Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 210 items
Permanent magnet drum-type magnetic separator
Used for sorting and recovering non-ferrous metals such as aluminum from target materials. The internal magnetic poles are fixed while the SUS outer cylinder rotates. Iron pieces are attracted by the built-in magnet from the target materials flowing over the surface of the outer cylinder. Iron pieces are removed with a scraper attached to the outer cylinder.
Cased drum-type magnetic separator
Used for removing iron powder from powdered materials by incorporating a permanent magnet drum-type magnetic separator into a case.
Catch dust that cannot be visually confirmed! A dust concentration meter that ensures safety through continuous monitoring.
The dust monitor continuously measures the dust concentration in the exhaust gases on the secondary side of dust collectors and monitors changes in relative dust levels, outputting alarm contacts and analog signals in case of abnormalities. It detects the frictional static electricity of dust that comes into contact with or passes near the detection probe. It can be easily installed in existing setups and is useful for environmental measures. Additionally, it is equipped with a concentration correction function, allowing for output correction to the dust concentration obtained by JIS measurement methods by adding a correction factor to the detection signal. Changes in dust levels due to leaks or tears in bags can be monitored, and continuous concentration changes can be output at levels close to actual measurements, enabling trend management of dust collector performance to be monitored at values close to JIS measurement methods. Moreover, it has obtained domestic explosion-proof certification, making it usable in first and second category hazardous locations (zone 1.2). ● Domestic production ensures stable supply Maintenance only requires regular cleaning of the probe. ● Low cost with performance equivalent to optical methods Measurement range of 0 to 1000 mg/m³ with 9 range switches. Detectable particle size from 0.3 μm. ● No specialized knowledge required. Range setting and sensitivity adjustment can be easily made with a switch. For more details, please click on the related link or download the catalog.
It is possible to prevent damage to expensive conveyor belts and falling debris, thereby preventing disruptions in the transportation system caused by accidents!
The belt misalignment switch is a protective switch that detects misalignment and wandering of the belt conveyor, issuing alarm signals and emergency stop signals. It can be used to prevent damage to the belt edges and to avoid material spillage due to belt misalignment. The belt misalignment switch is essential for the safe operation of belt conveyors and is widely used in industries such as steel, cement, chemical, and thermal power plants. 【Features】 ● It is designed for outdoor use with an IP67 rating. ● The highly reliable micro switch uses maintenance-free ball bearings and a touch roller that can tilt up to 75°, ensuring a design with functional margin, so it operates reliably even in cases of abnormal belt misalignment and has a long lifespan. ● When the contacts operate, the touch roller does not reset until it returns more than 2° (hysteresis characteristic), preventing repeated opening and closing of the contacts during operation. Therefore, it can protect the belt conveyor with a simple control circuit. *For more details, please download the catalog or contact us.
We will detect vertical tearing accidents of conveyor belts early!
The belt longitudinal tear detector is a switch that instantly detects longitudinal tears in the belt caused by foreign objects penetrating the belt at the chute drop-off point of the belt conveyor and outputs an alarm signal. It consists of a sensor section that detects longitudinal tears and a converter section that outputs cutting signals. The converter is also equipped with a disconnection alarm output that detects cuts in the sensor or cable, ensuring high safety. 【Features】 ● A highly sensitive cable switch is used in the sensor section. The point that is pressed immediately becomes a contact, allowing for instant detection of abnormalities. ● The conductive part of the touch switch is protected by a safety cover, preventing dust and transported materials from adhering, and it is not affected by ozone, infrared, or other influences. ● The detector can be installed without modifying the conveyor belt itself. It can also be installed on operating conveyor lines. *For more details, please download the catalog or contact us.
Quickly resolve the confusion in the conveyor line caused by a shoot blockage!
The chute switch is a device designed to issue an alarm signal and emergency stop the belt conveyor when the chute of a belt conveyor or the chute of a tripper is blocked by transported materials. It is mounted on the side wall of the chute and operates by moving a detection plate due to the side pressure from accumulated materials such as ore. The detection plate is installed using dust-proof bearings, allowing it to move smoothly even if dust adheres to it. To prevent issues caused by condensation, a proximity switch type is also available as an option. The detection operating force can be adjusted from 9.8 N to 14.7 N at the tip of the detection plate. Therefore, the chute switch can be used across a wide range of belt conveyor lines, from small powders to bulk materials.
24-hour filter tear monitoring! Lightweight model at just 0.5 kg.
The dust switch continuously monitors the filter breakage of general-purpose small dust collectors for 24 hours. It quickly detects fine dust during abnormal conditions and alerts you to dust leakage. Similar to a dust monitor, it detects the friction charge of dust that comes into contact with the detection probe. It is an easy-to-install work environment protection switch that is ideal for detecting filter dirt and breakage, as well as for environmental measures. 【Features】 ● Easy installation on general-purpose small dust collectors ● Capable of monitoring filters ● Lightweight and compact, and can be directly integrated into PLCs For more details, please click on the related link or download the catalog.
Industry-leading detection sensitivity! Detection from a bulk density of 0.02g/cm³!
The "MVL Series" is a vibrating level switch capable of stable detection of various powders and granular materials, from fine powders to coarse particles. It is unaffected by changes in temperature, humidity, pressure, dust, or electrical properties. It is easy to adjust, has no moving parts, and boasts excellent durability. Additionally, the housing can rotate approximately 310°, making it easy to adjust the direction of the lead outlet after installation. 【Features】 ■ Detects bulk density from 0.02g/cm3 ■ Standard specifications support a maximum temperature of 150°C ■ Standard specifications use SUS316L material ■ Clearly displays the current status with two-color LEDs even when the cover is closed ■ Adopts a screw-up terminal block ■ Uses a free power supply For more details, please click on the related link or download the catalog.
Pursuing ease of use! Our unique technology prevents malfunctions even with highly adhesive measurements like slurries!
Level switch for detecting upper and lower limits in silos for powders and granules, and tanks for liquids. - No false detection even with highly adhesive slurries, liquids, and powders! - Avoids malfunction due to adhesion with a special electrode structure and control method! - Covers all sensitivities from low to high with one type of substrate, regardless of L dimension! - Easy setup with range switching and volume adjustment! - No moving parts, providing exceptional durability! 【Features】 ■ Two-color LED operation indicator Easy to distinguish between normal and detection states ■ Understand operational status even when the cover is closed Eliminates wasted time ■ Uses screw-up type terminal block Prevents loss of screws ■ Housing rotates approximately 310° Prevents rainwater intrusion ■ Uses free power supply No worries about voltage fluctuations ■ Standard support for up to 150°C For more details, please click on the related link or download the catalog.
Assisting stable operation of the production process! Equipped with enhanced durability detection blades.
We would like to introduce the application examples of the load flow detector 'EFSL-155S' handled by Matsushima Majatech. When there are no items being transported on the conveyor, there may be abnormalities in the upstream processes. Additionally, if the normal transport volume is not flowing, it could significantly impact the downstream processes. This product is suitable for monitoring the status of the conveyor transport line. Its implementation helps ensure stable operations in the production process. 【Example】 ■ Application: Monitoring the transport status of belt conveyors ■ Product introduced: Load flow detector 'EFSL-155S' *For more details, please refer to the PDF materials or feel free to contact us.
The inclinometer "CM-961A" is an inclination sensor that uses a MEMS accelerometer. It features a metal case, making it durable, and has a protection structure of IP-67.
The tilt meter detects using a MEMS accelerometer (MEMS: Micro-Electro-Mechanical Systems). Additionally, it is designed with a metal case to provide shock resistance and vibration resistance. It is compact (compared to our products). The output is available in two types: voltage output type 1-5V and current output type 4-20mA. As an additional feature, it includes a switch function. You can obtain transistor output at any desired tilt position (specified at the time of order). It has a function to correct installation errors, allowing for correction to 0° within a range of ±1°. There is a YouTube video available. Within the CM-900 series, there is also the "CM-936," which outputs a rotation angle of 360° linearly. It outputs the rotation angle from 0 to 360° as DC voltage 1-5V or current 4-20mA (specified at the time of order). For more details, please search for "CM-936" on the Ipros site. *For more information, please contact us or download the PDF document.
Available for use under various measurement conditions! There are many manufacturing specifications for wetted materials and connection standards.
The "HC-8□ Series" is a liquid-type detector used for pH/ORP measurement in closed loops such as piping and sealed tanks, featuring electrodes integrated into an electrode holder. It is available in two shapes: a case (chamber) type that connects to a bypass line via a flange, and an insertion type that connects to the side of piping or tanks using screws or flanges. To accommodate various measurement conditions, there are many options for liquid contact materials and connection standards, as well as a wide variety of combination electrodes. 【Features】 ■ Widely usable from wastewater and sewage treatment facilities to boiler systems and general process control equipment. ■ Offers internal liquid pressurization for cases with process pressure and internal liquid head pressure (sampling type) for cases without process pressure (atmospheric pressure). ■ Model selection is possible based on the connection method to the process line and the measurement conditions such as pressure, temperature, and properties of the sample water. *For more details, please refer to the PDF document or feel free to contact us.
Ultrasonic cleaning methods and brush cleaning methods, etc.! It is possible to select more effective cleaning methods.
Introducing the immersion-type pH/ORP detector with cleaning function, the "□HC-7 series." The pH and ORP electrodes are equipped with glass sensors or platinum sensors, and the sensing components such as the liquid junction and temperature compensation sensor are positioned facing downward. It allows for the selection of a more effective cleaning method suitable for the installation site. Additionally, we offer the immersion-type detector "UHC-7D," which integrates the immersion-type pH/ORP electrode holder with an ultrasonic cleaner. 【□HC-7 Series Various Cleaning Methods】 ■ Ultrasonic cleaning method ■ Brush cleaning method ■ Water jet cleaning method ■ Pulse air jet cleaning method ■ Chemical cleaning method ■ Lift-up jet cleaning method *For more details, please refer to the PDF document or feel free to contact us.
