ペリー・ジャパン List of Products and Services

"PERI UP/Rosette" is an easy-lock (wedge-type) support system. Assembly is simple and safe, and it also improves work efficiency on site. The main components are made up of modules, demonstrating high adaptability. The posts and horizontal members can be easily and quickly connected using a one-touch automatic locking device (Gravity Lock: patented technology in Germany!). Once the wedge is inserted into the joint, it can be securely locked with a hammer, ensuring it won't come loose. [You can view a reference video about Gravity Lock.] Applications include work stages, table forms, stair towers, and various other uses. [Features] - Easy and safe assembly - Improved work efficiency on site - High adaptability *For more details, please refer to the PDF document or feel free to contact us.

"Push Pull Prop" is a support material for adjusting the alignment of formwork and precast formwork. Reflecting customer feedback, it has been improved to allow for easier length adjustments compared to conventional products. Additionally, it has been designed for easy installation onto precast elements using dedicated components. The handle has been made easier to grip compared to previous models, and the finish has been changed from paint to plating, allowing for longer use as a rental item. 【Features】 ■ Quick length adjustments using a slide pipe function (supports formwork heights up to 14m) ■ Safe and speedy installation on precast columns and walls *For more details, please refer to the PDF document or feel free to contact us.

The "PERI Multi Prop" is a lightweight aluminum support material. It can be used in combination with frames as a table system or shoring tower. 【Achieve cost reduction and safety simultaneously!】 - Simple structure - Length adjustment possible before assembly with built-in measuring tape - Increased work efficiency 【Faster assembly with frame combination!】 - Towers can be pre-assembled on the ground surface - Can be fixed simply by driving wedges into the frame's coupling - Can be assembled using only a hammer Compared to traditional pin-supported props, the Multi Prop poses less danger during work, allowing for continuous adjustments even when partial loads are applied, without the need for inserting pins. By reducing the number of supports used with the "PERI Multi Prop," labor costs for slab formwork can be minimized. Additionally, ease of handling and management reduces waste in operations, leading to overall cost reduction. For more details, please download the catalog and check it. Feel free to contact us.

The "PERI Multi Prop" is a lightweight aluminum support material that can be used as a table or shoring tower when combined with a frame. It utilizes the "MPB Aluminum Beam" for the main beam and the "PERI Truss Beam GT24" for the cross beam, with examples of use including multi prop towers. We offer lengths ranging from 62.5 cm to 2.96 m to meet the demands of various construction sites, and the continuous thread along the entire length of the inner tube allows for easy adjustments, making it suitable for a wide range of heights. 【Other examples of use】 ■ Multi prop shoring at a height of 14 m (area: 3500 m2) ■ Multi prop tower supporting a cantilever slab at a height of 20 m ■ Multi prop "MP350" supporting column formwork, etc. For more details, please refer to the catalog or feel free to contact us.

The "PERI Multi Prop" is a lightweight aluminum support that can be used as a table or support tower when combined with a frame. By using it in conjunction with a frame, it can be assembled more quickly, and the frame can be attached to outer or inner tubes without changing the support spacing. It can be secured simply by driving a wedge into the frame's coupling with a single hammer, and no other tools are particularly required. 【Features】 ■ Simple structure ■ Faster assembly possible when used with a frame ■ Towers can be pre-assembled on the ground surface ■ Can be secured by just driving a wedge into the frame's coupling ■ Assembly possible with just a hammer For more details, please refer to the catalog or feel free to contact us.

The "PERI Multi Prop" is a lightweight aluminum support material that can be used as a standalone support or as a table or shoring tower. The "Multi Prop MP350," which can be adjusted between 1.95 to 3.5 meters, weighs only 19.7 kilograms, making it lightweight. Since the spacing between the inner and outer tubes is the same, frames can be easily attached. The cross-section is made of high-strength aluminum alloy, making it resistant to impact, and it is characterized by its durability, as it is less likely to break even if it falls over on a steel pipe when fully extended. 【Product Lineup】 ■ MP625 4.30–6.25m ■ MP480 2.60–4.80m ■ MP350 1.95–3.50m ■ MP250 1.45–2.50m For more details, please refer to the catalog or feel free to contact us.

The "Multi Prop" is a lightweight aluminum support material that can be used for various purposes, such as standalone support or as a table or shoring tower, and it plays a significant role in labor-saving construction methods. The self-propelled screw thread allows for adjustments of 36mm with a single rotation, making it very easy to adjust. The inner tube can also be easily extended manually. Being lightweight, it enables a single worker to perform tasks easily and safely. Its ease of handling and management eliminates waste in operations and contributes to cost reduction. 【Features】 - Compared to conventional pin-type supports, work speed is increased by approximately 25%. - The ECC powder coating prevents concrete adhesion. - The self-cleaning screw thread operates smoothly even in cases of severe dirt. - The built-in measuring tape significantly reduces the time required for final level adjustments. - The anti-rotation handle allows for safe transportation. For more details, please refer to the catalog or feel free to contact us.

The "PERI ACS Automatic Climbing System" is an integrated climbing system that serves as a self-climbing working scaffold and a large formwork panel system. 【Product Features】 ■ It is possible to climb with an integrated system of working scaffold and large formwork. ■ It uses hydraulic cylinders (rising 4 to 6 meters in about 20 minutes per batch). ■ Climbing is possible on both the outer side and the hollow of bridge piers. ■ Formwork can be safely and easily constructed and stripped on the main stage. ■ By placing the formwork on a carriage that can move back and forth on the stage, construction and stripping work for each concrete pouring batch can be performed safely and efficiently. *For more details, please refer to the PDF document or feel free to contact us.

The "CB Climbing Bracket System" is a climbing system that integrates a working scaffold with the large wall formwork system VARIO. 【Product Features】 ■ It integrates the working scaffold and large wall formwork, allowing for climbing with a crane. ■ It is ideal for construction of high continuous sections, such as LNG storage tanks. ■ It reduces the labor of assembling and dismantling scaffolding, leading to labor savings and shortened construction periods. ■ By placing the formwork on a carriage that can move back and forth on the stage, it enables safe and efficient construction and stripping operations for each concrete pouring batch. *For more details, please refer to the PDF document or feel free to contact us.

At Perry Japan, we have a stockyard and product exhibition area. Ibaraki Stockyard 〒311-3155 Ibaraki Prefecture, Higashi Ibaraki District, Ibaraki Town, Shimohashi 2000-12 TEL: 029-219-0800 FAX: 029-219-0801 At Perry Japan, we conduct tours of the system formwork product exhibition hall, study sessions on system formwork, assembly experiences, and product seminars at the Ibaraki Stockyard, based on the concept of "Listen, See, Touch/Ride, Assemble" to meet our customers' needs. * What kind of company is Perry? * What is system formwork? * How is system formwork used? * I know about system formwork, but I've never used it. * I want to see the actual product before purchasing or renting! * And more. Please come and see our products at the Ibaraki Stockyard. For inquiries about tours, study sessions, or product seminars, feel free to contact us.

The "Quick Lowering Adapter UJA" is an accessory that can be easily attached under the head spindle. After removing the safety fixture (locking plate) of the Quick Lowering Adapter, striking the designated area (step wedge) with a hammer will cause the top plate to drop, quickly releasing the load on the head spindle. 【Product Information】 ■ Applicable height: Rising: 66 mm, Descending: 56 mm ■ Descending distance: 10 mm ■ Allowable load capacity: 50 kN ■ Minimum spindle insertion depth: 150 mm *Please use a spindle specifically for PERI UP and ST100 (Ø 38 mm). *For more details, please feel free to contact us.