Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 05, 2025～Dec 02, 2025
This ranking is based on the number of page views on our site.
826～840 item / All 897 items
Seismic resistance with allowable strain of 4% or more without an in-core.
No core required. There is no need to disassemble the joint or perform any processing before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.
Seismic resistance with allowable strain of 4% or more without an in-core.
No core required. There is no need to disassemble the joint or perform any processing before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.
No need for electric fusion, easy installation with just one wrench! Thanks to the mechanical method, installation can be done anywhere, including wet areas!
The Suppon MPX is a fitting that allows for the connection of polyethylene pipes for water distribution without the need for in-core or disassembly. Since it can be connected using mechanical methods, there is no need for electric fusion work, and it can be installed with just one wrench, allowing for immediate water flow. Because electric fusion work is not required, it can be easily installed in areas where spring water or similar conditions may occur, making it versatile for various locations. With a wide range of options available for connecting different types of pipes, it is ideal for all kinds of sites.
Significant reduction in construction time is possible with mechanical construction methods! No electric fusion work required, making it easy to install joints in wet areas and tight spaces!
SKX is the industry's first joint that does not require disassembly and can be installed using a short wrench. It is ideal for connecting to existing pipes in renovation work for buildings such as apartments. The connection of high-density polyethylene pipes is a mechanical connection rather than a fusion connection, significantly reducing installation time. Since it can be installed with fewer tools, total costs can also be reduced. Water can be run immediately after connection. The low tightening torque allows for installation with short tools like a short wrench, enabling time savings and installation in tight spaces. It can also be installed in sites with water accumulation, such as spring water, as electric fusion work is not required. There is also a rich lineup of products including diameter-differing sockets, elbows, tees, male-threaded sockets, and female-threaded sockets.
A mechanical joint that connects coated steel pipes and high-density polyethylene pipes (ISO outer diameter)! Since coating removal and fusion work are unnecessary for joining, it reduces construction time!
No disassembly required for connection! Introducing the "Suppon Joint" series, a mechanical joint method that simply requires insertion and tightening! The product we are introducing this time is the "Suppon MPX MP-D." It is a joint that connects high-density polyethylene pipes with internally and externally coated steel pipes (VD pipes and PD pipes). The Suppon MD Joint is characterized by its ability to be installed without removing the outer coating of the internally and externally coated steel pipes (VD pipes and PD pipes). It can be joined without disassembly, and installation can be done with just a torque wrench, making it extremely user-friendly. Since the connection of high-density polyethylene pipes is a mechanical connection rather than a fusion connection, it can be installed in wet areas and connected to existing pipes. Additionally, the installation is simple, requiring only the tightening of bolts and nuts with a wrench, eliminating the need for a fusion machine. It can also slide along the pipe, making it easy to connect existing and new pipes. Water can flow immediately after connection, significantly reducing installation time. When using new high-density polyethylene pipes for renovation work, you can utilize this joint for connections with existing PD and VD pipes. Please give it a try when connecting dissimilar pipes of internally and externally coated steel pipes and high-density polyethylene pipes.
A mechanical joint that connects coated steel pipes and sewage polyethylene pipes! It allows for joining without the need for coating removal or fusion work, thus reducing construction time!
No disassembly required for connection! Introducing the "Suppon Joint" series, a mechanical joint method that only requires insertion and tightening! The product we are introducing this time is the "Suppon MPX MP-D." It is a joint that can connect polyethylene pipes for sewage with internally and externally coated steel pipes (VD pipes and PD pipes). The Suppon MD Joint is characterized by its ability to be installed without removing the outer coating of the internally and externally coated steel pipes (VD pipes and PD pipes). It can be joined without disassembly, and installation can be done with just a torque wrench, making it extremely user-friendly. Since the connection of sewage polyethylene pipes is a mechanical connection rather than a fusion connection, it can be installed in wet areas and connected to existing pipes. Additionally, the installation is simple, requiring only the tightening of bolts and nuts with a wrench, eliminating the need for a fusion machine. It can also slide along the pipe, making it easy to connect existing and new pipes. Once connected, water can flow immediately, significantly reducing construction time. Please give it a try when connecting dissimilar pipes of internally and externally coated steel pipes and polyethylene pipes for sewage.
Switching pipe types with flange-less connection of steel pipes and high-density polyethylene pipes! No flange processing or welding work required for steel pipes, simplifying construction and reducing costs!
No need for disassembly, easy connection! Introducing the "Suppon Joint" series of mechanical joint methods! The "Suppon MPX MP-V" joint is useful when switching from high-density polyethylene pipes (ISO outer diameter) to steel pipes. On the high-density polyethylene side, there is no need for an in-core, disassembly, or electric fusion work, allowing for smooth construction operations. Since there is no cooling time, water can be passed through immediately, significantly reducing construction time. Additionally, on the steel pipe side, mechanical joining eliminates the need for threading or flange welding. Construction can begin immediately after cutting the steel pipe. Since the pipe type switching section does not involve flange connections, the risk of leakage from the flange area is reduced, enhancing safety in terms of earthquake resistance and other factors. It is also possible to slide along the pipe, making it easy to connect existing and newly installed pipes. This can be utilized for repairs or renovations of aging piping systems at the connection points with existing pipes. If removal is necessary, it can be easily done by simply loosening the installed bolts and nuts. Please give it a try when connecting dissimilar pipes between high-density polyethylene pipes (ISO outer diameter) and steel pipes.
Convert high-density polyethylene pipes (ISO outer diameter) to high-density polyethylene pipes with JIS outer diameter! A mechanical joint that solves on-site "troubles"!
No disassembly required, easy connection! Introducing the "Suppon Joint" series of mechanical joints! The Suppon MPX is a mechanical joint that allows for pipe connection simply by inserting and tightening high-density polyethylene pipes (ISO outer diameter). It eliminates the need for in-core, disassembly, and electric fusion work, enabling smooth construction operations. One of its lineup, the "Suppon MPX MP-V (for JIS-P)," is a joint that can connect high-density polyethylene pipes (ISO outer diameter) with JIS outer diameter polyethylene pipes. For example, if you encounter a situation where "the high-density polyethylene pipe you prepared and the existing pipe installed are of different standards," this product allows you to convert and connect them at the joint. You can also slide it along the pipe, making it easy to connect existing and newly installed pipes. It can be utilized at the connection points during repairs or renovations of aging piping. Please give it a try when switching between high-density polyethylene pipes (ISO outer diameter) and high-density polyethylene pipes (JIS outer diameter).
High-density polyethylene pipes can be connected to cast iron pipes with just one joint! A mechanical joint that allows easy connection to existing pipes without disassembly through slide joining!
No disassembly required for connection! Introducing the "Suppon Joint" series of mechanical connection methods! The Suppon MPX is a mechanical joint that allows for pipe connection simply by inserting and tightening high-density polyethylene pipes (ISO outer diameter). It eliminates the need for an in-core, disassembly, and electric fusion work, enabling smooth construction operations. The product we are introducing this time is the "Suppon MPX MP-D." It is a joint that allows for switching from high-density polyethylene pipes (ISO outer diameter) to cast iron pipes. It is compatible with cast iron pipes ranging from φ75mm to 150mm. During the joining of cast iron pipes, no disassembly is required, and no lubricant or insertion machine is needed; you can simply insert the pipe and tighten the bolts and nuts for construction. It is also possible to slide along the pipe, making it easy to connect existing pipes with newly installed ones. This can be utilized for repairs or renovations of aging piping, particularly at the junctions with existing pipes. If removal is necessary, it can be easily detached by loosening the installed bolts and nuts. Please give it a try when connecting different types of pipes, such as high-density polyethylene pipes (ISO outer diameter) and cast iron pipes.
Connection can be made without fusion work or coating removal work, reducing construction time! A mechanical joint that allows flange-less connection of high-density polyethylene pipes and internally and externally coated steel pipes!
No disassembly required, easy to connect! Introducing the "Suppon Joint" series of mechanical joints! The product we are introducing is the "Suppon MPX MP-D." It is a mechanical joint for connecting different types of pipes, allowing for a switch from high-density polyethylene pipes (ISO outer diameter) to internally and externally coated steel pipes (VD pipes and PD pipes). On the high-density polyethylene pipe side, it features a mechanical joint that requires no in-core or disassembly for connection. There is no need for electric fusion work or preparation of fusion equipment. On the internally and externally coated steel pipe side (VD pipes and PD pipes), there is no need for special tasks such as threading or coating removal. The mechanical method simply involves inserting and tightening into the joint socket, significantly reducing the time required for connection. Additionally, since the pipe type switching section is flange-less, the risk of water leakage from the flange area is minimized, enhancing safety aspects such as earthquake resistance. It can slide along the pipe, making it easy to connect existing pipes with new ones. During renovation work, such as replacing buried coated steel pipes in facility exteriors with new high-density polyethylene pipes, it can be utilized at the pipe type switching points with existing pipes. When connecting different types of pipes, such as high-density polyethylene pipes (ISO outer diameter) and internally and externally coated steel pipes (VD pipes and PD pipes), please give it a try!
No need for fusion work or in-core insertion work! High-density polyethylene pipes can be connected to water supply polyethylene pipes with a single fitting!!
SKX is the industry's first hybrid pipe fitting that does not require disassembly and can be installed with a short wrench, making it ideal for switching between existing and new pipes during renovations in buildings such as apartments. The product we are introducing this time is the "SKX Socket for High-Density Polyethylene Pipe (JIS) for Water Supply × Polyethylene Pipe for Municipal Roads." It is a fitting that allows for easy connection between high-density polyethylene pipes (JIS) for water supply and polyethylene pipes for municipal use using a mechanical method. Since the connection for high-density polyethylene pipes (JIS) is a mechanical connection rather than a fusion connection, it can be installed in wet areas and connected to existing pipes. Additionally, it significantly reduces construction time, allowing for immediate water flow after connection. For connecting municipal polyethylene pipes, there is no need for core drilling, and installation can be done immediately after cutting the pipe. The SKX is a through-type fitting, allowing for easy installation and connection from existing pipes. Furthermore, it requires low tightening torque, enabling installation with short tools like a short wrench, which facilitates time savings and installation in narrow spaces. Disassembly is possible simply by loosening with a tool. With a rich lineup of fittings such as diameter-different sockets, elbows, and male-threaded sockets, it accommodates various connections for hybrid pipe connections.
"Connecting thoughts, changing the flow" – possibilities expand from just one joint!
The fittings mainly referred to as elbows serve the purpose of changing the direction of fluid (gas or liquid) flow. Depending on the usage, they are classified into three types based on the angle of bend: 45°, 90°, and 180°. Additionally, fittings known as tees and wyes have the function of branching or merging the flow of fluid. Nipples and sockets are used to connect fittings of the same diameter or to extend lengths, while reducers and bushings connect fittings of different diameters, allowing for the expansion or reduction of pipe size. Fittings such as caps and plugs function to stop the flow of fluid by sealing the ends of pipes. Fittings also have other roles, such as transmitting mechanical power and absorbing vibrations or thermal expansion.
Using couplings for the connection of pressure piping reduces the risk of disconnection due to insufficient bolt tightening.
Significantly reduce the risk of disconnection! We mitigate the risk of piping coming loose from the Atoms coupling due to insufficient bolt tightening. *For those interested, we also provide access to "tensile test data," so please feel free to contact us. 【Features】 ■ Simple installation by just tightening the bolts. ■ Strongly supported by joint fittings with a thickness of 6mm (*1) and angle pieces. ■ The joint fitting bolts use high-strength bolts with a strength classification of 10.9 (*2), allowing for tightening at high torque values. *1. For sizes 20A to 32A, the thickness is 4.5mm. *2. Galvanized products are equivalent to 8.8. *For more details, please refer to the PDF materials or feel free to contact us.
We can accommodate various rubber materials and flange standards. Please consult with us.
This product is a synthetic rubber spherical vibration isolator from the flexible joint (synthetic rubber vibration isolator) series. Standard product comes with JIS 10K flange (SS400). It can be changed to various standard flanges such as JIS 5K, JIS 20K, drinking water, ANSI, etc. A flat inner surface type is also available. 【Features】 ■ Excellent vibration isolation performance ■ Made of EPDM ■ Compliant with Ministry of Land, Infrastructure, Transport and Tourism specifications ■ Compliant with the standards of the Society of Air Conditioning and Sanitary Engineering ■ Uses rubber compliant with JIS K 6353 *For more details, please refer to the PDF document or feel free to contact us.
For piping connections in renovation work, we use fire-free coupling joints. We have various repair clamps available that can be used for continuous water flow to prevent fluid leakage.
The Atom's coupling is a mechanical pipe joint that excels in strength and workability, making it a reliable choice for piping such as SGP, SUS, and pipes with similar outer diameters, while also being labor-saving and cost-effective. 【Features】 ■ Can be installed with just one torque wrench ■ Easy on-site installation ■ Lighter than flange connections ■ No secondary processing of pipes required ■ Prefabrication is possible ■ Reduces total costs ■ Can be installed in small spaces ■ Can absorb angular misalignment ■ Shortens installation time
