Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
511～525 item / All 1220 items
![Slump Tester "C-273" [Rental]](https://image.www.ipros.com/public/product/image/965/2000496331/IPROS05467893338046012382.jpeg?w=280&h=280)
This is a testing device that measures consistency (workability) based on the amount of subsidence of the top surface of a standard test specimen (truncated cone) made of freshly mixed concrete.
■Applicable Standard: JISA1101 (Japanese Industrial Standard for the Slump Test Method of Concrete)
![Phase characteristic testing device DGR-5000KD [Rental]](https://image.www.ipros.com/public/product/image/661/2000659675/IPROS04309351321574850008.jpeg?w=280&h=280)
It is a multifunctional digital phase characteristic testing device capable of 5A output.
- Supports various relays - Digital meter adopts precision (0.5%) - Uses terminal type that is easy to use on-site - All-element code standardly included for convenience in PAS and UGS testing - Auxiliary power output is AC100V/DC24・48・110V - Capable of inertia characteristic testing - Power supply synchronization internal oscillation switchable
Test equipment utilizing established technology for wind pressure resistance performance testing!
This device can easily and accurately perform wind tunnel pressure tests as specified in the test standards IEC61646/JIS C8938 and 8991, which simulate natural environments. The setup of solar modules for testing can be conducted under conditions similar to actual site installation, using the same brackets and fixing methods. Additionally, a dedicated mounting jig for the modules is also standard equipment. 【Features】 - The airtight seal around the solar module uses a highly elastic sponge rubber. - It can be operated and controlled by anyone. - Comprehensive safety measures are in place against module damage and abnormal pressure. *For more details, please download the PDF or feel free to contact us.
Remote control is possible with the operation panel! Safety measures such as safety fences and safety sensors can also be manufactured according to your preferences.
This device is a testing apparatus that launches 2x4 lumber and steel balls using compressed air, as specified in JIS R 3109:2018. Our unique speed measurement method allows for speed measurement with an accuracy of over 5000 fps using a high-speed camera. The barrel is made of special steel pipe, achieving a launch speed accuracy of ±2%. 【Features】 ■ Can precisely control air pressure in the range of 20 kPa to 300 kPa (upon request, air pressure above 300 kPa is also possible) ■ Speed measurement with an accuracy of over 5000 fps using a high-speed camera ■ The barrel is made of special steel pipe, achieving a launch speed accuracy of ±2% ■ Remote operation is possible via the control panel ■ Safety measures such as safety fences and safety sensors can be manufactured upon request *For more details, please refer to the PDF document or feel free to contact us.
We offer a lineup of devices such as wind pressure testing equipment! You can check and evaluate displacements, stresses, and water leaks in each part.
In recent years, buildings have featured unique appearances and innovative designs such as full glass facades, making it difficult to conduct displacement and stress analysis due to external forces like earthquakes and typhoons solely through computer simulations. Our testing equipment allows for the direct application of deformations and loads equivalent to those from earthquakes and typhoons on actual building materials, enabling the confirmation and evaluation of displacements, stresses, and water leaks. The "Wind Pressure Testing Device" is placed over the seismic testing specimen, where wind pressure loading and water spraying are conducted within a pressure box. The "Seismic Testing Device" installs a test wall on a virtual slab section corresponding to the building's beams, allowing for the reproduction of displacements between each floor for testing. 【Seismic Device Specifications】 ■ Test Specimen - Type: PC, stone, tile, aluminum materials - Weight: Max 40TON - Dimensions: W8–10m, H10–13m, L part D2.5–3.6m ■ Testing Items: In-plane, out-of-plane, simultaneous in-plane and out-of-plane, corner tests, research on construction methods ■ Optional Tests: Local wind and rain, thermal radiation tests, etc. *For more details, please refer to the PDF materials or feel free to contact us.
Introducing a portable flame test device that can easily be moved by hand and is capable of delivering uniform airflow!
The "Flying Ember Test Device" is a testing apparatus used to verify whether roofing materials possess the ability to prevent ignition from flying embers generated by surrounding fires, thereby stopping flames from spreading to the roofing material itself, the underside of the roof, or adjacent buildings (ember resistance performance). This device consists of a wind tunnel that delivers a rectified airflow and a test specimen support frame that sets the test specimen at a specified position and angle. To allow testing at multiple angles of roofing materials, both the airflow ejection angle and the test specimen inclination angle are adjustable. 【Features】 - The wind tunnel device has a variable airflow ejection angle while minimizing disturbances in areas where the airflow path shape changes, allowing for a uniform airflow. - The test specimen support frame can accommodate test specimens weighing up to 500 kg and allows for variable elevation and inclination angles (both movements are electric). - Both the wind tunnel device and the test specimen support frame are compact and portable, making them easy to move manually. *For more details, please refer to the PDF materials or feel free to contact us.*
Introduction of a device that can reproduce insulation tests based on JIS/ISO standards and environmental conditions in the field!
Recently, there has been a high demand for comfort in living conditions, quality of each product, and reliability, leading to corresponding research and development efforts. Additionally, how energy-efficient recent residential and commercial buildings are has become an important point. This device is capable of conducting insulation tests and reproducing environmental conditions in the field for single and composite materials used in these applications, based on JIS and ISO standards. 【Possible Tests (Partial)】 ■ Insulation and Condensation Tests - JIS A4710 Insulation Testing Method for Building Components - JIS A1420 Measurement Method for Insulation of Construction Materials - Calibration Heat Box Method and Protective Heat Box Method - JIS A1514 Testing Method for Condensation Prevention Performance of Building Components *For more details, please refer to the PDF document or feel free to contact us.
A design that suppresses noise generation from the rectifying mesh! A low turbulence, low noise wind tunnel system with a single-path recirculation.
The "Low Turbulence Low Noise Wind Tunnel System" is an experimental wind tunnel designed for measuring the aerodynamic noise of objects and airflow disturbances. The discharge nozzle is designed to reduce airflow disturbances with a sufficient contraction ratio while minimizing noise generation from the rectifying mesh. Please feel free to contact us if you have any inquiries. 【Specifications】 ■ Wind Tunnel Type: Single Circuit Recirculating ■ Measurement Chamber: Anechoic Chamber Structure ■ Temperature Control: Water-Cooled Circulation System ■ Measurement Section Dimensions: W500×H500×L1500 ■ Wind Speed Range: 3–50 m/sec ■ Motor: DC 45 kW *For more details, please refer to the PDF document or feel free to contact us.
High degree of configurability, can be placed above windows and doors! Significantly reduces the impact of earthquakes.
The "S042" is a vibration control device for wooden houses that features the ability to apply significant braking and dampening from small tremors before the structural components of the building are damaged, regardless of the impact. The "Bilinear Characteristics" enhance the performance of the vibration control. This characteristic is designed to prevent damage to the structure as the control device increases the "damping force" that absorbs energy. 【Features】 ■ Applies significant braking and dampening from small tremors before the structural components of the building are damaged. ■ High flexibility in placement, can be installed above windows and doors. ■ Enhanced performance with "Bilinear Characteristics" *Patent obtained. ■ Total quality. ■ Effective instantly from small tremors. *For more details, please refer to the external link page or feel free to contact us.
A composite cycle testing machine that can simulate the usage environment of products and materials.
The "CCT-1LM" is a composite cycle testing machine designed for easy loading and unloading of various samples. Through cycle tests that combine test items such as salt spray, drying, wetting, saltwater immersion, outdoor air introduction, low temperature, wetness, and high humidity, it allows for testing that simulates the usage environments of products and materials (such as subtropical and cold regions). The testing chamber's door has been completely redesigned from a conventional hinged type to a sliding type, preventing water droplets that adhere to the inside of the door from dripping and dirtying the floor. 【Features】 ■ New design for easier usability ■ Structure that facilitates easy loading and unloading of various samples ■ Sliding door that does not dirty the floor or obstruct pathways ■ Capable of simulating the usage environments of products and materials ■ Built-in exhaust treatment device available (optional) *For more details, please refer to the PDF materials or feel free to contact us.
Using high-durability melamine board.
This product features a revolutionary grip made from melamine plywood for the handles of putty knives and trowels. Melamine decorative plywood is a plastic sheet formed by layering multiple sheets of impregnated paper, where melamine resin and phenolic resin are each impregnated into printed paper and kraft paper, dried, and then laminated under high temperature (150°C) and high pressure (approximately 100kg/cm²). Maintenance is easy, and there is no need to worry about water exposure or paint peeling. Please feel free to consult us if you have any requests. *For more details, please do not hesitate to contact us.
Introducing a case study of comprehensive analysis centered on spectral analysis through machine analysis!
Our company is engaged in the analysis solution business. This document presents a case study on preparing a pickling solution using a new rust inhibitor that is expected to have the same effectiveness as the current pickling solution containing rust inhibitors. We conducted electrochemical tests on several commercially available pickling solutions and the current product, and we have included examples of commercially available products that demonstrated equivalent effectiveness to the current product. [Contents] ■ Overview ■ Features ■ Analytical Procedure ■ Analytical Results *For more details, please refer to the PDF document or feel free to contact us.
Conduct evaluations with condition settings that meet various needs! An explanation of combined cycle testing.
Our company is engaged in the analysis solution business. This document presents composite cycle tests that excel in promoting and reproducing tests, and have a correlation with outdoor exposure tests. We can conduct evaluations under various conditions tailored to different needs (real-world environments), such as salt spray environments (Salt Spray Test: SST). 【Contents】 ■ Overview ■ Cycle Test Machine Specifications ■ Performance Evaluation of Coated Test Specimens ■ Related Standards *For more details, please refer to the PDF document or feel free to contact us.
Used for securing the siding line. No insulators or binding wires are needed.
Used for securing the siding line. Insulators and binding wires are not needed. *For more details, please check our company's e-commerce site.↓
Compliant with ASTM D6773! Measuring the flowability of powders with a compact tabletop type. Requires minimal samples for pharmaceuticals and food manufacturing!
It can measure the flow characteristics of powders and solid bulk materials with particle sizes up to 1.5 mm. Compared to previous devices, it is easy to operate due to computer control and is robust and highly accurate. The sample volume is small, ranging from 3.5 to 70 mL, and the device is compact, making it ideal for use on the desktops of laboratories and factories that handle powders. This RST-XS.s can measure cohesive forces, internal friction (between particles), wall friction (between particles and walls), and compressibility (bulk density as a function of pressure). - For product development, property evaluation, and quality control - For troubleshooting process anomalies such as arching and rat-holing - For determining design parameters of mass flow hoppers - The operation method is simple, and the measurement time is about 20 minutes per sample - Sample volumes are 3.5, 9, and 70 mL (standard is 30 mL) - Referenced in the 17th edition of the Japanese Pharmacopoeia (flowability of powders, 4. shear cell method)
