光洋産業 List of Products and Services

KR-162PWL (With substrate: special non-woven fabric) KR-036PWL (With substrate: special non-woven fabric) KR-523PWL (With substrate: special non-woven fabric) KR-735PWL (With substrate: special non-woven fabric) KR-780PWL (With substrate: special non-woven fabric) KR-185NW (Without substrate)

• others

- It can now be used outdoors. - The electromagnetic wave shielding performance remains unchanged even when exposed to wind and rain. - It can be used for construction purposes as it is made of non-combustible materials. - Non-combustible, water-resistant, strong.

• Large tents and tent warehouses

The cause of the issues in the Wi-Fi environment may be the neighboring Wi-Fi signals entering through the window. By properly shielding unnecessary signals with window glass, you can comfortably improve the unstable wireless LAN indoors.

• others

This document explains "spatial design" for the stress-free operation of RFID (electronic tags). It covers issues such as misreading and interference, spatial design using electromagnetic shielding materials, and information about these materials. Koyo Industries will provide a consistent service from material development and shielding design proposals to delivery and subsequent maintenance. We encourage you to read it and make use of the information. 【Contents】 ■ Issues of misreading and interference ■ Spatial design using electromagnetic shielding materials ■ Introduction to electromagnetic shielding materials ■ Case studies in the apparel industry ■ Shielding spatial design for RFID system adoption in the convenience store industry ■ Purpose of the proposal and our strengths *For more details, please refer to the PDF document or feel free to contact us.

• RFID/IC tags

This document introduces examples of the use of "non-combustible SS aluminum sheets." It includes examples of interference prevention for electronic tag reading, construction photos, electromagnetic wave shielding for brainwave rooms, electromyography rooms, and hearing test rooms, as well as SS sheet construction examples and measures against radio wave interference in server rooms and VIP conference rooms. Additionally, it also introduces fire compartment wiring penetration treatment and moisture-proof airtight sheets for fire compartments. 【Contents (partial)】 ■ Examples: Interference prevention for electronic tag reading ■ Construction photos: Apparel, specialty stores ■ Electromagnetic wave shielding: Brainwave rooms, electromyography rooms, hearing test rooms ■ SS sheet construction examples: Brainwave rooms, electromyography rooms, hearing test rooms ■ Radio wave interference measures: Server rooms, VIP conference rooms *For more details, please refer to the PDF document or feel free to contact us.

• RFID/IC tags

● Before the measures were implemented, the electronic tags (RFID) on the apparel store side were being read by the reader on the back-end side, causing disruptions to operations. However, by spatially separating them with a non-combustible aluminum shield sheet partition (constructed on the back wall to prevent multipath interference, with ceiling installations in some cases depending on the environment), we reduced the impact of mutual interference and resolved the issue, and we are currently expanding renovations to all stores. ● By utilizing RFID and electronic shelf labels together, we can automate necessary parts and allocate limited personnel to areas where human involvement enhances corporate value and the significance of the store, achieving true labor reduction. Recently, due to the strain on radio waves leading to frequency shifts and reconfigurations, as well as an increase in RFID users and other wireless devices, cases of acquired radio interference and other issues have been observed. However, what is expected, considering the characteristics of RFID, is not just labor reduction. ● The non-combustible certified aluminum electromagnetic wave shielding sheet used has obtained F☆☆☆☆ certification and fireproof certification (non-combustible: NM-1776). Its high shielding performance and durability make it user-friendly, and since it can be relatively easily installed in general interior construction, it is expanding its range of applications in various uses where expertise was previously required.

• Special Construction Method

- It is a transparent and permeable electromagnetic wave absorber that can create peaks at specific frequencies due to its surface pattern. - In cases where multiple readers are used to read electronic tags, examples have been set up to prevent electromagnetic wave interference. By placing an absorber partition on the gate side during forklift operations with cardboard that has RFID electronic tags, interference waves from adjacent lanes can be absorbed and shielded, allowing for normal tag reading and improving errors caused by miscounts. - The partition can be moved as needed, enabling effective zoning of proximity areas, which allows for reduced work movement distances and labor savings. - Specifications for the transparent electromagnetic wave absorption panel for UHF-RFID in the 920 MHz band: Size: H2,000 x W1,000 x t5.0; Weight: 18.5 kg.

• others

Electromagnetic Wave Shielding Film *Wi-Fi Environment Improvement Measures *Wireless Radio Environment Improvement Measures ● By improving the radio wave environment in windows and indoors, it is possible to bring 5G traffic indoors without causing interference with Wi-Fi 6. Additionally, when applying for a local 5G license, interference adjustments between adjacent local 5G base stations and devices are required based on radio law-related examination standards. The only solution for the weakest point, which is window glass, is the electromagnetic wave shielding window film. ● It has a visible light transmittance of 70%, demonstrating high transparency while exhibiting excellent heat shielding properties. ● With a shielding effect of 25-30 dB, it provides high electromagnetic wave (electric field wave) shielding effectiveness while maintaining high transparency, helping to block harmful waves and reduce radio interference from Wi-Fi 6, 5G, local 5G, etc., thus aiding in countermeasures against speed reduction, delays, and leaks. ● It reflects over 90% of infrared rays (solar heat) contained in sunlight, cuts 99% of ultraviolet rays (UV), and has a unique high light selectivity (1.4 light efficiency for 73FG) with low reflection below that of glass, ensuring that the appearance is not compromised.

• Insulation work

- Measures against Wi-Fi radio waves and wireless radio wave measures are supported. - UHF band IC tags are being widely adopted, particularly in logistics applications, due to their convenience in reading a large number of IC tags over a wide area. However, because the communication distance is several meters long, it often ends up recognizing IC tags that should not be recognized. - To prevent misreads, there are methods to shield radio waves using shielded mesh or radio wave absorption panels. However, considering the flow of goods and people in logistics and production sites, the installation methods and locations for these solutions are limited, making it difficult to shield radio waves and implement UHF band IC tags in some cases. - The shielded roll curtain is a roll screen type that can be retracted and stored when not needed, allowing for accurate reading of IC tags without obstructing the flow of goods and people.

• others

【SS Sheet: Fireproof Material Certification Number (Non-combustible: NM-1776) F☆☆☆☆ Certification】 ● Reduction of radio wave interference in the 5G and WiFi6 era ● Aluminum sheet reinforced with glass cloth ● Both sides are aluminum, providing unprecedented strength, making it less likely to develop cracks from holes or bends during installation, and it excels in workability. In case of an emergency, the joints and holes can be reinforced with conductive aluminum tape of the same material, enhancing shielding performance. 【SS Tape】 ● Reinforcement of gaps between shielding materials, repair of holes, reinforcement of metal connections, and around openings (for shielding joints, shielding construction repairs, and joining metal to metal)

• board
• Heat shielding sheet
• Reinforcement and repair materials

● The aluminum tape reinforced with glass cloth uses a highly conductive metal foil as the adhesive surface, providing excellent flexibility, conductivity, and thermal conductivity. ● Since it uses a conductive adhesive, it can achieve conductivity in the vertical (thickness) direction just by sticking it on. Being in tape form, it can be wrapped around cables, devices, and irregular surfaces for use. ● By shielding the cables and connectors of electronic devices, it protects them from static electricity and electromagnetic interference, allowing for measures against electromagnetic and radio wave disturbances, as well as static electricity removal. ● When installing a freeze prevention device directly onto a resin pipe, aluminum tape treatment on the piping is necessary (wrap this product completely around the piping and ground the aluminum). 【Piping treated with aluminum tape can be installed using the same construction data as steel pipes】 ● It is used at joints and holes during shielding installation, and the reinforcement improves workability and enhances shielding performance. ● It can be used for through-cable treatment.

• others

Frequency-selective electromagnetic wave absorbing glass Frequency-selective electromagnetic wave absorbing panel (resin type) All custom-made Maximum size: 1,200mm × 2,400mm Manufacturable in both glass and resin types Can be used indoors and outdoors when manufactured in glass

• Window and shutter openings
• Special function opening
• others

All made to order Can be produced up to a maximum size of 1,200mm × 3,600mm Can be made from either glass or resin Usable for both interior and exterior applications High transparency High shielding properties

• Store display shelves
• Window and shutter openings
• Special function opening

We offer a one-stop solution for the development of electromagnetic wave shielding materials at our in-house research institute, manufacturing at our own factory, measuring materials and methods in our in-house research facility's "anechoic chamber," design, electromagnetic wave shielding construction, and electromagnetic wave measurement (handover).

• Special Construction Method
• Security Assessment
• Cart Gate

● The aluminum sheet, reinforced with glass cloth and double-sided aluminum foil, eliminates the need for copper mesh and copper foil, which are susceptible to corrosion. It exhibits unprecedented strength, making it less likely to develop holes during installation or cracks from bending, unlike conventional products. The joints and holes are reinforced with SS tape of the same material, enhancing workability and providing excellent shielding performance. ● The shielding performance is proven by numerous electromagnetic wave shielding construction achievements. ● As a durable and easy-to-install shielding material that replaces the difficult-to-handle copper foil in EEG, EMG, and hearing test rooms, the moisture-resistant aluminum sheet shield is easy to maintain, durable, requires no special skills, and is relatively easy to install in interior construction, making it ideal for new builds, renovations, and maintenance work.

• Interior construction
• Renovation and repair methods
• Special Construction Method

Electromagnetic wave shield doors for office use, stainless steel single-leaf doors, large steel sliding doors, and large electromagnetic wave anechoic chamber doors are electromagnetic wave shield doors tailored to needs and requests. Design can be customized according to frequency and required performance. Doors with shielded glass are also available.

• Entrance/Exterior Doors
• Wooden door
• Soundproofing/Shielding Unit

● This is a non-combustible material with a glass fiber core and aluminum foil attached to both sides. ● A tape of the same material (such as SS tape) is used at the seams to maintain adhesion. Heat insulation measures for buildings during the summer are key. ● In summer, roofs heat up due to solar electromagnetic waves, reaching temperatures of around 55°C to 70°C. By covering them with SS sheets, radiant heat is reflected, protecting the building from radiant heat that insulation materials cannot guard against, creating a comfortable space that is less affected by outside temperatures. ● By covering with this product, radiant heat is reflected, protecting the building from radiant heat that insulation materials cannot guard against, creating a comfortable space that is less affected by outside temperatures. ● The glass fiber reinforced core with aluminum sheets on both sides demonstrates durability, making it less prone to cracking from bending and improving workability on site. It also has waterproof performance and achieves moisture-proofing, heat insulation, and airtightness with a single layer of sheet even in fire compartments. ● According to alkali exposure tests conducted at our research institute, when applying this product directly to hardened concrete, no alkali corrosion is observed if primers, adhesives, etc., are used.

• Heat shielding sheet

1) "Wireless LAN Access Point Storage Box" - Controls the direction of radio wave emission to prevent interference and avoids interference caused by reflections from metal floor surfaces in ceilings, making it essential for ceiling-mounted access points. - Allows for easy adjustment and relocation of the AP position after installation. - Thickness can be adjusted according to the frequency band used, enabling optimal radio wave absorption. 2) "Heat-Reflective Transparent Electromagnetic Wave Shield Window Film" - Reflects over 90% of infrared rays (solar heat) contained in sunlight and cuts 99% of ultraviolet (UV) rays. - Offers a unique light efficiency of 1.4 with high light selectivity (for 73FG), demonstrating excellent heat-reflective properties while remaining transparent. It is a high-performance mirror type that can reflect infrared rays, with a visible light reflection rate of less than 10%, preserving appearance, and provides an electromagnetic wave (electric field wave) shielding effect of 25-30 dB. - When used in combination with the adjustment of the installation position of the "Wireless LAN Access Point Storage Box," high attenuation effects can be observed for exterior walls: metal curtain walls / structural floors: metal floors such as deck plates. 3) In cases where the exterior wall is RC (reinforced concrete) or ALC (autoclaved lightweight concrete), there is no shielding performance, so a composite measure involving the installation of non-combustible aluminum sheets will be implemented.

• Curtain Wall
• Heat shielding sheet
• Curtain wall construction

● It excels in electromagnetic wave shielding (reflection, absorption, blocking, and shielding), and since it is a conductive fabric, there is no generation of static electricity, allowing the entire fabric to be grounded. ● Weight reduction: Compared to shielding measures using metal, it is lightweight and has good handling properties. Ventilation holes: By using highly breathable conductive fabric, shielding in the hole areas is possible. ● The fabric is made of aramid fibers coated with copper and nickel plating, providing high conductivity, bend resistance, and flexibility. Additionally, aramid fibers are high-performance fibers that possess both heat resistance and flame retardancy, and are used in items such as firefighting suits. ● The three-layer structure of PET yarn plated with Ni (nickel) + Cu (copper) + Ni (nickel) exhibits excellent shielding properties.

• others

● This gasket uses conductive fibers and can be utilized in the contact areas of simple shielded fixtures. ● It is a gasket made from flexible, elastic, and highly conductive silver-coated fibers. ● The backside is equipped with conductive adhesive copper foil tape, serving as a shield gasket for contact areas between metals.

• Reinforcement and repair materials
• others

KOYO MS Sheet (Magnetic Shield) is a material particularly suitable for shielding low-frequency alternating magnetic fields. It has minimal degradation of magnetic shielding performance due to processing such as bending, punching, and cutting, making it easy to process into curved surfaces and various shapes. Furthermore, by combining it with other materials, it is possible to significantly enhance the properties of the MS sheet. It is lightweight (amorphous metal + front and back PET film) and has good workability (with minimal degradation of magnetic shielding performance due to processing such as bending, punching, and cutting, and easy processing into curved surfaces and various shapes). This is especially beneficial during equipment replacement and renovation, as it greatly reduces the risk of surrounding damage and adhesion accidents during the transportation of materials in high magnetic field environments, allowing for safe construction. 【Features of Magnetic Shielding Sheet】 ● No magnetic directionality ● Lightweight and easy to handle ● Large size available (900×1800) ● On-site processing possible (bendable) ● Punching processing possible

• Safety and consumables
• Interior construction
• Power distribution and control panels

- It is capable of wideband radio wave absorption from 300 MHz to 110 GHz and excels in radio wave absorption performance for oblique incidence. It is easy to cut and process, making installation at the site straightforward. - It is an electromagnetic wave control material and radio wave absorber effective for wireless technology, EMC, and noise countermeasures. - Made primarily from polyolefin resin and carbon, it can be manufactured in suitable thicknesses according to the applicable frequency. - Wireless LAN access points stored in the ceiling can cause interference due to reflected waves from the deck plate within the ceiling; the radio wave absorption box cuts off upward radio waves, enhances the directionality of downward waves, and absorbs excess radio waves. - Installing it on adjacent partition walls in the same floor tenant prevents radio wave interference and secures channels. - Near glass windows, it prevents radio wave leakage to the outside, and by using it in conjunction with shielding films and SS sheets on the floor, it reduces radio wave interference between floors and inside and outside. - The box for wireless LAN access points, when combined with SS sheets, prevents radio wave interference. - It is used as an electromagnetic wave control material for adjusting wireless LAN access point equipment during system installation (used to isolate and adjust several units at hand).

• partition
• others

It has excellent shielding performance and is suitable for repairing electromagnetic wave leakage for indoor use. It demonstrates superior adhesion to various materials such as metal, glass, and wood, reinforcing corners and overlaps of shielding sheets, joints of shielding doors, shielding glass, and caulking of mixed joints and sash frames.

• Entrance/Exterior Doors

In recent years, the number of electronic devices and radar emitters that emit high-frequency waves has increased, and correspondingly, EMC and EMS measures have become essential. The "high-frequency compatible electromagnetic wave absorption sheet" absorbs electromagnetic waves in the gigahertz range of 5 to 110 GHz. It can be customized in terms of materials, mixing ratios, and film thickness for the electromagnetic wave absorption layer and metal reflection layer to match the frequencies emitted by electronic devices. As the speed of CPUs and other components increases, the noise frequency range is shifting to high frequencies, making it difficult for traditional ferrites and filters to prevent interference with signal waveforms, complicating noise countermeasures. This product excels in radio wave absorption performance at oblique angles, is easy to process and install due to its thin sheet form, and has excellent durability. It is suitable for countermeasures against module TX-RX crosstalk (ETC at 5.8 GHz, X-band at 8-12 GHz, ship radar at 3 GHz and 9 GHz, proximity radar at 24 GHz, local 5G at 28 GHz, high-speed wireless LAN at 60 GHz, vehicle-to-vehicle radar at 76.5 GHz, and millimeter-wave noise countermeasures from 50 GHz to 110 GHz), ground plate crosstalk countermeasures, unwanted radiation noise absorption, communication facility sites, countermeasures against ETC misoperation due to reflection, and ghosting issues caused by nearby metal structures in radar applications.

• others

The pipe frame structure (which does not require screws or pipe joints by the driver) allows for easy assembly and disassembly, is lightweight, compact, portable, does not occupy installation space, and is space-saving for storage, making it a simple shield room that can be set up anywhere. The shielding layer (shield tent fabric) is double-layered, enabling high-performance shielding, and the floor is made of galvanized steel sheets, which can be replaced only in case of damage, without affecting the tent's shielding performance.

• others

- The adoption of "SUS double mesh" at the intake points for "light" and "air" has eliminated the need to install air conditioning and lighting fixtures indoors. - This is a prefabricated panel-type shield room that has a short on-site construction period and allows for easy relocation and modification. - By using SUS double mesh for the daylight windows and ceiling openings, we have eliminated the durability issues and clogging associated with previous mesh shield rooms, making lighting fixtures, ventilation equipment, and fire alarm systems unnecessary. - Unlike traditional sealed spaces, this design allows for visibility both inside and outside, creating a sense of openness. It is lightweight and easy to construct, and in office spaces within tenant buildings, there is no need for construction on the building side. Layout changes after installation can be easily managed without the need for dismantling, relocation, or reassembly, and there is no requirement for restoration to the original state upon departure. - The design is tailored to the intended use and specifications, and due to the panel system, construction and adjustments in dimensions can be easily carried out.

• Dismantling and moving
• Metalwork
• Interior construction

● The NFC/RFID system, which is a global standard, is being adopted in transportation-related contactless IC cards and electronic money, expanding convenience. ● From card form factors to system-compatible mobile phones and smart devices, small mobile electronic devices are equipped with reader/writer (R/W) functions, allowing for the active use of inexpensive NFC tags. ● As a result, everything and everywhere can connect to internet services, enabling white goods and healthcare devices without network connectivity to connect to the internet through smartphones and start collaborating with various cloud services. ● The biggest advantage is that the system can be built without imposing special burdens on stores or users. ● On the other hand, when incorporating into small mobile electronic devices, it is inevitably necessary to be close to metals such as printed circuit boards, so a method is employed that places magnetic shielding effects between the metal surface substrate and the tag antenna, as well as low-loss soft magnetic materials. ● This allows the incident magnetic flux to pass through the layer of high permeability materials and return from the end face, enabling communication even when an RF tag is attached to a metal surface.

• others

■Necessary for the construction of wireless and radio technology software and hardware ● Our own site is not available... ● There is a site, but no testing facilities... ● There are no engineers available to handle it... ● There is no time to conduct tests... ● You can use our facilities in a rich natural environment. ● If it is a transportable product, we will accept measurements at our site. ● Due to cost constraints, we have to reduce the number of measurements... ● We do not want to slow down the development speed... 　※ Please consult with us first. 【Overview】 'EMC 3m Method Anechoic Chamber' Measurement ● Compliant with the Japan Architectural Institute Environmental Standards (AIJES-E0003-2017) ● Measurement of interference wave electric field strength ● Measurement of conducted interference waves at power ports (noise terminal voltage measurement) / Measurement of conducted interference waves at communication ports ● Measurement of interference power 'EMC Shielding Performance Measurement' Measurement Targets ● Full-scale shielding performance measurement at large openings (doors, windows, etc.) ● Shielding performance measurement of various materials (up to 2400mm x 2400mm)

• Turntable

● To resolve the issues you inquired about, we offer on-site measurement and testing services for electromagnetic wave environments. ● From the pre-meeting of the planning stage, we provide a one-stop solution that includes on-site measurements, consulting based on the results, and subsequent electromagnetic wave countermeasures and shielding construction. ● We will also propose more cost-effective and efficient materials and construction methods.

• Coastal construction
• Other construction services
• Other measuring instruments

We measure the electromagnetic environment of buildings such as companies, factories, and hospitals, where there are concerns about equipment malfunction or health hazards to humans due to electromagnetic wave interference. We also offer measurements of the shielding effects at installation sites for MRI and CT machines, as well as surrounding electromagnetic environments. 1) Magnetic Field Measurement When it is necessary to know the magnetic field environment in advance, such as for the installation of devices that are sensitive to magnetic fields, please make use of our environmental measurement services. 2) Examples of On-Site Measurements - Installation sites for electron microscopes - Installation sites for semiconductor manufacturing equipment - Locations of hospital facilities and testing equipment - Near power transmission lines - Near transformers - In areas surrounding apartment buildings or residential construction sites, when there are nearby power lines or substation facilities 3) Classification of Environmental Magnetic Fields - Direct Current Magnetic Fields Magnetic fields leaking from permanent magnet applications (such as speakers), magnetic fields generated by direct current from lightning strikes or welding machines, or strong electromagnets (such as lifting magnets), as well as geomagnetic fields. - Alternating Current Magnetic Fields Magnetic fields from power transmission lines and distribution equipment at commercial frequencies. - Variable Magnetic Fields Transient magnetic field changes due to the passage of trains or vehicles, and disturbances in magnetic fields caused by the operation or shutdown of electrical equipment and devices.

• others

【Features of KR-G227 Inorganic Adhesive】 - It is a powder hardener-added inorganic liquid adhesive. - The liquid itself is odorless, and no volatile substances or harmful gases are generated during drying. - It cures through dehydration condensation reactions caused by the hardener and drying. - The adhesive itself is non-flammable, has high heat resistance, and does not degrade under ultraviolet light. - Viscosity can be adjusted by adding water.

• glue

★ The fire from the stove has spread to the vinyl curtains and disinfectant... A two-story wooden store has been completely burned down, with one person in critical condition and 11 others injured, both seriously and lightly. There has been an increase in fires at restaurants and homes compared to last year. Many people have likely installed non-flame-retardant vinyl sheets as an emergency measure, but from a disaster prevention perspective, there is a growing possibility of receiving warnings from the fire department in the future. Please make sure that the products you use have the "Flame Retardant Certification Label" and are flame-retardant processed products. ■ Antiviral processing, antibacterial processing, flame-retardant processing 【Antiviral Processing】 Organic synthetic type, blended PVC sheet/body (JP06125409X0007K) 【Antibacterial Processing】 Organic synthetic type, blended PVC sheet/body (JP0122409A0002V) ● Reduces specific viruses on the product. ● Antiviral processing is not intended for the treatment or prevention of diseases. ● Complies with SIAA safety standards.

• others

■The Necessity of Flame-Retardant Processed Sheets In the immediate emergency measures, many may have installed non-flame-retardant vinyl sheets, but depending on how they are installed, there is a risk of violating fire safety laws, and depending on the installation location, there is a significant possibility of being pointed out by the fire department. Please make sure that the product has a flame-retardant certification label. ■When spending a certain amount of time in a situation where sufficient distance cannot be maintained, installing vinyl sheets can serve as a shield, helping to prevent face-to-face droplets and providing a sense of security at the same time! These products are treated with flame-retardant processing, making them less likely to spread flames even if ignited, and they are less likely to become a source of fire. For this reason, they can be used safely in restaurants and smoking areas, and they are lightweight and safe even if they fall during a disaster, making them ideal for clinics, treatment centers, and public institution counters. Additionally, being completely transparent provides a sense of openness and allows expressions to be clearly conveyed, making them perfect for reception areas and cash registers in beauty salons and restaurants where interaction with customers occurs. The hanging curtain type, made of flame-retardant transparent vinyl, does not create a sense of pressure, blocks droplets in face-to-face interactions, and allows for safe communication while seeing the customer's face, making it ideal for reception areas and bedside in medical institutions.

• others

It is characterized by the ability to ventilate by creating a gap at the top. "Partitioning" and "opening" can be easily done, and by installing roll screens at entrances, hallways, halls, and living rooms in residences, care houses, nursing, and welfare facilities, it allows for ventilation of the upper and lower spaces when in use, and can be easily rolled up with one touch when passing through. The flame-retardant transparent vinyl does not create a sense of pressure, effectively blocking direct droplets and significantly reducing anxiety about infection, while allowing for face-to-face communication. Safety measures should also be taken alongside droplet prevention measures! To prevent fires, flame-retardant products are required according to fire safety standards. Many may have installed non-flame-retardant vinyl sheets as an immediate emergency measure, but from a disaster prevention perspective, there is a growing possibility of receiving warnings from the fire department in the future. Please ensure that the products have a flame-retardant certification label. With antiviral processing, antibacterial processing, and flame-retardant processing, they are durable for long-term use. In the event of damage or contamination, and post-COVID, a screen replacement system adopted by the Shinkansen can be applied, allowing for easy replacement of the screen fabric as an additional option. The bottom front curtain is made of soft vinyl, making it easy to cut for processing openings for handovers with scissors.

• others

● By simply attaching it to the vibration source, it suppresses noise and vibrations generated by the device, creating a comfortable space. ● Material selection can be tailored to the usage temperature environment and target frequency. ● We propose a new method of forming a vibration-damping layer through injection molding, replacing the traditional application of vibration-damping sheets and coatings. ● It can be processed using various methods such as adhesion of molded products, insert molding, and two-color molding. ● Noise and vibration control technologies can be classified into four categories: vibration damping, vibration isolation, sound absorption, and sound insulation, based on whether they reflect, insulate, or absorb the vibrational energy of vibrating substances (solids and air). ● Neofeed is a vibration-damping material that absorbs the vibrational energy of solids. ● It efficiently attenuates solid vibrations and also reduces air vibrations (noise) generated by solid vibrations. ● A lineup of highly effective vibration-damping materials using non-PVC resins. ● In addition to standard sheet types with thicknesses of 1mm and 2mm, there are also thermoforming grade pellet types and 125μm film types available. ● We also accept various processing requests, such as punching sheets and laminating with other materials like sound-absorbing foam.

• Washing machine and dryer

● Perfect for those who want to conduct microbial testing quickly! Microbial tests, which previously took at least 24 hours, can now provide results in about 10 minutes. ● The ability to conduct rapid microbial testing allows for constant monitoring of bacterial counts, leading to "reduction of inventory until shipment" and "enhancement of risk management." We are conducting demonstrations at our company. ● Additionally, we are also evaluating samples at our research facility, so please feel free to contact us. 【KB-VKH01】 □ Measurement time: approximately 10 minutes. □ Detection using a 0.4μ dedicated membrane filter and nucleic acid staining reagent. □ Can be used for management of live bacteria, dead bacteria, and total bacteria. 【KB-VKH02】 □ Live bacteria measurement type. □ Measurement time: approximately 6 minutes. □ Detection using a 0.4μ dedicated membrane filter and viability staining reagent. □ End model.

• Welfare and medical equipment
• others

●This is one of the consumables required when using the rapid microbial testing device BioProler. ●You can select the appropriate filtration chip according to the type and amount of the sample. ●If the sample contains a large number of components or substances other than bacteria, using the appropriate filtration chip will allow for the measurement of samples that would otherwise be difficult to measure.

• others

This is a reagent used for measurements with the microbial rapid testing device Bioprolar. In addition to bacteria, staining reagents and methods for yeasts and other organisms are currently under development. For more details, please feel free to contact us.

• others