Manufacturing and sales of ultrasonic systems (sound pressure measurement analysis 100MHz, oscillation control 25MHz)

Ultrasound is captured as a <ultrasound dynamic system>, and analysis and control are performed.

The Ultrasonic System Research Institute has applied and developed technology utilizing "ultrasonic transducers" of multiple different frequencies. The applied technology developed this time is a technique that changes the effects of cavitation and acceleration into a specific power spectrum of propagation frequency through the control of standing waves. With ultrasonic irradiation at frequencies of 28 + 72 kHz and an output of 200 W, it is possible to achieve a dispersion effect of 1 micron. Additionally, ultrasonic irradiation at frequencies of 28 + 40 kHz and an output of 280 W can clean without causing damage. Through original measurement and analysis technology of ultrasonic propagation states, we have confirmed that control states can be realized by the combination of transducers. This represents a new ultrasonic technology, which, including the general effects of ultrasonic dynamic characteristics, serves as a significant and distinctive operational technique for the development of new materials, stirring, dispersion, cleaning, chemical reaction experiments, etc., and is utilized and developed in consulting. We will provide consulting support regarding the logical explanation of the principles and specific methods (techniques).

• others

Ultrasonic control technology based on the classification of nonlinear phenomena in which ultrasonic vibrations propagate.

The Ultrasonic System Research Institute has developed a classification method for the phenomenon of ultrasonic vibration propagation by analyzing measurement data of ultrasonic propagation states using bispectral analysis. The method developed in this instance estimates the linear and nonlinear resonance effects based on the dynamic characteristics (changes in nonlinear phenomena) of the main frequencies (power spectrum) related to the ultrasonic propagation state. From previous data analysis, we have been able to classify effective utilization methods into the following four types: 1: Linear type 2: Nonlinear type 3: Mixed type 4: Variable type There are numerous successful cases of device development and control settings based on each of the above types. This technology will be offered as a consulting service. Ultrasonic propagation characteristics: 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates) Note: The following tools will be used for analysis. Note: "R" is a free statistical processing language and environment.

• Other Software

A technology for stably utilizing fine bubbles with a spherical size of 20μm or less—nano-level cleaning method that controls ultrasonic acoustic flow.

The Ultrasonic System Research Institute has developed an ultrasonic cleaning machine utilizing fine bubbles, based on measurement, analysis, and evaluation techniques related to ultrasonic propagation phenomena, which can also be used for ultrasonic processing, stirring, and chemical reactions. Recommended System Overview 1: An ultrasonic transducer subjected to surface modification treatment using ultrasonic waves and fine bubbles. 2: An ultrasonic dedicated tank subjected to surface modification treatment using ultrasonic waves and fine bubbles. 3: A degassing and fine bubble (microbubble) generation liquid circulation system. 4: An optimization control system for ultrasonic waves and liquid circulation controlled by a control device. 5: An acoustic pressure management system using an ultrasonic tester. Note: The tank, transducer, and tools can be adjusted for acoustic characteristics through aging treatment. *Features This is an effective cleaning device using a dedicated ultrasonic tank. Due to the efficient use of ultrasonic waves, the strength and durability of a standard tank become insufficient. (The standard tank is modified for surface treatment using ultrasonic waves and fine bubbles.) Ultrasonic waves (cavitation and acoustic flow) are controlled according to the target and purpose of cleaning, stirring, and surface modification.

• pump
• Drainage and ventilation equipment
• Water Treatment

Ultrasonic probe capable of controlling ultrasonic propagation conditions above 900 MHz.

The Ultrasonic System Research Institute offers custom-made ultrasonic probes capable of controlling ultrasonic propagation states above 900 MHz. We manufacture and develop original ultrasonic oscillation control probes tailored to your objectives. Ultrasonic Probe: General Specifications - Measurement Range: 0.01 Hz to 200 MHz - Oscillation Range: 0.5 kHz to 25 MHz - Propagation Range: 0.5 kHz to over 900 MHz (confirmed and evaluated through analysis) - Materials: Stainless steel, LCP resin, silicone, Teflon, glass, etc. - Oscillation Equipment: Example - Function Generator By understanding the acoustic properties of metals, resins, glass, etc., we achieve propagation states tailored to your needs regarding sound pressure level, frequency, and dynamic characteristics through oscillation control. This is a new foundational technology for precision cleaning, processing, stirring, inspection, etc., based on measurement, analysis, and evaluation techniques for ultrasonic propagation states. By utilizing the acoustic properties (surface elastic waves) of various materials (such as glass containers), ultrasonic stimulation to structures and machine tools weighing several tons can be controlled with ultrasonic output below 20 W, even in a 5000-liter water tank.

• Non-destructive testing
• Other analytical equipment
• others

We provide on-site services for the measurement, analysis, and evaluation of ultrasonic equipment.

Application of technology to analyze and evaluate the dynamic characteristics of ultrasound The Ultrasound System Research Institute has developed a method (system) for the <analysis, experimentation, and evaluation> of ultrasound, utilizing "measurement, analysis, and control" technology related to the nonlinearity of ultrasound. Using this technology, we conduct <sound pressure measurement, experimentation, analysis, and evaluation> (including on-site support) for ultrasonic cleaning machines. To evaluate the complex and varying usage conditions of ultrasound, we do not rely solely on sound pressure and frequency; instead, we consider "timbre." We analyze it using a time series data autoregressive model and report and propose <evaluation and application> based on statistical models.

• pump
• Turbid water and muddy water treatment machines
• Manufacturing Technology

We provide consulting services based on sound pressure measurement and analysis of ultrasonic equipment.

**Analysis and Evaluation of Ultrasonic Sound Pressure Data** 1) Regarding time series data, we will analyze and evaluate the statistical properties of the measurement data (stability and changes of ultrasonic waves) through feedback analysis using a multivariate autoregressive model. 2) The effects of the oscillation part due to ultrasonic oscillation will be analyzed and evaluated as response characteristics of the ultrasonic vibration phenomenon concerning the surface state of the target object through impulse response characteristics and autocorrelation analysis. 3) The interaction between the oscillation and the target object (cleaning items, cleaning solution, water tank, etc.) will be evaluated through the analysis of power contribution rates. 4) Concerning the use of ultrasound (cleaning, processing, stirring, etc.), we will analyze and evaluate the dynamic characteristics of ultrasound based on the nonlinear phenomena (results of bispectral analysis) of the target object (propagation of surface elastic waves) or the ultrasound propagating in the target liquid, which are the main factors of the ultrasonic effect. This analysis method is realized based on previous experience and achievements by adapting the dynamic characteristics of complex ultrasonic vibrations to the analysis methods of time series data. Note: The following tools will be used for the analysis. Note: OML Note: TIMSAC Note: "R," a free statistical processing language and environment.

• others

To stabilize the effects of cavitation, a statistical perspective is essential — a technology to optimize nonlinear ultrasonic phenomena according to specific purposes.

<Regarding the Creation of Logical Models> (Using Information Quantity Criteria) 1) Based on various fundamental technologies, clearly recognize the "information data group," DS = (D1, D2, D3), related to the subject, consisting of: D1 = Objective knowledge (theory supported by academic logic) D2 = Empirical knowledge (results obtained so far) D3 = Observational data (current state) and create multiple model proposals from its organizational use. 2) Understand statistical thinking as a method of realizing information acquisition through the composition of the information data group (DS) and the repeated proposal and verification of models based on it. 3) Determine the optimal model by comparing various models using evaluation methods such as AIC. 4) Construct ultrasonic devices and systems based on the created models. 5) Considering time and efficiency, the following responses are proposed: 5-1) Taking into account the "logical model creation matters," create "intuitive models" for multiple people to examine. 5-2) Modify and review the models based on actual data and new information. 5-3) Enter into specific discussions about devices and systems based on models that the review members can agree upon.

• Other analytical equipment
• Scientific Calculation and Simulation Software
• others

Technology to control low-frequency resonance phenomena and high-frequency nonlinear phenomena.

The Ultrasonic System Research Institute has developed technology to manufacture ultrasonic probes that can control ultrasonic propagation states from 500 Hz to over 500 MHz, tailored to specific applications. Ultrasonic Probe: Overview Specifications Measurement Range: 0.01 Hz to 200 MHz Oscillation Range: 1.0 kHz to 25 MHz Propagation Range: 0.5 kHz to over 900 MHz (confirmed through acoustic pressure data analysis) Materials: Stainless steel, LCP resin, silicon, Teflon, glass, etc. Oscillation Equipment: Example - Function Generator By understanding the acoustic properties of metals, resins, glass, etc., and through oscillation control, we achieve propagation states tailored to specific purposes regarding acoustic pressure levels, frequencies, and dynamic characteristics. This is a new foundational technology for precision cleaning, processing, stirring, and inspection based on measurement, analysis, and evaluation techniques for ultrasonic propagation states. By utilizing the acoustic properties of various materials, ultrasonic stimulation can be controlled for structures and machine tools weighing several tons, even in a 3000-liter water tank, with ultrasonic output below 20 W. It was developed as an application method for nonlinear phenomena through an engineering (experimental and technical) perspective on elastic waves and an abstract algebraic ultrasonic model.

• Water Treatment
• Other measuring instruments
• others

Surface inspection technology utilizing ultrasonic transmission and reception characteristics.

The Ultrasonic System Research Institute has developed a new surface inspection technology using megahertz ultrasonic oscillation based on its track record of analyzing ultrasonic data propagating on the surface of target objects. This method applies measurement and analysis technology for "sound pressure and vibration" controlled by ultrasonic probe oscillation. We provide consulting and evaluation technology explanations tailored to the development of ultrasonic probes that match the target object's surface vibration modes. This is an application of new ultrasonic oscillation control technology. By utilizing nonlinear phenomena related to megahertz ultrasonic propagation states that correspond to the acoustic characteristics of the target object, it is possible to detect new features regarding the surface condition of the target object. In particular, by utilizing response characteristics from combinations of oscillation and reception, this fundamental technology serves as a new evaluation parameter for surface inspection of substrate components and pre-evaluation of precision cleaning parts. By measuring, analyzing, and evaluating the dynamic characteristics of ultrasonic waves related to the propagation phenomena of surface elastic waves, we have enabled effective use tailored to the objectives (evaluation) by constructing and modifying logical models.

• Non-destructive testing
• Other measuring instruments
• others

Technology for Controlling Nonlinear Phenomena of Ultrasound

The Ultrasonic System Research Institute has developed a technology to control the nonlinear phenomena of surface elastic waves (ultrasonic vibrations) that propagate through the target object, using an original ultrasonic system (sound pressure measurement analysis, oscillation control). << Technology to Control Nonlinear Phenomena of Ultrasound >> 1) A control setting technology that adjusts the oscillation output, waveform, and variations of the oscillation control using a function generator to match the acoustic characteristics of the target object. 2) Manufacturing technology for ultrasonic oscillation control probes that enable control of changes in ultrasonic oscillation voltage, including adjustments to the oscillation surface. 3) Manufacturing technology for ultrasonic measurement probes that make it possible to measure changes in ultrasonic vibrations at 100 megahertz, including adjustments to the oscillation surface. 4) Optimization technology for sweep oscillation conditions. Using the above technologies, we control (optimize) the propagation state of ultrasound according to the intended purpose. Note: Based on the analysis and evaluation of sound pressure data related to nonlinear phenomena concerning the interaction between the acoustic characteristics of the target object and ultrasonic oscillation control, we perform dynamic control of ultrasound (measurements, analysis, confirmation, and evaluation of sound pressure are conducted using an ultrasonic tester).

• Non-destructive testing
• Vibration and Sound Level Meter
• others

Development technology for dynamic control systems using ultrasound.

The Ultrasonic System Research Institute has developed a new nonlinear sweep oscillation control technology for ultrasound, utilizing the nonlinear vibration phenomena of surface elastic waves. Regarding complex vibration states: 1) Linear phenomena and nonlinear phenomena 2) Interactions and the acoustic characteristics of various components 3) Sound, ultrasound, and surface elastic waves 4) Low frequency and high frequency (harmonics and subharmonics) 5) Oscillation waveform and output balance 6) Oscillation control and resonance phenomena ... Based on the above, we optimize a new evaluation method for surface elastic waves using a statistical mathematical model based on sound pressure measurement data. Ultrasonic cleaning, processing, stirring, ... surface inspection, ... nanotechnology, ... applied research ... various responses are possible. Propagation characteristics of ultrasound: 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response characteristics) 4) Detection of interactions (analysis of power contribution rates) Note: "R" is a free statistical processing language and environment. autcor: autocorrelation analysis function bispec: bispectrum analysis function mulmar: impulse response analysis function

• Water Treatment
• Analysis and prediction system
• others

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, or management: Are you facing any challenges with current issues or selecting the right sensors for parking management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Vehicle Detection Sensor Basic Guide This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document presents the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

The Spain International Energy and Environment Exhibition (Genera 2025) successfully concluded at the IFEMA exhibition center in Madrid from November 18 to 20, 2025. Grace Solar showcased solar mounting solutions suitable for all scenarios at booth H3D01 and discussed new opportunities in the green transition with energy industry professionals from Europe and around the world. Smart Tracking This system optimizes the angle of solar panels in real-time using intelligent algorithms, making it particularly suitable for high solar radiation areas and complex terrains, such as southern Spain, significantly improving power generation efficiency. Ground-mounted Systems To accommodate the diverse geographical environments of Europe, Grace Solar's ground-mounted systems garnered attention for their exceptional stability and adaptability. Roof-mounted Solutions At the exhibition, Grace Solar's roof-mounted mounting solutions attracted attention for their flexible adaptability. They cater to the complex roof types found in Europe, providing a variety of installation solutions that balance structural safety and ease of installation.

Caught up in daily input, approval, and checks, I want to improve but can't find the time to consider it. In back offices, which tend to fall into such a "negative loop," it's understood that system implementation can be a breakthrough, but the burden of the implementation itself is often significant, leading to new sources of concern. During the consideration phase, it takes time to request materials and compare demos, and even if the differences are clear, there is no certainty about whether it will fit the company. After implementation, issues often arise in operations, such as not being able to connect to support or having multiple inquiry points that cause confusion. Therefore, while organizing common failure cases, we have summarized key points for practical staff to proceed with a selection that is "smooth," "thorough," and "without regret." Common failure case 1: The purpose is vague, and "systematization" becomes the goal. Common failure case 2: It does not match the company's operations. Common failure case 3: Realizing it is "difficult" after starting to use it. Common failure case 4: Total costs balloon. You can read more without needing to input personal information. Please visit the iBusiness Partners column page! https://ibp-column.sfsite.me/33868

Based on practical experience in support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer attraction mainly in the BtoB (business-to-business) sector. On November 20, 2025 (Thursday), they published a page titled "Empathetic Shame: Feeling Embarrassed for Others!?" Empathetic shame is when one perceives another's embarrassing situation as if it were their own, leading them to feel embarrassment themselves. The page explains examples of its occurrence in daily life and business scenes, the causes behind it, and methods for "dealing with it effectively." (Page Overview: Excerpts) ■ What is "Empathetic Shame"? ■ Examples of "Empathetic Shame" ■ Benefits of feeling "Empathetic Shame" ■ Causes of "Empathetic Shame" ■ Methods for "dealing with" "Empathetic Shame" (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/vicarious-shame-2025-11/

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors notify wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.