Fuji Steel Industry CO.,LTD List of Products and Services

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from the increasing trends of typhoons and sudden heavy rains in recent years. By installing sponge and water stop rubber, it significantly reduces leakage. For curved sections, FN (inner curved board) and FW (outer curved board) are used, while for straight gaps, FJ/FJL (gap boards) are utilized, ensuring effective leakage prevention even in complex site shapes, contributing to flood control measures. *For more details, please download the PDF or feel free to contact us.*

• Water stop

In recent years, flooding damage due to guerrilla rainstorms and typhoons has been increasing nationwide. In particular, flooding under floors accounts for about 60% of flood damage cases. Traditional sandbags take time to prepare, and it is difficult for women and the elderly to prepare, transport, and install them. On the other hand, 'Flood Guard F' is extremely lightweight and easy to transport and install. Made of ABS resin, it has strong durability, can be resized according to the location of use, can be compactly stored when not in use, and is compatible with the 3R principles. 【Performance Comparison (Partial)】 <Speed> ■Flood Guard F: Can demonstrate its capability just by placing it, excellent for initial response ■Typical sandbags: Require the labor of filling with soil ■Water-absorbing sandbags: Require the task of soaking up water *For more details, please refer to the PDF materials or feel free to contact us.

• Water stop

The Flood Guard F80 is a type of simple water barrier that can be connected and installed according to the location. The F80 is self-supporting and does not require installation rail construction, making it very economical. The main product, the FZ80, is made of ABS resin and weighs about 8 kg, which is approximately 60% lighter than a bag of sand, allowing installation by women and the elderly. It has a maximum water stop height of 81 cm, making it suitable for floor flooding. The basic structure shares features with the F50 and offers water stop capabilities and durability that far exceed that of sandbags.

• Water stop

"Flood Guard F" is a simple type of water stop board that has been certified after passing the evaluation of disaster prevention necessity, safety, and functionality at the 23rd Disaster Prevention Product Recommendation Review Meeting held by the General Incorporated Association for Disaster Prevention and Safety. We conducted a leakage test using this product and the "Flood Guard Asia Specification." We filled fresh water to a height of 51 cm, adjusted it to maintain that level, and confirmed the stability of the water level visually for more than one minute. After that, we collected the leakage from the collection point for one minute after the leakage amount stabilized, performing this collection three times. We calculated the average leakage amount from the mass of the collected leakage and converted it to an hourly rate, which was recorded as the leakage amount. Our company is committed to daily research and development to provide better products. [Test Subjects] ■ Flood Guard F: 2 units of FZ50, 1 unit of FT50, 1 unit of FG50, 1 unit of FGL50 ■ Flood Guard Asia Specification: 3 units of DZ50, 2 units of SG50 ■ Sandbags: 26 units *For more details, please refer to the PDF document or feel free to contact us.

• Water stop

We would like to introduce our "Fitting Bar" that we handle. The water stop board uses the walls at both ends to prevent water intrusion. However, the ground and walls are often not at right angles, which can create gaps between the water stop board and the walls. Additionally, the water pressure on the wall side of the water stop board is lower compared to the bottom, which can lead to inefficient compression of the water stop rubber and water stop packing, resulting in leaks. Therefore, the Flood Guard F uses the "Fitting Bar." Compared to conventional products, the water stop capability has been significantly improved. 【Features】 ■ When using FG that utilizes the side walls for water stopping, there are no gaps. ■ When using FS that utilizes the back wall for water stopping, there are no gaps, enhancing the water stop effect. ■ By aligning FG, it is also possible to accommodate "steps." ■ The water stop capability has been significantly improved compared to conventional products. *For more details, please refer to the PDF materials or feel free to contact us.

• Water stop

"Flood Guard F" is a simple water barrier designed to prevent flooding caused by typhoons and sudden heavy rain. Made of lightweight, high-strength ABS, it can be set up quickly and is effective in emergencies. When not in use, it can be stacked for space-saving storage. 【Features】 ■ Two types: Maximum water stop height of 50cm for the "F50 series" and 80cm for the "F80 series" ■ Curved types "FN50/80・FW50/80" can be installed on curves ■ "FT50/80" can be adjusted to the best size from end to end of the installation area ■ "Double water stop" prevents leaks from the early stages of flooding ■ "Fitting bar" fills the gap between the wall and the water barrier ■ "Catch clip" reduces leaks and makes it easy to connect multiple units *For more details, please download the PDF or feel free to contact us. *Recruitment for agents has ended.

• Water stop

Are you prepared for potential water disasters? It is difficult to predict where water damage, such as river flooding or heavy rain, will occur. Our new type of simple water stop board, "Flood Guard F," is easy to carry, resistant to being swept away by strong currents, and durable enough to withstand impacts from debris. Additionally, it is an environmentally friendly material recycling product (3R product) that emphasizes Reduce (high durability), Reuse (reusability), and Recycle (recycling). *For more details, please download the PDF or feel free to contact us.

• Disaster prevention supplies

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from recent trends such as typhoons and sudden heavy rains. By installing sponge and water stop rubber, it significantly reduces water leakage. ■FZ50 Weight (kg): 4.4 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Water stop

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from the increasing trends of typhoons and sudden heavy rains in recent years. By installing sponge and water stop rubber, it significantly reduces water leakage. ■FN50 Weight (kg): 3.7 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Water stop

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from recent trends of typhoons and sudden heavy rains. By installing sponge and water stop rubber, it significantly reduces water leakage. ■FW50 Weight (kg): 3.1 Maximum waterproof height (cm): 51 Maximum durability water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Water stop

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from the increasing trends of typhoons and sudden heavy rains in recent years. By installing sponge and water stop rubber, it significantly reduces leakage. For curved sections, FN (inner curved board) and FW (outer curved board) are used, while for straight gaps, FJ/FJL (gap boards) are utilized, ensuring effective leakage prevention even in complex site shapes, contributing to flood control measures. *For more details, please download the PDF or feel free to contact us.

• Water stop

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from typhoons and sudden heavy rains, which have been on the rise in recent years. By installing a sponge and water stop rubber, it significantly reduces leakage. Thanks to its slide structure, the external width can be adjusted within the range of 560 to 705 mm. ■FT50 Weight (kg): 6.6 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Water stop

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from the increasing trends of typhoons and sudden heavy rains in recent years. By installing sponge and water stop rubber, it significantly reduces leakage. ■FG50 R/L Weight (kg): 4.1 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 ■FGL50 R/L Weight (kg): 4.5 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Water stop

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from the increasing trends of typhoons and sudden heavy rains in recent years. By installing sponge and water stop rubber, it significantly reduces leakage. The side seal is a product used in combination with "Flood Guard F" to further reduce leakage. ■ FS50 Side Seal Weight (kg): 1.5 Maximum waterproof height (cm): 51 Maximum durability water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Water stop