フロロテクノロジー List of Products and Services

"FloroSurf" and "Mold Free" provide excellent non-stick release properties to metal surfaces when applied. Please try it when conventional release agents fail. 【Features】 ■ The fluororesin film reacts with the mold material and adheres strongly, allowing continuous release even when conventional release agents fail. ■ The film thickness is only a few nanometers, faithfully reproducing surface shapes at the nano and sub-micron level. ■ FloroSurf can be applied with a brush or spray gun, while Mold Free can be applied directly from an aerosol can. The application is completed in just 10 minutes at room temperature, eliminating the need for external processing like baked fluororesin. ■ There is no accumulation of dirt on the mold, nor transfer to the workpiece, making cleaning processes unnecessary. (Except for Mold Free MF-02S) ■ It is effective in improving resin flow. ■ There is no transfer of release agent components, so cleaning of molded products is unnecessary. ■ It is non-flammable, thus not classified as hazardous under fire safety laws. Additionally, it has low odor. There is also a water-based model available for VOC countermeasures. ■ There is no need to remove the film during mold reworking. ■ It is effective in reducing surface defects in extrusion molding.

• others

The fluorosurf FG-3650 series protective coating for electronic circuit boards is suitable for waterproofing and insulating protection of electronic components, as well as for moisture-proof and waterproof coating of mounted circuit boards. It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. Free samples are available upon request. 【Features】 ■ Four times the moisture resistance compared to urethane and acrylic-based moisture-proof coatings. ■ Being a thin film, it minimizes weight increase, making it suitable for lightweight devices such as mobile equipment. ■ Provides strong protection against acidic gases, saline solutions, and corrosive liquids, also offering rust prevention. ■ Non-flammable and low-odor, ensuring safe usage. There are no fire safety regulations. ■ Dries at room temperature, with a drying time of 5 seconds to 30 minutes. No heating is required. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The "Fluoro Surf FG-5093" is a fluorine-based dry mold release agent. It does not contain silicone, so it does not dirty the molded products, eliminating the need for cleaning. By applying it, the adhesion of the surface molding resin is reduced, and since it forms a thin film at the nanometer level, it exhibits excellent release properties even for complex and precise shapes, maintaining accurate surface precision. It demonstrates its effectiveness in cases where conventional release agents do not work well. It has excellent durability, with a proven track record of continuous release over thousands of shots, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ The release agent component reacts with the mold material to adhere strongly, allowing for continuous release. ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. ■ It can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing. ■ There is no need to remove the film during mold reworking. ■ There is no transfer of the release agent component, so cleaning of molded products is unnecessary. ■ It has low odor and is non-flammable, helping to maintain a good working environment. ■ It does not use PFAS regulated substances (such as PFOS, PFOA, PFHxS, etc.). *If you would like a free sample, please indicate "Sample Request" in your inquiry. (Corporate only)

• others

A high-performance release agent with proven results in various fields, the fluorine-based release agent "Fluorosurf" has been made into an aerosol. It can be easily applied on-site and exhibits excellent release properties after air-drying at room temperature. Additionally, it can be used as a substitute for release agents from other manufacturers that have been discontinued. Please note that this product does not contain regulated substances (PFOA, PFOS, PFHxS). *If you would like a sample for use, please indicate "Sample Request" in your inquiry. (This is limited to corporate clients. It cannot be used for applications involving food contact or medical purposes.)

• others

The current regulations regarding PFAS are as follows: Complete regulation: PFOS, PFOA, and precursors of PFHxS are subject to regulation for almost all applications. Planned regulation in Europe: PFHxA is prohibited for use in the following limited applications: textiles, leather, paper, food packaging, shoes, etc. For PFAS other than the above (organic fluorinated compounds), it has been considered that there are no impacts on the environment or human health in the past. There is no evidence that substances other than the currently regulated PFAS are harmful, and due to the significant impact on industries such as semiconductors and automobiles if regulations were to be imposed, regulation in Europe is currently under consideration. This regulation is expected to be reduced in the future, and the compounds and applications subject to regulation have not yet been determined. Some fluorochemical manufacturers have announced the discontinuation of their products; however, our products are currently not subject to regulation, so we do not plan to halt supply. If you are facing difficulties due to the discontinuation of product supplies such as release agents or water and oil repellents, we can provide information, suggestions, and samples of alternative products. Please feel free to contact us.

• others

The "FloroSurf FG-3650 Series" electronic substrate protective coating (conformal coating) has a proven track record in waterproofing and insulating protection for automotive substrates and electronic components, as well as in moisture-proof and waterproof coatings for mounted substrates. 【Performance Features】 ■ Higher moisture and waterproof properties compared to other resins! → Offers four times the moisture-proof performance compared to urethane and acrylic moisture-proof coatings at the same film thickness! It exhibits more than ten times the moisture-proof performance compared to silicone-based coatings. Minimizes weight increase due to the coating film, making it ideal for lightweight devices such as mobile equipment. ■ Resistant to acidic substances like lithium battery electrolytes! → Can protect substrates during electrolyte leakage, preventing fire accidents. ■ Provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also exhibiting rust prevention effects. ■ Unlike reactive coatings (silicone, UV acrylic, etc.) that leave unreacted components that can affect properties, this product does not retain unreacted components (low molecular compounds), ensuring stable electrical characteristics and preventing contact failures in electrical connections after application. ■ A model with fluorescent dye for application confirmation is also available. *Please contact us if you would like a free sample.

• others

The "Fluoro Surf FG-509X Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. When applied to the mold with a brush or spray and allowed to dry at room temperature for about 10 minutes, it reduces the adhesion of the surface molding resin, demonstrating excellent release properties. It is particularly effective in situations where conventional release agents do not work well. The film is at the nanometer level, allowing for accurate reproduction even on complex and precise surface shapes. It has excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Since the release agent components do not adhere to the molded products, cleaning is unnecessary. Additionally, regulated substances such as PFOS, PFOA, and PFHxS are not used. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release. ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. ■ Can be easily applied with a brush or spray gun, eliminating the need for outsourcing processing. ■ No need to remove the film during mold reworking. ■ No transfer of release agent components, making cleaning of molded products unnecessary. ■ Low odor and non-flammable, maintaining a good working environment and easy management.

• others

Fluorine coating agent "FluoroSurf," a water and oil repellent treatment agent, exhibits water and oil repellency through the fluororesin film formed on the surface, effectively repelling water and oil. It offers various benefits such as preventing the rise of grease, diffusion prevention, adhesion prevention, and dirt resistance. No regulated PFAS substances are used. 【Features】 ◯ Easy coating with a brush or immersion. Dries in 5 seconds to 15 minutes at room temperature. ◯ After drying, a fluororesin film is formed, demonstrating effectiveness in dirt resistance, water repellency, and moisture resistance. 【Effective for the following applications!】 ■ Water and oil repellent treatment for shoes and clothing = Waterproof spray concentrate… ■ Prevention of oil leakage from miniature motors and spindle motors ■ Waterproof and moisture protection coating for printed circuit boards ■ Coating for printed circuit boards resistant to lithium electrolyte ■ Improved release properties for resin and elastomer molding ■ Fingerprint adhesion prevention for displays and lenses ■ Resin flow stop for capacitor sealing ■ Reduction of reflected light in optical components ■ Binder for dry lubricants OEM supply for various applications is also available. *Free samples are currently available (limited to corporations; medical and food-contact applications are excluded).

• others

The fluorine coating agent "Fluorosurf" forms a fluororesin film at room temperature, exhibiting various benefits such as water and oil repellency, prevention of grease accumulation (diffusion), fingerprint adhesion prevention, dirt resistance, lubrication, and release properties. 【Features】 ◯ A special fluororesin is dissolved in a non-flammable fluorinated solvent to create a solution. ◯ Easy coating using a brush or immersion. It dries within 5 seconds to 15 minutes at room temperature. ◯ After drying, a transparent and thin fluororesin film is formed, demonstrating effectiveness in dirt resistance, water repellency, and moisture prevention. ◯ PFAS regulatory substances PFOS, PFOA, and PFHxS are not used at all. 【Effective for the following applications!】 ■ Prevention of metal sulfide and oxidation ■ Coating for resistance to lithium electrolyte ■ Release agent for molds in resin and elastomer molding ■ Prevention of fingerprint adhesion on displays and lenses ■ Prevention of oil leakage from miniature motors and spindle motors ■ Flow stop for sealing resins ■ Insulating moisture-proof coating for electrical circuits to prevent leaks *If you would like a free sample, please indicate "Sample Request" in your inquiry. *Please note that our products are industrial chemical products, and we cannot provide samples for personal use (in cases without corporate status), medical use, or applications involving contact with food.

• others

The fluorine coating agent "Fluorosurf" forms a transparent fluororesin film at room temperature, exhibiting various benefits such as acid protection, water and oil repellency, prevention of grease rise (diffusion), fingerprint adhesion prevention, anti-soiling, lubrication, and release properties. 【Effective for the following applications!】 ■ Prevention of metal sulfide and oxidation ■ Protection of metals and resins from acids generated in fuel cells and lithium batteries. ■ Rust prevention for metals around batteries ■ Coating resistant to lithium electrolyte ■ Fingerprint adhesion prevention for displays and lenses ■ Prevention of oil leakage from miniature motors and spindle motor bearings ■ Stopping the flow of sealing resin ■ Insulating and moisture-proof coating for electric circuits ■ Prevention of leaks in electric circuits ■ Release agent for molds used in resin and elastomer molding 【Features】 ◯ A special fluororesin is dissolved in a non-flammable fluorine-based solvent to create a solution. ◯ Easy coating by brushing or dipping. Dries in 5 seconds to 15 minutes at room temperature. ◯ After drying, a transparent thin film of fluororesin is formed, demonstrating effectiveness in anti-soiling, water repellency, moisture resistance, etc. 〇 No use of PFAS regulated substances such as PFOS, PFOA, or PFHxS. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

"FluoroSurf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molded molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily applied on the molding site using brushes or spray guns. * The release component reacts and bonds to the mold surface, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * When the release performance decreases, reapplication will restore its effectiveness. * By applying it to the nozzle of extrusion molds, it can also reduce streaking. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the regulations stipulated by fire and safety laws. * The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * If you would like a free sample, please include "Sample Request" in your inquiry.

• others

"FluoroSurf FG-5090" is a coating agent that improves release properties by being applied to molds treated with fluororesin. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * It can also be applied to molds treated with fluororesin, and can be easily applied on the molding site using a brush or spray gun. * Just one application grants a non-stick property to the mold surface, demonstrating excellent release properties even for complex and precise shapes. * There is no transfer or accumulation of dirt on the mold or workpiece. * It is non-flammable and does not fall under organic solvent regulations, eliminating the need for explosion-proof facilities, quantity management, and environmental measurements as stipulated by fire safety and occupational safety laws. * If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The "Fluorosurf FG-3650 Series" conformal coating for electronic circuit boards is suitable for waterproofing and insulation protection of electronic components, leak prevention, and moisture-proof and waterproof coatings for mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety regulations. Additionally, PFOS, PFOA, and PFHxS are not used at all. 【Performance Features】 It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. - Compared to other resins, it has high moisture and waterproofing properties. → It offers four times the moisture resistance compared to urethane and acrylic moisture-proof coatings at the same film thickness! It demonstrates more than ten times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimal, making it ideal for lightweight mobile devices. - High resistance to acidic substances such as lithium battery electrolytes. → It can protect the circuit board during electrolyte leakage, preventing fire accidents. - It provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also exhibiting rust prevention effects. - It does not contain low molecular compounds like silicone, which can cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

• others

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 Series" exhibits protective functions such as moisture resistance, gasoline resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film coating! It is ideal for waterproofing and insulation protection of electronic components, as well as moisture-proof and waterproof coatings for mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational safety regulations, and contains no PFOS or PFOA. 【Performance Features】 ■ High moisture and water resistance → Compared to urethane and acrylic-based moisture-proof coatings of the same film thickness, it has 4 times the moisture resistance! It exhibits more than 10 times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile devices. ■ High resistance to acidic substances such as lithium battery electrolytes → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ It exhibits strong protective effects against acidic gases, saline solutions, and corrosive liquids, also providing rust prevention effects. ■ Since it does not contain low molecular compounds like silicone, it will not cause contact failure of electrical contacts after application. *If you would like a free sample, please contact us.

• others

The coating agent for substrates (conformal coating) "Fluorosurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under organic solvent regulations, making it free from the restrictions of fire laws and safety regulations. Furthermore, no PFAS regulated substances such as PFOS, PFOA, or PFHxS are used. 【Performance Features】 It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. - Compared to other resins, it has high moisture and waterproof properties. → It offers four times the moisture resistance compared to urethane or acrylic moisture-proof coatings at the same film thickness! It demonstrates more than ten times the moisture resistance compared to silicone-based coatings. The increase in weight due to the coating film is minimized, making it ideal for lightweight devices such as mobile equipment. - High resistance to acidic substances like lithium battery electrolytes. → It can protect the substrate in case of electrolyte leakage, preventing fire accidents. - It also provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, exhibiting rust prevention effects. - It does not contain unreacted low molecular compounds like silicone or UV-curable types, ensuring high reliability. It will not cause contact failure of electrical contacts after application.

• others

It can be easily applied with a transparent coating, providing long-lasting (over 1 year) dirt resistance to glass surfaces. ■ A durable dirt-repellent coating is needed without changing the appearance. ■ It is non-flammable and low-odor, making it safe to apply in stores. FluoroSurf FG-5084 is also used to prevent dirt on smartphone touch panels. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The "FloroSurf FG-3650 Series" electronic circuit board protective coating (conformal coating) has numerous achievements in waterproofing and insulation protection for automotive circuit boards and electronic components, as well as in moisture-proof and waterproof coatings for mounted circuit boards. 【Performance Features】 ■ Higher moisture and waterproof properties compared to other resins! → It offers four times the moisture-proof performance compared to urethane and acrylic-based moisture-proof coatings at the same film thickness! It exhibits more than ten times the moisture-proof performance compared to silicone-based coatings. This coating minimizes weight gain, making it ideal for lightweight devices such as mobile equipment. ■ Resistant to acidic substances such as the electrolyte of lithium batteries! → It can protect the circuit board in the event of electrolyte leakage, preventing fire accidents. ■ It provides strong protective effects against acidic gases, saline solutions, and corrosive liquids, also exhibiting rust prevention effects. ■ In reactive coatings (such as silicone and UV acrylic), unreacted components remain and can affect properties. This product does not retain unreacted components (low molecular compounds), ensuring stable electrical characteristics and preventing contact failure of electrical contacts after application. ■ A model with fluorescent dye for application confirmation is also available. *Please contact us if you would like a free sample.

• others

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for insulating protection and waterproofing of electronic components and mounted substrates, and is non-flammable and exempt from organic solvent regulations, making it free from fire safety and occupational safety regulations. Compared to urethane, acrylic, and silicone-based insulating coatings, it has 3 to 10 times better moisture resistance (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. 【Benefits in Manufacturing Environments】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire safety regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Exempt from organic solvent regulations under occupational safety law. → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment such as heating furnaces is required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating. *Please contact us if you would like a free sample.

• others

The protective coating agent for electronic substrates (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings of mounted substrates. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational health and safety law restrictions. Compared to urethane, acrylic, and silicone-based coatings, its moisture resistance is over 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency with a thin film. 【Benefits in the manufacturing environment】 ■ Safe to use as it is a non-flammable, low-odor liquid. → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire safety regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under occupational health and safety law. → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment like heating furnaces is required. ■ Low viscosity makes it easy to handle. The workplace remains clean. ■ Pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating. *If you would like a free sample, please contact us.

• others

The protective coating agent for electronic substrates, "FloroSurf FG-3650 Series," is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating (conformal coating) of mounted substrates. ▼ Excellent performance of FloroSurf FG-3650 Series High moisture and waterproof properties / Resistance to lithium battery electrolyte / Acid resistance and resistance to oxidizing gases High insulation resistance and low dielectric constant / Non-flammable and non-hazardous ~ We are offering free samples exclusively for corporations! ~ Please select "Request Sample" from the [Contact Button] below.

• others

Introducing the high-performance fluorine-based mold release agent "FloroSurf," which surpasses baked-on fluoropolymer processing and silicone release agents. When conventional release agents fail to release ⇒ We solve the problem with outstanding release performance. When you want to improve continuous release properties ⇒ Continuous release properties will be enhanced. "FloroSurf" features nano-level release components that bond tightly to the mold surface ⇒ It provides powerful release and lubricating properties to the mold surface. It demonstrates exceptional continuous release properties in the molding of precision complex shapes, highly adhesive resins, elastomers, and fragile thin materials. ~ We are offering free samples exclusively for corporate clients! ~ Please select "Request Sample" from the [Contact Button] below.

• others

"FloroSurf FG-5093" is a fluorine-based dry mold release agent. It does not contain silicone, preventing contamination of molded products and eliminating the need for cleaning. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work well. It boasts outstanding durability, with a proven track record of continuous release for thousands of shots, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold modification ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The protective coating agent for electronic circuit boards (conformal coating) "FloroSurf FG-3650 series" is suitable for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coatings on mounted circuit boards. It is non-flammable and does not fall under organic solvent regulations, making it free from fire safety and occupational health and safety law restrictions. Compared to urethane, acrylic, and silicone-based coatings, its moisture resistance is over 3 to 10 times greater (at the same film thickness)! It exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. 【Benefits in the manufacturing environment】 ■ It can be used safely as it is a non-flammable, low-odor liquid! → FloroSurf FG-3650 is safe due to its non-flammability and low toxicity. It is not subject to PRTR law or fire safety regulations. No explosion-proof equipment is required, and quantity management is unnecessary. ■ Not classified as an organic solvent under occupational health and safety law → Management items such as workplace environmental measurements and organic solvent health checks for workers are no longer necessary. ■ Cures at room temperature in 5-20 minutes after application! → No special equipment like heating furnaces is required. ■ It has low viscosity, making it easy to handle. The workplace remains clean. ■ The pot life is virtually permanent. Zero waste. ■ Repairs are possible after coating.

• others

The conformal coating agent FluoroSurf FG-3650 series has been designed and developed for waterproofing and insulation protection of electronic components, as well as for moisture-proof and waterproof coating of printed circuit boards. It prevents metal migration with a thin film and exhibits protective functions such as moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency. 【Reasons to Choose FG-3650】 ■ High migration prevention performance ■ Non-hazardous material under the Fire Service Act, so explosion-proof equipment and quantity management are not required ■ Not classified as an organic solvent (under the Industrial Safety and Health Act), making on-site management easy ■ Dries at room temperature in a short time, eliminating the need for drying equipment ■ Low odor *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The conformal coating agent, FluoroSurf FG-3650 series, is specially designed for waterproofing and insulation protection of electronic components, as well as for moisture and waterproofing of mounted circuit boards. It has four times the moisture resistance compared to urethane and acrylic-based coatings and exhibits protective functions such as insulation, moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. It can be applied using a dispenser or spray, and the application is completed in just 5-10 minutes with room temperature drying! It is non-flammable and not subject to fire safety laws, nor is it classified as an organic solvent under safety regulations, significantly reducing on-site management items and equipment costs. Fluorinated regulated substances (such as PFOS, PFOA, PFHxS) are not used. *Free samples are available for those who request them (limited to corporations). If you would like a free sample, please include "Sample Request" in your inquiry.

• others

Anti-stain coating refers to a treatment that protects products from dirt. Faucet fixtures can easily accumulate scale from water, making it difficult to remove. Even aesthetically pleasing faucets can be ruined by scale and fingerprint stains, which detracts from their design. However, by applying an anti-stain coating, dirt can be easily removed, reducing the hassle of daily maintenance. 【Reasons to Choose FluoroSurf FG-5093】 ■ Dirt can be easily removed thanks to the effects of fluorine ■ Durability of over one year ■ Transparent thin film has minimal impact on appearance ■ Easy to apply on-site and dries at room temperature ■ Non-flammable and low odor, making it safe during application ■ When the effectiveness diminishes, reapplication is simple for performance recovery Other examples are also available! *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The "FloroSurf FS-1610 Series" is a non-combustible solvent-based water and oil repellent treatment agent/oil barrier agent. It can be easily applied using a dispenser, and a strong oil-repellent film is formed through room temperature drying. The oil-resistant repellent film can block the diffusion of oil for an extended period. The film is a thin transparent layer, but a fluorescent dye model is also available for verification. 【Examples of Implementation】 - Prevention of lubricant leakage from HDD spindle motor rotating shafts - Prevention of lubricant diffusion from micro-motor fluid dynamic bearings - Prevention of solder flux wicking - Prevention of contamination of electrical contacts by silicone oil *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The following two types of products have a proven track record for preventing the seepage of lubricating oil from the rotation axis of clocks. The "Fluorosurf FS-1610 Series" is a non-flammable solvent-based water and oil repellent treatment agent/oil barrier agent. It dries quickly, allowing for a short drying process, and its high oil repellency blocks the seepage of lubricating oil. The "Fluorosurf FS-6130 Series" is a water and alcohol-dilutable treatment agent that forms a fluororesin film by diluting it 10-30 times and allowing it to dry at room temperature. It is an environmentally friendly oil repellent as part of VOC measures. Various film thicknesses can be accommodated depending on the application. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

Fluoropolymer FS-1600 series, which has ink (oil-based) resistance and a non-flammable type that maintains high liquid repellency without degradation over a long period. 【Purpose of Coating】 The inner surface of the container has been fluorinated to clearly indicate the remaining ink level in ink cartridges and oil-based pens. 【Challenges】 - Requires ink resistance (oil-based) and the ability to maintain liquid repellency over a long period. Other examples are also available! *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The FluoroSurf FS-2060 series is a water-repellent and oil-repellent treatment agent developed for fibers and leather. It has a proven track record as a concentrated waterproof spray. It is more affordable compared to non-flammable solvent types. This petroleum-based solvent type is suitable for water-repellent treatment of fibers and leather, as well as for water-repellent applications on wood and building materials. 【Features】 - High water-repellent and oil-repellent properties, achieving super water-repellent levels depending on the material - Flexible film that does not compromise the texture of fibers and leather - Minimal whitening - Usable on a variety of materials beyond fibers and leather, including wood, stone, and paper - Quick-drying, taking 5-10 minutes at room temperature *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

"FloroSurf FG-5093" is a mold release agent that dissolves a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in cases where conventional release agents fail to provide satisfactory results. It boasts exceptional durability, with a proven track record of continuous release over thousands of shots, and its performance can be restored by reapplying with a brush or spray. 【 Case Study in Thin CFRP Molding 】 1. Background Introduction In the thin molding of carbon fiber, such as separators for fuel cells, conventional release agents would cause cracking during demolding, resulting in only about one good product out of ten sheets, leading to the abandonment of mass production. 2. Implementation Results By using FloroSurf FG-5093, continuous molding of 1000 shots became possible, and mass production was confirmed. Additionally, there is no transfer to the molded product, eliminating the need for cleaning and significantly shortening the process. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

**[Issue]** - Currently, the yield rate is 0%. No good products can be obtained with conventional release agents. We want to achieve continuous molding for at least 1000 shots. **[Solution]** Using "Fluorosurf FG-5093" enables mass production of 1000 shots! Additionally, cleaning of the molded products is unnecessary, significantly improving process efficiency! Fluorosurf FG-5093, when applied to the mold, reduces the adhesion of the surface molding resin, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work. It boasts outstanding durability, with a proven track record of continuous release for thousands of shots, and its performance can be restored by reapplying with a brush or spray. *If you would like a free sample, please include "Sample Request" in your inquiry.*

• others

By simply applying FluoroSurf FG-5093 to the nozzle and die, a fluorine film that adheres to the coated area continuously exhibits slip properties, making it less likely for issues such as surface defects, melt fracture, and sharkskin to occur, allowing for prolonged continuous molding. Even when the effectiveness decreases, it can be easily restored by reapplying on-site. Additionally, it is non-flammable, ensuring safe use during application. *Free samples are currently available. If you would like one, please include "Sample Request" in your inquiry.

• others

The "Fluoro Surf NL Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It boasts outstanding durability, with a proven track record of continuous release over thousands of shots, and its performance can be restored by reapplying with a brush or spray. [Challenge] - We want to increase throughput. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

"FloroSurf FG-5093" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release for thousands of shots, and its performance can be restored by reapplying with a brush or spray. Additionally, since the release agent does not adhere to the workpiece, cleaning after molding is unnecessary. Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

Anti-fouling coating refers to a treatment that protects products from dirt. Cooking utensils and machinery accumulate various types of dirt over prolonged use. If this dirt is left unattended, it can hinder the original performance and, in the worst-case scenario, lead to product failure. However, by applying an anti-fouling coating, dirt removal becomes easier, thereby reducing the hassle of daily maintenance. 【Introduction Background】 ■ A durable anti-fouling coating that does not change the appearance is needed. ■ Scale (white stains) adheres to metal surfaces and becomes difficult to remove. ■ Fingerprints are prominent on stainless steel control panels and inner doors. ■ Improvement of light transmittance and fingerprint prevention for films used on displays. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

FloroSurf FS-702X can be added in small amounts to radical polymerization type hard coatings to impart anti-fouling properties and low refractive index. As a practical example, it is used in plastic-type touch panels and polarizers for liquid crystal displays. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

Anti-fouling coating refers to a treatment that protects products from dirt. Cooking utensils and machinery can accumulate various types of dirt over prolonged use. In elevators, fingerprints on the control panel and door areas can be a concern. If this dirt is left unattended, it not only looks unappealing but can also prevent the product from performing at its best, and in the worst case, it may lead to rust and other issues. By applying anti-fouling coatings like FluoroSurf FG-5093, dirt removal becomes easier, reducing the effort required for daily maintenance. 【Problems Solved by Anti-Fouling Coating】 ■ Difficult for fingerprints to adhere and easy to wipe off ■ Does not alter the texture of stainless steel Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

Anti-fouling coating refers to a treatment that protects products from dirt. Faucet fixtures can easily accumulate scale from the water, making it difficult to remove. Even aesthetically pleasing faucets can be ruined by scale and fingerprint stains, which detracts from their design. However, by applying an anti-fouling coating, dirt can be easily removed, reducing the hassle of daily maintenance. 【Reasons to Choose FluoroSurf FG-5093】 ■ Dirt can be easily removed thanks to the effects of fluorine ■ Transparent thin film has minimal impact on appearance ■ Easy to apply on-site and dries at room temperature ■ Durability of over one year ■ When the effect diminishes, reapplication is simple for performance recovery. Other examples are also available! *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

【Issue】 ■ Achieve dirt resistance without changing the appearance of materials with a transparent film! ■ Easy application on-site and air dries at room temperature ■ Durability of over one year The FluoroSurf FG-5000 series offers a durable dirt-resistant coating! A dirt-resistant coating is a treatment that protects products from dirt. Cooking utensils and furniture can accumulate various stains such as fingerprints and water spots over long-term use. However, by applying a dirt-resistant coating, it becomes easier to remove dirt, thus reducing the hassle of daily maintenance. Other examples are also available! *If you would like a free sample, please include "Sample Request" in your inquiry. (This is for wholesale only. We do not sell to individuals.)

• others

"FloroSurf FG-5093" is a metal dry lubrication coating agent made by dissolving a special lubricating fluororesin in a non-flammable fluorine-based solvent. When applied to a metal surface with a brush or spray, a dry lubrication film bonds to the surface with approximately 10 minutes of air drying at room temperature, forming a durable low-friction surface at the nanometer level. [Features] - The bonded lubrication film is durable. - It does not affect the material of drive belts. - Heat resistance up to 200°C. - Unlike lubricating oils, it does not contaminate the surroundings. - Reapplication can be done easily with just a top coat! Other examples are also available! *If you would like a free sample (limited to corporations), please include "Sample Request" in your inquiry.

• others

The "FluoroSurf FG-5093" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It boasts outstanding durability, with a proven track record of continuous release over thousands of shots, and its performance can be restored by reapplying with a brush or spray. 【Issues】 ■ It must be a PFOA-compliant product that can maintain the dispersibility of PTFE similar to C8 types over the long term. Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The "FloroSurf FS-702X Series" is a product that can impart functionalities such as anti-fouling, low refractive index, slip resistance, and water and oil repellency by adding a small amount to UV-curable acrylic hard coat agents. During drying, the fluorine component rises to the surface of the hard coat agent, exhibiting its functions, and an addition amount of about 1-3% is sufficient. It offers good cost performance. When exposed to UV light, it co-polymerizes with the components of the hard coat agent, enhancing wear resistance as well. [Introduction to Background] ■ We want to impart anti-fouling and anti-reflective functions to optical films. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

FluoroSurf FS-702X series is a fluorine-based additive for UV-curable hard coatings. When processing UV-curable hard coatings on optical films, simply adding a small amount of FluoroSurf FS-702X to the hard coating can impart functionalities such as anti-fouling (fingerprint reduction), low refractive index, and slip properties. After addition, the fluorine component rises to the surface of the hard coating and exhibits its functions, and during UV irradiation, it co-polymerizes with the components of the hard coating to become integrated. By integrating, this product's functionality possesses wear resistance. *If you would like a free sample, please include "Sample Request" in your inquiry.

• others

The fluorosurf FG-3650 series protective coating for electronic circuit boards is specially designed for waterproofing and insulation protection of electronic components, as well as moisture and waterproofing of mounted circuit boards. It has four times the moisture resistance compared to urethane and acrylic-based coatings, and it exhibits protective functions such as insulation, moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all in a thin film. It can be applied using a dispenser or spray, and the application is completed in 5-10 minutes with room temperature drying! It is non-flammable and not subject to fire safety laws, nor is it classified as an organic solvent under safety regulations, significantly reducing management items and equipment costs on-site. *Free samples are available for those who request them (limited to corporations). If you would like a free sample, please include "Sample Request" in your inquiry.

• others