Measuring Instrument Product List and Ranking from 446 Manufacturers, Suppliers and Companies | IPROS

Friction Coefficient Tester 'COF-01'

Standardized, modular, and serialized design concepts. They meet the needs of each user.

The 『COF-01』 is a friction coefficient measuring device equipped with high-speed microcomputer control, providing users with a comfortable and smooth operating experience. It uses a spacing adjustment spring with an elastic coefficient of 2N/cm, compliant with standard testing requirements. It is suitable for determining the static/dynamic friction coefficients of materials such as plastic films, sheets, aluminum foil, paper, paper-plastic composite films, cardboard, wooden materials, brake pads, windshield wipers, conveyor belts, tires, hair, metal, carbon rods, catheters, and artificial skin. 【Features】 ■ Uses a spacing adjustment spring with an elastic coefficient of 2N/cm, compliant with standard testing requirements ■ Capable of accurately obtaining static friction coefficients ■ Equipped with a 15-second static function that meets standard testing requirements ■ Provides users with a comfortable and smooth operating experience ■ Standardized, modular, and serialized design concept *For more details, please refer to the PDF document or feel free to contact us.

Diffusion-type hydrogen sulfide detector GHS-8AT

Continuous monitoring of hydrogen sulfide made easy.

A large display screen allows you to check concentration, temperature, battery level, etc., and includes a notification function for sensor calibration timing. The adoption of a power and recording switch enables energy saving and allows selection of the start and end of recording. It is compact and lightweight, making it suitable for various installation locations. The outer case is removable and easily replaceable. The waterproof and corrosion-resistant structure has been enhanced (IP66/67), with a design that allows it to float on water. Even with 1-minute logging, concentration and temperature data can be recorded for one month. A wide range of sensors is available to accommodate various measurement locations.

Ultrasonic In-Pipe Flow Measurement Device "KT-323P Model"

Measure the stratified flow velocity and water level in the vertical direction and convert it to flow rate! A device that allows for arbitrary setting of measurement layer thickness.

The "KT-323P model" is an ultrasonic pipe flow measurement device that utilizes high-precision broadband technology. The measurement layer thickness can be set arbitrarily. It is compact and easy to handle, and it measures the vertical stratified flow velocity and water level, converting them into flow rate. 【Features】 ■ Measures vertical stratified flow velocity and water level, converting them into flow rate ■ Measurement layer thickness can be set arbitrarily ■ Compact and easy to handle ■ High-precision broadband technology *For more details, please refer to the PDF document or feel free to contact us.

Tablet-type body surface temperature measurement device [TSP-LGTS022]

Detects body surface temperature just by standing in front of the tablet.

The voice changes depending on whether it is below or above the threshold. Since it has a mask detection feature, it will notify you with a voice alert when someone without a mask or with their nose exposed stands in front of the tablet. Images are saved on the tablet itself, so there is no need for a permanent computer or recording devices. You can connect the computer and tablet with a LAN cable only when necessary to collect image data or check logs. If linked with a computer, facial recognition can be performed, and management is possible with the included software. It can also be integrated with intercoms (like iPhones) and lamps, so it is not necessary to be near the tablet at all times.

Ultra-Low Temperature Electrical Resistance Measurement Device "HCER-100"

Supports a variety of samples! A cryogenic electrical resistance measurement device with a temperature control range of 300K to 4.2K!

It supports a variety of samples and can measure samples up to 10mm in size. The multi-stage radiation shield and three-stage vacuum chamber structure make sample exchange easy. With the push of a button, temperature control can be achieved from room temperature to ultra-low temperatures. (Temperature adjustment requires a temperature sensor and temperature controller [optional].) 【Specifications (excerpt)】 ■ Variable temperature sample stage: 10mm oxygen-free copper stage with screw-type 8 terminal block ■ Cooling mechanism (air-cooled two-stage cryostat) - Stage 1: 3.0W @60K - Stage 2: 0.1W @4.2K ■ Temperature control range: 300K to 4.2K ■ Vacuum chamber: three-stage vacuum chamber *For more details, please refer to the PDF document or feel free to contact us.

[Case Studies of Custom Machine Manufacturing] Inspection Machines and Measuring Instruments

Our detailed services that further enhance your requests are also well-received! Here are some examples of our work.

We would like to introduce examples of the "inspection machines and measuring instruments" that we manufacture. We produce DEF backlash measuring machines, screw section inspection machines, preload measuring machines, airtightness testing machines, and clearance measuring machines. We have a network that covers all aspects of machine manufacturing, including design, processing, and assembly, and we are confident in our quick response capabilities. Please feel free to consult us when you need assistance. 【Case Overview】 ■Product Achievements - DEF backlash measuring machine - Screw section inspection machine - Preload measuring machine - Airtightness testing machine - Clearance measuring machine *For more details, please refer to the PDF materials or feel free to contact us.

Measuring device solution

3D measuring machines, image measuring machines, and more! A lineup of measuring instruments that enhance the reliability of manufacturing.

We would like to introduce the measuring instruments handled by Ueno, a general trading company for industrial robots, machinery, and tools. We offer a wide range of products, including Mitutoyo's "Ultra-High Precision CNC Coordinate Measuring Machine" and Tokyo Seimitsu's "CNC Roughness Profile Measuring Machine." We have a rich lineup that you can choose from according to the conditions of your site. 【Lineup (Excerpt)】 ■ Mitutoyo - Ultra-High Precision CNC Coordinate Measuring Machine - CNC Coordinate Measuring Machine ■ Tokyo Seimitsu - Carl Zeiss CNC Coordinate Measuring Machine - Tokyo Seimitsu CNC Coordinate Measuring Machine ■ Nikon Instech - X-ray Inspection System - CT Inspection System ■ Leica Microsystems - Automatic Residual Contaminant Analysis System *For more details, please refer to the PDF document or feel free to contact us.

Water-related IoT: Water Quality Management System (Oil Concentration)

■■ Cloud service for automating water-related operations ■■

Water (drain) discharged from air compressors and air dryers contains oils such as compressor oil. Discharging drain that contains oil directly into the wastewater can cause environmental destruction and violate related laws (Water Pollution Prevention Act and Sewerage Act). Additionally, it can lead to problems such as uneven painting due to drain during air blowing, corrosion of piping, and failures of air equipment such as cylinders and solenoid valves. ■ Discharge regulation values under the Water Pollution Prevention Act: Oil concentration (n-hexane extractable substances) must be below 5 ppm. Measurement data can be viewed and managed in real-time on client devices (PCs, smartphones, tablets), which can help improve the efficiency of water quality management operations. ▶▶▶ For more details, please download the PDF ◀◀◀

Technical Data Presentation: Overview of JIS Standards JIS C 1910-1 Measuring Instruments

A suitable introductory book on magnetic fields! It explains JIS standards related to magnetic fields in a simple and easy-to-understand manner.

This document provides an overview of the "JIS Standard for Measuring Magnetic Fields Generated by Power Equipment 2 - JIS C 1910-1 Measuring Instruments." Acquiring knowledge about magnetic fields is essential for everyone involved in electrical equipment, including those in the power industry, manufacturing, research institutions, and universities. 【Downloadable Material】 - Overview of the JIS Standard for Measuring Magnetic Fields Generated by Power Equipment 2 - JIS C 1910-1 Measuring Instruments This document explains the contents of JIS C 1910-1:2017 by breaking it down into individual items. It describes the specifications for magnetic field measuring instruments required by JIS C 1910-1:2017. In particular, it provides explanations with illustrations regarding measurement uncertainty, bandwidth, and crest factor, making it easy to understand for those who are encountering JIS standards for the first time. 【Features】 ■ Learn about the "JIS Standards for Magnetic Fields" ■ Free document download ■ Practical for on-site use For more details, please download the PDF and view the brochure. Feel free to contact us through our company website.

FRP

Bathtubs, unit baths, septic tanks, playground equipment, and boats! Materials used in a wide range of fields.

We would like to introduce the material "FRP" that we use. FRP stands for Fiber Reinforced Plastics, which are plastics reinforced with fibers such as glass fibers and carbon fibers. It has excellent water resistance and waterproofing properties, and is used in a wide range of fields, including bathtubs, unit baths, septic tanks, playground equipment, and boats. It allows for free shaping and processing, resulting in lightweight and high-strength products. 【Features】 ■ Excellent water resistance and waterproofing properties ■ Possesses free shaping and processing capabilities ■ Capable of producing lightweight and high-strength products *For more details, please refer to the PDF materials or feel free to contact us.

【Demo unit available for loan!】Battery tester 'Hōbatta'

A must-see for those involved in battery maintenance! This is an easy-to-use and highly accurate battery capacity tester. Results can be saved to an SD card for reporting!

"Release Battery" is a user-friendly and highly accurate battery tester designed for those engaged in battery maintenance. It rapidly discharges deep cycle batteries (lead-acid batteries) from 12V to 48V to the cutoff voltage (10.5V for 12V) within approximately 30 to 60 minutes, accurately measuring capacity and saving the results to an SD card for reporting. Additionally, the R type can also be used as a high-current discharger (load device/load resistor) for solar power systems and Li-ion batteries. 【Features】 ■ Pressing the "START" button initiates discharge, displaying elapsed time and voltage on the screen every second, with data saved to the SD card. ■ Automatically stops discharging when the cutoff voltage is reached, which is gentle on the battery. ■ Simultaneously turns on the charging power supply when discharging stops, allowing for automatic charging (the discharge circuit is turned off. Optional). ★ Until August 31, 2019, inquiries mentioning "Ipros saw this" will receive a 【12% discount】 ★ * Demo units are available only from stock. Prior inquiry is required. * For more details, please download the PDF or feel free to contact us.

Mill Acoustic Control Measurement Device 'TYPE10003K'

Detects the grinding sound generated by the mill and converts it into an electrical signal!

The "TYPE10003K" is a device that detects the grinding noise generated by the mill, processes it, and converts it into an electrical signal with a sound level suitable for control. By adding this signal to an automatic adjustment meter, the amount of raw material supplied to the mill can be automatically controlled. 【Specifications (excerpt)】 ■Microphone: 1/2 inch electret condenser microphone ■Measurement range: 80–120dB ■Output voltage: 0–2V (0.05V/dB) ■Output current: 4–20mA (2.5mA/dB) ■Output time constant: FAST (0.2 seconds), 2 seconds, 10 seconds, etc. *For more details, please download the PDF or contact us.

Product Information from SURAGUS GmbH, Germany

Introducing SURAGUS products that provide solutions specialized in non-destructive testing.

Richmore International Co., Ltd. is the Japanese distributor for the German company SURAGUS, which develops, manufactures, and sells measurement and inspection solutions based on eddy current testing technology. This document includes the "Portable Contact Sheet Resistance Meter" manufactured by SURAGUS, as well as "Non-Contact Sheet Resistance Measurement Devices" and "Non-Contact Sheet Resistance Mapping Devices." We provide non-destructive testing solutions for composite materials such as conductive thin films and low/high conductivity boundary layers. [Contents] ■ Overview of SURAGUS ■ Product Introduction ■ Overview of the Japanese Distributor *For more details, please refer to the PDF document or feel free to contact us.

EddyCus(R) TF lab 4040SR-OT-OR-H

For non-contact measurements such as photovoltaic cells, semiconductors, and transparent static prevention boards!

The "EddyCus(R) TF lab 4040SR-OT-OR-H" is a non-contact sheet resistance and optical transmission measurement device that allows for accurate measurement of the sheet resistance (Ohm/sq), light transmittance, and reflection of conductive thin films. It features easy-to-use software for manual mapping and is used for measuring photovoltaic cells, semiconductors, and transparent static electricity prevention boards. Precise measurements of conductive thin films, self-supporting structures, and grid/wire structures are possible. 【Features】 ■ Non-contact measurement ■ Real-time measurement ■ Precise measurement ■ User-friendly software ■ Manual mapping *For more details, please refer to the PDF document or feel free to contact us.

EddyCus(R)TF lab 4040SR-A

A device suitable for measuring anisotropy such as batteries and fuel cells, as well as sheet resistance.

The "EddyCus(R)TF lab 4040 SR-A" is a non-contact sheet resistance measurement device for anisotropic testing. Manual mapping measurements can be performed using software. It is suitable for accurate measurement of both anisotropic and isotropic films. 【Features】 ■ Non-contact measurement ■ Real-time measurement ■ Manual mapping with software ■ Accurate measurement of anisotropic and isotropic films *For more details, please refer to the PDF document or feel free to contact us.

Measuring device "Adhesion Tester"

Quantifying adhesion! Our company has developed a product that allows for easy measurement of adhesion strength on-site.

The "Adhesive Strength Tester" is a simple measuring device developed to quantify adhesive strength, which was previously assessed through tactile judgment. The perception of adhesive strength varies depending on factors such as the size of the roller, the measurer, and the pressure applied by the hand. This product allows for easy measurement of adhesive strength on-site. Please use it with our "Adhesive Roller." 【Features】 ■ Quantifies adhesive strength ■ Allows for easy measurement of adhesive strength on-site ■ Compact ■ Weight: Approximately 420g *For more details, please refer to the PDF document or feel free to contact us.

Residual chlorine measuring device 'Photometer CL-2'

Stable measurement accuracy allows for the precise measurement of residual chlorine.

The "Photometer CL-2" is a digital residual chlorine measuring device equipped with highly convenient features. It can determine the residual chlorine concentration in water using the "spectrophotometric method." By using DPD Plus, it can measure free residual chlorine concentrations in the range of 0.00 to 5.00 mg/L. (When measuring total residual chlorine concentration, DPD No. 3 reagent is used in conjunction.) 【Features】 ■ Accurate and stable measurement function ■ Easy-to-read red LED display ■ Dustproof and waterproof structure *For more details, please download the PDF or feel free to contact us.

Acoustic measurement HATS "SAMAR 4500 Series"

High-resolution compatible! Headphone and earphone measurement device!

The "SAMAR 4500 Series" is a high-precision ear model (Type 4050/Type 4065/Type 4070) equipped HATS that is completely symmetrical left and right. Traditionally, overseas HATS used were mainly full-body models, but based on the opinions of acoustic experts, it was determined that a full body is unnecessary, so a 1/4 body has been established as the standard body. 【Features】 ■ HATS head shape: IEC60318-7 (60959), ITU-T Rec.P58, ANSI S3.36-1985 ■ Symmetrical left and right ear (pinna) model: IEC60268-7, JEITA RC-8140 ■ Ear simulator (coupler): IEC60318-4 (60711) ■ Expansion of applications due to the floating vibration isolation structure of the coupler ■ Compatible with wideband high-resolution (up to 80kHz) couplers *For more details, please download the PDF or feel free to contact us.

Earth Co., Ltd. Company Profile

Coordinating mold design and manufacturing! The accumulation of accurate measurement data has gained trust.

Earth Co., Ltd. conducts dimensional measurements of molded parts and pressed parts, as well as the design and manufacturing of molds for plastic molding. We offer a wide range of dimensional measurement services using tool microscopes and 3D measuring machines, accommodating everything from small lot production to large lot production. If you have any concerns or questions regarding dimensional measurement, molds, or molding, please feel free to contact us. 【Business Items】 ■ Dimensional measurement of molded parts and pressed parts ■ Measurement and creation of data for mold certification ■ Design and manufacturing of molds for plastic molding ■ Plastic molding processing *For more details, please refer to the PDF materials or feel free to contact us.

[About Dimensional Measurement] 3D Measuring Machine

Accurate evaluation is possible with XYZ three-dimensional direction measurement! We provide precise measurement values with contact methods!

Our company uses a three-dimensional measuring machine to measure the dimensions of products and parts. It is used for relatively large measurement items that cannot fit within a microscope measuring 700mm × 700mm × 600mm. It enables measurement in the XYZ three-dimensional direction and provides accurate measurement values by making contact with the measurement item. In recent years, three-dimensional dimensional evaluation, such as geometric tolerances, has also become necessary, and accurate evaluations are possible by utilizing the functions of the three-dimensional measuring device. When measuring a large number of identical shapes, such as in process capability inspections, we create measurement programs. By repeatedly measuring the same location, we achieve more precise and reliable measurements. 【Features】 ■ Used for relatively large measurement items ■ Accurate evaluation possible with XYZ three-dimensional measurements ■ Provides accurate measurement values by making contact with the measurement item ■ Measurement programs are created for measuring a large number of identical shapes ■ More precise and reliable measurements are achieved by repeatedly measuring the same location *For more details, please refer to the PDF document or feel free to contact us.

Oil consumption

By measuring the oil absorption of pigments and extender pigments (the amount needed to make them into a paste), we can understand the physical properties of pigments such as particle size, particle shape, and surface area. Toray Techno Co., Ltd. conducts oil absorption measurements in accordance with JIS standards.

Buried Cable Position Measuring Device "MPL-H11P"

Selectable frequencies suitable for exploration sites! New devices in the 'MPL Series' with improved operability and convenience.

The "MPL-H11P" is an embedded cable location measuring device equipped with remote control functionality, allowing frequency switching and output adjustment from the receiver to the transmitter. A noise measurement function has been added, enabling the selection of suitable frequencies for exploration sites. The transmitter's bar graph now allows for a more detailed confirmation of ground conditions. [Features] ■ Equipped with remote control functionality, allowing frequency switching and output adjustment from the receiver to the transmitter ■ Noise measurement function added, enabling the selection of suitable frequencies for exploration sites ■ The transmitter's bar graph allows for a more detailed confirmation of ground conditions *For more details, please refer to the PDF document or feel free to contact us.

Floodlight & Mercury Lamp Replacement 'ILLUMINA H-100/150'

High efficiency with a lamp efficiency of 140lm/W! Introducing products with power consumption of 100W and 150W.

We would like to introduce our floodlight and mercury lamp alternative, the 'ILLUMINA H-100/150'. It boasts a high efficiency of 140lm/W. Its waterproof design allows for outdoor use. Additionally, it is available in both external and integrated power supply configurations, and features a lightweight design. Please feel free to contact us if you have any inquiries. 【Features】 ■ Waterproof design for outdoor use ■ Lightweight design ■ Available in both external and integrated power supply configurations *For more details, please refer to the PDF document or feel free to contact us.

[Semiconductor and Medical Valves] New Method: Burr-Free Processing Technology for Chemical-Resistant Valves

Established burr-free processing for difficult-to-work materials such as engineering plastics, super engineering plastics, and high GF/CF content materials and molded products! Achieved secure flow paths for valve products!

We have established a burr-free processing technology (new method) for chemical-resistant valves while responding to the high precision requirements of difficult-to-process materials such as engineering plastics, super engineering plastics, and GF/CF high-content materials and molded products. In valve products for semiconductors and medical applications, burrs tend to occur at the junctions of holes, making them difficult to remove due to their occurrence in deep areas. However, through the development of cutting tools and optimization of processing conditions, we have established burr-free processing for the junctions of valve inner diameters. The content is designed to be easily referenced during consideration of implementation. Please feel free to download and take a look. [Contents] ■ Establishment of burr-free processing technology for chemical-resistant valves - Challenges ■ Cutting technology for ultra-hard materials of thermoplastic resins - Challenges - Technology *For more details, please refer to the PDF document or feel free to contact us.

Tōbi Trading Co., Ltd. Company Profile

We support the creation of a comfortable "building and office environment."

Tōbi Shōji Co., Ltd. is a company that primarily sells environmental measurement equipment in accordance with the Building Management Act and office sanitation standards, providing devices and commercial equipment that contribute to the safety and comfort of building facilities. Our company handles a wide range of products related to various (environmental) measurement devices and the maintenance and management of buildings, in accordance with the "Law on Ensuring Sanitary Environments in Buildings" and the "Office Sanitation Standards Regulations." 【Business Activities】 ■ Environmental measurement equipment ■ Environmental beautification products ■ Office environment-related products ■ Insurance agency for property and life insurance *For more details, please refer to the PDF materials or feel free to contact us.

Measuring instrument "DSA700S"

Equipped with a long-term measurement mode of up to 2 weeks! A measuring instrument for CATV installation work.

We handle the measurement device 'DSA700S' used for CATV installation work. Simple operation is achieved with buttons assigned for "Single Channel," "Scan Measurement," "Tilt Measurement," and "BS/CS Measurement." With high-response operation and high-speed measurement, it accelerates measurement work in the field. 【Features】 ■ Long-term measurement mode capable of up to 2 weeks ■ Firmware update function via the internet ■ Smooth operation with a click dial encoder (used for channel up/down and item selection, etc.) *For more details, please download the PDF or contact us.

Rental & Lease: Electric Tools, Metal Processing, Measuring Instruments Catalog

Featuring a wide range of products such as "electric drills" and "Atla Ace"!

This catalog introduces electric tools, metal processing equipment, and measuring instruments rented and leased by Onoden Lease Co., Ltd. It features a wide lineup including "electric drills and impact wrenches," as well as "electric hydraulic punchers" and "torque wrenches." You can rent and lease "what you need, when you need it, for the duration you need." Please feel free to consult us. 【Contents】 ■ Electric drills, impact wrenches, cutting machines, reciprocating saws ■ Atla Ace, low-profile Atla Ace ■ Electric hydraulic punchers ■ Torque wrenches, shear wrenches, building first, axial force gauges *For more details, please refer to the PDF document or feel free to contact us.

Neuroelectrochemical research system

Fast-scan cyclic voltammetry (FSCV) is an electrochemical technique that has become widespread over the past few decades.

Fast-scan cyclic voltammetry (FSCV) is an electrochemical technique that has become widespread over the past few decades. FSCV is used for analytical measurements in dynamic environments. Pine Research, Inc. is the only manufacturer that handles FSCV systems.

Three-dimensional magnetic field measurement device

The rotational angle resolution can be measured with high precision at 262,144 ppr (2^18)!

The "3D Magnetic Field Measurement Device" measures the magnetic field distribution of a circular magnetic field generating object as a magnetic field in one direction along the Z-axis. It drives the measurement probe to specified points, acquires data along with coordinate information, and analyzes and displays the data. The measurement resolution is set to a minimum of 10 micrometers, allowing for precise position measurements. Using a reference magnet for origin adjustment, the magnetic field peak is set at the measurement origin, enabling measurements with higher accuracy compared to methods based on general mechanical dimensions. 【Features】 ■ An analog monitor for the gaussmeter uses a 16-bit AD converter, allowing for optional averaging (1 to 3 times) during sampling, making it less susceptible to noise. ■ The gap adjustment between the workpiece and the sensor is also automatically set, resulting in a highly reproducible system. ■ A magnetic field distribution analysis application data analyzer is included, allowing for the assessment of various standards. *For more details, please refer to the PDF document or feel free to contact us.

Strengthening Quality Control of Diagnostic Rails *White Paper Provided

Since it can detect fine defects such as seams and cracks, the quality of products and services improves.

Strengthening quality management is a crucial element for improving the quality of products and services. The high-precision measurement capabilities provided by "Shin-Rail" enable the measurement of rail distortions, dimensional analysis of rail joints, and condition checks of the rails. This significantly enhances the quality management process, improving product reliability and customer satisfaction. Strengthening quality management not only increases product reliability but also reinforces a company's market competitiveness, serving as an important factor for sustainable business growth. *For more details, please refer to the PDF document or feel free to contact us.*