We will be exhibiting at the Sewer Expo '24 Tokyo. From July 30 to August 2, 2024, at Tokyo Big Sight.

A static mixer that can stir using only an inline plate. Suitable for the stirring and mixing of coagulants in individual liquid separation. *We will be exhibiting at the Sewerage Expo '24 Tokyo.

The J.M.S. Static Mixer 2800 is a revolutionary inline mixer that mixes with just one plate. Its simple design makes installation and cleaning easy. When used for injecting coagulants for liquid separation, it enhances the efficiency of separators and contributes to energy savings in factory plants. Additionally, it can be easily utilized by simply installing the plate in the piping like an orifice, allowing for easy installation and minimizing installation costs. 【Features】 ■ Contributes to the efficiency of separators ■ Easy to install ■ Installation costs can be minimized *For more details, please download the PDF or contact us.

• pump

Removal efficiency of corrosive gases is over 95%! It reduces maintenance frequency and prevents major damage to control equipment in advance. *We will be exhibiting at the Sewerage Expo '24 Tokyo.

◆It is effective for maintaining control panel equipment! You can reduce the frequency of maintenance!◆ It protects independently installed control panels and operation panels from internal corrosion caused by corrosive gases, preventing various losses due to troubles with control and electrical equipment inside the panel. Additionally, it can be adapted to control panels installed in various locations, such as those outside the instrument room or in areas where corrosive gases are present. 【Features】 ■Removal speed: approximately 0.0PPm (hydrogen sulfide) in about 400 seconds from 2.0PPm ■Removal efficiency of over 95% (due to the airtightness of the control panel) ■Three types of MODELS available according to installation space ■Adsorbent modules are environmentally friendly and made from recycled paper *For more details, please check the request for materials or download the catalog.

• Air conditioning equipment

We conducted a mixing comparison test using plate-type (2800 series) and screw-type (Kenics type) MSE static mixers.

The Saeki-Kaide Laboratory of the Graduate School of Science and Technology at Yamaguchi University conducted stirring experiments with various static mixers. Targets: - JMS Corporation's plate-type 2800 mixer - Kenix-type static mixer (screw type) - MSE static mixer (grid type) As a result, it was confirmed that the JMS Corporation's plate-type 2800 mixer has stirring performance and pressure loss equivalent to that of the Kenix type. The plate-type mixer can stir with just one plate, making its structure simple and cost-effective. Maintenance tasks such as cleaning are also easy, allowing for minimal investment and running costs.

• Water Treatment

An inline mixer that can stir using only an inline plate. Ideal for mixing sodium hypochlorite and for stirring and mixing during chemical dosing neutralization.

The JEMS Static Mixer 2800 is a revolutionary inline mixer that mixes with just one plate. Its simple design makes installation and cleaning easy. By simply installing the Static Mixer 2800 in the piping like an orifice plate, mixing is achieved solely by the fluid's force within the pipe. Additionally, since only a plate needs to be installed in the piping, installation is straightforward and costs can be minimized. By adopting the JEMS Static Mixer 2800, it is possible to easily and cost-effectively improve energy efficiency and operational efficiency in factories and plants.

• Geothermal Power Generation

Measures against corrosive gases (hydrogen sulfide gas) generated from the wastewater treatment facility were implemented. This eliminated failures in control equipment and contributed to improving the factory's operating rate.

Hydrogen sulfide gas is generated in the wastewater treatment process of meat processing plants. Even at gas concentrations of a few ppb (1/1000 of ppm), this hydrogen sulfide gas can have a significant impact on equipment. The contact points of the equipment in the wastewater treatment facility can corrode, leading to equipment failure. JMS Corporation provides comprehensive support from the investigation of corrosive gases (hydrogen sulfide gas) to countermeasures. First, we conduct an investigation into the pathways and causes of hydrogen sulfide gas intrusion, as well as an environmental risk analysis. After the investigation, we will propose the most suitable environmental improvements tailored to your site.

• Septic tank equipment

To prevent clogging of the measurement holes, which is a weakness of the Pitot tube, continuous purging is performed during measurement to prevent blockages. It is optimal for measuring flow rate and flow velocity in large-diameter flues.

Flow measurement is one of the most important measurement items in the field of industrial measurement. When measuring the flow rate of fluids (liquids and gases), methods that utilize pressure differences before and after a restriction mechanism, such as orifices, flow nozzles, Venturi tubes, and Pitot tubes, are most commonly used in industrial measurement and its automatic control. Accurate and reliable flow measurement leads to effective plant operation, efficient energy use, environmental conservation, improved safety, and overall cost reduction. The specialized technology for selecting and installing flow meters ensures smooth plant operation and prevents unexpected shutdowns and troubles. JMS Co., Ltd. provides a comprehensive service from planning, development, design, manufacturing, to maintenance as a specialized manufacturer of polynomial Pitot tubes.

• Thermal power generation

It is ideal for process improvement in the carbon dioxide mixing line of the lime factory. It allows for stirring without using power, enabling energy conservation and efficiency in the production line.

This is an inline mixer that performs stirring with a single plate. By simply installing the mixer plate in the piping, stirring can be carried out within the piping. It is used for mixing carbon dioxide with lime, among other applications.

• Fuel Cells

It is a differential pressure flow and velocity sensor, a porous pitot tube "Barflow Tube." Compared to orifice flow meters, it allows for low pressure loss and energy-saving measures.

Flow measurement is one of the most important aspects in the field of industrial measurement. When measuring the flow rate of fluids (liquids and gases), methods that utilize pressure differences before and after a constriction mechanism, such as orifice plates, flow nozzles, Venturi tubes, and Pitot tubes, installed in the piping where the fluid flows, are the most commonly used in today's industrial flow measurement and its automatic control. Accurate and reliable flow measurement leads to effective plant operation, efficient energy use, environmental conservation, improved safety, and reduced overall costs. The specialized technology for selecting and installing flow meters ensures smooth plant operation and prevents unexpected shutdowns and troubles. JMS Co., Ltd. provides a comprehensive service from planning, development, design, manufacturing, to maintenance as a specialized manufacturer of polynomial Pitot tubes. We have a cumulative shipment record of over 10,000 units.

• Thermal power generation

We have extensive experience in measuring exhaust gas flow across the country. We can also accommodate special materials such as SUS310, Hastelloy, and titanium, in addition to SUS316.

By simply inserting a porous pitot tube into the flue, it is possible to measure the flow rate and velocity of exhaust gases within the duct. Therefore, it enables low-cost measurement of exhaust gas flow rate and velocity without the need for extensive construction. The pitot tube has lower pressure loss compared to orifices and venturi meters, contributing to energy-saving operations throughout the plant. Our pitot tube flow meter, the Bar Flow Tube, is produced under a fully integrated system within our own factory, covering planning, design, procurement, manufacturing, inspection, and maintenance. We have established a management system that ensures customer satisfaction. We aim for the adoption of our Bar Flow Tube to assist in improving your processes.

• Ventilation and smoke exhaust equipment

Remote monitoring of low concentrations of hydrogen sulfide gas can be performed. Data can be checked on a browser. When the gas concentration rises, an alarm will be issued via Line.

This is a gas concentration meter with a logger that monitors low-concentration hydrogen sulfide gas wirelessly. Since it is specialized for low concentrations, it is effective for odor monitoring and tracking of corrosive gases. Hydrogen sulfide gas is rarely constant; it can rapidly increase in concentration within a short period due to wind direction and site conditions. Without continuous gas observation, it is very difficult to detect an increase in gas concentration. By installing our wireless low-concentration hydrogen sulfide gas concentration meter, continuous monitoring can be conducted, allowing for the capture of events related to gas concentration increases.

• Gas leak device

Investigate the corrosive gases (hydrogen sulfide gas) generated in the sulfurization process, diagnose the risks, and prevent equipment failures with gas removal systems to improve operational efficiency.

Hydrogen sulfide gas is generated during the vulcanization process at tire factories. The hydrogen sulfide gas produced is at a low concentration of several tens of ppb, which does not affect the human body. The occupational safety standard for gas concentration is 10 ppm, so the concentration of hydrogen sulfide gas is about 1/1000 of that. However, even at several tens of ppb, hydrogen sulfide gas can have a significant impact on machinery. It can cause corrosion, leading to failures in the contact points of machines. Additionally, corrosion can change the resistance value of chip resistors, affecting the operation of control devices, as reported in various cases. JM Solutions Co., Ltd. provides comprehensive support from investigation to countermeasures for hydrogen sulfide gas. First, we conduct an investigation into the pathways and causes of hydrogen sulfide gas intrusion, as well as an environmental risk analysis. After the investigation, we will propose the most suitable environmental improvements tailored to your site. [Advertisement] We will be demonstrating our Coro Shooter at INCHEM TOKYO 2023. https://www.jma.or.jp/INCHEM/ We look forward to your visit. Date: September 20-22, 2023 Venue: Tokyo Big Sight Booth Number: 2X07

• Monitoring and Control Equipment

This is a device that generates calibration gas used for the calibration work of gas detectors. It is compatible with NIST traceability.

Calibration gas is generated without using gas cylinders. It is ideal for calibrating gas detectors. Since gas cylinders are not required, the hassle of managing high-pressure gas cylinders is eliminated. The device is also compact and lightweight, making field calibration of gas detectors easier. If you replace the gas generation cell, it is possible to generate H2, CL2, CLO2, HCN, and H2S gases at your desired gas concentration. We can also accommodate CLO2 and HCN, which are difficult to procure with gas cylinders. If you adjust the desired gas concentration and generation flow rate, calibration gas will be generated.

• Environmental Survey
• Other measuring instruments
• Measurement and analysis equipment leasing and rental

Remove hydrogen sulfide gas in one shot. We protect equipment by removing hydrogen sulfide gas generated from vulcanization in tire and rubber factories.

Hydrogen sulfide gas is a highly corrosive and harmful gas. Exposure to hydrogen sulfide gas can cause corrosion (rust) on the copper and silver parts of equipment, leading to equipment failure. The Coro Shooter removes hydrogen sulfide gas and prevents equipment failure due to corrosion. In the vulcanization process at tire and rubber factories, trace amounts of hydrogen sulfide gas are generated. Although these trace amounts of hydrogen sulfide gas do not affect human health, the impact on equipment is significant. Even hydrogen sulfide gas at levels of several tens of ppb can cause equipment failure due to corrosion. By installing the Coro Shooter inside the control panel where the equipment is housed, you can purify the air within the panel and prevent equipment failure caused by hydrogen sulfide gas. Since it can be installed simply within the panel, it is possible to implement measures against hydrogen sulfide gas easily and at low cost. [Advertisement] We will be demonstrating the Coro Shooter at INCHEM TOKYO 2023. https://www.jma.or.jp/INCHEM/ We look forward to your visit. Date: 2023/9/20-22 Venue: Tokyo Big Sight Booth Number: 2X07

• Drainage and ventilation equipment
• Picking robots (shelf transport robots, arm picking robots)
• Other power generation

It is a chemical adsorbent that can remove ammonia gas through a chemical reaction. It is ideal for interference gas measures against ammonia in gas analyzers.

It is a chemical adsorbent that removes ammonia gas through a chemical reaction. Since it removes gas through chemical adsorption, there is no re-release of the gas, making it possible to reliably eliminate ammonia gas.

• Environmental Survey
• Other analytical equipment
• Fuel Cells

It is a portable calibration gas generator. Since it can generate gas on-site, it is ideal for maintaining gas detectors.

Since gas cylinders will no longer be needed, the cumbersome management of cylinders will not be necessary. We also accommodate gas types that cannot be provided by gas cylinders, such as hydrogen cyanide (HCN) and chlorine dioxide (ClO2). By replacing the gas cell, it is possible to generate a variety of gases.

• Ventilation and smoke exhaust equipment
• Other measuring instruments
• Measurement and Analysis Equipment

The equipment failure at the wastewater treatment facility may be caused by hydrogen sulfide gas. We will conduct a site investigation for the invisible hydrogen sulfide gas and assist with countermeasures.

Hydrogen sulfide gas is a highly corrosive and harmful gas. Exposure to hydrogen sulfide gas can cause corrosion (rust) on the copper and silver parts of equipment, leading to equipment failure. Even in trace amounts, hydrogen sulfide gas may not affect human health, but its impact on equipment is significant. Even hydrogen sulfide gas at concentrations of several tens of ppb can cause failures due to corrosion of equipment. Hydrogen sulfide gas generated in wastewater treatment can infiltrate control equipment through pipes and cables. Low-concentration hydrogen sulfide gas floats within factories, and visualizing this invisible gas is very challenging. JMMS Co., Ltd. acts as an expert in hydrogen sulfide gas, providing visualization of hydrogen sulfide gas and assisting in process improvement.

• Waste treatment facility

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing with only the CPU. It ensures stable authentication without delays even during peak times, such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000. It can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

The receiver section of the radio is designed to receive signals properly even when influenced by other radios used in the world, and standards have been established for this purpose, requiring designs that comply with these standards. This time, I will briefly discuss the wireless standards for the receiver section! 【Contents】 ■ Minimum reception sensitivity ■ Adjacent channel selectivity ■ Receiver intermodulation ■ Spurious response ■ Harmonic emission * For more details, please refer to the PDF document or feel free to contact us.

Nihon Jitsugyo Co., Ltd. will exhibit at the "7th Kansai Logistics Exhibition KANSAI LOGIX2026," which will be held from April 8 (Wednesday) to April 10 (Friday), 2026. On that day, we will showcase products that contribute to heatstroke prevention in warehouses and factories in preparation for the upcoming summer heat. You will be able to experience the actual products at our booth, so please stop by. 【Exhibition Overview】 Exhibition Name: 7th Kansai Logistics Exhibition KANSAI LOGIX2026 Dates: April 8 (Wednesday) to April 10 (Friday), 2026 Venue: Intex Osaka Booth Number: C2-02 【Exhibited Products】 - COOL FAN SPOT mini Hieppi - COOL FAN Series - ECO FAN Series *There will also be new products making their debut at the exhibition!