Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
76～90 item / All 1142 items
ICB filter
Removal of acids and dissolved metals (ICB). The ICB filter module uses weakly basic anion resin and removes all acids and dissolved metals. Additionally, the ICB filter does not perform actual ion exchange (separation of neutral salts).
Acquisition of overseas safety standards! Significant effectiveness in countering conducted noise in the 150 kHz to 30 MHz frequency range.
The "E21NFB Series" is an EMI filter that is highly effective for conducting noise countermeasures in the frequency range of 150 kHz to 30 MHz. Due to its compact, lightweight, and low-profile design, it achieves effective noise countermeasures while saving space. It features a spring-up terminal block that allows for easy installation and comes with a cover for safe use. Additionally, it complies with UL standards, EN standards, and CSA standards, making it suitable for equipment exported to North America and the EU. 【Features】 ■ Complies with international safety standards ■ Compact, lightweight, and low-profile for space-saving ■ High efficiency and safety in installation design ■ Equipped with a spring-up terminal block ■ Comes with a cover *For more details, please refer to the PDF materials or feel free to contact us.
Measures for kitchen exhaust! Powerful deodorization of kitchen exhaust odors!
The deodorizing filter "Zeogaia" exhibits high deodorizing performance against a wide variety of cooking odors. It is made by combining several types of raw materials suitable for the removal of cooking odors into a filter. In particular, it has high removal performance against burnt odors, which are a major cause of odor complaints and have been difficult for traditional adsorbents like activated carbon to handle. 【Main Features】 ○ High deodorizing performance ○ Low pressure loss ○ High cost performance ○ Soundproofing effect ◎ For more details, please contact us or download the catalog.
Exhaust countermeasure! Case study of supplying ceramic deodorizing filters to food factories and kitchen equipment.
This document introduces examples of the implementation of "Zeogaia" as a measure for exhaust from restaurants. It provides detailed cases of its introduction to address the odors from garlic fryers in a seasoning factory, soy sauce-related burnt smells in a prepared food factory, and stimulating odors from garlic, ginger, and soy sauce in a food factory. It also includes information on air volume and deodorization effectiveness, making it a useful reference when considering implementation. We encourage you to read it. 【Featured Cases】 ■ A certain Chinese restaurant in Nogizaka ■ A certain fried chicken specialty store in Saitama Prefecture ■ A certain supermarket in Kitasenju ■ A certain seasoning factory in Saitama Prefecture ■ A certain prepared food factory in Osaka Prefecture ■ A certain food factory *For more details, please refer to the PDF document or feel free to contact us.
What is the true threat to fluid systems? What is the "chain reaction of wear"? Introducing an innovative approach to improve system reliability. Essential information for safety measures.
Did you know? 80-90% of the products manufactured worldwide are made of carbon steel. This becomes ultra-hard and ultra-sharp carbon steel fine powder due to wear from operation, and when it moves freely through the fluid system circulation, a destructive process called "wear chain reaction" occurs. Magnum reliably captures these iron fine particles, which are threats that conventional filtration systems (filter-element type and magnetic type) could not address. Moreover, once captured, the contaminants cannot escape. There is also no clogging, which is common with filters. Is such a thing possible? It is. Its effectiveness has been proven in many field applications.
Report on the installation example of the lubrication system for wind power plant gearboxes. For the safety and reliability of fluid systems where regular inspections are difficult due to installation environments, such as offshore.
A Magnum has been adopted for the lubrication line of a 750 kW generator's gearbox located in Sweden. A Magnom Clear 5" was installed downstream of an existing 10-micron filter, and after six months of normal operation, when the internal core was removed, a significant amount of contamination, including metal wear particles as small as 0.2 microns, was found, surprising those involved. Such fine metal contamination can trigger a wear chain in the gearbox, demonstrating the performance of the Magnum filter, which can efficiently and safely remove it. Wind power is relatively efficient, converting about 30-40% of the kinetic energy of wind into electrical energy, making it difficult to emit greenhouse gases, and is therefore attracting attention as one of the measures for SDGs. However, due to the difficulty of regular inspections depending on the installation location (such as offshore), the safety and reliability of fluid systems are particularly important.
The cooling system for power generation plants is important to ensure that equipment operates properly with the appropriate filters, preventing equipment failure and unplanned production stoppages.
Efficient magnetic filters play a significant role in improving the performance of filtration devices and filter systems/fluid control, enhancing/reducing the running costs of systems, and increasing operational efficiency. They have improved the reliability of systems at nuclear power plants in the Czech Republic. They were introduced to reduce failures of various mechanical devices, such as electric valves in steam lines, which were previously considered impossible to address. Magnum was introduced in the steam generator blowdown sample line of steam generator number 4 at the nuclear power plant. This area is of great interest to plant owners and operators from the perspectives of efficiency (energy is wasted during the blowdown process, but the efficiency of the steam generator improves) and safety (especially in nuclear power plants, where the entire steam generation process is strictly managed). In the future, it will be necessary to further increase power generation efficiency to reduce greenhouse gas emissions (carbon dioxide). Before the installation of Magnum, contaminants continued to circulate through conventional filters (most of which were smaller than 1 micron). These hard and sharp metal particles likely caused cascading wear, eroding all valves and stationary parts of the system, thus threatening the overall safety of the nuclear power plant.
Magnetic filter that does not clog the lubrication system of aircraft jet engine gearboxes.
◆High-speed rotating jet engines operate in harsh environments. The important gearbox that assists the jet engine in functioning properly. Lubricating oil must always be supplied to each mechanism and circulate smoothly. The challenge was how to efficiently remove submicron-level hard metal particles suspended in the lubricating oil. ◆Introduction Story The development project for a magnetic filter for the lubrication line of the gearbox, which is essential for jet engines, started upon receiving a development request from Rolls-Royce. After more than 10 years of extensive research and testing, it finally received certification as official equipment. And it was eventually adopted for the Trent 500 turbofan jet engine for the Airbus A340. The magnetic filter, Magnum, contributes to the safety of air travel.
Can be introduced at low cost! A magnetic filter with no flow reduction or pressure loss. Proven results in various industries such as aircraft engines, power plants, and wind turbines!
Our company's magnet filters (magnetic filters) have a unique internal structure that captures sub-micron particles using magnets, while preventing clogging and re-emission. This is a new type of magnet filter. By using it in conjunction with conventional cartridge filters, it reliably removes fine iron powder that cannot be captured by filter paper but can cause significant damage to hydraulic circuits and gearboxes when accumulated. It is an essential magnet filter for reducing maintenance frequency and maintaining performance. 【Features】 ■ Reduces or eliminates the consumption of expensive conventional filters for end users. ■ Decreases filter replacement frequency, resulting in longer equipment operating time. ■ Effectively captures fine particles that pose a true threat to the equipment. ■ No clogging of the filter occurs, without causing pressure loss or flow rate reduction. ■ Significantly improves the cleanliness of the fluid system in the equipment. ■ Easy to install and reasonably priced.
The suspension of cutting fluid is due to the circulation of fine particles that were missed by the existing filter. A special filter reliably captures magnetic fine particles down to 0.07 μm!
- Can be installed upstream of existing filters. - Pressure loss, flow rate reduction, clogging, and re-emission are guaranteed to be zero. - Effectively captures metal fine particles down to 0.07μm. - Experience the changes in the suspension state of cutting fluid. - Confirm improvements in product surface roughness and precision with clean cutting fluid. - Significantly reduces the frequency of regular replacement of existing filters. - Contributes to SDGs measures by reducing disposal costs. - Effects are sustained by specially arranged permanent magnets. - Reduced frequency of consumable replacements significantly decreases equipment downtime and improves productivity. - Effectively halts the chain reaction of wear, extending the lifespan of tools.
Originally developed to improve the durability of F1 race engines, the magnetic filter is effective in protecting the lubrication circuit of the cold rolling line in steel mills.
By introducing "Magnum" into the line, we can significantly reduce costs such as repair expenses, parts costs, and downtime. "Magnum" was originally developed to improve the durability of F1 racing transmissions. This is a performance report from a major steel company in Malaysia with a site area of 500 acres. Here, they were troubled by the accumulation of iron contamination in the transmission lubrication circuit of the cold rolling line. Even with two existing filter systems, fine iron contaminants remained in the bearing lubrication circuit. With the introduction of Magnum, it was confirmed that a visibly large amount of iron contamination was captured in just 16 days! Following the trial of Magnum, the maintenance manager was convinced of the effectiveness of Magnum technology based on survey results showing improved oil cleanliness. From the good test results, they decided to purchase an additional seven units for other lines. Our maintenance team was relieved to be able to remove the most harmful iron dust from the line by introducing Magnum, finally putting an end to the chain of wear.
We will completely solve the long-standing issue of small work vehicles equipped with HST that cannot use standard circuit filters! Here is an introduction to an affordable, compact, and easy-to-install product.
The HST allows for stepless speed changes and switching between neutral, forward, and reverse with a single lever operation. However, due to the high-pressure hydraulic lines and the structure that causes the oil flow direction to switch bi-directionally every time the work vehicle moves forward and backward, a standard circuit filter cannot be used. A device with two sets of high-pressure filter housings, each equipped with a check valve, is necessary, but there are the following challenges: - It requires a large installation space. - It incurs significantly high costs. In small systems, the only countermeasure that can be implemented is to install a strainer at the outlet of the reserve tank at best. As a result, we have been unable to find appropriate countermeasures for problems caused by fine iron-based contaminants suspended in the oil. Magnum solves these issues all at once: - It is compact, easy to install, and very inexpensive. - It can be directly connected to bi-directional lines. - There is almost no pressure loss even when it becomes full of contaminants. - Captured iron-based fine particles do not reflow downstream. - It is suitable for high-pressure lines (guaranteed pressure 6000 psi). - It captures 99.97% of iron-based contaminants at the 10um level. Please give it a try.
The harsh working environment and the impact of metal contamination on work vehicles are not surprising. Special magnetic filters are also playing a role here.
The harsh working environments of mines and quarries can cause even high-quality machinery to fail early in their lifespan. Additionally, excessive downtime due to failures is common in excavation operations. The special magnetic filter "Magnum" reliably captures submicron iron-based particles that are difficult to remove with existing filter systems, preventing pressure loss, clogging, and re-emission. It also demonstrates excellent effectiveness in heavy machinery operating on the front lines of the site, such as large excavators and roof bolters, which are affected by metal contamination in hydraulic systems. Please try the "Magnum," which is performing well in overseas sites.
We will participate online in a technology exhibition hosted by the Nikkan Kogyo Shimbun that provides optimal solutions to the diversifying challenges and needs of manufacturing.
In today's diverse fields such as automotive, aerospace, electronics, medical devices, and food processing industries, there is a demand for unique "technologies" that offer unparalleled high added value and high functionality, requiring advanced manufacturing techniques. The "High Precision and Difficult Processing Technology Exhibition" is a technology exhibition that introduces more advanced manufacturing technologies with the theme of pursuing extremes. Our company will showcase a special magnetic filter that can remove ultra-fine metal powders down to 0.07μ, significantly extending machine life.
Excellent stripping power despite being a chlorine-free stripping agent! Environmentally friendly stripping agent "Zorkas Series."
The "Zorkas Series" is a dechlorinated stripping agent that boasts excellent stripping power while being environmentally friendly. Despite being chlorine-free, it has remarkable dissolving power! 【Features】 ■ Achieves stripping power that surpasses conventional chlorine-based solvents ■ Stripping of two-component cured paints and adhesives ■ Dissolution of various thermosetting resins ■ Zorkas EP-110 is a high-viscosity type ■ Not subject to the Organic Solvent Control Law*1 or the Specific Chemical Substance Control Law*2 *1 Organic Law ⇒ Organic Solvent Poisoning Prevention Regulation *2 Specific Law ⇒ Specific Chemical Substance Hazard Prevention Regulation If you let us know your intended use, we can provide samples as well. Please feel free to contact us.
