Fittings Product List and Ranking from 45 Manufacturers, Suppliers and Companies

High Flow Energy-Saving Type Fitting 【SPE Type】

Energy-saving and cost-reducing piping fittings!!

This is a fitting that contributes to energy conservation in equipment for maximum effect with minimal energy. It smoothly accommodates piping for air, pure water, lubricating oil, and more! It is a fitting that dramatically improves work efficiency. ◎Features◎ The various plant fittings (Quick Coupling CSPE Series) have successfully achieved large flow rates through fluid analysis simulations, significantly enhancing flow performance. This reduces the time for fluid transfer and contributes to increased productivity. ● Understanding the resistance generation situation of each component and implementing loss reduction measures. ● Newly designed components to achieve large flow rates. ● Improved sealing method, successfully enhancing sealing performance (reducing damage) and dramatically increasing durability.

Company：長堀工業
Price：Other

Piping and electrical wiring materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Injection molding cooling connector - high flow energy-saving type [SPE type]

The durability of the packing has dramatically improved! It is a high-efficiency, high-flow fitting.

We reviewed the structure that sealed while crushing the packing with a newly designed parts configuration, successfully reducing damage to the packing. ◆ For details, please refer to the catalog available for download ◆ 【Product Details】 ■ High flow rate and economical! Dramatically contributes to production efficiency ★ Efficient high flow rate → Achieved a maximum flow rate of 200% compared to our products (comparison of CSPE06 to CSP06) ■ Improved cooling efficiency for injection molding ■ Contributes to energy saving of equipment for maximum effect with minimal energy ■ Revolutionary reduction of resistance loss. An evolved joint that has mastered fluid analysis of the internal structure - Grasped the resistance generation situation of each component and implemented loss reduction measures ■ Dramatically improved alignment performance through seal method enhancement - Transitioned the sealing method from pressure sealing to shaft sealing.

Company：長堀工業
Price：Other

Piping and electrical wiring materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

S-joint brass product "Fitting for resin"

It is nickel-plated! The joint has sufficient corrosion resistance and is aesthetically beautiful.

The "resin joint" requires no processing on the pipe section due to its connection relying on a ring (like an abacus bead). Tightening is achieved through a connection with a bag nut, so no special tools, flames, or adhesives are necessary. After use, it can be easily removed and reattached for inspection or redesign. Its small outer diameter and lightweight design allow for minimal space usage. 【Features】 ○ Usable with oil, water, air, etc. ○ Can be used with any fluid that does not corrode copper or brass. ○ The pressure is supported by the internal pressure, allowing the ring to fully adhere to the pipe, withstanding considerable pressure (2.94 MPa) (for resin pipes, up to 0.97 MPa). ○ The temperature range for use is -45 to 150°C for copper pipes and 0 to 60°C for resin pipes. For more details, please contact us or download the catalog.

Company：三興マテリアルサプライ
Price：Other

Piping materials (plastic pipes)
Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

S-joint Brass Product "Ring Sleeve MV"

Small and lightweight outer diameter dimensions! Ring-type fittings for copper pipes and resin pipes.

The "Ring Sleeve MV" requires no processing of the pipe section due to its connection using rings (soroban beads). Tightening is achieved through a connection with a bag nut, eliminating the need for special tools, fire, or adhesives. After use, it can be easily removed and reattached for inspection or redecoration. The fittings are nickel-plated, providing sufficient corrosion resistance and an aesthetically pleasing appearance. 【Features】 ○ Usable with oil, water, air, etc. ○ Can be used with any fluid that does not corrode copper or brass. ○ Due to the internal pressure, the ring completely adheres to the pipe, allowing it to withstand considerable pressure (2.94 MPa) (for resin pipes, up to 0.97 MPa). ○ The temperature range for use is -45 to 150°C for copper pipes and 0 to 60°C for resin pipes. For more details, please contact us or download the catalog.

Company：三興マテリアルサプライ
Price：Other

Joining and fastening materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

S-joint brass product "Resin MV"

Space can be minimized! Ring-type fittings for copper pipes and resin pipes.

The "resin MV" requires no processing on the pipe section due to the connection via rings (beads). Tightening is achieved through a connection with a bag nut, so no special tools, fire, or adhesives are necessary. After use, it can be easily removed and reattached for inspection or redesign. The fittings are nickel-plated, providing sufficient corrosion resistance and an aesthetically pleasing appearance. 【Features】 ○ Usable with oil, water, air, etc. ○ Can be used with any fluid that does not corrode copper and brass ○ The pressure can withstand considerable pressure (2.94 MPa) due to the ring completely adhering to the pipe under internal pressure (for resin pipes, up to 0.97 MPa) ○ The operating temperature range is -45 to 150°C for copper pipes and 0 to 60°C for resin pipes For more details, please contact us or download the catalog.

Company：三興マテリアルサプライ
Price：Other

Joining and fastening materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

S-joint brass product "Double Ferrule MV"

Operating temperature range -45 to 150℃! Double ferrule type fitting for copper pipes.

The double ferrule type for copper pipes has a structure that supports the tube with two ferrules: a front ferrule and a back ferrule, allowing it to be used up to about 1/4 of the breaking pressure of the copper tube. We offer a wide range of products tailored to various applications, including "male connectors (tapered screw type)," "male elbow connectors (tapered screw type)," and "female connectors (tapered screw type)." 【Material】 ○ Body: JIS H3250 C3604 or C3771 ○ Nut: JIS H3250 C3604 ○ Ferrule: JIS H3250 C3604 For more details, please contact us or download the catalog.

Company：三興マテリアルサプライ
Price：Other

Joining and fastening materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

S-joint brass product "Flare MV"

Uniform tightening with no leaks! Flare type fittings with sleeves for copper pipes.

The sleeve-type flare allows for the tightening force generated by tightening the bag nut to be transmitted to the contact surface of the pipe flare section through the sleeve, preventing rotational friction (twisting) forces from acting, which enables uniform tightening without damaging the pipe flare area, resulting in a leak-free conical seal. 【Material】 ○ Body: JIS H3250 C3604 or C3771 ○ Nut: JIS H3250 C3604 ○ Sleeve: JIS H3250 C5441 For more details, please contact us or download the catalog.

Company：三興マテリアルサプライ
Price：Other

Joining and fastening materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water supply distribution polyethylene pipe × High-density polyethylene pipe for water supply, dissimilar pipe joint SKX

The connection of polyethylene pipes does not require an in-core.

There is no need for processing before disassembling the joint or inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.

Company：川西水道機器
Price：Other

Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water supply copper pipe × high-density polyethylene pipe for water supply, dissimilar pipe joint SKX

The connection of polyethylene pipes does not require an in-core.

There is no need for disassembling the joint or any pre-treatment before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

Company：川西水道機器
Price：Other

Piping materials (copper pipes, cast iron pipes)
Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Polyethylene pipes for drainage, pipe fittings, Suppon MPX

Seismic resistance with allowable strain of 4% or more without an in-core.

No core required. There is no need to disassemble the joint or perform any processing before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.

Company：川西水道機器
Price：Other

Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sewer Poly Pipe × Poly Pipe Dissimilar Pipe Joint Suppon MPX

Seismic resistance with allowable strain of 4% or more without an in-core.

No core required. There is no need for processing before disassembling the joint or inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.

Company：川西水道機器
Price：Other

Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water supply poly pipe × stainless steel dissimilar pipe fitting Suppon MPX

Seismic resistance with allowable strain of 4% or more without an in-core.

No core required. There is no need to disassemble the joint or perform any processing before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.

Company：川西水道機器
Price：Other

Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water distribution polyethylene pipe × high-density polyethylene pipe dissimilar pipe joint Suppon MPX

Seismic resistance with allowable strain of 4% or more without an in-core.

No core required. There is no need to disassemble the joint or perform any processing before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolts and nuts.

Company：川西水道機器
Price：Other

Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water supply polyethylene pipe × sewage polyethylene pipe, dissimilar pipe joint, Suppon MPX

Seismic resistance with allowable strain of 4% or more without an in-core.

No core required. There is no need to disassemble the joint or perform any processing before inserting the pipe. You can easily connect it by simply inserting the pipe and tightening the bolt and nut.

Company：川西水道機器
Price：Other

Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fittings for High-Density Polyethylene Pipes (ISO) - Suppon MPX

No need for electric fusion, easy installation with just one wrench! Thanks to the mechanical method, installation can be done anywhere, including wet areas!

The Suppon MPX is a fitting that allows for the connection of polyethylene pipes for water distribution without the need for in-core or disassembly. Since it can be connected using mechanical methods, there is no need for electric fusion work, and it can be installed with just one wrench, allowing for immediate water flow. Because electric fusion work is not required, it can be easily installed in areas where spring water or similar conditions may occur, making it versatile for various locations. With a wide range of options available for connecting different types of pipes, it is ideal for all kinds of sites.

Company：川西水道機器
Price：Other

Fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fittings Product List and Ranking from 45 Manufacturers, Suppliers and Companies

Fittings Manufacturer, Suppliers and Company Rankings

Fittings Product ranking