Last Updated： Aggregation Period:Mar 11, 2026～Apr 07, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 11, 2026～Apr 07, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 11, 2026～Apr 07, 2026
This ranking is based on the number of page views on our site.
61～90 item / All 123 items
Because the pipe is thin, we can solve the problem of the adhesive clogging or corroding in a short time!
The evolution of technology continues to bring about increasingly high-precision techniques, as well as ongoing challenges. At Daito Kasei, we are developing new technologies every day to meet such demands.
Can it meet all applications other than fluororesin coating?
The evolution of technology continues to increase high-precision techniques. At the same time, challenges continue to grow alongside technological advancements. At Daito Kasei, we are developing new technologies every day to meet such demands.
Here are some examples of our construction achievements. Fluorine coating construction case 2: Various industrial products.
This is an announcement from Daito Kasei Co., Ltd. regarding "Fluorine Coating Case Study 2: Various Industrial Products."
Fluororesin coatings can be recoated multiple times.
The fluoride resin coating that has lost its effectiveness can be stripped off once and then recoated.
Excellent non-stick and corrosion resistance! Information on adhesive energy and damage to resins is included.
We would like to introduce the characteristics of fluoropolymer coatings. The surface of fluoropolymer coatings does not allow most substances to adhere and repels both water and oil. Due to the water-repellent properties of fluoropolymers, they do not get wet, making them significantly resistant to dirt. Cleaning when dirty is also easy, which not only greatly reduces cleaning time but also significantly decreases the amount of water, solvents, and detergents needed for cleaning. Additionally, a fluoropolymer coating (fluoropolymer lining) of 0.3mm or more can provide "corrosion resistance (chemical resistance, anti-corrosion properties)." 【Non-stick properties (release properties, water repellency)】 ＜Material types: Contact angle of water (degrees) / Adhesion energy (dyn/cm)＞ ■PTFE: 114/43.1 ■ETFE: 77-88/75.2-97.7 ■Silicone: 90-110/47.8-72.7 ■Stainless steel mirror finish: 60/109.0, etc. *For more details, please refer to the external link page or feel free to contact us.
Introducing the main products that require fluororesin coatings and examples of applications by product!
Here are the main products that require fluororesin coating. 【Food Manufacturing】 ■Non-stick - Mochi: rollers, hoppers, screws, knives, etc. - Senbei: baking plates, scrapers, molds, etc. - Bread: baking sheets, bread cases, molds, etc. - Rice: rice cookers, stirring blades, hoppers, screws, etc. - Candy, caramel: shoots, molds, knives, plates, etc. *For more details, please refer to the external link page or feel free to contact us.
Re-coating is possible multiple times! We also introduce a peeling method that reduces the burden on the substrate.
Fluororesin coatings can be "re-coated" multiple times. When re-coating with fluororesin, it is necessary to first strip the current fluororesin coating. This is done using sandblasting, which inevitably takes a long time. Therefore, for plates under 1mm or precision parts, it is essential to choose a coating that will not affect the substrate even after stripping the fluororesin coating. At Daito Kasei, we also offer processing methods that do not burden the substrate during re-coating. 【Stripping Methods for Each Coating】 ■ Polyurethane Coating - Soak in solvent to strip → Sandblast ■ Ceramic Coating - Clean → Heat treatment → Sandblast ■ Polyethylene Coating - Heat until the surface softens, then strip → Heat treatment → Sandblast *For more details, please refer to the external link page or feel free to contact us.
[IPROS Exclusive Project] Fluororesin Coating for Plastic and Rubber!! FU-1000 Series.
The FU-1000 series of fluororesin coatings features excellent non-stick properties, lubricity, water repellency, and dirt resistance. It is a low-temperature curing fluororesin coating for plastics and rubber. For more details, please contact us or refer to the catalog. ＝＝＝＝＝＝＝≪Campaign Information≫＝＝＝＝＝＝＝＝＝ ◎Everyone who contacts us will receive a sample!◎ 【Conditions for Receiving the Gift】 Please fill in the following two points in the 'Inquiry Details' section at the bottom of the page when contacting us. ■Material to be coated ■Required properties *Please select from the options below. Take this opportunity to try it out! ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ 【Materials for Coating】 - Stainless steel - Aluminum - Iron - Rubber 【Required Properties】 - Corrosion resistance - Non-stick properties - Heat resistance - Low friction - Sliding properties - Insulation - Conductivity - Ion leaching prevention - Wear resistance - Water repellency - Antibacterial properties - ECO coating - Others *We will send a comprehensive catalog free of charge to those who request it.
I recommend this when you want to give various materials a slippery and non-stick quality!
We offer a variety of options to meet requests such as wanting greater corrosion resistance and conductivity, depending on applications in the kitchen and industrial fields.
Fluororesin coating agent for stain prevention coating
A coating agent that protects against various stains and blemishes.
Chemiron can be cured at room temperature and medium temperature, allowing it to be applied to plastics, rubber, and large equipment.
Semiconductive grade Friction grade Mold release grade Paint mist removal grade Chemiron can modify various materials. - I want stable semiconductive functionality. - I want to enhance wear resistance and lubrication. - I want to improve the release properties of resin molds. - I want to easily remove paint mist from paint booths, hangers, etc. - I want to improve chemical resistance. - I want heat resistance. - I want to make it easier to remove dirt. We respond to a variety of requests like these.
It is a clear type, so it does not affect the color of the base. By using a primer, it can be adapted to a wide range of materials.
- It is a two-component coating agent that dries at room temperature, but it takes about 7 days to fully cure (at a temperature of about 25°C). - It can be applied using standard methods (spray, brush, roller). - It is non-stick, has good slip properties, and excellent abrasion resistance. - It has excellent stain resistance and weather resistance. - It has excellent water-repellent and oil-repellent properties.
We can accommodate various requests, such as wanting greater corrosion resistance and conductivity, depending on applications in the kitchen and industrial fields.
【Features】 ■ Non-stick ■ Slippery ■ Resistant to chemicals ■ Heat resistant The base materials that can be processed include metals such as aluminum, iron, and stainless steel. Please choose materials that can withstand a bonding temperature of 180°C to 380°C. *For more details, please contact us.
Powerful fan cooling
The Teflon-coated conveyor makes it difficult for steamed rice to stick, and a powerful fan ensures suction. Reliable maintenance is possible with three crushers. The intermediate crusher reverses to turn the steamed rice over, and it has a built-in cleaning device for the net.
It is possible to stabilize by installing the main body on the floor! This can reduce the frequency of cleaning.
We would like to introduce the "Single Bucket Strainer" that we handle. It can be stabilized by being installed on the floor surface. It is placed before the pump or nozzle. There are "UC Type Strainer (for water)" and "SO Type Strainer (for oil)," which can filter more debris compared to Y-type or T-type, thereby reducing the frequency of cleaning. 【Features】 ■ Installed before the pump or nozzle ■ Can be stabilized by being installed on the floor surface ■ Capable of filtering more debris compared to Y-type or T-type, reducing the frequency of cleaning *For more details, please refer to the PDF document or feel free to contact us.
Discover the excellent properties of fluororesin coatings, and Shine Craft will solve your problems!
The characteristics of fluoropolymer resins include "non-stick properties" that make it difficult for substances to adhere, "low friction coefficient" that allows for easy sliding, "electrical properties" such as anti-static and static prevention, "heat resistance" that can be used over a wide range from 260°C to -260°C, "non-wettability" that repels water and oil, and "chemical resistance" that is not eroded by chemical solutions. Additionally, materials that can be coated with fluoropolymer resins include various metals such as aluminum, iron, stainless steel, copper, and brass, as well as a variety of other materials like glass, ceramics, rubber, and plastics. We have also increased our processing achievements for materials that have been difficult to process in the past, such as silicone rubber, ceramics, and plastics, by using our special undercoating treatment. There may be a chance for "that material" you were about to give up on. ◆ Regarding Inquiries ◆ When making an inquiry, it would be smooth if you could provide the following information: 1. The properties of the substrate to be coated (material, shape, size, etc.) 2. The purpose of the coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) * If possible, providing drawings would be helpful for estimating and calculations.
Attention pharmaceutical and hospital personnel! Utilizing the chemical resistance of fluoride coatings against strong acids, we can prevent corrosion in chemical tanks. *Case studies available.
Shine's Blue Armor exhibits truly remarkable barrier properties (corrosion resistance) under temperature conditions ranging from -196°C to 178°C. We encourage you to use the Blue Armor coating, which has excellent characteristics for your various facilities. Please use this before contamination from chemicals and gases causes losses to your company, both in terms of time and finances! 【Issue】 Problematic part: The chemical tank, which is part of the pharmaceutical manufacturing equipment, had the potential for corrosion and contamination. Customer: A raw material manufacturer. 【Solution】 ◆ Coated the pharmaceutical manufacturing equipment of the raw material manufacturer with fluororesin coating (Blue Armor). ↓ ↓ ↓ ◆ Prevented corrosion of the chemical tank (equipment maintenance) and contamination with a fluorine coating that has chemical resistance to strong acids.
It is a revolutionary antibacterial and antifungal agent developed in Japan.
"PacificBeam MOLD" is a groundbreaking antibacterial and antifungal agent conceived in Japan. Its exceptional antibacterial properties demonstrate remarkable suppression and prevention effects even against fungi (molds) that have been difficult to combat until now. Being a non-leaching type, its effectiveness lasts for a long time, and with its repellent effect and unique composite technology, it achieves a broad spectrum of over 2,000 types, including all approximately 60 types of mold commonly found in general buildings (at a world-class level). It is an eco-friendly and safe antifungal and antibacterial agent that does not harm the ecosystem while exhibiting outstanding effectiveness against mold. 【Features】 ○ Exceptional effectiveness and durability ○ High safety ○ Rich product lineup ○ Wide range of application fields For more details, please contact us or download the catalog.
Excellent chemical resistance and heat resistance! It can be used as a filter for coarse filtration.
The NR0515 fluororesin (PTFE) net is a product made by cutting PTFE sheets into a diamond-patterned mesh. It has excellent chemical resistance and heat resistance, making it suitable for use as a filter in coarse filtration devices (related to food and construction industries). Due to its low friction resistance, it can also be used as a transport sheet (in wet environments) to move heavy samples smoothly without impact, like "shura." Additionally, it is convenient as a spacer. 【Features】 - Product made from PTFE sheets in a mesh pattern - Excellent chemical resistance and heat resistance - Usable as a filter or transport sheet - Low friction resistance - Convenient as a spacer For more details, please contact us or download the catalog.
The PTFE-made soroban-type seal fixes PTFE or PFA tubes by crimping them from the outer diameter!
We offer a "Three-Seal Joint" that securely fixes slippery, rigid pipes using a structure that sandwiches O-rings and PTFE rings. In the case of glass or stainless steel pipes, unlike resin tubes, the soroban-type seal cannot bite in, which can lead to slippage and disconnection. The three-seal joint fixes the outer diameter of hard piping by sandwiching two FKM O-rings with a PTFE ring, making it less prone to slipping and providing a secure hold compared to traditional PTFE soroban-type seals. 【Product Lineup】 ■ NR1089 PTFE Three-Seal Type I Joint ■ NR1090 PTFE Three-Seal Type L Joint ■ NR1091 PTFE Three-Seal Type T Joint *For more details, please download the PDF or feel free to contact us.
Significantly reduces the effort required for cleaning and inspection compared to conventional bucket strainers!
The Glow Bucket Strainer is a product that allows for easy and safe cleaning and inspection. When opening the upper cover, there is no need for any bolt or nut tightening work; the upper cover can be removed with a single touch. Maintenance can be performed without tools for body diameters up to 150A. The product weight has been reduced to about one-third compared to conventional flange types, making it easier to handle. Since the face-to-face dimensions and filtration area can be customized, it can be replaced in existing spaces. 【Features】 ■ Easy and safe cleaning and inspection ■ Upper cover can be removed with a single touch ■ Safety is ensured during opening operations from above ■ Lightweight and compact ■ Face-to-face dimensions and filtration area can be customized *For more details, please refer to the PDF document or feel free to contact us.
Significant reduction in cleaning and inspection efforts! Maintenance can be done without tools.
The Glow Bucket Strainer is a groundbreaking strainer that maximizes the performance of our "Glow Joint." During open cleaning or inspection, it allows for the removal of the upper cover without any need for bolt and nut tightening, enabling one-touch operation. Maintenance can be performed without tools for body diameters up to 150A. The product weight has been reduced to about one-third compared to conventional flange types, making it easier to handle. 【Features】 ■ Easy and safe cleaning and inspection ■ One-touch removal of the upper cover ■ Cover attachment and detachment time is less than about 1/10 compared to flange types ■ Lightweight and compact ■ Customizable spacing dimensions and filtration area ■ Safe and easy operation by performing open work from the top *For more details, please refer to the external link page or feel free to contact us.
For pharmaceutical manufacturers! We custom-manufacture products with enlarged mouth openings!
We custom-manufacture "graduated flasks for tablets" for pharmaceutical manufacturers. Are you having trouble with the small neck of graduated flasks with a small capacity (5-25ml)? Have you ever found that the small inner diameter of the neck prevents you from putting tablets into the graduated flask? Generally, it is said that a tablet size of about Φ7-8mm is easy to swallow. We manufacture products with a larger neck as a custom order. 【Features】 ■ Custom manufacturing of products with a larger neck ■ Standard inner diameter: Φ8mm / Custom product inner diameter: Φ11.8mm (minimum part) *For more details, please refer to the PDF document or feel free to contact us.
Directly engraved numbering. For improved management efficiency and to prevent mix-up errors.
Our company, which manufactures glass volumetric flasks and other items, also offers custom "sandblasting numbering processing." We can accommodate not only equipment numbers and dates but also lot number engravings. Numbering contributes to the efficiency of history management and sample management. It helps prevent human errors such as label peeling and mix-ups. 【Features】 ■ A lineup of volumetric flasks, hollow pipettes, etc. ■ Custom direct engraving of equipment numbers using sandblasting ■ Traceability and issuance of internal inspection reports available (for a fee) ■ Established quality management system with ISO 9001 certification *For more details, please refer to the materials. Feel free to contact us with any inquiries.
Achieving ultra-non-stick properties that do not adhere various adhesives! It shows good adhesion to various metals and rubber.
The "KP-10 Series" is an inorganic ultra-non-stick coating system that features "Si-O bonds." This system forms a rough surface texture on the coating film through special aggregates contained in the base coat. By combining a top coat of inorganic silicate ceramic with high non-stick properties that does not contain free silicone compounds, it achieves "ultra-non-stick performance" that prevents various adhesives from adhering. 【Features】 ■ Ultra-non-stick performance effective against various adhesives ■ Coating film that does not contain free silicone compounds ■ Good adhesion to various metals and rubber The KP-10 Series consists of three types, each with different non-stick performance and surface roughness. Technical documents detailing the characteristics of each series are currently available. *For more details, please refer to the PDF document or feel free to contact us.
![[Case Study] Coating to Improve Release Properties of Tire Molds](https://image.www.ipros.com/public/product/image/c7a/2000611412/IPROS18716952501438103002.png?w=280&h=280)
Enabling coating down to the details! A case where durability has increased, resulting in reduced depreciation costs.
We would like to introduce a case where we solved the problems faced by a manufacturer of retreaded tires. [Problems] ■ Coating peels off in a short period ■ Performance lifespan is short and needs improvement [Improvements] Since studless tires have blades inserted into the mold, the structure is complex, and coatings often do not reach the finer details. We have made it possible to coat even the finer details by using a special painting gun, adjusting the number of painting cycles, and maintaining a constant temperature of the mold during painting. Additionally, we have successfully achieved durability by obtaining endurance data from tests across various types and using carefully selected coating materials. *For more details, please refer to the PDF document or feel free to contact us.
![[Case Study] Prevention of Silicone Packing Adhesion](https://image.www.ipros.com/public/product/image/137/2000611414/IPROS76946187630002425040.gif?w=280&h=280)
Preventing packing damage! Introducing a case where the entire surface of the packing was coated!
We would like to introduce a case where we solved the problems faced by packing manufacturers and sterilization device manufacturers. 【Problems】 Silicone packing sticks to the opposing side and gets damaged. The silicone itself is very difficult to treat on the surface, making it hard to adhere. Additionally, unlike coatings on metals, packing materials stretch, so if the paint has poor followability, it often results in cracking or peeling. 【Effects】 We proposed our silicone-based fluororesin coating (our product number: KP-421-1) to the customer. This coating adheres well to silicone materials and forms a flexible and highly adhesive film, especially to rubber. As a result of coating the entire surface of the packing, sticking has improved, and the issue of damage has been eliminated. *For more detailed information, please refer to the PDF document or feel free to contact us.
![[Case Study] Improvement of Durability Against Alkaline Solutions](https://image.www.ipros.com/public/product/image/571/2000611418/IPROS37069162258700483011.jpeg?w=280&h=280)
Solving major issues that occur a few times a year! A case where resistance to alkaline solution was developed, preventing peeling.
We would like to introduce a case study that solved the problems faced by cleaning equipment manufacturers, semiconductor equipment manufacturers, and plating equipment manufacturers. 【Problem】 ◆ Fluororesin is coated, but when an alkaline cleaning solution is used in the cleaning process, the coating peels off immediately. 【Improvement】 Many primers (adhesives) for fluororesin coatings expand in alkaline conditions, and depending on the concentration, there are many cases where they peel off quickly. Additionally, alkaline solutions can penetrate through pinholes (small holes) in the painted area, eventually pushing up the coating from the inside and causing it to peel off. At our company, we carefully conduct hearings with customers about their usage environment, and if it is determined that a high concentration alkaline solution is being used, we utilize a special primer that is resistant to alkaline solutions. *For more details, please refer to the PDF document or feel free to contact us.
![[Explanatory Material] Basic Knowledge of Fluororesin Coating](https://image.www.ipros.com/public/product/image/582/2000611445/IPROS30833489995464548359.jpeg?w=280&h=280)
Introducing the basics of fluoropolymer resins! An introductory material for those new to coatings.
This document introduces the basic knowledge about fluoropolymer coatings. Fluoropolymers are excellent resins with chemical properties such as low friction coefficient, heat resistance, and chemical resistance, and are utilized in various applications. While fluoropolymer-coated frying pans are well-known, their applications extend to many fields, including construction and semiconductors. This document provides fundamental knowledge ranging from the history of fluoropolymers to examples of their applications. We encourage you to read it. [Contents] ■ History of fluoropolymers ■ Diagrams showing the transformation from monomers to polymers, and the molecular formula of representative fluoropolymers ■ Information on C2F4 and PTFE (polytetrafluoroethylene) *For more details, please refer to the PDF document or feel free to contact us.
Solving the problems of many manufacturers! We provide detailed introductions to solutions and their effects.
This document is a collection of 10 case studies that address various coating issues faced by different manufacturers. It includes cases that resolved problems such as "poor mold release," "paint peeling," and "damage to gaskets." Starting with examples involving fluoropolymer coatings, it also features cases related to ceramic coatings and inorganic coatings. We invite you to read it. [Featured Cases] ■ Coatings to improve mold release for tire molds ■ Prevention of sticking for silicone gaskets ■ Paint without blasting ■ Coatings suitable for copper materials such as heat sealers ■ Coatings for functional food containers *For more details, please refer to the PDF document or feel free to contact us.
