今井美装店 List of Products and Services

The "IMI Specification Coating Softener" is a technology for peeling and removing existing coatings on steel structures and concrete structures equivalent to two types of substrate preparation. By applying the undiluted solution directly to the existing coating and leaving it for 1 to 24 hours, the binding strength of the particles and the resin that connects them in the existing coating is weakened, making the peeling process easier by also reducing the adhesive strength. Additionally, since the dripping rate after application is low, there is less loss of the peeling agent. 【Features】 ○ A method that uses organic solvents to soften, peel, and remove coatings ○ No dust generation ○ Biodegradable For more details, please contact us or download the catalog.

The environment-adaptive coating film swelling and softening stripping agent "Coating Film Stripping and Cleaning Method (IMI Method)" is compatible with oil-based phthalic acid, chlorinated rubber, epoxy, polyurethane, and fluorine-based coatings. However, it may not be sufficiently effective on inorganic zinc-rich primers, inorganic zinc-rich paints, and shop primers. 【Features】 - Does not use methylene chloride, significantly reducing the environmental burden - Requires less usage compared to conventional products, making it efficient - The softening effect on the coating film lasts, making stripping work easier - Low odor and extremely low skin irritation, improving the working environment - Can be used for spray painting For more details, please contact us or download the catalog.

The IMI method is a technique that involves applying a safe biodegradable paint softener to deteriorated existing paint surfaces to soften the paint, followed by the injection of high-pressure hot water for removal. This method minimizes damage to the substrate, offers high efficiency, does not lead to environmental destruction or pollution, is gentle on flora and fauna, and allows for safe and hygienic removal work without compromising safety or sanitation. It is the definitive method for removing existing paint from architectural structures without excessively damaging the substrate and reducing costs in subsequent processes. 【Features】 - Minimizes damage to the substrate while removing existing paint. - Fast removal speed due to the use of hot water, leading to shortened construction periods and reduced costs. - Completely free of chemicals that impose environmental burdens, making it eco-friendly. - Low noise and low vibration, preventing dust pollution. - Particularly effective on elastic and acrylic paint films. For more details, please contact us.

By combining a softening agent with high-pressure hot water cleaning, we solve the issues associated with traditional exterior wall renovation work.

The coating removal method "IMI Method" is the most advanced system that solves the problems of conventional methods by combining a softener with high-pressure hot water washing. It removes existing coatings on steel structures and concrete structures equivalent to two types of substrate preparation. By applying the undiluted solution directly to the existing coating and leaving it for 1 to 24 hours, the bonding strength of the particles and the resin that connects them is weakened, making the removal process easier by also reducing adhesion strength. *Registered with NETIS! The following conventional issues are resolved with the IMI Method. 【Conventional Issues】 ■ Long construction periods, causing unnecessary damage to the substrate. ■ Concerns about large amounts of dust generation and negative impacts on the surrounding environment due to waste liquid. ■ High material costs. ■ Difficulty in recovering sand. *For more details, please contact us or download and view the catalog.

This paint stripping method is environmentally friendly as it does not use methylene chloride, which has a significant burden on the environment. It has a low odor and extremely low skin irritation, making it gentle for workers. The stripping process and post-treatment are also easy. 【Features】 - Significantly reduces environmental burden by not using methylene chloride, which is harmful to the environment. - Low odor and extremely low skin irritation improve the working environment. - Requires less usage compared to conventional products, making it efficient. - Can be applied by spray painting. Additionally, the softening effect of the coating lasts, making the stripping process easy. - Only softens the coating, so it does not become sticky, and post-treatment is easy. *For more details, please contact us or download the catalog.

The environment-adaptive coating film swelling softening stripping agent "Coating Film Stripping and Cleaning Method (IMI Method)" is compatible with oil-based phthalic acid, chlorinated rubber, epoxy, polyurethane, and fluorine-based coatings. However, it may not be sufficiently effective on inorganic zinc-rich primers, inorganic zinc-rich paints, and shop primers. 【Construction Procedure】 1. Spray 250g/m² of Nippon Paint Eco (for bridges) evenly. 2. Apply toilet paper over the Nippon Paint Eco (for bridges). 3. Leave it for 1 to 2 hours immediately after application, check the swelling state of the coating film, and then reapply 250g/m² evenly. 4. Ensure adequate ventilation and leave it for 6 hours, 24 hours (the next day), 30 hours, and 48 hours after application until the coating film becomes removable. Be aware of the time required for the coating film to soften in preparation for this work. 5. Remove the coating film with a scraper or similar tool. 6. Wipe the steel surface from which the coating film has been removed with water (using a damp cloth, etc.). 7. Confirm the drying of the steel and proceed with the painting work. *For more details, please contact us or download the catalog.

The environment-adaptive coating film swelling softening stripping agent "Coating Film Stripping and Cleaning Method (IMI Method)" is compatible with oil-based phthalic acid, chlorinated rubber, epoxy, polyurethane, and fluorine-based coatings. However, it may not be sufficiently effective on inorganic zinc-rich primers, inorganic zinc-rich paints, and shop primers. 【Construction Method】 1. Spray 250g/m² of IMI specification coating film softening agent evenly (first application). 2. Apply paper* over the IMI specification coating film softening agent. * Any general commercial product (such as toilet paper or water-soluble tissue paper) is acceptable. 3. Leave it for 1 to 2 hours immediately after application, check the swelling state of the coating film, and then reapply 250g/m² evenly (second application). 4. Ensure adequate ventilation and leave it for 6 hours, 24 hours (the next day), 30 hours, and 48 hours until the coating film is in a state that can be stripped. Be aware of the time it takes for the coating film to soften in preparation for this work. 5. Remove with a scraper or similar tool. 6. If a thick film remains, repeat steps 1, 2, 3, 4, and 5. 7. Wipe the steel surface from which the coating film has been removed with water (using a damp cloth, etc.). 8. Confirm the drying of the steel and proceed with the painting work.

The environment-adaptive coating film swelling and softening stripping agent "Coating Film Stripping and Cleaning Method (IMI Method)" is suitable for oil-based phthalic acid, chlorinated rubber, epoxy, polyurethane, and fluorine-based coatings. However, it may not be sufficiently effective on inorganic zinc-rich primers, inorganic zinc-rich paints, and shop primers. 【Features】 ○ Significantly reduces environmental burden by not using methylene chloride ○ More efficient with a smaller amount used compared to conventional products ○ Softening effect on the coating film lasts, making stripping work easier ○ Low odor and extremely low skin irritation, improving the working environment ○ Spray painting is possible For more details, please contact us or download the catalog.

The IMI specification paint film softener is designed to have extremely low dripping during application, making it environmentally friendly. It achieves the same effect with approximately 60% of the amount compared to conventional products. The duration of the softening effect is long, and the number of applications and scraping required is less than with conventional products. It is compatible with various organic coatings, including EP, resin-based plaster, stucco, various multi-layer finishing paints, elastic coatings, and solvent-based paints. 【Features】 - Low odor and extremely low skin irritation, improving the working environment. - Does not dissolve the paint film, making recovery of the film easy. - Does not damage wood, metal, or cement-based inorganic substrates. - As a wet method, it does not produce dust like sanders. - Noise levels are also kept low. *For more details, please contact us or download the catalog.

The coating removal method "IMI Method" is the most advanced system method that solves the problems of conventional methods by combining a softening agent and high-pressure hot water washing. It removes existing coatings on steel structures and concrete structures equivalent to two types of substrate preparation. By applying the undiluted solution directly to the existing coating and leaving it for 1 to 24 hours, the binding strength of the particles and the resin that connects them in the existing coating is weakened, making the removal process easier by also reducing the adhesive strength. *Registered with NETIS! The following conventional issues are resolved with the IMI Method. 【Features】 ○ A method that uses organic solvents to soften and remove coatings ○ No dust generation ○ Biodegradable, with no harmful substances remaining on the removal surface ★ This method was used for the roof of the "Yoyogi National Gymnasium." *For more details, please contact us or download the catalog to view.