict traceability management in compliance with ISO 9001 quality management standards.

企業：ジオテック
価格：Other

Residential foundations
Renovation and repair methods
Other civil engineering works
Pile construction method

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Ground reinforcement work | Trust in GBR-C performance certification and high-quality ETP-G method

Reliable technical expertise in obtaining GBRC performance certification! The ETP-G method protects buildings through rational calculations based on SWS testing and an ISO-compliant quality management system.

Ensuring the long-term safety of buildings requires the selection of objective and highly reliable ground reinforcement methods. The ETP-G method provided by Geotech is a highly reliable rotary-driven steel pipe pile method that has obtained the Building Technology Performance Certification from the Japan Building Disaster Prevention Association (GBRC Performance Certification No. 09-19). This method allows for the calculation of allowable vertical bearing capacity using clear formulas based on standard ground investigation results such as SWS tests and SRS tests, enabling evidence-based safe foundation design. Its unique structure, featuring a disc-shaped enlarged wing at the tip and an excavation auxiliary bit, demonstrates high penetration capability and tip bearing capacity simultaneously, providing strong support for small-scale buildings with three stories or less and a total floor area of 1,500 square meters or less, as well as retaining walls. The use of a no-dirt-disposal construction method that does not require cement eliminates the need for soil disposal and reduces environmental impact through low noise and low vibration. Furthermore, under a quality management system compliant with ISO 9001, our construction management technical department conducts internal controls, and by ensuring on-site construction management by qualified personnel along with thorough pre-operation inspections and quality checks, we provide a high-precision construction system that reliably prevents differential settlement.

企業：ジオテック
価格：Other

Residential foundations
Renovation and repair methods
Other civil engineering works
Pile construction method

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Ground reinforcement work | Eliminate settlement risks in narrow sites with ETP method and data management.

The ETP method, utilizing a compact dedicated machine, is designed for construction in narrow spaces. It demonstrates reliable reach to the support layer and high safety through real-time tracking management of penetration data.

This document introduces the "ETP method," which addresses the challenges of "ground reinforcement work" in urban areas with limited access for heavy machinery and restricted workspaces, as well as the construction management system of Geotech. In densely populated urban areas with narrow site boundaries, there is a strong demand not only for reinforcement effects to prevent structural settlement accidents but also for the smooth delivery of construction machinery, reduction of impacts on neighboring properties, and assurance of underground construction reliability. The ETP method is a steel pipe pile method that features excellent penetration performance with a disc-shaped tip wing and excavation assist bit, allowing for powerful penetration and insertion using a compact dedicated construction machine compared to conventional methods. It enables smooth construction with low noise, low vibration, and no soil displacement even in narrow sites where large machinery cannot enter or in densely populated residential areas. With a wide range of pile diameters from φ89.1mm to φ609.6mm, it accommodates everything from single-family homes to large-scale buildings with a total floor area of 500,000 square meters. Geotech Co., Ltd. operates a management system that tracks and records the rotational torque and penetration depth in real-time during construction, ensuring reliable confirmation of reaching the support layer and stopping criteria based on objective data. We deliver assured quality and peace of mind while adhering to compliance.

企業：ジオテック
価格：Other

Ground improvement
Ground foundation construction method
Pile and foundation work
Pile construction method

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Ground reinforcement work | SMD method that reduces site costs with no soil disposal and low noise.

An environmentally friendly SMD method that achieves both the reduction of surplus soil disposal costs and the protection of the surrounding environment through construction without any generated soil and low-noise rotary penetration.

Ground reinforcement work is an essential construction process to prevent differential settlement and structural damage in soft ground, ensuring long-term durability. The SMD pile method developed by Geotech Co., Ltd. is a small-diameter rotary driven steel pipe pile method that achieves a high level of environmental consideration and cost reduction. The most significant feature of this method is its completely non-discharge construction through self-advancing rotary penetration. Since no construction-generated soil that becomes industrial waste is produced on-site, the disposal costs for surplus soil and the transportation costs for large vehicles from the site can be significantly reduced. The absence of cement milk eliminates the risk of cement scattering and groundwater contamination, and the work can be carried out with low noise and low vibration, greatly reducing noise complaints from neighboring residences. Furthermore, the use of compact construction machinery allows for smooth transportation and pouring even in narrow sites and densely populated residential areas. Under a nationwide construction network and a strict quality control system, we achieve high-quality ground reinforcement at low cost while reducing environmental impact.

企業：ジオテック
価格：Other

Ground improvement
Ground foundation construction method
Pile and foundation work
Pile construction method

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Ground reinforcement work | SMD method to optimize pile layout for mid-rise buildings and steel structures.

The SMD method optimizes pile layout with its enormous tip support strength due to a special inner and outer wing structure, significantly reducing foundation costs for mid-rise buildings and steel structures.

Ground reinforcement work is an essential process to eliminate the risk of settlement that buildings face and to ensure long-term safety from a structural foundation perspective. In particular, insufficient ground measures in mid-rise steel and reinforced concrete structures, as well as large constructions that require high ground bearing capacity, can lead to distortion of the structure and serious defects. The SMD pile method provided by Geotech Co., Ltd. is a small-diameter rotary penetration steel pipe pile method certified by the Minister of Land, Infrastructure, Transport and Tourism, featuring special outer and inner wings attached to the open-type steel pipe tip. During rotary penetration, the inner wings appropriately capture soil to suppress core deviation during excavation, and when the target depth is reached, the soil inside the pipe completely blocks it, demonstrating tremendous end bearing capacity. This excellent support performance allows for a reduction in the number of piles and a decrease in the shaft diameter compared to conventional precast concrete piles and large-diameter piles, significantly optimizing the overall layout plan of foundation work. Our company has established a consistent system from prior foundation design support to on-site construction and torque data management, proposing ground reinforcement that ensures structural safety and achieves substantial cost reductions.

企業：ジオテック
価格：Other

Ground improvement
Ground foundation construction method
Pile and foundation work
Pile construction method

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Ground reinforcement work | Visualizing construction data to ensure reliable quality with the SMD method.

The SMD method visualizes reliable construction quality through real-time torque and depth data tracking using construction management devices, along with a strict ISO quality management system.

Ground reinforcement work is extremely important for eliminating settlement risks in advance through quantitative ground evaluation and advanced site management, ensuring the structural safety of buildings. The SMD pile method provided by Geotech Co., Ltd. is a Minister of Land, Infrastructure, Transport and Tourism certified rotary driven steel pipe pile method that leverages visualization of construction and a rigorous quality management system. In this method, in addition to the high end-bearing capacity generated by the special inner and outer wings at the tip of the steel pipe, a construction management device is standardly operated during site construction. Data such as rotational torque, penetration depth, and turning speed are monitored and automatically recorded in real-time, allowing for scientific and objective stopping judgments through comparison with ground investigation data. This achieves uniform and extremely high construction quality across all piles, independent of individual operator experience. Furthermore, our company operates a unique quality management system compliant with ISO 9001, establishing complete traceability from material procurement to site management and the preparation of final reports. With reliable data backing, we fully support various ground guarantees, providing lasting peace of mind to our clients.

企業：ジオテック
価格：Other

Residential foundations
Renovation and repair methods
Other civil engineering works
Pile construction method

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Ground reinforcement work | SMD method that completely prevents the settlement risk of cohesive soil layers with a sealing effect.

The Minister-approved SMD method prevents differential settlement accidents in weak, viscous soil using an open-type steel pipe and a special inner and outer wing for pipe internal blockage effects.

Ground reinforcement work is a foundational technology designed to prevent uneven settlement of buildings on weak ground and clay layers, ensuring structural safety over an extended period. Particularly when constructing buildings on thick clay layers containing moisture, neglecting appropriate reinforcement in advance can lead to distortions and defects in the structure due to consolidation settlement. The SMD pile method provided by Geotech Co., Ltd. is a Minister of Land, Infrastructure, Transport and Tourism certified rotary driven steel pipe pile method, equipped with special outer and inner wings at the tip of an open-type small-diameter steel pipe. During the rotary driving process, the inner wings capture soil into the pipe to prevent axial deviation, and upon completion of driving to the target depth, the captured soil completely seals off, creating a strong end bearing capacity. This ensures reliable support performance even on clayey ground (equivalent N value of 27 or lower), eliminating settlement risks from the structural foundation. Our company conducts detailed pre-analysis of soil data and automatic tracking using real-time torque management on-site, achieving high-quality ground reinforcement that objectively proves reliable bottoming through data.

企業：ジオテック
価格：Other

Residential foundations
Renovation and repair methods
Other civil engineering works
Pile construction method

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Ground reinforcement using low-noise ETP-G method for urban development | Geotech

Safe construction with low noise and low vibration even in narrow and densely populated areas. ETP-G method.

In urban development, ground reinforcement work requires consideration of limited sites and surrounding environments, with an emphasis on noise and vibration suppression and ensuring safety for adjacent buildings. GeoTech's ETP-G method is a rotary driven steel pipe pile method equipped with a disc-shaped enlarged wing and drilling assist bit at the tip, achieving high-quality construction without impacting the neighboring environment even in narrow or deformed sites. Since it does not use cement milk, there is no generation of dust or mud splashes, keeping the site clean. With a compact and powerful dedicated construction machine, low-noise and low-vibration construction is possible even in areas where heavy machinery is difficult to access. It can accommodate a wide range of applications, such as small buildings with three stories or less and a height of 13 meters or less, as well as retaining walls, allowing for optimal specifications to be selected. GeoTech provides peace of mind to all parties involved through a consistent management system from preliminary surveys to construction and quality assurance. 【Usage Scenarios】 - Construction of buildings on small urban lots - Ground improvement in densely populated residential areas - Retaining wall installation work - Ground reinforcement associated with the expansion of existing buildings 【Benefits of Implementation】 - Reduces noise and vibration impact on neighbors - Maintains a clean site without dust or mud splashes - Enables construction in areas where heavy machinery is difficult to access - Ensures high-quality bearing capacity, improving building safety - Contributes to shortening construction periods

企業：ジオテック
価格：Other

Residential foundations
Renovation and repair methods
Other civil engineering works
Pile construction method

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

SMD method that visualizes construction data for commercial facility construction and ensures quality.

Visualizing reliable construction quality through real-time data tracking with construction management devices and ISO quality management.

In the construction of commercial facilities, a strong and durable foundation is required for long-term stable operation and the safety of users. This is especially important for large structures and facilities used by many people, where reducing the risk of ground subsidence and ensuring structural safety are critical. Inadequate ground reinforcement can lead to early deterioration of the facility or unexpected damage. The SMD pile method by Geotech Co., Ltd. is a Ministry of Land, Infrastructure, Transport and Tourism certified rotary-driven steel pipe pile method that addresses these challenges through the visualization of construction data and a strict quality control system. In addition to the high bearing capacity provided by the special inner and outer wings at the tip of the steel pipe, real-time monitoring and automatic recording of torque and depth data through construction management devices, along with objective stopping judgments by cross-referencing ground investigation data, achieve uniform and high construction quality that does not rely on the operator's experience. With an ISO 9001-compliant quality management system, traceability is established from material procurement to site management and report preparation, ensuring reliable data backing for various ground guarantees. 【Usage Scenarios】 - Ground improvement in the new construction of commercial facilities - Ground reinforcement during the expansion or renovation of existing commercial facilities - Stabilization of extensive ground areas such as parking lots and plazas

企業：ジオテック
価格：Other

Residential foundations
Renovation and repair methods
Other civil engineering works
Pile construction method

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Prevent concrete runoff in the peat layer! "Reseau fond pier Method"

Prevent concrete runoff even in weak peat layers, achieving high-quality pile construction.

The peat layer is extremely soft, and traditional pile construction carries a high risk of concrete leakage, making quality assurance a challenge. The Reseau fond pier Method effectively suppresses concrete leakage by covering the pile reinforcement cage with a Reseau fond net. It enables stable pile construction even in sites with low ground strength. It uses a lightweight and easy-to-handle polyethylene permeable lattice fabric, which can be introduced without increasing construction effort. It accommodates various methods, including earth drill methods and all-casing methods. There are over 250 successful projects in both public and private construction. This method is helpful for ensuring quality and controlling costs in pile construction on peat ground. *For more details, please check by clicking the "Download Catalog" button.

企業：大亜ソイル
価格：Other

Special Construction Method
Pile construction method

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Outflow measures for limestone layers with cracks! "Reseau fond pier Method"

It suppresses the risk of concrete loss due to cracks and voids in the limestone layer.

In limestone layers with cracks, there is a possibility that concrete may flow out through the fissures, leading to increased costs and insufficient pile cross-sections. The Reseau fond pier method covers the perimeter of the rebar cage with a highly durable net, effectively preventing outflow into the cracks, which allows for reduced concrete loss and stable quality. It can be used with various pile methods and can be applied without increasing the burden of construction, which is a significant feature. It boasts over 250 adoption cases in both public and private sectors. It is recommended for sites pursuing reliable pile construction in uncertain limestone ground. *For more details, please check by clicking the "Download Catalog" button.*

企業：大亜ソイル
価格：Other

Special Construction Method
Pile construction method

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Securing pile concrete at a coal mine site! "Reseau fond pier Method"

We will control the outflow into the cavities and cracks of the former coal mine site and ensure the integrity of the pile cross-section.

In abandoned coal mine sites, there are often cases where cavities of various sizes remain underground, posing a risk of concrete leakage during pile construction. The Reseau fond pier method easily covers the outside of the rebar cage with a Reseau fond net, preventing leakage into the cavities and ensuring the designed cross-section is maintained. Due to its lightweight nature, it is easy to handle and can be implemented without compromising construction efficiency. It has a wealth of proven results in both public and private projects and is increasingly adopted as a reliable quality improvement method. This method is useful for projects that aim to ensure reliable pile quality in the special ground conditions of abandoned coal mines. *For more details, please check by clicking the "Download Catalog" button.

企業：大亜ソイル
価格：Other

Special Construction Method
Pile construction method

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Pile construction method - メーカー・企業33社の製品一覧とランキング | イプロス

Pile construction methodのメーカー・企業ランキング

Pile construction methodの製品ランキング

Pile construction methodの製品一覧

Ground reinforcement work for factories and warehouses | Pure Pile Method | Geotech

[For Real Estate] Ground Reinforcement Work | Small-Diameter Steel Pipe Pile Method | Geotec Co., Ltd.

Ground reinforcement work for factory stability in the manufacturing industry | Small-diameter steel pipe pile method

Ground reinforcement work for commercial facilities | Small-diameter steel pipe pile method | Geotech

Ground reinforcement work | Low-noise ETP-G method ideal for construction in narrow sites and residential areas.

Ground reinforcement work | Trust in GBR-C performance certification and high-quality ETP-G method

Ground reinforcement work | Visualizing construction quality through casting torque management with the ETP-G method.

Ground reinforcement work | Trust in GBR-C performance certification and high-quality ETP-G method

Ground reinforcement work | Eliminate settlement risks in narrow sites with ETP method and data management.

Ground reinforcement work | SMD method that reduces site costs with no soil disposal and low noise.

Ground reinforcement work | SMD method to optimize pile layout for mid-rise buildings and steel structures.

Ground reinforcement work | Visualizing construction data to ensure reliable quality with the SMD method.

Ground reinforcement work | SMD method that completely prevents the settlement risk of cohesive soil layers with a sealing effect.

Ground reinforcement using low-noise ETP-G method for urban development | Geotech

SMD method that visualizes construction data for commercial facility construction and ensures quality.

Prevent concrete runoff in the peat layer! "Reseau fond pier Method"

Outflow measures for limestone layers with cracks! "Reseau fond pier Method"

Securing pile concrete at a coal mine site! "Reseau fond pier Method"

Pile construction methodに関連する検索キーワード

Pile construction methodの関連カテゴリ