Ultrasonic sound pressure measurement analysis system "Ultrasonic Tester NA"

Based on sound pressure measurement analysis, ultrasonic optimization technology allows for the efficient and stable use of ultrasound tailored to specific purposes.

The Ultrasonic System Research Institute has developed a technology that utilizes "ultrasonic transducers" of multiple different frequencies. This technology, in addition to standing wave control technology, adjusts the output of each ultrasonic transducer to vary the nonlinear effects of cavitation and acceleration according to specific purposes. By using ultrasonic transducers with a frequency of 40 kHz and an output of 50-600 W, it is possible to disperse a 1-millimeter diameter metal tube into a 1-micron state, as well as to clean it without causing damage. Through original measurement and analysis technology for ultrasonic propagation states, we are confirming various ultrasonic utilization technologies tailored to the unique characteristics of the transducers. This is a new ultrasonic technology that, including the general effects of ultrasonic dynamic characteristics, can be utilized and developed as a distinctive operational technology for the development of new materials, stirring, dispersion, cleaning, chemical reaction experiments, and more. Ultrasonic propagation characteristics: 1) Vibration modes (changes in self-correlation) 2) Nonlinear phenomena (changes in bispectrum) 3) Response characteristics (analysis of impulse response) 4) Interactions (analysis of power contribution rates)

• pump

Design, development, manufacturing, and technology of ultrasonic equipment tailored to specific purposes based on the measurement and analysis of ultrasonic vibrations—aging treatment of ultrasonic equipment.

Development of a Dedicated Ultrasonic Tank The Ultrasonic System Research Institute has developed a dedicated ultrasonic tank by applying measurement technology related to the propagation state of ultrasound. As a result of using the newly developed dedicated ultrasonic tank for ultrasonic cleaning and surface modification, it has become easier to control not only the utilization efficiency of ultrasound but also the propagation states of cavitation and acceleration. This represents a completely new manufacturing technology (Note) for tanks and surface treatment technology, and it has been confirmed to be a significant achievement through measurement and analysis of the states. Note: Original design, manufacturing, and adjustment methods. This method and technical know-how are offered as part of our consulting services. Ultrasonic Propagation Characteristics 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates) Note: "R" is a free statistical processing language and environment. autcor: autocorrelation analysis function bispec: bispectrum analysis function mulmar: impulse response mulnos: power contribution rate

• pump
• Other measuring instruments
• others

A megahertz ultrasonic oscillation control probe that enables the utilization of ultrasonic propagation conditions from 1 to 900 MHz.

The Ultrasonic System Research Institute has developed a megahertz ultrasonic oscillation control probe that enables the utilization of ultrasonic propagation states from 1 to 900 MHz by combining it with a function generator for controlling ultrasonic propagation states. This is a new application technology based on measurement, analysis, and evaluation techniques of ultrasonic propagation states for precision cleaning, processing, stirring, and inspection. By utilizing the acoustic properties (surface elastic waves) of various materials, ultrasonic stimulation can be controlled for structures and machine tools weighing several tons, even in a 3000-liter water tank, with ultrasonic output below 20W. It was developed as an application method for nonlinear phenomena through an engineering (experimental and technical) perspective on elastic waves and an abstract algebraic ultrasonic model. The key point is the technology for utilizing surface elastic waves on the surface of ultrasonic elements. By confirming the propagation characteristics of ultrasonic waves depending on the conditions of the target object, it is important to address it as an original nonlinear resonance phenomenon. Note 1: Propagation characteristics of ultrasonic waves include nonlinear characteristics, response characteristics, fluctuation characteristics, and effects due to interactions.

• pump
• Other measuring instruments
• others

We will disclose the manufacturing know-how of ultrasonic probes - applying feedback analysis technology, ultrasonic sound pressure data analysis technology.

The Ultrasonic System Research Institute manufactures and sells the "Ultrasonic Tester NA (Recommended Type)," which makes ultrasonic measurement and analysis easy. We provide manufacturing technology and data analysis evaluation technology, including know-how for this system. System Overview (Recommended System: Ultrasonic Tester NA) Contents: - One dedicated probe for measuring sound pressure of ultrasonic cleaners - One general-purpose ultrasonic measurement probe - One oscilloscope set - One set of analysis software, manuals, and various installation sets Features: - Measurement (analysis) frequency range: Specification from 0.1 Hz to 10 MHz - Ultrasonic oscillation: Specification from 1 Hz to 100 kHz - Capable of measuring surface vibrations - Continuous measurement for 24 hours - Simultaneous measurement of any two points - Measurement results displayed in graphs - Analysis software for time-series data included This is a measurement system using ultrasonic probes. The ultrasonic probe is attached to the target object for oscillation and measurement. The measured data is analyzed considering position, state, and elastic waves, detecting various acoustic performances.

• Water Treatment
• Measurement and analysis equipment leasing and rental
• others

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

A truck berth is a space in a logistics warehouse where trucks can be parked to load and unload goods. By installing sensors in the truck berth to display the occupancy status, it is possible to quickly guide trucks to available spaces. Additionally, sharing the occupancy status with warehouse workers allows for a swift start to loading and unloading, improving overall productivity and reducing truck waiting times. 【Target Products】 - Occupancy detection sensor HM-UX2/UW2 (ceiling-mounted, ultrasonic type) ■ Benefits of Implementation Benefit 1: The HM-UX2 can be installed at high positions without height restrictions. Benefit 2: By setting the detection distance higher than a person's height, false detections caused by people are reduced. Benefit 3: The HM-UX2 is not affected by the floor surface, eliminating false detections caused by small stones or unevenness on the floor. Benefit 4: For locations with many parking spaces, the communication-type ultrasonic sensor HM-UW2 is recommended.

We have renewed our homepage. https://www.asu-maru.com/ English version https://www.asu-maru.com/english

Based on practical experience in both support companies and business companies, SBS Marketing Co., Ltd. provides consulting services related to marketing, sales promotion, and customer acquisition primarily in the BtoB (business-to-business) sector. On August 21, 2025 (Thursday), they published a page titled "Does 'Order' Affect Impressions?! 'Serial Position Effect'". When multiple pieces of information are presented in order, the middle information tends to be less memorable, while the 'first' and 'last' pieces of information are more likely to be retained in memory, known as the 'serial position effect'. The page explains the experimental content that proved this effect, the two theories that support it, examples of its occurrence in business contexts, and points to consider when utilizing it. (Page Overview: Excerpts) ■ What is the 'Serial Position Effect'? ■ Experiments that clarified the 'Serial Position Effect' ■ The two theories that explain the 'Serial Position Effect' ■ Examples of the 'Serial Position Effect' in business contexts ■ Cautions regarding the 'Serial Position Effect' (DL content only) ▼ For more details, please visit this page. https://sbsmarketing.co.jp/blog/serial-position-effect-2025-08/

Details of the FaceMe Security 8.3 Update < Revamped UX for Action & Alert Rule Settings > Previously, individual settings were required for each action even within the same rule. By completely overhauling the UI and UX, we have transformed the operation screen to allow for intuitive and efficient configuration. ▶ Key Update Points - Multiple actions (notifications, access control, VMS integration, etc.) can now be set within a single rule. - The settings screen has been consolidated into a single page, allowing for an overview and editing of the entire configuration at a glance. < Enhanced Integration Features with Face Terminal (Facial Recognition Terminal) > FaceMe Security integrates with the MSK Knoctoi series (Standard/Lite), enabling door opening and closing based on facial recognition results without the need for additional devices. This update allows for detailed configuration of door opening and closing rules based on location, time of day, and groups of individuals, enabling more flexible access management tailored to on-site operations. ▶ Expected Implementation Scenarios - All employees can enter the entrance, while only administrators can enter specific areas at night, etc.