今井美装店 List of Products and Services

The "IMI Specification Coating Softener" is a technology for peeling and removing existing coatings on steel structures and concrete structures equivalent to two types of substrate preparation. By applying the undiluted solution directly to the existing coating and leaving it for 1 to 24 hours, the binding strength of the particles and the resin that connects them in the existing coating is weakened, making the peeling process easier by also reducing the adhesive strength. Additionally, since the dripping rate after application is low, there is less loss of the peeling agent. 【Features】 ○ A method that uses organic solvents to soften, peel, and remove coatings ○ No dust generation ○ Biodegradable For more details, please contact us or download the catalog.

The environment-adaptive coating film swelling and softening stripping agent "Coating Film Stripping and Cleaning Method (IMI Method)" is compatible with oil-based phthalic acid, chlorinated rubber, epoxy, polyurethane, and fluorine-based coatings. However, it may not be sufficiently effective on inorganic zinc-rich primers, inorganic zinc-rich paints, and shop primers. 【Features】 - Does not use methylene chloride, significantly reducing the environmental burden - Requires less usage compared to conventional products, making it efficient - The softening effect on the coating film lasts, making stripping work easier - Low odor and extremely low skin irritation, improving the working environment - Can be used for spray painting For more details, please contact us or download the catalog.

"Concrete surface roughening" refers to a treatment method for concrete surfaces using high-pressure water washing, aimed at removing contaminants and weak layers from the substrate concrete of ceramic tiles or mortar coatings, and creating effective roughness for adhesion. The high-pressure water washing roughening method is performed before applying mortar or tiles (in the case of direct bonding) to enhance the adhesion reliability between concrete and mortar by creating effective roughness for adhesion and removing dirt and weak layers. [Features] - Supervised by the Ministry of Land, Infrastructure, Transport and Tourism, Bureau of Construction [FY 2001 version of Common Specifications for Construction Work] Corresponds to Tile Work 11.3.3 (a) (ii) and 15.2.4 (c) - Adopted in the "10-Year Defect Warranty System for Tile Exterior Wall Construction" for "Substrate Treatment" For more details, please contact us.

Regarding substrate preparation, the level of substrate adjustment is set to RA according to "Renovation Common Work," and the surface preparation is classified as cleanliness level 2 (Type 2 Keren). However, in "Renovation Common Work," cleanliness level 2 (Type 2 Keren) states that "rust and paint film remain in recessed and narrow areas" for surface preparation, whereas the IMI method is characterized by the removal of rust and paint film from those areas. Complete stripping is made possible by combining high-pressure hot water washing with paint film softening stripping agents. For areas where a high-pressure hot water washer cannot be used (such as narrow spaces), surface preparation is maintained by using a combination of paint film softening stripping agents with power tools and hand tools. [Features] ○ Surface preparation of iron parts using the IMI method allows for a 10-year warranty on the paint film. For more details, please contact us.

"Tile, stone, and other chemical cleaning" refers to the existing coating stripping work on architectural structures using the coating stripping cleaning method (IMI method) and special cleaning work for exterior walls. A safe biodegradable coating softener is applied to the deteriorated existing coating surface to soften the coating, and stripping is performed by spraying high-pressure hot water. 【Working Conditions】 ○ Pressure: Around 30 MPa ○ Water flow: Around 30 liters/min ○ Temperature: Around 70°C ○ Distance: The cleaning gun is used approximately 20 cm from the wall surface ○ Cleaning nozzle: 30-degree fan shape For more details, please contact us.

The repainting of exterior walls of buildings, if done frequently, inevitably leads to the deterioration of the old finishing material's paint film. Eventually, we must consider completely stripping and removing the old paint film and refreshing the building with new exterior finishing materials to bring it back to life. The IMI method is an excellent technique for treating these substrate surfaces and is publicly recognized as a substrate treatment technology displayed in the Ministry of Land, Infrastructure, Transport and Tourism's renovation specification guidelines. 【Features】 - It is displayed in the Ministry of Land, Infrastructure, Transport and Tourism's renovation specification guidelines and is publicly recognized. - There is no damage observed on the substrate surface after the peeling of the deteriorated existing paint film. For more details, please contact us.

The traditional methods for removing paint films involve techniques such as scraping, sanding, and using stripping agents. However, these methods have issues such as long construction periods and high costs. Furthermore, the process of stripping existing paint films and removing rust can be considered a troublesome task due to problems like noise and dust pollution from the removal equipment. To address these issues, Imai Biso Co., Ltd. has been working on the development of a wall paint film renovation method (IMI method). **Features of the IMI Method:** - Minimally damages the substrate while stripping existing paint films. - Uses hot water, resulting in a fast stripping speed, which shortens the construction period and reduces costs. - Does not add any chemicals that impose an environmental burden, making it eco-friendly. - Operates with low noise and low vibration, preventing dust pollution. - Particularly effective against elastic and acrylic paint films. For more details, please contact us.

The conventional paint film peeling situation resulted in harmful substances (lead-based, asbestos-based) contained in the old paint film being dispersed due to the powdery peeling. However, the IMI method peels in a film-like or edge-like manner, which suppresses the diffusion of harmful substances and makes recovery easier. By primarily using a biodegradable water-soluble organic solvent, considerations for human health and the environment are taken into account. 【Features】 - The paint film softener does not contain chlorinated hydrocarbons that are not entirely harmless to humans. - Excellent biodegradability. - Does not lead to environmental destruction or pollution and is gentle on plants and animals. For more details, please contact us.

In conventional substrate treatment methods, excessive damage is inflicted on the structure, resulting in significant work in the subsequent process (repair). In the IMI method of substrate treatment, no excessive damage is done to the structure, which reduces the workload in the subsequent process (repair) and leads to cost reduction. 【Features】 - Softens the coating for easy removal - Achieves reduced environmental impact - Reduces workload in the subsequent process (repair) by not inflicting excessive damage on the structure - Cost reduction For more details, please contact us.

The IMI method is a technique that involves applying a safe biodegradable paint softener to deteriorated existing paint surfaces to soften the paint, followed by the injection of high-pressure hot water for removal. This method minimizes damage to the substrate, offers high efficiency, does not lead to environmental destruction or pollution, is gentle on flora and fauna, and allows for safe and hygienic removal work without compromising safety or sanitation. It is the definitive method for removing existing paint from architectural structures without excessively damaging the substrate and reducing costs in subsequent processes. 【Features】 - Minimizes damage to the substrate while removing existing paint. - Fast removal speed due to the use of hot water, leading to shortened construction periods and reduced costs. - Completely free of chemicals that impose environmental burdens, making it eco-friendly. - Low noise and low vibration, preventing dust pollution. - Particularly effective on elastic and acrylic paint films. For more details, please contact us.

By combining a softening agent with high-pressure hot water cleaning, we solve the issues associated with traditional exterior wall renovation work.

The coating removal method "IMI Method" is the most advanced system that solves the problems of conventional methods by combining a softener with high-pressure hot water washing. It removes existing coatings on steel structures and concrete structures equivalent to two types of substrate preparation. By applying the undiluted solution directly to the existing coating and leaving it for 1 to 24 hours, the bonding strength of the particles and the resin that connects them is weakened, making the removal process easier by also reducing adhesion strength. *Registered with NETIS! The following conventional issues are resolved with the IMI Method. 【Conventional Issues】 ■ Long construction periods, causing unnecessary damage to the substrate. ■ Concerns about large amounts of dust generation and negative impacts on the surrounding environment due to waste liquid. ■ High material costs. ■ Difficulty in recovering sand. *For more details, please contact us or download and view the catalog.

This paint stripping method is environmentally friendly as it does not use methylene chloride, which has a significant burden on the environment. It has a low odor and extremely low skin irritation, making it gentle for workers. The stripping process and post-treatment are also easy. 【Features】 - Significantly reduces environmental burden by not using methylene chloride, which is harmful to the environment. - Low odor and extremely low skin irritation improve the working environment. - Requires less usage compared to conventional products, making it efficient. - Can be applied by spray painting. Additionally, the softening effect of the coating lasts, making the stripping process easy. - Only softens the coating, so it does not become sticky, and post-treatment is easy. *For more details, please contact us or download the catalog.

The environment-adaptive coating film swelling softening stripping agent "Coating Film Stripping and Cleaning Method (IMI Method)" is compatible with oil-based phthalic acid, chlorinated rubber, epoxy, polyurethane, and fluorine-based coatings. However, it may not be sufficiently effective on inorganic zinc-rich primers, inorganic zinc-rich paints, and shop primers. 【Construction Procedure】 1. Spray 250g/m² of Nippon Paint Eco (for bridges) evenly. 2. Apply toilet paper over the Nippon Paint Eco (for bridges). 3. Leave it for 1 to 2 hours immediately after application, check the swelling state of the coating film, and then reapply 250g/m² evenly. 4. Ensure adequate ventilation and leave it for 6 hours, 24 hours (the next day), 30 hours, and 48 hours after application until the coating film becomes removable. Be aware of the time required for the coating film to soften in preparation for this work. 5. Remove the coating film with a scraper or similar tool. 6. Wipe the steel surface from which the coating film has been removed with water (using a damp cloth, etc.). 7. Confirm the drying of the steel and proceed with the painting work. *For more details, please contact us or download the catalog.

The environment-adaptive coating film swelling softening stripping agent "Coating Film Stripping and Cleaning Method (IMI Method)" is compatible with oil-based phthalic acid, chlorinated rubber, epoxy, polyurethane, and fluorine-based coatings. However, it may not be sufficiently effective on inorganic zinc-rich primers, inorganic zinc-rich paints, and shop primers. 【Construction Method】 1. Spray 250g/m² of IMI specification coating film softening agent evenly (first application). 2. Apply paper* over the IMI specification coating film softening agent. * Any general commercial product (such as toilet paper or water-soluble tissue paper) is acceptable. 3. Leave it for 1 to 2 hours immediately after application, check the swelling state of the coating film, and then reapply 250g/m² evenly (second application). 4. Ensure adequate ventilation and leave it for 6 hours, 24 hours (the next day), 30 hours, and 48 hours until the coating film is in a state that can be stripped. Be aware of the time it takes for the coating film to soften in preparation for this work. 5. Remove with a scraper or similar tool. 6. If a thick film remains, repeat steps 1, 2, 3, 4, and 5. 7. Wipe the steel surface from which the coating film has been removed with water (using a damp cloth, etc.). 8. Confirm the drying of the steel and proceed with the painting work.

The environment-adaptive coating film swelling and softening stripping agent "Coating Film Stripping and Cleaning Method (IMI Method)" is suitable for oil-based phthalic acid, chlorinated rubber, epoxy, polyurethane, and fluorine-based coatings. However, it may not be sufficiently effective on inorganic zinc-rich primers, inorganic zinc-rich paints, and shop primers. 【Features】 ○ Significantly reduces environmental burden by not using methylene chloride ○ More efficient with a smaller amount used compared to conventional products ○ Softening effect on the coating film lasts, making stripping work easier ○ Low odor and extremely low skin irritation, improving the working environment ○ Spray painting is possible For more details, please contact us or download the catalog.

The IMI softener developed by Imai Biso Co., Ltd. features a low-pollution design with extremely minimal dripping during application. It is a 50% aqueous solution, neutral with a pH of 7, environmentally friendly, economically advantageous, and extremely easy to process afterward. The peeled-off coating does not turn into a liquid but instead becomes sheet-like and flake-like. 【Features】 ○ Easy waste collection ○ Effective against most organic-based coatings ○ Minimal adverse effects such as corrosion on metals For more details, please contact us.

The IMI specification paint film softener is designed to have extremely low dripping during application, making it environmentally friendly. It achieves the same effect with approximately 60% of the amount compared to conventional products. The duration of the softening effect is long, and the number of applications and scraping required is less than with conventional products. It is compatible with various organic coatings, including EP, resin-based plaster, stucco, various multi-layer finishing paints, elastic coatings, and solvent-based paints. 【Features】 - Low odor and extremely low skin irritation, improving the working environment. - Does not dissolve the paint film, making recovery of the film easy. - Does not damage wood, metal, or cement-based inorganic substrates. - As a wet method, it does not produce dust like sanders. - Noise levels are also kept low. *For more details, please contact us or download the catalog.

The coating removal method "IMI Method" is the most advanced system method that solves the problems of conventional methods by combining a softening agent and high-pressure hot water washing. It removes existing coatings on steel structures and concrete structures equivalent to two types of substrate preparation. By applying the undiluted solution directly to the existing coating and leaving it for 1 to 24 hours, the binding strength of the particles and the resin that connects them in the existing coating is weakened, making the removal process easier by also reducing the adhesive strength. *Registered with NETIS! The following conventional issues are resolved with the IMI Method. 【Features】 ○ A method that uses organic solvents to soften and remove coatings ○ No dust generation ○ Biodegradable, with no harmful substances remaining on the removal surface ★ This method was used for the roof of the "Yoyogi National Gymnasium." *For more details, please contact us or download the catalog to view.