Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
286～300 item / All 304 items
A roller that improves the wear resistance and corrosion resistance of pipes by bonding rubber to the surface.
This roller improves the wear resistance and corrosion resistance of pipes by bonding rubber to the surface of a steel pipe roller. There are two types available: NR type (natural rubber wrapped) and NBR type (nitrile rubber wrapped), which has superior oil resistance.
A roller with improved wear resistance and corrosion resistance by press-fitting PVC pipes on the surface.
This is a roller with a PVC pipe pressed into the surface of a steel pipe roller. It has excellent corrosion resistance and chemical resistance, making it unaffected by most acids, alkalis, and salts, thus maintaining its original performance over a long period. The PVC pipe used is VU pipe.
A roller made of hard PVC (VP) that has high chemical resistance, acid resistance, alkali resistance, and excellent water resistance.
This is a roller made of hard PVC (VP) that has high chemical resistance, acid resistance, and alkali resistance, as well as excellent water resistance. It does not transfer odors or colors to materials, is hygienic, and is characterized by being lightweight and durable.
Lightweight rollers for lightweight flat carrier idlers (LFCL type, LFCH type)
This is a roller used for lightweight flat carrier idlers (LFCL type, LFCH type).
It is not possible to avoid dimensional changes over time to some extent.
Rubber products tend to undergo relatively slow shrinkage and deformation even after vulcanization, especially those that contain volatile components in their rubber formulations, making it impossible to avoid some degree of dimensional changes over time. For such products, it is generally recommended to let the rubber rest (aging) for a certain period after vulcanization before processing and measuring. Alternatively, measures such as post-vulcanization (secondary vulcanization) using an oven may be necessary after the original vulcanization process is completed. Customers viewing our product pages from the fields of construction materials, interior design, pharmaceuticals, and food technology, please download from the link provided below for the "Catalog Download Dedicated Site."
Regarding dimensional accuracy, of course, the characteristics of the measuring instrument also have an impact.
Most measuring instruments, excluding laser types, such as dial gauges and digital calipers, are contact-type, and rubber materials have a tendency to deform even under slight pressure. Therefore, some individual differences and errors due to habits are unavoidable. Additionally, the influence of environmental temperature during measurement must be considered. Consequently, to prevent such issues when manufacturing high-precision products, it is essential to communicate with customers regarding the specifications of the measuring instruments used and the setting of environmental temperature during measurement. Furthermore, for more accurate measurements, it is necessary for the rubber surface to be clean; however, the action of solvents during solvent wiping causes the rubber to expand slightly. Therefore, it is also important to allow a brief drying time after solvent wiping. Customers viewing our product pages from the construction materials, interior, and pharmaceutical food technology sectors are kindly requested to download from the link provided below, "Catalog Download Dedicated Site."
List of physical properties of rubber materials! *These are measured values and do not guarantee performance.
Our company conducts all processes from core processing of rubber rollers to rubber mixing, molding, and grinding, providing integrated production, sales, and services for rubber rollers. Here is a list of the physical properties of rubber. The aging properties section contains actual measured values from aging tests. *Please note that these are measured values and do not guarantee performance. [Excerpt of Physical Properties] ■ Liquid urethane ether type, natural color ■ Liquid urethane ester type, natural color ■ EDPM, black ■ EDPM, gray *For more details, please refer to the PDF document or feel free to contact us.
It is expected to grow at an average annual growth rate of 5.6% from 2024 to 2030.
The global agricultural hydraulic roller market is expected to grow at a compound annual growth rate of 5.6% from 2024 to 2030. The main drivers of this market are the increasing interest in mechanical farming, the growing focus on improving agricultural productivity, and particularly the adoption of cutting-edge agricultural machinery and equipment in emerging economies. Major companies in this market are focusing on expanding manufacturing facilities, investing in research and development, improving infrastructure, and leveraging integration opportunities across the value chain. These strategies enable agricultural hydraulic roller companies to respond to increasing demand, maintain competitiveness, develop innovative products and technologies, reduce production costs, and expand their customer base. This report provides a detailed analysis of the agricultural hydraulic roller market, including forecasts by product, application, and region. It also discusses the strategies and challenges of key market players in detail.
The low ink transfer, which has been a challenge in water-based flexo printing, has been achieved at 95-100%. Moreover, it allows for high-definition printing, savings on ink costs, and prevention of mottling effects.
A special powdered material for which CAE Corporation has obtained exclusive patent rights, enabling automatic processing in sync with ceramic processing. ■ Smooth and high hardness resembling black pearls ■ High-precision cell wall width structure ■ The occurrence rate of fine pores is less than 0.5%. ■ Ink transfer rate improvement (95-100%) allows for over 20% reduction in ink costs. ■ Flexible cell customization ■ Significantly improved cleaning efficiency, allowing for long-term storage of initial anilox specifications ■ Capable of ultra-high dimensional flexographic printing
Are you missing the dust stuck to your gloves? Thoroughly remove dirt and dust from your gloves! A sticky roller for gloves.
Conventional peel-off adhesive rollers have the problem of dust that has been picked up scattering when peeling the sheet, and the disposal of the sheets incurs costs. Hand rollers use water to wipe away dirt, so there is no scattering of dust, and they can be reused without generating waste. 【Key Points of the Hand Roller】 ■ Removes over 90% of dirt from gloves and clothing! Made from soft urethane gel material. It conforms to uneven surfaces and removes dirt that is not visible to the eye. ■ Contains "antibacterial and antifungal agents"! Safe to use even in food factories where the growth of bacteria and mold is a concern. ■ Does not use silicone in the materials. ■ No adhesive used! It removes dirt using the self-adhesive properties of urethane, so it does not transfer glue to clothing and does not feel sticky. ■ Washes off dirt with water! Can be fully washed! When dirty, washing with water restores the adhesive properties, allowing for repeated use. *For more details, please download and view the catalog.
Roller used for the YC type carrier idler of the trough type.
This is a roller used for the YC type carrier idler with a two-trough design. The basic specifications are the same as those of a standard carrier roller (type C), but the roller width is longer for the two-trough type.
Steel pipe rollers made according to the most commonly used JIS standards.
This is a roller made of steel pipe that is most commonly used according to JIS standards. The roller that supports the belt on the return side is called a return roller.
Center roller of type A pressed return idler (3-groove offset type)
This is a roller used as a center roller for type A pressed return idler (3-groove offset type).
![Wear-resistant silicone rubber roller for film manufacturing [with physical property comparison data available]](https://image.www.ipros.com/public/product/image/23f/2000376491/IPROS5341623682433194063.GIF?w=280&h=280)
High-strength, wear-resistant silicone rubber reduces roller wear and deformation, extending its lifespan!
Conventional silicone rubber has weak physical strength in terms of tensile, tear, and abrasion resistance, which can lead to wear and deformation due to friction with transported items. As a result, there was a problem where the lifespan of rollers would be shortened in applications with heavy loads. The high-strength, abrasion-resistant silicone rubber rollers for film developed by Sheep Ron Chemical achieve high physical strength and abrasion resistance through a special formulation, making them silicone rubber rollers that do not leave work marks. They maintain the heat resistance and weather resistance characteristics of conventional silicone rubber, and we can provide a range of rubber hardness from 60° to 80°, making them ideal for situations requiring strength and abrasion resistance, such as film transport, calendering, and lamination rollers. 【Features】 ■ High abrasion resistance! ■ Excellent physical strength in terms of tensile and tear! ■ Heat resistance and weather resistance are equivalent to conventional silicone rubber! *Technical materials comparing the properties of other rubbers are available for free! For more details, please contact us or download our catalog to view.
![[Construction Example] Generator Installation FK Roller Low Floor Type](https://image.www.ipros.com/public/product/image/caa/2000443506/IPROS17979688461176261588.png?w=280&h=280)
Professional heavy lifting by 'Heavy Lifting Experts'. For transporting and moving generators! Safe for indoor use with polyurethane wheels! Capable of transporting up to 10 tons with a 100V power supply.
Japan frequently experiences natural disasters such as earthquakes, typhoons, and flooding. In recent years, there has been an increase in the installation of large standby generators in large commercial facilities, high-rise buildings, office buildings, and factories. When it comes to installing generators in existing buildings, there are many constraints at the site, such as the inability to use lifting equipment or difficulties in obtaining counterforce. This time, we have introduced the "FK Roller Low Profile Type" for positioning during the installation of large standby generators. It can be used from a 100V outlet. There are no unnecessary wiring or control devices, and it comes standard with a manual handle. Additionally, it features polyurethane wheels for indoor use. We offer standard models for 10t and 20t, and we have a track record of producing 40t transport types (200V specification). We can accommodate various custom specifications, so please feel free to consult us. 【Features】 ■ Usable from a 100V outlet ■ No unnecessary wiring or control devices ■ Standard manual handle included ■ Polyurethane wheels (suitable for indoor use) ■ Weight approximately 87kg ■ Equipped with lifting rings * For more details, please refer to the catalog or feel free to contact us.
