List of Non-destructive testing products
- classification：Non-destructive testing
46～90 item / All 1240 items
Easily connect pipes with different outer diameters! A fitting suitable for emergency repairs of buried pipes.
- others
A pipe inspection camera system that easily reaches the areas you want to see! It uses a special bending cable and can easily pass through narrow drainage pipes with a diameter of 40mm!
- Non-destructive testing
Find people whose work and mindset do not align! It is possible to select personnel to enhance organizational productivity.
- Non-destructive testing
- Control technology for ultrasonic probe oscillation using a function generator -
- IoT
- Non-destructive testing
- Vibration and Sound Level Meter
Dynamic control technology of megahertz ultrasound - Nonlinear control technology of ultrasound using multiple function generators.
The Ultrasonic System Research Institute has developed a completely new dynamic control technology for ultrasound by utilizing multiple function generators. This technology enables the control of nonlinear ultrasonic phenomena through oscillation with several different waveforms (sweeping). Note: Nonlinear (resonance) phenomena By generating harmonics of the 10th order or higher through original oscillation control and resonating with low-frequency vibration phenomena, the generation of high-amplitude harmonics has been achieved, resulting in nonlinear (resonance) phenomena of ultrasonic vibrations. By optimizing the ultrasonic propagation characteristics of various components according to their intended purpose, efficient ultrasonic oscillation control becomes possible. Through the measurement and analysis of sound pressure data from ultrasonic testers, this system technology dynamically controls the changes in surface elastic waves according to the intended application. Ultrasonic Oscillation Control Probe Measurement and analysis range: 1 Hz to 200 MHz Oscillation range: 0.5 kHz to 25 MHz Ultrasonic propagation range: 5 kHz to over 900 MHz (analysis confirmed) Ultrasonic propagation characteristics: 1) Detection of vibration modes 2) Detection of nonlinear phenomena 3) Detection of response characteristics 4) Detection of interactions
- Application technology of the Ultrasonic System Research Institute based on ultrasonic measurement and analysis techniques -
- Scientific Calculation and Simulation Software
- Vibration and Sound Level Meter
- Non-destructive testing
Dynamic control technology of megahertz ultrasound - Nonlinear control technology of ultrasound using multiple function generators.
The Ultrasonic System Research Institute has developed a completely new dynamic control technology for ultrasound by utilizing multiple function generators. This technology enables the control of nonlinear ultrasonic phenomena through oscillation with several different waveforms (sweeping). Note: Nonlinear (resonance) phenomena By generating harmonics of the 10th order or higher through original oscillation control and resonating with low-frequency vibration phenomena, the generation of high-amplitude harmonics has been achieved, resulting in nonlinear (resonance) phenomena of ultrasonic vibrations. By optimizing the ultrasonic propagation characteristics of various components according to their intended purpose, efficient ultrasonic oscillation control becomes possible. Through the measurement and analysis of sound pressure data from ultrasonic testers, this system technology dynamically controls the changes in surface elastic waves according to the intended application. Ultrasonic Oscillation Control Probe Measurement and analysis range: 1 Hz to 200 MHz Oscillation range: 0.5 kHz to 25 MHz Ultrasonic propagation range: 5 kHz to over 900 MHz (analysis confirmed) Ultrasonic propagation characteristics: 1) Detection of vibration modes 2) Detection of nonlinear phenomena 3) Detection of response characteristics 4) Detection of interactions
- Technology for controlling low-frequency resonance phenomena and high-frequency nonlinear phenomena based on sound pressure measurement analysis and evaluation.
- Non-destructive testing
- Vibration and Sound Level Meter
- others
Dynamic control technology of megahertz ultrasound - Nonlinear control technology of ultrasound using multiple function generators.
The Ultrasonic System Research Institute has developed a completely new dynamic control technology for ultrasound by utilizing multiple function generators. This technology enables the control of nonlinear ultrasonic phenomena through oscillation with several different waveforms (sweeping). Note: Nonlinear (resonance) phenomena By generating harmonics of the 10th order or higher through original oscillation control and resonating with low-frequency vibration phenomena, the generation of high-amplitude harmonics has been achieved, resulting in nonlinear (resonance) phenomena of ultrasonic vibrations. By optimizing the ultrasonic propagation characteristics of various components according to their intended purpose, efficient ultrasonic oscillation control becomes possible. Through the measurement and analysis of sound pressure data from ultrasonic testers, this system technology dynamically controls the changes in surface elastic waves according to the intended application. Ultrasonic Oscillation Control Probe Measurement and analysis range: 1 Hz to 200 MHz Oscillation range: 0.5 kHz to 25 MHz Ultrasonic propagation range: 5 kHz to over 900 MHz (analysis confirmed) Ultrasonic propagation characteristics: 1) Detection of vibration modes 2) Detection of nonlinear phenomena 3) Detection of response characteristics 4) Detection of interactions
Original ultrasonic probe for megahertz ultrasonic sweep oscillation and pulse oscillation system.
- Scientific Calculation and Simulation Software
- Non-destructive testing
- others
Dynamic control technology of megahertz ultrasound - Nonlinear control technology of ultrasound using multiple function generators.
The Ultrasonic System Research Institute has developed a completely new dynamic control technology for ultrasound by utilizing multiple function generators. This technology enables the control of nonlinear ultrasonic phenomena through oscillation with several different waveforms (sweeping). Note: Nonlinear (resonance) phenomena By generating harmonics of the 10th order or higher through original oscillation control and resonating with low-frequency vibration phenomena, the generation of high-amplitude harmonics has been achieved, resulting in nonlinear (resonance) phenomena of ultrasonic vibrations. By optimizing the ultrasonic propagation characteristics of various components according to their intended purpose, efficient ultrasonic oscillation control becomes possible. Through the measurement and analysis of sound pressure data from ultrasonic testers, this system technology dynamically controls the changes in surface elastic waves according to the intended application. Ultrasonic Oscillation Control Probe Measurement and analysis range: 1 Hz to 200 MHz Oscillation range: 0.5 kHz to 25 MHz Ultrasonic propagation range: 5 kHz to over 900 MHz (analysis confirmed) Ultrasonic propagation characteristics: 1) Detection of vibration modes 2) Detection of nonlinear phenomena 3) Detection of response characteristics 4) Detection of interactions
Dynamic Control Method for Megahertz Ultrasound Based on Classification Techniques Related to Ultrasonic Propagation Phenomena
- IoT
- Non-destructive testing
- Scientific Calculation and Simulation Software
Ultrasonic probe sweep oscillation technology - Oscillation control of low-frequency resonance phenomena and high-frequency nonlinear phenomena.
The Ultrasonic System Research Institute is applying and developing manufacturing technology for original ultrasonic probes. We have developed technology to optimize the nonlinear vibration phenomenon of surface acoustic waves through oscillation control technology based on the acoustic characteristics of the probes, and we provide consulting services for various ultrasonic utilization technologies. Note 1: Original nonlinear resonance phenomenon The resonance phenomenon of ultrasonic vibrations occurs due to the generation of harmonics resulting from original oscillation control of ultrasonic waves, which achieves high amplitude through resonance. The key point is the optimization of the ultrasonic propagation section. Note 2: By relaxing and homogenizing surface residual stress, stable ultrasonic oscillation control becomes possible. Technology for setting oscillation control conditions: 1) Setting of oscillation waveforms corresponding to the ultrasonic propagation characteristics of the device/equipment. 2) Setting of sweep conditions corresponding to the ultrasonic propagation characteristics of the device/equipment. 3) Setting of output levels corresponding to the ultrasonic propagation characteristics of the device/equipment. 4) Adjustment of various interactions corresponding to the ultrasonic propagation characteristics of the device/equipment.
Multi-functional, high-performance thermal imaging series featuring ultra-sensitive cooling detectors (InSb/MCT) with a 3M (1920x1536) pixel model available.
- Non-destructive testing
Regarding sound pressure measurement data, a classification and evaluation technique for ultrasonic propagation states using feedback solutions of time-series data—self-correlation and bispectrum.
- Scientific Calculation and Simulation Software
- Vibration and Sound Level Meter
- Non-destructive testing
Ultrasonic probe sweep oscillation technology - Oscillation control of low-frequency resonance phenomena and high-frequency nonlinear phenomena.
The Ultrasonic System Research Institute is applying and developing manufacturing technology for original ultrasonic probes. We have developed technology to optimize the nonlinear vibration phenomenon of surface acoustic waves through oscillation control technology based on the acoustic characteristics of the probes, and we provide consulting services for various ultrasonic utilization technologies. Note 1: Original nonlinear resonance phenomenon The resonance phenomenon of ultrasonic vibrations occurs due to the generation of harmonics resulting from original oscillation control of ultrasonic waves, which achieves high amplitude through resonance. The key point is the optimization of the ultrasonic propagation section. Note 2: By relaxing and homogenizing surface residual stress, stable ultrasonic oscillation control becomes possible. Technology for setting oscillation control conditions: 1) Setting of oscillation waveforms corresponding to the ultrasonic propagation characteristics of the device/equipment. 2) Setting of sweep conditions corresponding to the ultrasonic propagation characteristics of the device/equipment. 3) Setting of output levels corresponding to the ultrasonic propagation characteristics of the device/equipment. 4) Adjustment of various interactions corresponding to the ultrasonic propagation characteristics of the device/equipment.
Optimization of Cleaning with Ultrasonic Waves and Fine Bubbles (Microbubbles) for Specific Purposes
- others
- Scientific Calculation and Simulation Software
- Non-destructive testing
Function generator oscillation of ultrasonic transducer.
The Ultrasonic System Research Institute is applying measurement, analysis, and evaluation techniques related to the propagation state of ultrasound to publish technology that relaxes the surface residual stress of ultrasonic transducers using ultrasound and fine bubbles. This technology for relaxing surface residual stress has made it possible to improve fatigue strength against metal fatigue. As a result, the effects on various components, including ultrasonic tanks, have been demonstrated. Ultrasonic Probe: Outline Specifications Measurement Range: 0.01 Hz to 200 MHz Oscillation Range: 1.0 kHz to 25 MHz Propagation Range: 0.5 kHz to over 900 MHz (confirmation of acoustic pressure data analysis) Materials: Stainless steel, LCP resin, silicon, Teflon, glass, etc. Oscillation Equipment: Example - Function Generator Measurement Equipment: Example - Oscilloscope By controlling oscillation, we achieve propagation states tailored to the objectives regarding sound pressure level, frequency, and dynamic characteristics. Ultrasonic Propagation Characteristics 1) Detection of vibration modes (changes in self-correlation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates)
No helium gas needed! Optical leak detector compatible with various search gases.
- Non-destructive testing
You can check the cross-sectional conditions vertically and horizontally with the echo waveform display! It detects fine defects inside the material non-destructively.
- Non-destructive testing
To stabilize the effects of ultrasound, a statistical perspective is essential.
- Scientific Calculation and Simulation Software
- Non-destructive testing
- Other analytical equipment
Ultrasonic control technology applying mathematical theories of communication - Dynamic control model of ultrasound -
The Ultrasonic System Research Institute has developed ultrasonic control technology by applying the "Mathematical Theory of Communication" (Claude E. Shannon) to ultrasound. The developed technology utilizes ultrasonic sound pressure measurement, analysis, and evaluation techniques to adapt the propagation characteristics of ultrasound (dynamic characteristics) to the ensemble (entropy) of communication theory. Unlike the previous "technical problems" related to communication, this was developed as a technical application research addressing the "semantic problems" and "effect problems" related to ultrasonic phenomena. Furthermore, through the "evaluation technology for ultrasonic devices" at the Ultrasonic System Research Institute, concrete results using this method have been confirmed. For more details, we are responding and expanding this as a consulting business.
Ultrasonic oscillation control probe enabling control of resonance phenomena and nonlinear phenomena - Surface modification technology (relaxation of surface residual stress) through nonlinear oscilla...
- Scientific Calculation and Simulation Software
- Vibration and Sound Level Meter
- Non-destructive testing
Vibration control technology using megahertz ultrasound (control, improvement, and adjustment of vibration modes)
The Ultrasonic System Research Institute has developed a completely new technology for controlling vibrations using original products (ultrasonic systems). Based on the analysis and evaluation of ultrasonic sound pressure measurement and oscillation control technology developed so far, we perform oscillation control of megahertz ultrasonic waves based on the analysis and evaluation of nonlinear phenomena in ultrasonics. From the accumulation of data measuring, analyzing, and evaluating the dynamic characteristics of ultrasonic waves propagating on surfaces, we apply technology that can <measure, analyze, and evaluate> vibration states from low frequencies (0.1 Hz) to high frequencies (over 900 MHz). Regarding vibrations and noise from buildings and roads, equipment, devices, walls, piping, desks, handrails... the vibrations at the moment of metal melting during welding, instantaneous vibrations during machining, and the complex vibration states of entire manufacturing devices and systems... new countermeasures based on vibration measurement and analysis have become possible. This is a new method and technology, and various application cases have developed from the results obtained so far. In particular, since continuous data collection for a standard measurement time of 72 hours is possible, we can measure and respond to very low frequency vibrations and irregularly fluctuating vibrations.
Plating method using ultrasound and fine bubbles
- Scientific Calculation and Simulation Software
- others
- Non-destructive testing
Ultrasonic probe using a component with iron plating on polyimide film (technology utilizing ultrasonic propagation characteristics of iron plating)
The Ultrasonic System Research Institute has developed an ultrasonic oscillation control probe using components coated with iron on polyimide film. By applying this technology, we provide consulting services for "ultrasonic and vibration measurement, propagation control..." for various curved surfaces. Ultrasonic Probe: Overview Specifications Measurement Range: 0.01 Hz to 100 MHz Oscillation Range: 1 kHz to 25 MHz Propagation Range: 1 kHz to over 900 MHz Materials: Stainless steel, LCP resin, silicon, Teflon, glass... Oscillation Equipment Example: Function Generator By understanding the acoustic characteristics of the target object and installation conditions, we have achieved dynamic control of surface elastic waves (propagation state). We realize propagation states tailored to various purposes (cleaning, stirring, etc.). Ultrasonic Propagation Characteristics 1) Detection of vibration modes (changes in self-correlation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates)
Low-cost entry model of UV-LED irradiation device now available!
- Non-destructive testing
Using independently developed equipment. Capable of handling a variety of objects, large and small, from sample pieces to finished products.
- Non-destructive testing
Consulting services for processing technology utilizing megahertz ultrasonic oscillation control - Utilizing nonlinear phenomena of ultrasound.
- others
- Non-destructive testing
- Other measuring instruments
Dynamic control technology of ultrasound applied using Shannon's juggling theorem.
The Ultrasonic System Research Institute has developed a "Dynamic Control Method for Megahertz Ultrasound" by applying Shannon's Juggling Theorem. << Application of Shannon's Juggling Theorem >> (F + F2 + ...) * H = (V + V2 + ...) * N F: The oscillation ratio of the base ultrasonic 1 F2: The oscillation ratio of the base ultrasonic 2 F3: The oscillation ratio of the base ultrasonic 3 H: Basic time (maximum control cycle time) (H = MAX(oscillation cycle of ultrasonic 1, oscillation cycle of ultrasonic 2, ...)) V: Megahertz oscillation cycle time by ultrasonic probe 1 V2: Megahertz oscillation cycle time by ultrasonic probe 2 V3: Megahertz oscillation cycle time by ultrasonic probe 3 V4: Megahertz oscillation cycle time by ultrasonic probe 4 (In the case of pulse oscillation, cycle time = 1) N: Adjustment parameters for harmonics 7, 11, 13, 17, 23, 43, 47, ... The key point (know-how) is to control the occurrence state of nonlinear phenomena based on the measurement, analysis, and evaluation of sound pressure data.
Consulting support from the Ultrasonic System Research Institute.
- others
- Non-destructive testing
- Water Treatment
Ultrasonic Oscillation System USP 20MHz Specification Document
Ultrasonic Oscillation System (20MHz Type) USP-2021-20MHz B-1 KKmoon Signal Generator 1 set Function Generator 200MSa/s 25MHz B-2 Original Initial Settings for KKmoon Signal Generator Simple Operation Manual B-3 Ultrasonic Oscillation Control Probes 2 pieces Ultrasonic Probe: Overview Specifications Measurement Range 0.01Hz to 200MHz Oscillation Range 0.5kHz to 25MHz Propagation Range 0.5kHz to over 900MHz (confirmed evaluation through analysis) Material Stainless Steel, LCP Resin, Silicon, Teflon, Glass... Oscillation Equipment Example Function Generator Recommended Settings Example ch1 Square Wave 47.1% (duty) 8.0MHz Output 13.4V ch2 Square Wave 43.7% (duty) 11.0MHz Output 13.7V Sweep Oscillation Conditions Square Wave 3MHz to 18MHz, 2 seconds Ultrasonic Propagation Characteristics 1) Detection of Vibration Modes (Changes in Self-Correlation) 2) Detection of Nonlinear Phenomena (Changes in Bicoherence) 3) Detection of Response Characteristics 4) Detection of Interactions
Proposal for a cleaning method optimized with fine bubbles and megahertz ultrasonic waves.
- others
- Non-destructive testing
- Scientific Calculation and Simulation Software
Improvement of the ultrasonic cleaning machine (addition of fine bubble generation system for on-site support) - megahertz flow-type ultrasonic using degassed fine bubble generation liquid circulation.
Application of technology to analyze and evaluate the dynamic characteristics of ultrasound The Ultrasound System Research Institute has developed a method (system) for the analysis and evaluation of ultrasound, utilizing measurement, analysis, and control technology related to the nonlinearity of ultrasound. Using this technology, we are providing on-site support for the additional installation of a degassing fine bubble generation liquid circulation system. To utilize (control) the complex and changing conditions of ultrasound in a stable manner according to the purpose, we offer on-site services to add, install, and confirm sound pressure measurements for the degassing fine bubble generation liquid circulation system in specific tanks present at the site. <Example> *Month* *Day* - Consultation and confirmation via email *Month* *Day* 13:00 - 13:30 - Greetings and meeting 13:30 - 16:30 - Confirmation (simple sound pressure measurement) Setting up the degassing fine bubble generation liquid circulation system Operation explanation Confirmation (sound pressure measurement) 16:30 - 17:00 - Discussion based on sound pressure data 17:00 - 18:00 - Reserve A simple analysis of the measurement data will be conducted. A report including the analysis results of the sound pressure data will be submitted one week later.
Application of technology to control the interaction between ultrasound and water tanks.
- Scientific Calculation and Simulation Software
- Non-destructive testing
- others
Ultrasonic oscillation control probe using a stainless steel vacuum double-walled container.
Technology for Manufacturing Ultrasonic Oscillation Control Probes in Megahertz -- Consulting Support for Manufacturing Know-How -- The Ultrasonic System Research Institute has developed technology to manufacture ultrasonic probes that can control ultrasonic propagation states above 900 MHz, tailored to specific applications. Ultrasonic Probe: Overview Specifications - Measurement Range: 0.01 Hz to 200 MHz - Oscillation Range: 1.0 kHz to 25 MHz - Propagation Range: 0.5 kHz to over 900 MHz (verification of sound pressure data analysis) - Materials: Stainless steel, LCP resin, silicon, Teflon, glass, etc. - Oscillation Equipment: Example - Function Generator By understanding the acoustic properties of metals, resins, and glass, we achieve propagation states tailored to specific purposes regarding sound pressure levels, frequency, and dynamic characteristics through oscillation control.
Technology for manufacturing megahertz ultrasonic oscillation control probes - Consulting support for manufacturing know-how.
- Non-destructive testing
- Vibration and Sound Level Meter
- others
Megahertz ultrasonic surface elastic wave control technology
The Ultrasonic System Research Institute has developed dynamic control technology for surface elastic waves, taking into account the propagation characteristics and paths of ultrasound using an original ultrasonic system (sound pressure measurement, analysis, evaluation, and oscillation control). This is a foundational technology for developing a nonlinear control system for ultrasound. It enables various applications tailored to specific purposes (cleaning, processing, stirring, chemical reactions, etc.). We are publishing fundamental experiments on megahertz ultrasound for various materials, structures, and sizes. The key point is the setting of oscillation conditions (waveform, output, frequency, variations, etc.) as a vibration system that allows for efficient control of nonlinear phenomena related to ultrasonic propagation. As specific technologies, we have developed concrete system technologies that control nonlinear phenomena (bi-spectral) resulting from the interaction of ultrasound with water tanks, tools, etc., according to specific purposes (cleaning, stirring, processing, welding, surface treatment, stress relief treatment, inspection, etc.).
Technology for stirring, emulsifying, dispersing, and grinding at the nanoscale using techniques to control nonlinear phenomena of ultrasound.
- Concrete admixture
- Non-destructive testing
- others
Ultrasonic Oscillation Control System (Catalog)
--- Nonlinear Oscillation Control Device Using Megahertz Ultrasonic Waves --- The Ultrasonic System Research Institute manufactures and sells an "Ultrasonic Oscillation System" that allows for easy control of megahertz ultrasonic oscillation. Ultrasonic Probe: Outline Specifications Measurement Range: 0.01 Hz to 200 MHz Oscillation Range: 0.5 kHz to 25 MHz Propagation Range: 0.5 kHz to over 900 MHz (confirmed and evaluated through analysis) Materials: Stainless steel, LCP resin, silicone, Teflon, glass... Oscillation Equipment Examples: Function Generators 1) JDS6600-60M (60 MHz 2ch 266 MSa/s) 2) DG1022Z (25 MHz 2ch 200 MSa/s) 3) FY3224S (24 MHz 2ch 250 MSa/s) 4) MHS-5200A (25 MHz 2ch 200 MSa/s) Recommended Settings ch1 Square Wave 47.1% (duty) 8.0 MHz Output 13.4 V ch2 Square Wave 43.7% (duty) 11.0 MHz Output 13.7 V Sweep Oscillation Conditions Square Wave 3.5 MHz to 15 MHz, 2 seconds
Automation of printing inspection, pinhole inspection, seal misalignment inspection, and bite inspection in a food factory on one line.
- Non-destructive testing
Measurement of concrete structures using micro-destruction and non-destructive testing, vibration and noise measurement.
- Non-destructive testing
As a member of the on-site team, I will support various on-site operations and promote the advancement and labor-saving of tasks!
- Non-destructive testing
Easily diagnose the degradation state of lubricants on the spot using a smartphone. Determine the remaining lifespan rate and contribute to stable machine operation through efficient maintenance. *Exh...
- Non-destructive testing
Easily check the condition of lubricant oil degradation and contamination. It can also be used for foreign substance inspection of liquids.
- Non-destructive testing
[First Letter] We will exhibit at JIMTOF2024! (For the first time in 6 years)
32nd Japan International Machine Tool Fair â—† Tokyo Big Sight (Tokyo International Exhibition Center) â—† November 5 (Tuesday) - November 19 (Friday), 2024, for 3 days â—† Exhibited products: Lubricants and greases that contribute to improving factory productivity and reducing environmental impact - "Water-soluble cutting oil" that significantly reduces replenishment volume - "Lubricants and greases for equipment" that contribute to CO2 reduction - "Lubrication management technology and sensors" - "Next-generation lubrication solutions" JIMTOF HP https://www.jimtof.org/jp/index.html ~ We look forward to your visit. Please wait for additional updates. ~
Ultrasonic oscillation control system using a commercial function generator and ultrasonic oscillation probe.
- Non-destructive testing
- others
- Other measuring instruments
Ultrasound system (sound pressure measurement analysis 100MHz, oscillation control 25MHz) No. 2
The Ultrasonic System Research Institute (Location: Hachioji City, Tokyo) manufactures and sells a system that combines the "Ultrasonic Tester NA (100 MHz type)," which makes ultrasonic measurement and analysis easy, and the "Ultrasonic Oscillation System (20 MHz type)," which allows for easy control of ultrasonic oscillation. System Overview (Recommended System): :: Ultrasonic Tester NA 100 MHz type :: Oscillation System 20 MHz type System Overview (Ultrasonic Tester NA 100 MHz type): This is a measurement system using an ultrasonic probe. The ultrasonic probe is attached to the target object for oscillation and measurement. The measured data is analyzed considering position, state, and elastic waves, detecting various acoustic performances. System Overview (Ultrasonic Oscillation System (20 MHz type)): This is a system that utilizes a commercially available function generator. By adding megahertz ultrasonic stimulation to various devices, including those utilizing ultrasound, improvements and enhancements are made.
Nonlinear control technology for ultrasound based on sound pressure measurement analysis.
- Scientific Calculation and Simulation Software
- Other measuring instruments
- Non-destructive testing
Optimization technology related to the combination of sound and ultrasound.
The Ultrasonic System Research Institute has developed the following technologies: * Measurement technology for ultrasonic propagation conditions (Original product: Ultrasonic Tester) * Analysis and evaluation technology for ultrasonic propagation conditions (Nonlinear analysis system for time-series data) * Dynamic control technology for ultrasonic propagation conditions (Analysis technology for the interaction between sound and ultrasound) * Control technology for the generation of surface elastic waves (Manufacturing technology for ultrasonic oscillation control probes) .... Using the above technologies, we have developed optimization technology related to the combination of sound and ultrasound. We optimize and apply dynamic nonlinear vibration phenomena (Note) resulting from the combination of sound and ultrasound according to the intended purpose. Note: Original nonlinear resonance phenomenon This phenomenon occurs due to the generation of harmonics through original oscillation control, realized at high amplitudes by resonance phenomena, and is evaluated as a resonance phenomenon of ultrasonic vibrations. As an application example of this technology, we have achieved effective utilization of ultrasound (cleaning, modification, stirring, chemical reaction promotion, etc.) tailored to the conditions of various parts and materials (in air, underwater, in contact with elastic bodies, etc.).
Development of "Control Technology for Nonlinear Phenomena" Using a Small Pump
- Scientific Calculation and Simulation Software
- Vibration and Sound Level Meter
- Non-destructive testing
Technical documentation on the use of fine bubbles (microbubbles) in ultrasonic applications - Deaeration fine bubble generation liquid circulation device.
Technology for stably utilizing fine bubbles with a spherical size of 20μm or less—nano-level cleaning method that controls acoustic flow of ultrasound— 1-1. Basics of Ultrasound 1-2. Propagation Phenomena of Ultrasonic Vibration 1-3. Fine Bubbles (Microbubbles) *Properties of Microbubbles* 1) Bubbles of about 10μm rise slowly over approximately 3 hours to a height of 1m. 2) The generated bubbles exist independently without coalescing, resulting in excellent dispersion. 3) They have the property of slowly rising in water and adsorbing tiny debris to bring it to the surface. ... 13) The negative potential depends on the pH of the water. 14) Microbubbles have excellent scattering characteristics for ultrasound. 15) Microbubbles collapse as a resonance phenomenon when exposed to ultrasonic irradiation. These properties are expected to be further elucidated in the future, but currently contain many unknown aspects. Propagation Characteristics of Ultrasound 1) Detection of Vibration Modes (Changes in Self-Correlation) 2) Detection of Nonlinear Phenomena (Changes in Bicoherence) 3) Detection of Response Characteristics (Analysis of Impulse Response) 4) Detection of Interactions (Analysis of Power Contribution Rate)
Application technologies of <control, measurement, analysis, evaluation> using ultrasonic testers.
- Non-destructive testing
- Other measuring instruments
- others
Ultrasound, Fine Bubbles, and Surface Elastic Waves - Surface Treatment Technology -
The Ultrasonic System Research Institute has developed (and published) technology to control the propagation phenomena of megahertz ultrasonic waves using ultrasound and fine bubbles/microbubbles and surface elastic waves. By optimizing the acoustic properties of surface elastic waves (in resin, steel, stainless steel, glass, ceramics, etc.) for the technology that alleviates surface residual stress using ultrasound and fine bubbles/microbubbles, we have developed methods for utilizing ultrasound tailored to specific purposes. In particular, there has been an increase in achievements related to ultrasonic cleaning, plating treatment, and the homogenization effect of liquids. Ultrasonic Probe: Outline Specifications Measurement Range: 0.01 Hz to 100 MHz Oscillation Range: 1 kHz to 25 MHz Propagation Range: 1 kHz to over 900 MHz Materials: Stainless steel, LCP resin, silicon, Teflon, glass, etc. Oscillation Equipment Example: Function Generator Ultrasonic Propagation Characteristics 1) Detection of vibration modes (changes in self-correlation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates)
We provide manufacturing technology and data analysis evaluation technology.
- others
- Non-destructive testing
- Other analytical equipment
"Experiences Regarding Shannon's First Theorem" - Original Technology Development -
* "Shannon's First Theorem" The relationship between information and entropy (as information increases, entropy decreases) Entropy: The average amount of information per symbol from a memoryless information source ... "Experiences Related to Shannon's First Theorem" — Original Technology Development — 1) Theme "Shannon's First Theorem is practically useful based on experience" 1-1) Useful for creating models related to the consideration of basic systems (Note 1) 1-2) Useful as foundational knowledge regarding data and noise (While it may be difficult to understand its necessity in routine development tasks, when considered from the perspective of high originality in research and development of new products, it is very effective as a research viewpoint (Note 2)) Note 1: Example - Consistency and systematization of objects related to system development (e.g., algorithms) Note 2: Example - Cause analysis of machine vibrations, electrical noise, program bugs, and defects...
Surface inspection technology utilizing ultrasonic transmission and reception characteristics.
- Other measuring instruments
- Non-destructive testing
- others
Ultrasonic Oscillation System USP 20MHz Specification Document
Ultrasonic Oscillation System (20MHz Type) USP-2021-20MHz B-1 KKmoon Signal Generator 1 set Function Generator 200MSa/s 25MHz B-2 Original Initial Settings for KKmoon Signal Generator Simple Operation Manual B-3 Ultrasonic Oscillation Control Probes 2 pieces Ultrasonic Probe: Overview Specifications Measurement Range 0.01Hz to 200MHz Oscillation Range 0.5kHz to 25MHz Propagation Range 0.5kHz to over 900MHz (confirmed evaluation through analysis) Material Stainless Steel, LCP Resin, Silicon, Teflon, Glass... Oscillation Equipment Example Function Generator Recommended Settings Example ch1 Square Wave 47.1% (duty) 8.0MHz Output 13.4V ch2 Square Wave 43.7% (duty) 11.0MHz Output 13.7V Sweep Oscillation Conditions Square Wave 3MHz to 18MHz, 2 seconds Ultrasonic Propagation Characteristics 1) Detection of Vibration Modes (Changes in Self-Correlation) 2) Detection of Nonlinear Phenomena (Changes in Bicoherence) 3) Detection of Response Characteristics 4) Detection of Interactions
Acoustic property test using ultrasound
- Other measuring instruments
- Non-destructive testing
- others
Development technology of ultrasonic systems based on sound pressure measurement analysis.
The Ultrasonic System Research Institute has developed analysis, design, and manufacturing technologies for ultrasonic <cleaning, stirring, etc.> systems based on measurement, analysis, and evaluation of ultrasonic propagation conditions. 1: Measurement and analysis of the acoustic characteristics of ultrasonic equipment and target objects (cleaning items, etc.) 2: Design and adjustment of tanks and transducers based on acoustic characteristics (selection of multiple different frequency ultrasonic transducers as needed, or adoption of megahertz ultrasonic oscillation control probes, etc.) 3: Optimization of ultrasonic oscillation control conditions for target objects 4: Design, manufacturing, and development of liquid circulation systems containing fine bubbles, tailored to ultrasonic control 5: Design of tanks and jigs based on the above sound pressure measurement analysis (optimization of nonlinear phenomena according to purpose) 6: Manufacturing utilizing fine bubbles and ultrasound (aging treatment and surface residual stress relaxation treatment of tanks, transducers, jigs, etc. using fine bubbles and ultrasound) 7: Confirmation of ultrasonic propagation characteristics of ultrasonic transducers, tanks, and jigs using an ultrasonic tester (sound pressure measurement and analysis system) 7-1: Verification of ultrasonic propagation characteristics of ultrasonic transducers, tanks, and jigs 7-2: Optimization of ultrasonic control/output, liquid circulation control, and cavitation, etc.
Surface inspection using ultrasonic oscillation from ultrasonic probes (oscillating type, measuring type, resonant type, nonlinear type).
- Other measuring instruments
- Non-destructive testing
- others
Ultrasound, Fine Bubbles, and Surface Elastic Waves - Surface Treatment Technology -
The Ultrasonic System Research Institute has developed (and published) technology to control the propagation phenomena of megahertz ultrasonic waves using ultrasound and fine bubbles/microbubbles and surface elastic waves. By optimizing the acoustic properties of surface elastic waves (in resin, steel, stainless steel, glass, ceramics, etc.) for the technology that alleviates surface residual stress using ultrasound and fine bubbles/microbubbles, we have developed methods for utilizing ultrasound tailored to specific purposes. In particular, there has been an increase in achievements related to ultrasonic cleaning, plating treatment, and the homogenization effect of liquids. Ultrasonic Probe: Outline Specifications Measurement Range: 0.01 Hz to 100 MHz Oscillation Range: 1 kHz to 25 MHz Propagation Range: 1 kHz to over 900 MHz Materials: Stainless steel, LCP resin, silicon, Teflon, glass, etc. Oscillation Equipment Example: Function Generator Ultrasonic Propagation Characteristics 1) Detection of vibration modes (changes in self-correlation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates)
Ultrasonic oscillation control technology for controlling nonlinear vibration phenomena
- others
- Other analytical equipment
- Non-destructive testing
Ultrasonic oscillation probe utilizing a combination of stainless steel wire and Teflon tube.
The Ultrasonic System Research Institute has developed a technology for controlling ultrasonic oscillation using nonlinear vibration phenomena caused by surface elastic waves in wire materials. By confirming the basic acoustic properties (response characteristics, propagation characteristics) of various wire materials (stainless steel, copper, resin, etc.), the combination of stainless steel and Teflon tubes enables complex acoustic characteristics. As a result, the desired ultrasonic propagation state can be achieved through oscillation control. Using an ultrasonic oscillation control probe, we set the conditions for sweep oscillation based on the measurement and analysis of the intended purpose and interactions. In particular, to control low-frequency resonance phenomena, we utilize high-frequency nonlinear phenomena. For this purpose, sound pressure measurements require a measurement range of over 100 MHz. The key point is to evaluate the dynamic vibration characteristics of the system based on the measurement and analysis of sound pressure data. We have established and confirmed new evaluation criteria (parameters) that indicate the state of ultrasound suitable for the intended purpose. Note: - Nonlinear characteristics (dynamic characteristics of harmonics) - Response characteristics - Fluctuation characteristics - Effects due to interactions
Application of processing technologies utilizing nonlinear phenomena of ultrasound (acoustic flow, generation of harmonics, etc.) for nano-level emulsification, dispersion, and grinding.
- Non-destructive testing
- Secondary steel products
- Other Hydrogen/Fuel Cells
Development technology of ultrasonic systems based on sound pressure measurement analysis.
The Ultrasonic System Research Institute has developed analysis, design, and manufacturing technologies for ultrasonic <cleaning, stirring, etc.> systems based on measurement, analysis, and evaluation of ultrasonic propagation conditions. 1: Measurement and analysis of the acoustic characteristics of ultrasonic equipment and target objects (cleaning items, etc.) 2: Design and adjustment of tanks and transducers based on acoustic characteristics (selection of multiple different frequency ultrasonic transducers as needed, or adoption of megahertz ultrasonic oscillation control probes, etc.) 3: Optimization of ultrasonic oscillation control conditions for target objects 4: Design, manufacturing, and development of liquid circulation systems containing fine bubbles, tailored to ultrasonic control 5: Design of tanks and jigs based on the above sound pressure measurement analysis (optimization of nonlinear phenomena according to purpose) 6: Manufacturing utilizing fine bubbles and ultrasound (aging treatment and surface residual stress relaxation treatment of tanks, transducers, jigs, etc. using fine bubbles and ultrasound) 7: Confirmation of ultrasonic propagation characteristics of ultrasonic transducers, tanks, and jigs using an ultrasonic tester (sound pressure measurement and analysis system) 7-1: Verification of ultrasonic propagation characteristics of ultrasonic transducers, tanks, and jigs 7-2: Optimization of ultrasonic control/output, liquid circulation control, and cavitation, etc.
A completely new vibration measurement technology using original products (ultrasonic testers).
- Non-destructive testing
- Other measuring instruments
- others
Ultrasound "Sound Pressure Measurement Analysis Device (Ultrasound Tester NA)"
The Ultrasonic System Research Institute manufactures and sells the "Ultrasonic Tester NA (Standard Type)," which allows for easy measurement and analysis of ultrasonic waves. System Overview (Recommended System: Ultrasonic Tester NA) 1. Price 10 MHz type: 198,000 yen (including tax: 10% consumption tax) (100 MHz type and 200 MHz type have been discontinued as of June 10, 2024) 2. Contents One dedicated probe for measuring sound pressure of ultrasonic cleaners One general-purpose ultrasonic measurement probe One oscilloscope set One set of analysis software, instruction manual, and various installation sets (USB memory) 3. Features (Standard Specifications) * Measurement (analysis) frequency range 10 MHz type: 0.1 Hz to 10 MHz 100 MHz type: 0.1 Hz to 100 MHz 200 MHz type: 0.1 Hz to 200 MHz * Capable of measuring surface vibrations * Continuous measurement for 24 hours is possible * Simultaneous measurement of any two points * Measurement results displayed in graph form * Analysis software for time-series data included Regarding the 100 MHz type and 200 MHz type Alternatives are currently under consideration.
Dynamic control technology of ultrasound through sweeping oscillation of multiple ultrasonic probes.
- Other measuring instruments
- Non-destructive testing
- others
"Experiences Regarding Shannon's First Theorem" - Original Technology Development -
* "Shannon's First Theorem" The relationship between information and entropy (as information increases, entropy decreases) Entropy: The average amount of information per symbol from a memoryless information source ... "Experiences Related to Shannon's First Theorem" — Original Technology Development — 1) Theme "Shannon's First Theorem is practically useful based on experience" 1-1) Useful for creating models related to the consideration of basic systems (Note 1) 1-2) Useful as foundational knowledge regarding data and noise (While it may be difficult to understand its necessity in routine development tasks, when considered from the perspective of high originality in research and development of new products, it is very effective as a research viewpoint (Note 2)) Note 1: Example - Consistency and systematization of objects related to system development (e.g., algorithms) Note 2: Example - Cause analysis of machine vibrations, electrical noise, program bugs, and defects...
Application technology of <measurement, analysis, and control> using ultrasonic testers.
- Other measuring instruments
- Non-destructive testing
- others
Ultrasound system (sound pressure measurement analysis 100MHz, oscillation control 25MHz) No. 2
The Ultrasonic System Research Institute (Location: Hachioji City, Tokyo) manufactures and sells a system that combines the "Ultrasonic Tester NA (100 MHz type)," which makes ultrasonic measurement and analysis easy, and the "Ultrasonic Oscillation System (20 MHz type)," which allows for easy control of ultrasonic oscillation. System Overview (Recommended System): :: Ultrasonic Tester NA 100 MHz type :: Oscillation System 20 MHz type System Overview (Ultrasonic Tester NA 100 MHz type): This is a measurement system using an ultrasonic probe. The ultrasonic probe is attached to the target object for oscillation and measurement. The measured data is analyzed considering position, state, and elastic waves, detecting various acoustic performances. System Overview (Ultrasonic Oscillation System (20 MHz type)): This is a system that utilizes a commercially available function generator. By adding megahertz ultrasonic stimulation to various devices, including those utilizing ultrasound, improvements and enhancements are made.
Application of ultrasonic sound pressure measurement, analysis, and evaluation technology.
- Other measuring instruments
- Non-destructive testing
- others
Megahertz ultrasonic cleaner
The Ultrasonic System Research Institute has developed ultrasonic cleaning technology that enables control of acoustic flow (ultrasonic propagation state) from 1 to 100 MHz by utilizing a megahertz ultrasonic oscillation control probe in relation to ultrasonic cleaners. This is a new application technology for precision cleaning, processing, and stirring based on the measurement, analysis, evaluation, and technology of ultrasonic propagation states. By utilizing the acoustic properties (surface elastic waves) of various materials, ultrasonic stimulation to the target object can be controlled even in a 1000-liter water tank with ultrasonic output below 20W. It was developed as an application method for nonlinear phenomena through an engineering (experimental and technical) perspective on elastic wave propagation and an abstract algebraic ultrasonic model. The key point is the use of tools (elastic bodies: metals, glass, resins). By confirming the propagation characteristics of ultrasonic waves depending on the conditions of the target object, it is important to address it as an original nonlinear resonance phenomenon (Note 1). Note 1: Original nonlinear resonance phenomenon refers to the resonance phenomenon of ultrasonic vibrations that occurs due to the generation of harmonics resulting from original oscillation control, realized at high amplitudes through resonance phenomena.
Ultrasonic probe-based sweep oscillation system - a technology for controlling low-frequency resonance phenomena and high-frequency nonlinear phenomena.
- Non-destructive testing
- Other analytical equipment
- others
Ultrasonic oscillation probe utilizing a combination of stainless steel wire and Teflon tube.
The Ultrasonic System Research Institute has developed a technology for controlling ultrasonic oscillation using nonlinear vibration phenomena caused by surface elastic waves in wire materials. By confirming the basic acoustic properties (response characteristics, propagation characteristics) of various wire materials (stainless steel, copper, resin, etc.), the combination of stainless steel and Teflon tubes enables complex acoustic characteristics. As a result, the desired ultrasonic propagation state can be achieved through oscillation control. Using an ultrasonic oscillation control probe, we set the conditions for sweep oscillation based on the measurement and analysis of the intended purpose and interactions. In particular, to control low-frequency resonance phenomena, we utilize high-frequency nonlinear phenomena. For this purpose, sound pressure measurements require a measurement range of over 100 MHz. The key point is to evaluate the dynamic vibration characteristics of the system based on the measurement and analysis of sound pressure data. We have established and confirmed new evaluation criteria (parameters) that indicate the state of ultrasound suitable for the intended purpose. Note: - Nonlinear characteristics (dynamic characteristics of harmonics) - Response characteristics - Fluctuation characteristics - Effects due to interactions
Ultrasonic probe capable of controlling ultrasonic propagation conditions above 900 MHz.
- Other analytical equipment
- Non-destructive testing
- others
Control technology for acoustic flow (nonlinear phenomena) using a portable ultrasonic cleaner.
Ultrasonic Oscillation Control Technology Using Portable Ultrasonic Cleaners and Ultrasonic Probes The Ultrasonic System Research Institute has developed a technology to control "nonlinear phenomena of ultrasound (acoustic flow)" through the combination of portable ultrasonic cleaners and ultrasonic probes for megahertz oscillation control. This technology controls the dynamic characteristics of ultrasound (cavitation and acoustic flow) based on the analysis of changing ultrasonic sound pressure data (nonlinear). Tailored to the structure, material, and acoustic properties of specific objects, it measures and confirms the interactions between ultrasound, the object, the water tank, fixtures, and cleaning solutions to establish optimal oscillation conditions for the ultrasonic probe that suit the intended purpose. Note: Oscillation waveform, oscillation output, control conditions, etc. (e.g., square wave, duty 47%, 13V, sweep oscillation, 3-18 MHz...) Through original measurement and analysis technology for ultrasonic propagation states, we provide consulting services for the evaluation of acoustic flow and a wealth of know-how.
- Optimization technology for ultrasound through megahertz ultrasonic sweep oscillation control -
- pump
- Non-destructive testing
- Other measuring instruments
"Experiences Regarding Shannon's First Theorem" - Original Technology Development -
* "Shannon's First Theorem" The relationship between information and entropy (as information increases, entropy decreases) Entropy: The average amount of information per symbol from a memoryless information source ... "Experiences Related to Shannon's First Theorem" — Original Technology Development — 1) Theme "Shannon's First Theorem is practically useful based on experience" 1-1) Useful for creating models related to the consideration of basic systems (Note 1) 1-2) Useful as foundational knowledge regarding data and noise (While it may be difficult to understand its necessity in routine development tasks, when considered from the perspective of high originality in research and development of new products, it is very effective as a research viewpoint (Note 2)) Note 1: Example - Consistency and systematization of objects related to system development (e.g., algorithms) Note 2: Example - Cause analysis of machine vibrations, electrical noise, program bugs, and defects...