Construction Method Product List and Ranking from 353 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.

Construction Method Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.

  1. 水研 Shiga//Building materials, supplies and fixtures manufacturers
  2. 東網工業 Niigata//Building materials, supplies and fixtures manufacturers
  3. Taiyo Kisokogyo Co.,Ltd. Aichi//General contractors and subcontractors
  4. 4 桐井製作所 Tokyo//Building materials, supplies and fixtures manufacturers
  5. 5 ASAHI KASEI ADVANCE CORPORATION 環境資材事業部 Tokyo//Building materials, supplies and fixtures manufacturers
Go to Company Ranking

Construction Method Product ranking

Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.

  1. Install the valve without stopping the water! 'EM Continuous Water Valve Method' 水研
  2. SQ method 桐井製作所
  3. Crushed Stone Utilization Basket Method "Crushed Stone Box - saisekibako -" 東網工業
  4. 4 Coating material, coating agent "Friction Cutter" ASAHI KASEI ADVANCE CORPORATION 環境資材事業部
  5. 5 50mm Dedicated Continuous Water Valve 'Sgate MN (Mini)' 水研

Construction Method Product List

226～240 item / All 575 items

Displayed results
Protective agent "WATER SHIELD"

Protective agent "WATER SHIELD"

The curing time after application is only 2 hours! A protective agent that does not allow water intrusion.

"WATER SHIELD" is primarily composed of silane-siloxane and forms a water-repellent layer on the surface of concrete, protecting the surface of concrete structures by preventing the intrusion of moisture and chloride ions from the outside. The formation of the water-repellent layer is completed with just 2 hours of curing after application. This shortens the curing time after application, making process management easier. Additionally, the likelihood of reapplication due to the leaching of the impregnating agent during sudden heavy rainfall is reduced. 【Features】 ■ Curing time after application is only 2 hours ■ Does not freeze even at -40°C ■ A colored type for application certification is also available *For more details, please download the PDF or feel free to contact us.

  • Slope protection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Company Information (We can accommodate everything from small items to assembled products.)

Company Information (We can accommodate everything from small items to assembled products.)

We will respond to our customers' requests to turn their troubles into something good.

We will respond to our customers' troubles and turn them into satisfaction. For more details, please refer to the PDF download below. You can trust us with blasting and painting. Harada Ironworks Co., Ltd. TEL: 082-232-2445 FAX: 082-293-0286 Contact: Tao Mobile: 090-3742-9768 Email: bousei@harada-tekkou.co.jp Harada Ironworks Hiroshima Official Link

  • paint
  • Sign construction
  • Dam construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Welding: TIG Welding Edition

Welding: TIG Welding Edition

Welding is essential in the can manufacturing and assembly field. This time, I would like to introduce TIG welding.

Welding is essential in the can manufacturing and assembly field. This time, I would like to introduce TIG welding. For more details, please refer to the PDF download below. For anything related to blasting and painting, please leave it to us. Harada Iron Works Co., Ltd. TEL: 082-232-2445 FAX: 082-293-0286 Contact: Tao Mobile: 090-3742-9768 Email: bousei@harada-tekkou.co.jp Harada Iron Works Hiroshima Official Link

  • Rust Inhibitor
  • Special Construction Method
  • paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Processing - Drilling Process Edition

Processing - Drilling Process Edition

In machining, methods for drilling include tapping and reaming.

There are various types of processing. This time, I would like to explain hole processing (tapping and reaming). For more details, please refer to the PDF download below. For anything related to blasting and painting, please leave it to us. Harada Iron Works Co., Ltd. TEL: 082-232-2445 FAX: 082-293-0286 Contact: Tao Mobile: 090-3742-9768 Email: bousei@harada-tekkou.co.jp Harada Iron Works Hiroshima Official Link

  • Rust Inhibitor
  • Steel construction
  • Plastering and painting work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Causes of coating delamination

Causes of coating delamination

I will explain the reasons why the coating peels off.

We compared samples with and without a primer. For surface preparation, we degreased with cleaning thinner and roughened the surface with sandpaper. The painting specifications used an epoxy-modified resin paint for the primer and an acrylic-modified phthalic resin paint for the topcoat. After allowing sufficient drying time, tests were conducted. When removing the masking tape, the area without primer had the paint peel off with it. The primer has a high adhesion to the substrate, and when used together with the topcoat, it maximizes the performance of the paint. Skipping the primer may result in a visually appealing finish, but the performance of the paint is compromised. By performing blast treatment, a stronger paint film can be formed. Omitting the primer reduces the adhesion of the paint, making it more prone to peeling and deterioration. The combination of primer and topcoat allows the paint to adhere to the surface, enhancing the strength and durability of the paint film. The primer is an essential process for maximizing the performance of the paint and ensuring quality. While it is possible to shorten the process by omitting it, this will affect the durability and quality of the coating.

  • Rust Inhibitor
  • paint

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Inorganic mineral composite modifier "Hardlex"

Inorganic mineral composite modifier "Hardlex"

Transform weak soil into strong soil by hardening it! With neutral solidification, it becomes soil where plants can thrive!

"Hardrex" is an inorganic mineral composite modifier that improves handling and compaction density immediately after mixing with the target soil, due to its instant water absorption effect and the modification effects of hydration reactions and agglomeration granulation. It begins to generate a large amount of ettringite within a few hours of mixing, ensuring trafficability and initial strength through the effect of linking soil particles, making it suitable for heavy machinery operation. Furthermore, it continuously transitions into a series of chemical reactions such as pozzolanic reactions and carbonation reactions, increasing its binding strength over time, leading to long-term stability. 【Features】 ■ Immediate effect ■ Cost-effective and quick construction ■ Achieves strength even with difficult-to-stabilize soils ■ Low alkalinity, environmentally friendly ■ Resistant to disasters such as earthquakes and heavy rains ■ Improvement in trafficability *For more details, please refer to the PDF document or feel free to contact us.

  • Ground improvement

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
A business service that handles oil pollution and heavy metal contamination as a one team.

A business service that handles oil pollution and heavy metal contamination as a one team.

We propose solutions for the proper treatment and utilization of contaminated soil!

The Yoshimitsu Group is a member company of the General Incorporated Association for Soil Environmental Conservation Technology. They possess neutralization and immobilization modifiers such as the "Metal Shut Series" and neutral modifiers like the "Hardrex Series." The association offers business services that are handled as a single team. Our services provide solutions for the proper treatment and utilization of contaminated soil and waste. [Proposal Contents] ■ Naturally occurring heavy metal unsuitable soil ■ Various types of contaminated soil from human activities (VOC, oil, heavy metals) ■ Soil mixed with waste and regeneration of final disposal sites ■ Recycling and proper treatment of waste ■ Reuse of soft soil, liquefaction prevention, special ground improvement, and fluidization treatment *For more details, please refer to the PDF materials or feel free to contact us.

  • Ground improvement

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
T-BAGS vibration reduction method

T-BAGS vibration reduction method

Vibration absorption of buildings through the sliding of T-BAGS! Seismic isolation foundation structure and seismic isolation method using it.

The "T-BAGS Seismic Isolation Method" involves laying two layers of T-BAGS, sandwiched with a special sheet, beneath the floor slab and under the foundation. During an earthquake, the sliding of the T-BAGS absorbs the building's vibrations. Due to its extremely high durability, regular maintenance is not required. Additionally, by combining it with the TNF method, it is possible to construct on soft ground and reduce installation costs. 【Features】 ■ Two layers of T-BAGS sandwiched with a special sheet laid beneath the floor slab and under the foundation ■ Applicable to soft ground ■ Low cost ■ Maintenance-free ■ Vibration reduction: from 300gal–800gal to below 200gal–250gal *For more details, please refer to the PDF document or feel free to contact us.

  • Earthquake-resistant construction method
  • Ground foundation construction method
  • Ground improvement

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
TNF+ Method

TNF+ Method

A new construction method applicable to mid-rise and high-rise buildings! Utilization of geothermal energy such as heat pumps is possible.

The "TNF+ (Plus) Method" enhances the "TNF Method (a shallow improvement method with a grid-like structure)" by applying columnar improvements to the bottom layer, making the ground even more solid and protecting buildings from weak ground. The improved layer can be formed into various shapes, allowing for the free installation of underground structures. At the time of land return, a pipe water jet is injected into the installed pipes, instantly crushing the improved body using water pressure. 【Features】 ■ The columnar improvement section encloses the soil in the lower part of the improved layer, achieving a solid ground. ■ A new method applicable to mid-rise and high-rise buildings. ■ The improved layer can be formed into various shapes, allowing for the free installation of underground structures. ■ By installing pipes in the columnar section, geothermal utilization such as heat pumps is possible. ■ High-pressure water is injected from the pipes installed in the columnar section to crush the improved body. ■ The improved body can be dismantled in a short period, reducing the cost of restoring the land to its original state. *For more details, please refer to the PDF materials or feel free to contact us.

  • Ground foundation construction method
  • Ground improvement

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
WT method

WT method

Application to the installation of various facilities! Construction is easy even on soft ground or ground with high groundwater levels.

The "WT Method" is a construction technique that improves underground areas such as parking lots using the TNF method to create a reservoir consisting of walls on four sides and a bottom slab. By forming the contact surface between the bottom slab and the underlying ground in a grid pattern, it maintains the stability of the structure even on soft ground. Additionally, since the improved ground serves as a container, construction work such as rebar and concrete is almost unnecessary. It allows for construction in a shorter period compared to conventional storage facilities. 【Features】 ■ Easy to construct even on soft ground or ground with a high water table ■ Almost no need for construction work such as rebar and concrete since the improved ground acts as a container ■ Allows for construction in a shorter period compared to conventional storage facilities ■ Can be freely shaped, enabling the installation of oil tanks and piping systems *For more details, please refer to the PDF materials or feel free to contact us.

  • Ground foundation construction method
  • Ground improvement

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
WT method + TNF method

WT method + TNF method

Integrating the ground behavior of gas stations on weak ground! Protecting buried facilities from earthquakes and other hazards.

We introduce a suitable construction method for the burial of tanks and piping at gas stations. By applying the "WT method," we form a container that houses buried facilities such as tanks in improved ground. By combining it with the "TNF method," we integrate the ground behavior of gas stations on soft ground, protecting buried facilities from earthquakes and ground subsidence. Additionally, it eliminates the need for sheet piles and supports, achieving a reduction in construction time and costs. 【Features】 ■ Suitable for soft ground - No uplift due to the absence of piles, preventing damage to piping - Applying the TNF method under buildings and in external areas prevents damage to underground facilities ■ Achieves low cost and reduced construction time - Eliminates the need for sheet piles and supports, resulting in reduced construction time and costs *For more details, please refer to the PDF materials or feel free to contact us.

  • Ground foundation construction method
  • Ground improvement

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
TNF method

TNF method

Over 1,300 achievements nationwide! No need for pile work, formwork, or ground improvement work.

At Yoshimitsu Corporation, we carry out ground improvement work to create artificial bedrock in soft ground across the country, tailored to the specific buildings. Compared to pile foundations, we achieve approximately 30% cost reduction. Since pile work, formwork work, and ground preparation work are not required, the construction period is shortened by 50%. Please feel free to contact us when you need our services. 【Features】 ■ Approximately 30% cost reduction compared to conventional methods (pile foundations) (for a floor area of 1000 m² and pile length of 30 m) ■ Construction period shortened by 50% compared to conventional methods, as pile work, formwork work, and ground preparation work are not required (for a floor area of 1000 m² and pile length of 30 m) ■ No piles used, resulting in reduced demolition costs when dismantling the building *For more details, please refer to the related links or feel free to contact us.

  • Ground foundation construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FP-BESTEX method

FP-BESTEX method

We have further improved the BESTEX method, which was developed with the aim of achieving simple and reliable construction!

The "FP-BESTEX method" is a type of pre-boring expanded root solidification method, similar to the BESTEX method. It involves injecting a drilling stabilizing fluid with a water-cement ratio of 150% and a milasepia cement ratio of 0.75% while creating a soil-cement-like drilling hole to the specified depth, after which a pile is embedded. This method offers greater frictional resistance than conventional methods, and it can accommodate a wide range of N values from less than 5 to over 50 at the pile tip ground. It can be utilized not only as a support pile but also as an economical foundation pile that does not rely on support layers such as friction piles or intermediate support piles. 【Features】 ■ High reliability with significant vertical bearing capacity ■ Certain bearing capacity ■ Usable as a support pile *For more details, please download the PDF or contact us.

  • Ground foundation construction method
  • Pile and foundation work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HI-BEX method

HI-BEX method

The HIBEX method that has obtained the "Quality Evaluation of Pile Foundations" conducted by Better Living.

The "HI-BEX Method" is a renewed version of the BESTEX Method, which was certified under the former Article 38, and it is a new concept method that enhances performance, construction quality, and reliability. Load tests are conducted in situations where there is a clayey ground beneath the support layer, and the bearing capacity performance is analyzed. It specifies the handling of cases where the support layer is thin. 【Features】 ■ Specifies the handling of the ground beneath the tip of the pile ■ Construction management guidelines based on Ministry of Land, Infrastructure, Transport and Tourism Notification No. 468 of 2016 ■ All approved construction companies have obtained construction quality evaluations from third-party organizations *For more details, please download the PDF or contact us.

  • Pile and foundation work
  • Ground foundation construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hyper-Straight Method

Hyper-Straight Method

We achieve cost reduction without using specially shaped piles or construction machinery!

The "Hyper-Straight Method" is a simple method for straight excavation and straight piles that has evolved further based on the experience gained from the HIT method, BESTEX method, and FP-BESTEX method. The piles used are standard straight piles (such as PHC, PRC, SC) and enlarged head piles, and no special-shaped piles are used. It exhibits approximately 1.5 times the bearing capacity performance compared to the old construction minister certified method (old Article 38 certification), contributing to a reduction in the number of piles used and achieving cost savings. 【Features】 ■ Reliable construction with stability ■ Simple and highly versatile ■ High bearing capacity, effective for cost reduction *For more details, please download the PDF or contact us.

  • Pile and foundation work
  • Ground foundation construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Construction Method

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.