Norbert Schaefli test printing device
Swiss-made large-scale test printing device
Test printing equipment manufacturers that attracted attention at DRUPA 2012.
- Company：アイジーティ・テスティングシステムズ
- Price：Other
Testing Machine Product List and Ranking from 256 Manufacturers, Suppliers and Companies | IPROS
Last Updated： Aggregation Period:Sep 16, 2026～Oct 13, 2026
This ranking is based on the number of page views on our site.
Testing Machine Manufacturer, Suppliers and Company Rankings
Last Updated： Aggregation Period:Sep 16, 2026～Oct 13, 2026
This ranking is based on the number of page views on our site.
- Toyo Seiki Seisaku-sho, LTD. Tokyo//others
- インストロンジャパンカンパニイリミテッド 日本支社 Kanagawa//others
- アイ・ティー・エス・ジャパン Chiba//Electricity, Gas and Water Industry
- 4 エフティーエス Tokyo//Trading company/Wholesale
- 5 ソーキ Osaka//Service Industry
Testing Machine Product ranking
Last Updated： Aggregation Period:Sep 16, 2026～Oct 13, 2026
This ranking is based on the number of page views on our site.
Testing Machine Product List
991～1020 item / All 1263 items
Displayed results
Technigraph UV Measurement and Testing Equipment
UV measurement and testing equipment
German Technigraph UV Measurement and Testing Equipment
- Company：アイジーティ・テスティングシステムズ
- Price：Other
Frank PTI pulp testing device
German paper pulp testing equipment
Many testing devices for paper and pulp are available.
- Company：アイジーティ・テスティングシステムズ
- Price：Other
IGT Flexo Proofing Machine
The IGT flexo testing machine has been model changed.
From the flexo testing machine F1 to the IGT flexo proofing machine!
- Company：アイジーティ・テスティングシステムズ
- Price：Other
Thermal shock testing equipment
For heat resistance testing before product shipment
- It consists of two stages: a separately controlled heating zone and a heating/cooling zone, allowing for rapid temperature changes of the product by moving it between zones using an inter-zone elevator. - The time required for movement between zones is less than 10 seconds. - The lower heating/cooling zone can operate as an independent temperature cycling test device.
- Company：ソリッド・ソリューションズ
- Price：Other
Temperature and Humidity Environmental Testing Equipment
We offer a variety of environmental testing equipment in different sizes to meet our customers' needs.
- Stability testing, temperature cycling, and accelerated stress testing - Size range of workspace from 0.22㎥ to 2.71㎥ for Z-Plus temperature test chamber - Optional touch screen controller for easier operation
- Company：ソリッド・ソリューションズ
- Price：Other
Altitude testing device
Combine temperature and altitude with optional humidity to test various components and subassemblies.
- The standard altitude chamber simulates altitudes of up to approximately 30 km (1093 Pa), with an optional simulation of up to approximately 53 km (49.3 Pa). - It is also possible to simulate sea level tests when significantly above sea level using the optional extended range.
- Company：ソリッド・ソリューションズ
- Price：Other
EW Defense Sensor Testing Device
Testing three types of warning sensors: radar, laser, and missile.
Simulate the radiation of any EW threat using wideband high frequency / IR / UV to test the alarm system. - Wideband microwave for radar alarm testing - Infrared for laser alarm testing - Ultraviolet for missile alarm testing Please refer to the catalog for detailed specifications.
- Company：ソリッド・ソリューションズ
- Price：Other
![[Renovation Possible] Wooden Building Vibration Control Device DYNACONTI](https://image.www.ipros.com/public/product/image/26a/2000284453/IPROS4082633470780488957.PNG?w=280&h=280)
[Renovation Possible] Wooden Building Vibration Control Device DYNACONTI
Damage accumulated from repeatedly occurring earthquakes, is it enough to rely solely on seismic standards? A vibration control device for wooden buildings that protects against earthquakes in the long term.
When repeated earthquakes occur, "earthquake resistance" gradually deteriorates, making it difficult to maintain the earthquake resistance performance of a newly built structure. The wooden building vibration control device "DYNACONTI" is a hydraulic vibration control device that utilizes the viscosity of oil. When an earthquake occurs, the horizontally installed damper moves in the opposite direction of the building's sway, applying a brake to the building's movement and reducing damage. It can be installed not only in newly built wooden structures but also in renovations. "Earthquake resistance" protects the building, while "vibration control" protects the earthquake resistance function, ensuring long-term protection for the building. 【Features】 ■ Reduces damage by slowing down shaking and movement caused by earthquakes ■ Effective from small tremors to major earthquakes ■ Compatible with wooden structures and comes with a reassuring 10-year warranty ■ Compact and low-cost ■ Highly durable and maintenance-free ■ Reliable domestic product (manufactured by Yamaha Motor Hydraulic) *For more details, please contact us or download the catalog.
- Company：オーディーエム
- Price：Other
Generator load testing machine
A generator load tester that automatically performs everything from a simple generator power factor load device to data acquisition.
Generator Load Testing Machine **Features** 1. Adoption of digital display for voltage and current readings with phase display functionality 2. Display of rotational speed, rotation direction, and frequency Others Service outlet
- Company：東洋電装
- Price：Other
Bag Strength Testing Machine Seal Tester Model JC-01A-1507
A pressure-type seal strength testing machine widely used in the pharmaceutical, cosmetics, and food industries. It is a device for testing the seal strength of pouch and tube products.
* Contact: Morioka from the Machinery Division 【Mobile: 080-7689-3897】 - This is a minor change model of the old JY-1507 type. - Measurement starts with a one-push operation. - Compact, lightweight, and space-saving tabletop model. - Measurement range is 1 to 150 Kg. - Alarm sounds with a buzzer in case of seal failure. - Pressure and timer during seal failure are held for display. - Power supply: AC100V - Air source: 0.2 to 0.7 MPa - Calibration services are also available, including for the old JY-1507 type.
- Company：J・P・Fエンジニアリング 機械事業部 森岡
- Price：500,000 yen-1 million yen
Testing Equipment "Water Pressure and Temperature Testing Device"
This is a test device for controlling the pressure and temperature inside a 2" pipe.
The "Water Pressure and Temperature Testing Device" is a testing apparatus that controls the pressure and temperature inside a 2" pipe. It is ideal for temperature and pressure characteristic testing. 【Features】 ○ Allows for the installation of test samples inside the pipe and extraction of electrical signals ○ Suitable for pressure and temperature characteristic testing of fiber products For more details, please contact us or download the catalog.
- Company：サタコ
- Price：Other
Pressure testing device "Pressure gauge calibration device"
This is a pressure testing device capable of conducting pressure tests up to 70 MPa.
The "Pressure Gauge Calibration Device" is a pressure testing device capable of conducting pressure tests up to 70 MPa. SATACO engages in business activities with a strong emphasis on safety, the environment, and energy conservation. We provide the best proposals through development, design, manufacturing, and maintenance focused on water, air, and heat. Our goal is not only to be of service to our customers but also to grow and prosper together with them. 【Features】 ○ Built-in booster type capable of pressurizing up to 70 MPa ○ Suitable for high-pressure gas manufacturing equipment testing ○ Equipped with a safety cover for secure operation ○ Capable of handling oil-free, water-free, and contamination issues For more details, please contact us or download the catalog.
- Company：サタコ
- Price：Other
Pencil hardness tester
Pencil hardness test to evaluate the hardness of the coating film. It is a high-performance, cost-effective model.
It is used to measure the hardness of coatings. It is designed to apply a load of 750g ±10g at the tip of the pencil. The angle of the pencil is fixed at 45° ±1°, and there is a level on the top of the testing device. By using this equipment, reproducible tests can be conducted, allowing for the same evaluation regardless of who performs the test. The main body is made of steel and is powder-coated, with a product specification that ensures the load accuracy is within 750g ±5g. It is a high-precision model with high cost performance. It is also effective for applications beyond painting. It is used for evaluating the hardness of hard coatings on films, assessing the surface hardness of liquid crystal displays (LCDs), and evaluating the hardness of plastic products, making it a standard for hardness evaluation. The lineup includes three types with loads of 750g, 1000g, and 500g, each corresponding to JIS-K5600-5-4, JIS-K5400, and industry-specific standards (500g), respectively.
- Company：オールグッド
- Price：10,000 yen-100,000 yen
Automatic Coating Film Evaluation Tester
Supports various coating evaluations with one device! Automation enables stable and accurate evaluation tests.
The "Automatic Coating Film Evaluation Tester" is a device that can perform cross-cut tests, scratch hardness tests (pencil method/weighted needle method), and abrasion tests fully automatically. It can be used simply by setting the test piece and operating it via a liquid crystal touch panel, eliminating unstable factors associated with manual work and enabling accurate test results. With a protective cover, cross-cut tests can also be conducted safely. 【Features】 ■ Tests can be conducted at accurate speeds, loads, and directions ■ Tests can be performed on coatings from metal substrates to coatings on PET films ■ Main body size is W550×D410×H520mm ■ Supports detailed condition settings *For more details, please refer to the PDF materials or feel free to contact us. The basic information section also introduces "Adhesion Testers" and "Applicators."
- Company：オールグッド
- Price：Other
Rotary crosshatch cutter
The cross-cut test can be performed on actual products, leading to an improvement in quality!
Using the "Rotary Cross Hatch Cutter," cross-cut tests (grid tests) to evaluate the adhesion and bonding strength of coatings can be performed on products with curved surfaces. For pipe-shaped objects, cuts can be made down to a minimum diameter of Φ40mm. The tip is equipped with multiple blades, allowing for six cuts to be made in the coating at once. Not only can evaluations be conducted on flat test pieces, but cross-cut tests can also be performed on actual products, leading to improved quality. 【Features】 ■ Cross-cut tests (grid tests) to evaluate the adhesion and bonding strength of coatings can be performed on products with curved surfaces. ■ Cuts can be made down to a minimum diameter of Φ40mm for pipe-shaped objects. ■ The tip is equipped with multiple blades, allowing for six cuts to be made in the coating at once. ■ Available in 6 cuts at 1mm intervals (25 square test) and 6 cuts at 2mm intervals (25 square test). *For more details, please refer to the PDF document or feel free to contact us.
- Company：オールグッド
- Price：10,000 yen-100,000 yen
Pendulum hardness tester
No human errors occur! A more efficient pendulum hardness test can be conducted.
The "Pendulum Hardness Tester" is a testing machine used to evaluate the hardness of coating surfaces. The evaluation of surface hardness is conducted based on the number of swings and the duration of swinging. It is equipped with an automatic lifting protective cover that completely encloses the device, preventing even slight winds that could affect the pendulum test, thus maintaining the stability of the pendulum. Additionally, it features a built-in sensor that accurately measures the level, and it allows for the monitoring of temperature and humidity during testing. 【Features】 ■ No human error occurs ■ Provides a stable testing environment ■ Equipped with an automatic lifting protective cover that completely encloses the device ■ Prevents even slight winds that could affect the pendulum test ■ Maintains the stability of the pendulum *For more details, please refer to the related link page or feel free to contact us.
- Company：オールグッド
- Price：Other
Measurable even in areas where heavy machinery cannot enter! "Simple Bearing Capacity Tester Caspol"
Reduce testing costs! No reaction force required, easy operation, and real-time evaluation of ground bearing capacity characteristics! (NETIS registered product)
The "Simple Support Strength Measuring Device Caspol" is a tripod-type measuring instrument that can evaluate the support strength characteristics of the ground in real-time. It features simple and easy operation, minimizes individual errors, and does not require reaction force, making it applicable in narrow spaces and mountainous areas. The measurement principle involves dropping a rammer equipped with an accelerometer onto the ground and calculating the strength constants necessary for the foundation support strength of structures from the maximum impact acceleration obtained from the collision. This single device can measure K30, qc, CBR, c, and φ (converted values from impact acceleration). 【Features】 ● No reaction force is required for loading, allowing for low-cost measurement of various parameters. ● Usable in sites where heavy machinery cannot enter, improving construction management quality. ● Measurement is quick and does not take much time. ● Compact and lightweight, easy to operate, and suitable for any tester. ● Powered by batteries, enabling field measurements without worrying about power supply. ● NETIS registered product: NO.KK-980055-V ● Can calculate the "allowable support strength of the ground" using measurement constants. (→ The calculation method is explained on the Marui website: http://www.marui-group.co.jp/support/caspfol.html)
- Company：マルイ
- Price：Other
Building materials B-type freeze-thaw testing machine
A two-layer structure of the test chamber and water tank with low heat and power loss.
This is a "Gas Phase Freezing and Water Melting (Method B)" testing machine for building materials such as slate, siding, gypsum board, and paint. By stacking the test chamber and water tank vertically, it features an energy-saving design that reduces thermal loss during the "melting phase" of the constant temperature water circulation and the pump power required for water circulation. Additionally, the water tank lid opens from the top for easy maintenance and also serves as a step stool, making it practical. Other considerations for maintenance include an external fan motor for cold air circulation. 【Features】 ● During "Water Melting": Unique upper and lower dual-chamber structure allows constant temperature water to circulate just below the test chamber, eliminating thermal loss. ● During "Gas Phase Freezing": Warm water naturally falls back from the test chamber to the water tank, reducing energy consumption for circulation. ● Easy operation with a touch panel. ● Peace of mind with a self-diagnosis function in case of trouble. ● User-friendly design that considers maintenance. ● Direct circulation structure achieves stable temperature distribution.
- Company：マルイ
- Price：Other
Fast testing with 4 simultaneous loads! 'Soil Automatic Triaxial Compression Testing Machine High Multi'
Achieving automation of the triaxial compression test for soil! Significant improvement in operational efficiency!
The "High Multi" is a groundbreaking triaxial testing machine that can test four specimens at once, achieving four times the testing efficiency compared to conventional single-series machines. It can reduce not only testing time but also running costs to one-fourth. Additionally, its compact design, with four interconnected cells, minimizes the installation area of the equipment, allowing for effective use of laboratory space. The operation can be fully automated from a computer, controlling the entire process of the soil triaxial compression test, including "supply of side fluid, application of back pressure and cell pressure, consolidation, and axial compression." This enables unattended testing at night, significantly improving operational efficiency. Furthermore, it eliminates individual errors in test results, enhancing the reliability of the data. 【Features】 ● Simplified handling due to standardized operating procedures ● Unattended testing possible from the consolidation process to the end of axial compression ● Multi-cell loading can be compressed in the same location as consolidation testing ● Nighttime testing can be conducted unattended, reducing testing time and costs ● Usable by non-experts, making it a rational choice regardless of the tester
- Company：マルイ
- Price：Other
![1000 kN Manual Compression Testing Machine [Can be used without power!]](https://image.www.ipros.com/public/product/image/fe8/2000182783/IPROS2107373932219657905.jpg?w=280&h=280)
1000 kN Manual Compression Testing Machine [Can be used without power!]
Ideal for use in remote mountainous areas without power! Manual hydraulic concrete compression testing machine.
This is a compression testing machine for specimens such as concrete, which applies load using a manual hydraulic method and measures compressive strength with a Bourdon tube pressure gauge. It does not require a power source or pressure equipment for testing operations, and its relatively lightweight and portable design makes it suitable for use in remote areas without electricity. A bending test device can also be attached.
- Company：マルイ
- Price：Other
Standard Type Neutralization Promotion Testing Device
Neutralization test of concrete specimens! Unique structure with no airflow bias!
This is a testing device that maintains a constant temperature, humidity, and CO₂ concentration in the chamber to promote the carbonation of concrete specimens. It has a structure that prevents airflow bias, ensuring a stable testing environment at any location within the test chamber. Additionally, it also minimizes the consumption of CO₂ gas.
- Company：マルイ
- Price：Other
Small Neutralization Promotion Test Device
Neutralization test of concrete specimens! Unique structure with no airflow bias!
This is a testing device that maintains a constant temperature, humidity, and CO₂ concentration within the chamber to promote the carbonation of concrete specimens. It features a structure that prevents airflow bias, ensuring a stable testing environment at any location within the test chamber. Additionally, it minimizes CO₂ gas consumption. 【Features】 ● Achieves stable temperature, humidity, and CO₂ distribution at any position within the test chamber ● The door is designed with a double special packing to prevent CO₂ leakage and features a safety automatic locking mechanism ● The interior of the chamber is made entirely of stainless steel, eliminating corrosion issues.
- Company：マルイ
- Price：Other
Reduce the hassle of setting up test specimens! "200kN Panel Bending Test Machine"
You can set up the test specimen with a forklift from the front, reducing the effort required for test preparation! PC-controlled!
This is a device for measuring the bending strength of materials such as ALC and construction panels. Since there is no frame at the bottom of the testing machine, test specimens can be set up from the front using a forklift, reducing the preparation time for testing. It allows for load control, displacement control, and repetitive control testing via computer. 【Features】 ● Load control, displacement control, and repetitive control can be performed from a computer. ● The unique measurement structure eliminates the frame at the bottom of the testing machine, allowing test specimens to be set from the front using a forklift. ● The spacing between supports is approximately 3800 mm, allowing for movement of the load axis. ● It can conduct panel bending tests, truss tests, beam joint tests, and more. ● Complies with JIS A 1414 standards. ● Compatible with various sizes of test specimens: ・W 3000 × D 2000 × H 250 mm (panel test) ・W 3640 × D 100 × H 1300 mm (truss test) ・W 3000 × D 80 × H 320 mm (beam joint test) ・W 2000 mm (cantilever beam joint test)
- Company：マルイ
- Price：Other
Servo motor type "100kN in-plane shear testing machine"
Precision stroke control is possible with a servo motor system! Consideration has also been given to the ease of setting up the test specimen!
Measures the in-plane shear strength and in-plane shear stiffness of structural frame components such as building panels and wooden structures. Equipped with a mechanism for conducting repeated tests and failure tests during positive and negative deformation angles under automatic control. Data collection and analysis can be performed via computer control. 【Features】 ● Precise stroke control is possible with a servo motor system ● Actuator height can be adjusted with a manual winch, reducing the effort required for specimen setup ● The chain block at the top of the frame supports the specimen setup ● High-rigidity fixtures suppress out-of-plane deformation of the specimen
- Company：マルイ
- Price：Other
Infrared panel irradiation sprinkler testing device
High-precision temperature control is possible with a closed type! No irradiation unevenness with unique irradiation zone division!
This is a heat deformation and weather resistance testing device for building boards. By combining irradiation and sprinkling, it is possible to investigate the effects of sunlight and rain. Since it is a closed type using insulation materials, highly accurate temperature control tests can be conducted. 【Features】 ● The infrared lamps are controlled by a unique zone division, eliminating irradiation and temperature unevenness based on the position of the test specimen. ● Infrared irradiation can be controlled based on the surface temperature of the test specimen. ● Settings for conditions, test duration, temperature, etc., can be easily operated via a touch panel. ● Equipped with a self-diagnosis function for peace of mind in case of any troubles. ● Sprinkling temperature can also be adjusted (optional).
- Company：マルイ
- Price：Other
No leftover penetration with a unique mechanism! "Automatic Soil Compaction Testing Machine"
With the unique movement of the mold receiving base, there is no protrusion!
This is a device that automatically compacts soil that has passed through a 37.5mm sieve as specified in JIS A 1210, in order to determine the "dry density - moisture content curve," "maximum dry density," and "optimal moisture content." With its unique mold receiving platform movement, there is no residual compaction, and the powerful arm mechanism of the W pulley ensures consistent results. Additionally, the interlocking of the drop mechanism and the mold receiving platform enables high-speed compaction, reducing testing time. 【Features】 ● No residual compaction due to the unique movement of the mold receiving platform ● Compaction of φ100mm and φ150mm without pulley replacement (lever switch) ● Consistent results with the powerful arm mechanism of the W pulley ● High-speed compaction achieved with the interlocking drop mechanism and mold receiving platform, reducing testing time ● Safety considerations with a cover installed over the drive unit
- Company：マルイ
- Price：Other
Concrete specimen end surface finishing machine "Triple Haikenma Rakuraku"
Improved usability with a norovirus prevention cleaning nozzle, a shaving amount reference plate, and a water supply filter!
The definitive version of the specimen end face finishing machine, "Triple Haiken Matsuru Tsuru Tsuru," has evolved even further! Until now, it featured: - Simultaneous grinding of three specimens, cutting manpower, working time, and installation space by one-third - One-touch specimen fixation with lever opening and closing - Various bases to accommodate different sizes of specimens - Thorough quality control with flatness measurement inspection conducted during test grinding at the time of product shipment While maintaining these features, we have added: - Sludge countermeasure function (reducing sludge adhesion generated during grinding with a cleaning nozzle) - Shaving amount reference plate (converting grinding time into approximate shaving amount) - Water supply filter (preventing clogging when using industrial water) These improvements make it even easier to use and further enhance the efficiency of testing operations!
- Company：マルイ
- Price：Other
Ultrasonic Non-Destructive Testing Device "UST"
One-touch measurement method with no individual differences in measurement!
This is a device for measuring the propagation time of ultrasonic waves, making it ideal for diagnosing the deterioration of concrete structures and for quality inspection and deterioration diagnosis of ceramic materials. It features a one-touch measurement system without adjustment knobs (just turn the switch ON), ensuring no individual differences in measurements. Additionally, the LED display makes it easy to check measurement values even in the dark, and its carrying case design makes it easy to transport.
- Company：マルイ
- Price：Other
![Field shear testing machine "LST" [Ideal for landslide prediction surveys!]](https://image.www.ipros.com/public/product/image/4ac/2000203427/IPROS176418516397945650.jpg?w=280&h=280)
Field shear testing machine "LST" [Ideal for landslide prediction surveys!]
It can be used in the field and is ideal for landslide prediction surveys!
It is a one-sided shear testing machine that can quickly and easily produce reliable data from undisturbed samples while observing the site. It can be used in the field and is ideal for landslide prediction surveys.
- Company：マルイ
- Price：Other
