1～15 item / All 38 items
Steel pipe rollers made to the most commonly used JIS standards.
This is a steel pipe roller made according to the most commonly used JIS standards. The roller that supports the belt on the carrying side (carrier side) is called a carrier roller.
A roller with a groove-shaped impact rubber that mitigates the drop impact of transported items.
This is a roller used at the idler in the impact area where transported items fall, such as hoppers and chutes, on a conveyor. The groove-shaped impact rubber is bonded to a steel pipe roller, preventing surface peeling and mitigating the impact of the fall.
A roller that mitigates the impact of falling objects during flat transport.
This is an impact type of flat carrier roller (FC type). It is used in areas where you want to mitigate the impact of falling items during flat transport. The groove-shaped impact rubber is bonded to a steel pipe roller, eliminating concerns about surface peeling.
Roller with a surface coated with soft rubber (smart rubber) of hardness 32° t5 for adhesion prevention measures.
This is a roller with a surface coated with soft rubber (smart rubber) with a hardness of 32° Shore A. Due to its very high rebound elasticity, it prevents adhesion of wet materials, high-viscosity materials, and ice to the roller surface, and its excellent wear resistance contributes to reducing the frequency of replacements.
A roller with improved wear resistance and corrosion resistance by press-fitting PVC pipes on the surface.
This is a roller with a PVC pipe pressed into the surface of a steel pipe roller. It has excellent corrosion resistance and chemical resistance, and is not affected by most acids, alkalis, and salts, allowing it to maintain its original performance over a long period. The PVC pipe used is VU pipe.
A roller made of hard PVC (VP) that has high chemical resistance, acid resistance, alkali resistance, and excellent water resistance.
This is a roller made of hard PVC (VP) that has high chemical resistance, acid resistance, and alkali resistance, as well as excellent water resistance. It does not transfer odors or colors to materials, is hygienic, and is lightweight and durable.
A return roller that reduces the drop (falling debris) of attachments on the belt using multiple rubber rings.
Similar to the one with a sleeve, this return roller is specialized in reducing the dropping of materials adhering to the belt (falling ore) by placing multiple rubber rings on the surface of the iron roller.
A roller that scrapes off adhered items while rotating, due to its symmetrical spiral shape.
The roller surface, which has a symmetrical spiral shape, has the function of scraping off the "adhesion" of transported items that cause belt wandering and misalignment while rotating. It is recommended to install it in areas within the conveyor system where you want to promote the flow of bulk materials.
Custom rollers with non-standard dimensions.
JRC refers to rollers made to non-standard dimensions as "B-type rollers," and we can manufacture them as shown in the table below. When placing an order, please check the structural diagrams of each roller and specify your desired dimensions and specifications. We also accommodate special processing such as threading at the shaft end and pin holes. (Please refer to the example of shaft end processing in the diagram below.)
Short rollers used in steep incline conveyors.
At JRC, we also manufacture "short rollers" used in steep incline conveyors. For roller lengths (L1) less than 100L, we recommend the TRJ type (straight bushing type). We also accommodate special processing of shaft end shapes. (Please refer to the diagram below for examples of shaft end processing.)
Lightweight roller for lightweight return idler (LR type)
This is a roller used in lightweight return idlers (LR type).
Roller used for flat carrier idler (JFC type)
This is a roller used in flat carry idlers (JFC type) that are used to transport "bulk items" through skirt rubber, in addition to "voluminous items" such as beer cases, cement bags, and grain bags.
A roller with a hollow type impact rubber that mitigates the drop impact of transported items.
This is a roller used at the idler in areas where transported items drop, such as hoppers and chutes (impact areas), on a conveyor. It is made by bonding a hollow-type impact rubber to a steel pipe roller, which prevents surface peeling and mitigates the impact of the drop.
Rollers with different diameters on the left and right used for snake prevention measures.
It is a roller with different diameters on the left and right, used as a side roller for tapered automatic centering carrier idlers (single-axis and dual-axis).
Center roller for taper type automatic centering carrier idler.
This is a center roller used for taper-type automatic centering carrier idlers (single-axis and dual-axis).
