Started listing our handled products in the metrics for comparing industrial product manufacturers.

The noise level is reduced by about 60%! This air nozzle can be used not only in general industries but also in food service and healthcare.

Lechler multi-channel jet (air nozzle) A new low-noise flat jet nozzle has been introduced for the multi-channel jet! When replaced with a 4mm pipe, the noise level is reduced by approximately 60%. Air consumption can also be reduced by about 33%. The new air nozzle 'FL-600SY' is suitable for draining water, blowing away debris, and drying in very tight spaces with flat air. By using SUS-316L material, it has become a product that can be used not only in general industry but also in food service and medical applications. ◆ For product details, please refer to the catalog or contact us. *Lechler GmbH is a German spray nozzle manufacturer.

• Conveyor

Freely and precisely fixed to the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired location for blowing freely and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with the FL-600H multi-channel jet (air nozzle). * The current model has an orange tip on the flexible hose and a dark blue body. * The screw standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Freely and precisely fixed to the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired blowing area and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with a multi-channel jet (air nozzle) FL-600E. * The current model has an orange tip on the flexible hose and a dark blue connector. * The screw standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Freely and precisely fixed to the blow area.

Multi-channel jet (flex hose) Material: Polyacetal resin The flex hose, which can be fixed to any desired blowing location, can be used over a wide temperature range from -30°C to 80°C. Dedicated flex hose for Lechler's multi-channel jet (air nozzle) Can be connected with 1/4" male thread. *Lechler GmbH is a German spray nozzle manufacturer. *The current product has an orange tip and a dark blue body. *The thread standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Best-selling Rehiller Company air nozzle FL-600E's sister product, ultra-compact round type, made of stainless steel SUS316L (5mm type).

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only allows for powerful impact force but also reduces noise levels. Additionally, by utilizing laminar flow, the amount of air consumption can be minimized. In other words, it is an energy-saving product. The blow pattern is straight (7mm width). *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Best-selling Rehiller Company air nozzle FL-600E's sister product, ultra-compact round type, made of stainless steel SUS316L (4mm type).

Rehira's multi-channel jet (air nozzle) allows for a laminar airflow, which not only provides powerful impact force but also reduces noise levels. Additionally, by utilizing laminar flow, the amount of air consumption can be minimized. In other words, it is an energy-saving product. The blow pattern is straight (7mm width).

• others

Best-selling air nozzle by Rehiller, FL-600E's sister product, small round type.

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only provides powerful impact force but also reduces noise levels. Additionally, by maintaining laminar flow, the amount of air consumption can be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Best-selling air nozzle FL-600E by Rehiller, sister product, round type, made of zinc material.

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by achieving laminar flow, the amount of air consumed during use can also be reduced. In other words, it is an energy-saving product. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Best-selling Rehiller air nozzle FL-600E's sister product, round type.

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by achieving laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Sister product of the best-selling Rehiller air nozzle FL-600E, offered in stainless steel 316L, wide type FL-600ST.

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by achieving laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. The multi-channel jet model FL-600STW generates a very wide and powerful impact force. This nozzle is made of stainless steel 316L, allowing it to be used in high-temperature environments. The protruding tip of the nozzle prevents air from penetrating human skin. This nozzle complies with OSHA standards. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Best-selling Rehiller Company Air Nozzle Multi-Channel Jet Series Flat Type Extra Large

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by achieving laminar flow, the amount of air consumption can also be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Best-selling Rehiller Company Air Nozzle Multi-Channel Jet Series Flat Type Outlet Two-Phase Type (FL-600FK Sister Product)

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by achieving laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Best-selling Rehiller Company Air Nozzle Multi-Channel Jet Series Flat Type

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by achieving laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Best-selling Rehiller Company air nozzle FL-600E's sister product, super large round type.

Rehira's multi-channel jet (air nozzle) allows the air to flow in a laminar manner, enabling not only powerful impact force but also a reduction in noise levels. Additionally, by maintaining laminar flow, it is possible to reduce the amount of air consumed during use. In other words, it is an energy-saving product.

• others

Best-selling Rehiller Company Air Nozzle Multi-Channel Jet Series Flat Type

Rehira's multi-channel jet (air nozzle) allows for laminar flow of the expelled air, which not only minimizes impact force but also reduces noise levels. Additionally, by maintaining laminar flow, it is possible to decrease the amount of air consumed. In other words, it is an energy-saving product.

• others

Sister product of the bestselling Rehiller air nozzle FL-600E, offered in stainless steel 316L.

Multi-channel jet (air nozzle) manufactured by Lehira The air ejected is laminar, which allows for minimal impact force and reduces noise levels. Additionally, by maintaining laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. This is an air nozzle made of stainless steel 316L, a sister product of the FL-600E. Being made of stainless steel allows for use in high-temperature environments while providing a powerful impact force.

• others

Sister product of the bestselling Rehiller air nozzle FL-600E, made of PP material.

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by achieving laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German nozzle manufacturer.*

• others

Sister product of the bestselling Rehiller air nozzle FL-600E, a type with half the spray width.

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by achieving laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Sister product of the best-selling Rehiller air nozzle FL-600E, offered in aluminum material.

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by maintaining laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German spray nozzle manufacturer.*

• others

Sister product of the best-selling Rehiller air nozzle FL-600E, offered in POM without pigments.

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by achieving laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. *Lechler GmbH is a German nozzle manufacturer.*

• others

World's No. 1, air nozzle with orifice cover. An air nozzle that achieves strong impact force with laminar flow. One of the best-selling products.

Rehiler Multi-Channel Jet (Air Nozzle) ≪Product Features≫ The air emitted is laminar (a well-structured airflow), which not only minimizes impact force but also reduces noise levels. Additionally, by maintaining laminar flow, the amount of air consumed is minimized, and even when pressure is lowered, the impact force does not decrease. In other words, this product contributes to energy savings and noise reduction. The blow pattern is straight (47mm width). ≪Significant Differences from Other Products≫ This product comes with an orifice cover (discharge hole adjustment plug). By using the orifice cover, it is possible to adjust the necessary air holes and suppress unnecessary air, making it a world-class product. ≪≪For Energy Savings, High Efficiency, and Solving Noise Issues!≫≫ - Is the impact force sufficient? - Have you resolved the noise issues generated by the air nozzle? - Is the material suitable for use in food, medical, and pharmaceutical applications? The Rehiler Multi-Channel Jet is here to solve such concerns. Only Rehiler provides a catalog that includes impact force, noise levels, air consumption (energy-saving measures), and blow patterns!

• others

What is "one stone three birds"?! It refers to an air nozzle that, while being low noise (quiet) and reducing air consumption (energy-saving), also has a strong impact force (high functionality).

Air nozzle created by a long-established European manufacturer. Only Lechler provides information in their catalog on impact force, noise level, air consumption (energy-saving measures), and blow patterns! In various industries, air plays an extremely important role in processes such as drying, cooling, conveying, blowing off, cleaning, mixing, and opening packaging bags. There is no doubt that the use of air contributes to improving the economic efficiency of production processes, and its applications still have no limits. However, air production incurs significant costs, and during use, it generates high-frequency noise that adversely affects the hearing of workers. Therefore, air nozzles that consume as little air as possible and operate at low noise levels are required. Lechler will solve this problem by leveraging all of its accumulated nozzle technology, years of experience, and proven track record. ■□━━━━━━━━━━━━━━━━━・・・・・‥‥‥……… For details on each product, please download the catalog or feel free to contact us. ・・・・・‥‥‥………━━━━━━━━━━━━━━━━━■□ *Lechler GmbH is a German spray nozzle manufacturer.

• Conveyor

Best-selling Rehiller Co. air nozzle FL-600E's sister product, round type, offered in brass.

Rehira Multi-Channel Jet (Air Nozzle) Material: Brass Impact Force: 2.1N @ 0.2MPa Noise Level: 79 dB (A) @ 0.2MPa Flow Rate: 18N?/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 200℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single-port nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

• others

Freely and easily fixed to the blow area in a pinpoint manner.

Multi-channel jet (flexible hose) Material: Polyacetal resin The flexible hose can be fixed to the desired blowing location freely and can be used over a wide temperature range from -30°C to 80°C. Dedicated flexible hose for Lechler's multi-channel jet (air nozzle) Can be connected with 1/4" male thread. *Lechler GmbH is a German spray nozzle manufacturer. *The current product has an orange tip and a dark blue body. *The thread standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Fixed precisely at the blow area freely and easily.

Multi-channel jet (flexible hose) Material: Polyacetal resin The flexible hose can be fixed to the desired blowing area freely and can be used over a wide temperature range from -30°C to 80°C. Dedicated flexible hose for Lechler's multi-channel jet (air nozzle) Can be connected with 1/4" male thread. *Lechler GmbH is a German spray nozzle manufacturer. *The current product has an orange tip and a dark blue body. *The thread standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Freely and precisely fixed to the blow area.

Multi-channel jet (flexible hose) Material: Polyacetal resin The flexible hose can be fixed to any desired location for blowing freely and can be used over a wide temperature range from -30°C to 80°C. Dedicated flexible hose for Lechler's multi-channel jet (air nozzle) Can be connected to 1/4" male thread. *Lechler GmbH is a German spray nozzle manufacturer. *The current product has an orange tip and a dark blue body. *The thread standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Freely and precisely fixed to the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired area for blowing freely and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with a multi-channel jet (air nozzle) FL-600E. *The current model has an orange tip on the flexible hose and a dark blue connector. *The thread standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Freely and easily fixed to the blow area in a pinpoint manner.

Material: Polyacetal resin The flexible hose can be fixed to the desired area for blowing freely and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with the FL-600E multi-channel jet (air nozzle). * The current model has an orange tip on the flexible hose and a dark blue connector. * The thread standard on the piping connection side is PT (the nozzle connection side is PF).

• container

Freely and precisely fixed to the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired area for blowing freely and can be used over a wide temperature range of -30°C to 80°C. This product comes equipped with a multi-channel jet (air nozzle) FL-600E. *The current model has an orange tip on the flexible hose and a dark blue connector. *The thread standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Freely and precisely fixed to the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired area for blowing freely and can be used over a wide temperature range of -30°C to 80°C. This product comes equipped with the multi-channel jet (air nozzle) FL-600H. * The current model has an orange tip on the flexible hose and a dark blue body. * The screw standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Freely and easily fixed in a pinpoint manner at the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired area for blowing freely and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with the FL-600H multi-channel jet (air nozzle). * The current model has an orange tip on the flexible hose and a dark blue connector. * The thread standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Fixed precisely at the blow area freely and effortlessly.

Material: Polyacetal resin The flexible hose can be fixed to the desired area for blowing freely and can be used within a wide temperature range of -30°C to 80°C. This product comes equipped with the multi-channel jet (air nozzle) FL-600H. * The current model has an orange tip on the flexible hose and a dark blue body. * The screw standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Freely and easily fixed to the blow area in a pinpoint manner.

Material: Polyacetal resin The flexible hose can be fixed to the desired blowing area and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with the FL-600R multi-channel jet (air nozzle). * The current model has an orange tip on the flexible hose and a dark blue connector. * The screw standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Freely and precisely fixed to the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired blowing area and can be used over a wide temperature range of -30°C to 80°C. This product comes equipped with the FL-600R multi-channel jet (air nozzle). * The current model has an orange tip on the flexible hose and a dark blue connector. * The screw standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Freely and easily fixed in a pinpoint manner to the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired blowing area and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with the multi-channel jet (air nozzle) FL-600R. * The current model has an orange tip on the flexible hose and a dark blue connector. * The screw standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Freely and easily fixed in a pinpoint manner at the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired blowing area and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with the FL-600R multi-channel jet (air nozzle). * The current model has an orange tip on the flexible hose and a dark blue connector. * The thread standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Freely and easily fixed to the blow area in a pinpoint manner.

Material: Polyacetal resin The flexible hose can be fixed to the desired location for blowing freely and can be used over a wide temperature range of -30°C to 80°C. This product comes equipped with the multi-channel jet (air nozzle) FL-600M. * To attach the FL-600M to the flexible hose, a 1/8" PF female x 1/4" PF male fitting is required. * The current product has an orange tip on the flexible hose and a dark blue collar. * The thread standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Freely and precisely fixed to the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired area for blowing freely and can be used in a wide temperature range from -30°C to 80°C. This product comes equipped with the multi-channel jet (air nozzle) FL-600M. * To attach the FL-600M to the flexible hose, a 1/8" PF female x 1/4" PF male fitting is required. * The current model has an orange tip on the flexible hose and a dark blue body. * The thread standard on the piping connection side is PT (the nozzle connection side is PF).

• Conveyor

Freely and precisely fixed to the blow area.

Material: Polyacetal resin The flexible hose can be fixed to the desired blowing area and can be used in a wide temperature range from -30°C to 80°C. This product comes with the multi-channel jet (air nozzle) FL-600M pre-installed. * To attach the FL-600M to the flexible hose, a 1/8" PF female x 1/4" PF male fitting is required. * The current product has an orange tip on the flexible hose and a dark blue collar. * The thread standard on the piping connection side is PT. (The nozzle connection side is PF.)

• Conveyor

Cost reduction! A lineup of "low noise + energy-saving + high functionality" air nozzles approved by OSHA, FDA, and EC No. 1935/2004.

Only Reihler offers specifications for impact force, noise level, air consumption (energy-saving measures), and blow patterns in their catalog! In various industries, air plays an extremely important role in processes such as drying, cooling, conveying, blowing off, cleaning, mixing, and opening packaging bags. There is no doubt that the use of air contributes to improving the economic efficiency of production processes, and its applications still have no limits. However, air production incurs significant costs, and during use, it generates high-frequency noise that adversely affects workers' hearing. Therefore, air consumption must be minimized, and air nozzles are required to operate at low noise levels. Reihler will leverage all accumulated nozzle technology and years of experience and achievements to solve this problem. Additionally, we are always available for consultation for users who need solutions in special cases. Our products are also approved by OSHA, FDA, and (EC) no. 1935/2004. ■━━━━━━━━━━━━━━━━━ For detailed information on each product, please download the catalog or feel free to contact us. ━━━━━━━━━━━━━━━━━■

• Piping Equipment

A collaborative product of Lehira's nozzle technology and Sonosis's ultrasonic technology.

Particles (droplets) formed by the ultrasonic spray nozzle are broken up by the vibration of the piezo element. In other words, unlike pressurized systems, the particles do not have speed. As a result, they either fall naturally or become suspended due to the influence of wind. Therefore, carrier air is used to transport the formed particles for application.

• others

Atomize the coating liquid with piezo vibrations! Minimal splatter and rebound without pressure! Compatible with a wide range of flow rates.

The Sonia Corporation's "Ultrasonic Spray Nozzle" utilizes piezoelectric vibrations to agitate liquids, forming fine particles and spraying them. It can accommodate a wide range of liquid flow rates from 10 mL/min to 100 mL/min, and since it does not apply pressure to the liquid, it features minimal splatter and rebound. This eliminates waste of the applied liquid and removes the need for large booths. It is suitable for applications such as coating, humidifying, and disinfecting. 【Features】 - Resistant to clogging and high operational safety - Uniform ultrasonic atomization regardless of liquid flow rate - Low power consumption and inexpensive running costs - Available in two types: wide spray and narrow spray. ★We are currently offering demo units that you can try out!★

• others

A new challenge with the Sonia Corporation's low-flow ultrasonic spray nozzle!

Low Flow Ultrasonic Spray Nozzle (Atomizer) The low flow spray nozzle (atomizer) manufactured by Sonia is designed to apply droplets (particles) of various viscosities in micron and submicron sizes without over-applying them to small parts. The nozzle shape comes in two types: flat and wide nozzle tips. It is suitable for concentrated application using an ultrasonic spray nozzle and a pinpoint air transport device (custom order) or for transporting very small droplets (particles). These spray nozzles can be easily applied to applications requiring controlled coating and uniform films. The spray nozzle is lightweight and ideal for coating systems using robots. The main body of the spray nozzle is made of stainless steel. *Custom micro feed tubes are suitable for low flow application and are available in stainless steel or PTFE fluororesin. The spray nozzle can be equipped with a spray shaper for pinpoint spraying or a wider spray for better coating control. *Micro feed tubes are optional items.

• others

Flow spray of 2 mmlit/min or less is now possible!

【Sonaer】 Low flow spray nozzle manufactured by Sonia Corporation It can focus on small parts without waste by creating micron and submicron particles. There are two types of nozzles: flat and wide spray tips. These nozzles are ideal for pinpoint spray shaping, allowing for precise particle focus and minimizing solution waste. With these nozzles, coating control becomes possible, easily adapting to applications that require thin and uniform application. This nozzle is lightweight, making it attractive for use in robotic coating systems. The nozzle is available in a lightweight black aluminum case (custom-made) or a stainless steel case with a stainless steel inner feed tube. The micro feed tube can be used for microliter capacities and is available in stainless steel and PTFE. The nozzle can utilize a spray shaper for pinpoint spraying, providing better control over your coating applications.

• others

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing with only the CPU. It ensures stable authentication without delays even during peak times, such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000. It can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

On our company's website introducing vehicle detection sensors, you can easily find products that meet your needs from three categories: "Purpose of Use," "Location of Use," and "Product List." [Introduction to Vehicle Detection Sensors] The sensors detect the passage of vehicles and notify you with a rotating light or switch the display of parking availability. They contribute to safe driving within parking lots and smooth operational management. They are used in various areas, from coin-operated parking to large-scale parking lots. We will continue to improve our webpage to provide information about Hotron's "Vehicle Detection Sensors."

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.