Cylinder - メーカー・企業67社の製品一覧とランキング

更新日： 集計期間:Oct 29, 2025～Nov 25, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。

Cylinderのメーカー・企業ランキング

更新日： 集計期間:Oct 29, 2025～Nov 25, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. null/null
  2. 藤倉コンポジット Tokyo//Other construction industries
  3. レント Shizuoka//Building materials, supplies and fixtures manufacturers
  4. 4 エナパック 本社　営業部 Saitama//Building materials, supplies and fixtures manufacturers
  5. 5 LOCKMAN Tokyo//Building materials, supplies and fixtures manufacturers
企業ランキングへ

Cylinderの製品ランキング

更新日： 集計期間:Oct 29, 2025～Nov 25, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. Mobile door-type lifter / rental レント
  2. Zero friction resistance "Air Bearing Cylinder" 藤倉コンポジット
  3. Dimple Key Cylinder "Mega Cross SP Cylinder" LOCKMAN
  4. 4 Environmental Monitoring Setup Composite Environmental Sensor MES-32/MES-33: Nissin Electric
  5. 4 ABLOY Door Cylinder KYOEI Industries Co., Ltd. ABLOY Div.

Cylinderの製品一覧

46～60 件を表示 ／ 全 301 件

表示件数
[Information] Regarding the Use of Swing Clamp Accessory Arm

[Information] Regarding the Use of Swing Clamp Accessory Arm

Arm length of the CAL/CAS series: Clamping force: Graphs of maximum flow rate relationships, etc. are included!

The swing clamp's maximum flow rate per clamp cylinder is determined by the length of the arm used, and the intersection of the arm length and curve represents the clamping force. When determining the clamping force, please adjust the arm length within the allowable clamping force and be careful not to damage the plunger rod during installation. This document includes information on the optional long arm "CAL series" and the optional standard arm "CAS series," featuring graphs of "Arm Length: Clamping Force: Maximum Flow Rate Relationship" and "Dimension Diagrams for Mounting Parts When Fabricating Arms." Please take a look. [Contents] ■ Arm Length: Clamping Force: Maximum Flow Rate Relationship Graph ■ Clamping Arm Dimension Table ■ Dimension Table for Arm Fabrication ■ Example of Usage Conditions for the 5kN Series ■ Dimension Diagram for Mounting Parts When Fabricating Arms *For more details, please refer to the PDF document or feel free to contact us.

  • Work tools

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Tuned Lifting System "EVOP Series"

Tuned Lifting System "EVOP Series"

Achieving cutting-edge speed and precision! A synchronized lifting system with pumps arranged at each point.

The "EVOP Series" is a synchronized lifting system suitable for heavy-duty cylinders with capacities ranging from 3036 to 10644 kN. It is controlled by variable frequency drive (VFD) for synchronized operation, enabling smooth operation and high-precision high-speed lifting. Additionally, we offer products such as the "EVO-SC-25, stroke sensor cable, 25 meters," which can be connected and extended, and the "CLNC12 network controller." 【Features】 ■ The standard control interface allows for easy setup and a variety of lifting operations to choose from. ■ Lifting speed is eight times faster compared to similar methods. ■ The stroke difference between each cylinder during operation is less than 1.0 mm. ■ Built-in warning and stop alarms ensure maximum safety. *For more details, please refer to the PDF materials or feel free to contact us.

  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Automatic coupler

Automatic coupler

Introducing a hydraulic coupler that can be used at temperatures ranging from -40 to 100℃, with a maximum allowable flow rate of 6L/min and a maximum operating pressure of 30MPa.

We would like to introduce our "Automatic Couplers." The block-integrated models "AUC-115" and "AUN-115-PF1/4" are suitable for systems that automate the connection and disconnection of hydraulic piping, such as hydraulic cylinders. The screw-in models "L391234" and "L391235" have external threads on the coupler body, making them easy to integrate and allowing for direct attachment to manifold blocks. The specifications and connection accuracy are the same as the block-integrated models. 【Features】 ■ Block-integrated type - Suitable for systems that automate the connection and disconnection of hydraulic piping, such as hydraulic cylinders. ■ Screw-in type - Features external threads on the coupler body, making integration easy and allowing for direct attachment to manifold blocks. *For more details, please refer to the PDF document or feel free to contact us.

  • Prime movers, torque converters, hydraulic equipment, generators

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Accessories for electric hydraulic pumps

Accessories for electric hydraulic pumps

The oil level switch and temperature switch are effective for detecting the tank oil level and oil temperature!

We would like to introduce the air-cooled and water-cooled oil coolers, oil level switches, and temperature switches that we handle. When using electric pumps continuously at high pressure for extended periods or when the frequency of cylinder use is high, the operating oil temperature of the pump can rise abnormally, leading to potential failures. Therefore, please use an oil cooler to prevent the rise in oil temperature. Additionally, please select the standard models of water-cooled and air-cooled coolers for the "ZEJ series" and "PE6100 series" electric pumps. (Models with an "A" or "W" at the end of the model number) Oil level switches and temperature switches are effective for detecting tank oil levels and oil temperatures. 【Product Lineup】 ■ Air-Cooled Oil Coolers - EX-090-200V - PAC-3 ■ Water-Cooled Oil Coolers - PWC-3 - PWC-5 *For more details, please refer to the PDF materials or feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Single-acting/Dual-acting Aluminum Cylinder "RA Series"

Single-acting/Dual-acting Aluminum Cylinder "RA Series"

Withstand lateral loads up to 10% of capacity and reduce cylinder wear! Safe to use even in environments prone to rust.

The "RA Series" is a single-acting/double-acting aluminum cylinder that has a mass of about 50-60% compared to steel cylinders, making it easy to transport and install. With bearings synthesized from new materials, a floating state is formed on the sliding surface of the cylinder, allowing it to withstand lateral loads of up to 10% of its capacity, while also reducing cylinder wear. Additionally, we offer the double-acting aluminum center hole cylinder (hydraulic return) "RARH Series," which is approximately 40% lighter than steel center hole cylinders. 【Features】 ■ About 50-60% of the mass compared to steel cylinders ■ Easy to transport and install ■ Can withstand lateral loads of up to 10% of its capacity, while further reducing cylinder wear ■ The main material, aluminum alloy steel, can be safely used even in environments prone to rust *For more details, please refer to the PDF document or feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Single-acting cylinder (spring return) "RC series"

Single-acting cylinder (spring return) "RC series"

It is possible to effectively distribute eccentric loads! Prevents scoring marks on the inner surface of the cylinder and early bearing damage.

The "RC Series" is a single-acting cylinder (spring return) that incorporates a double bearing (GR2) structure into the RC DUO cylinder. The return mechanism of the cylinder uses a reinforced spring, achieving both strong tension and remarkable durability. The series includes products with capacities starting from 45kN, as well as 100kN, 142kN, 233kN, 293kN/500kN, and 718kN/933kN. 【Features】 ■ The hydraulic seal is surrounded by bearings at both ends, allowing for effective distribution of eccentric loads. ■ By reducing the burden on the hydraulic seal, durability is significantly improved compared to conventional products. ■ Prevents galling on the inner surface of the cylinder and early bearing damage caused by eccentric and dynamic loads. *For more details, please refer to the PDF document or feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Hydraulic Nut Splitter "NSH Series"

Hydraulic Nut Splitter "NSH Series"

ATEX certified! An ideal tool for removing stuck or corroded nuts.

The "NSH Series" is a hydraulic nut splitter designed to comply with BS/ANSI flange standards. The depth of nut cutting can be adjusted using the blade positioning scale to prevent damage to the bolt. It features an ergonomic design and a user-friendly handle position. The nut splitter has been certified as compliant with the 94/9/EC "ATEX Declaration" based on test results. 【Features】 ■ Designed to comply with flange standards ■ An ideal tool for removing nuts ■ Adjusts the cutting depth of the nut to prevent bolt damage ■ Cutting heads and power heads can be exchanged according to application ■ Ergonomic design and user-friendly handle position *For more details, please refer to the PDF materials or feel free to contact us.

  • others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Air-driven hydraulic torque wrench pump "LAT series"

Air-driven hydraulic torque wrench pump "LAT series"

ATEX certified to meet operational environment compliance requirements! Suitable for use in tight scaffolding and work passages.

The "LAT Series" is a hydraulic pump that can be operated solely by air in harsh work environments that require explosion-proof performance. It has a mass that can be carried by one worker and a compact shape, making it suitable for use in narrow or cramped scaffolding, work passages, pipe racks, and lifts. Additionally, the hydraulic pump with a three-piston design achieves the highest level of tightening and loosening speed, allowing for cost reduction without delaying work. 【Features】 ■ ATEX certified, meeting work environment compliance requirements ■ Mass that can be carried by one worker and a compact shape ■ Standard roll cage to protect air equipment and the pump body ■ Pendant switch operable by air with a 4.5m cord ■ Equipped with a certified 100mm calibrated gauge *For more details, please refer to the PDF document or feel free to contact us.

  • Air compressors, blowers and pumps

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Case: Arrangement of a 1,140-ton nuclear power plant module

Case: Arrangement of a 1,140-ton nuclear power plant module

Equipped with the SyncHoist system! A case where the rigging length could be easily and accurately adjusted.

South Carolina Electric & Gas Company (SCE&G) is working on an expansion project for a nuclear power plant and was tasked with installing a 2.4 million pound CA01 module. The CA01 module is not only very large and heavy, but also generally has an irregular shape, making it difficult to handle within the required tolerances, necessitating additional personnel, equipment, and time. In response, Enerpac provided the SyncHoist system, a lifting device under the hook composed of multiple specialized hydraulic cylinders. This system allowed operators to monitor and adjust each lifting point individually or in sync together with precision. *For more details, please refer to the PDF document or feel free to contact us.*

  • Prime movers, torque converters, hydraulic equipment, generators

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Case: Safely removing furnace bricks from a steel fixture.

Case: Safely removing furnace bricks from a steel fixture.

Introducing examples using the RC series hydraulic cylinders and P series hydraulic hand pumps!

Vesuvius processes bricks used inside industrial furnaces. The bricks start in a "soft" state and need to be compressed, hardened, and heated before being placed in the furnace. They are packed into a steel box for compression, which solidifies the bricks; however, after compression, the bricks stick to the steel fixtures, requiring considerable force to remove them. Therefore, a 50-ton hydraulic cylinder and a manual hand pump are used. Pressure is applied to the release rod to remove the bricks from the steel fixtures. The hydraulic system provides a quick and safe solution. [Case Overview] ■ Customer: Vesuvius (Poland) ■ Products: RC series hydraulic cylinders, P series hydraulic hand pumps ■ Result: Provided a quick and safe solution *For more details, please refer to the PDF document or feel free to contact us.

  • Prime movers, torque converters, hydraulic equipment, generators

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Case: The synchronous lift system activates the offshore oil platform.

Case: The synchronous lift system activates the offshore oil platform.

43,000-ton floating oil production system! Introducing a case where integrity was successfully maintained!

Maintaining structural integrity throughout the lift was essential not only for ensuring the safety of the lift but also for guaranteeing structural integrity and safety throughout its operational lifespan. To achieve this, we utilized Enerpac PLC-controlled 700 bar synchronized lifting technology to individually control 352 small high-pressure (700 bar) 300-ton hydraulic cylinders, which were integrated into the active skids beneath the steel structure as a group. We were able to sense and control deflection within the required range of 210 mm over a 70-meter span between the pontoon and the main superstructure, thereby protecting its integrity throughout the lifting, weighing, moving, and launching processes. [Case Overview] ■ Client: Marine and Heavy Industry in Malaysia (Johor Bahru) ■ Product: EVO Synchronized Lifting System *For more details, please refer to the PDF document or feel free to contact us.

  • Other elevators and transport systems

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Case: Pull pin for oil well casing elevator spider.

Case: Pull pin for oil well casing elevator spider.

We would like to introduce a case where we provided a hydraulic solution that pulled out the pin within 15 minutes!

All boreholes of oil wells being drilled must be covered with durable materials to prevent contamination and provide structural support during drilling. The elevator spider is used as a guide to center each casing, and the pins need to be replaced with each drilling to remove corrosion and dirt that accumulates during the process. Additionally, the existing process for removing the pins at MOISS took up to four hours and required continuous hammering. The spindle bar passes through the center of the "RCH series" hollow cylinder attached to a metal sleeve and connects to the pins of the elevator spider. The "RCH series hollow plunger hydraulic cylinder" equipped with the "P series Ultima hydraulic hand pump" provides a hydraulic solution to pull out the pins in under 15 minutes, saving the maintenance team several hours. *For more details, please refer to the PDF document or feel free to contact us.*

  • pump

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Case: The synchronous pump and high-tonnage cylinder stabilize the ship's cruising range.

Case: The synchronous pump and high-tonnage cylinder stabilize the ship's cruising range.

The body and plunger cylinder have a strong and corrosion-resistant soft nitriding finish!

To support the construction of the new Joint Support Ship (JSS), the team at Seaspan Shipyards, based in Vancouver, aimed to find a more effective way to keep the vessel level throughout the project. To move large and heavy objects effectively, safely, and accurately, precise control and synchronized movement of all lifting points are required. To achieve this, the "Enerpac EVO synchronized lifting pump" and 12 "high-capacity hydraulic lifting cylinders" were specified and supplied by the local Enerpac distributor, Hyseco. By using only one operator to control 12 lift points from a single intuitive interface, productivity and accuracy were improved, ultimately helping to maintain the structural integrity as the build progressed. *For more details, please refer to the PDF document or feel free to contact us.*

  • Other elevators and transport systems

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Case: The jack system slides the Holbrook Canal into the designated position.

Case: The jack system slides the Holbrook Canal into the designated position.

Horizontal bridge slide method! I was able to complete the slide in 52 minutes!

Minimizing the time that State Route 266 is closed was a primary objective during the reconstruction of the bridge over the Holbrook Canal. The new bridge was initially used as a detour while the defective bridge was being demolished, and once the old bridge was taken down, the new bridge needed to be slid into place at the original bridge's location. To slide the new bridge into its designated position, a lateral bridge sliding method was employed. We provided a hydraulic solution that allowed the new 44.5-foot bridge structure to be pushed into place using the lateral sliding method with PTFE slide elements. We supplied two "RR Series double-acting hydraulic cylinders," each equipped with its own unique "ZU Series hydraulic pump" and integrated pendant control. The pendant control enabled the operator to maintain individual control and manage any misalignment of the bridge structure between the abutments or recovery from wedging. *For more details, please refer to the PDF document or feel free to contact us.*

  • Prime movers, torque converters, hydraulic equipment, generators

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Case Study: Descent and Leveling of Caisson Pier Box

Case Study: Descent and Leveling of Caisson Pier Box

Each pier has two independently controlled hydraulic jacks that accurately lowered the caisson!

The existing Johnson Street Bridge, which has a history of 90 years, is located in the heart of Victoria, British Columbia, and was in the process of being replaced with a new bridge that will serve the community for the next 100 years. The 1,100-ton bascule bridge box is composed of steel and concrete caissons and needed to be precisely lowered onto 16 large piers. Therefore, we provided 32 "CLSG high-tonnage hydraulic cylinders" and 3 "EVO synchronized lift systems." All three systems are networked, allowing one operator to control all 32 points from a master control user interface. By combining the system with the bar lowering method, the company improved accuracy, productivity, and efficiency, completing the lowering and leveling of the caissons in just three business days. *For more details, please refer to the PDF document or feel free to contact us.

  • Other elevators and transport systems

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Cylinderに関連する検索キーワード

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.