nozzle(3m) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

nozzle Product List

61～75 item / All 76 items

Displayed results
2-fluid nozzle "Fan-shaped nozzle (small amount spray / ultra-compact) SCBIMV"

2-fluid nozzle "Fan-shaped nozzle (small amount spray / ultra-compact) SCBIMV"

Super compact type! A small spray fan nozzle with a wide flow adjustment range.

The "Fan-Shaped Nozzle (Small Amount Spray / Ultra Compact) SCBIMV" consists of four components: nozzle tip, core, cap, and adapter, and is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of less than 100μm. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the outer circumference in an internal mixing air type.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Switchable between two spray patterns: uniform & triangular distribution ○ Minimum spray flow rate among two-fluid systems ○ Wide flow adjustment range ○ Ultra compact type with a total length of approximately 42mm ○ Equipped with ON-OFF control function For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air Nozzle "Fan-Shaped Nozzle (Disassemblable) VZ"

Air Nozzle "Fan-Shaped Nozzle (Disassemblable) VZ"

Steam injection is also possible! An air nozzle that accommodates various injection amounts with chip replacement.

The "Fan-Shaped Nozzle (Disassemblable) VZ" is an air nozzle composed of three parts: a spray tip, a cap, and an adapter. Only the worn spray tip can be replaced, while the cap and adapter are compatible with standard fan-shaped nozzles (for liquids) in three sets. It is capable of spraying not only air but also steam. It is used in industries such as steel, machinery, electronics, paper, pulp, printing, food, and transportation. 【Features】 ○ Compressor specification ○ Wide-angle spray (spray angle 90°) covers a large area ○ Various spray volumes can be accommodated by replacing the tip ○ Steam spraying is also possible ○ Disassemblable type, made of metal For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Small Flat Air Nozzle for Blowers 'WindJet YBLW'

Small Flat Air Nozzle for Blowers 'WindJet YBLW'

Achieve high impact and high flow rate blowers even at low pressure! Significant energy savings compared to compressor air.

The "WindJet YBLW" is a compact air nozzle for blowers that enables high impact and high flow rates even at low pressure, thanks to its unique structure that allows for efficient air rectification. By switching from compressor air, significant energy savings can be achieved. Additionally, despite its flat and compact shape, it has a discharge width of 53mm, and we also offer headers with nozzles arranged in parallel to accommodate longer lengths. 【Features】 ■ A fault design that allows air to escape even if objects hit the nozzle discharge area ■ Lower power consumption compared to compressor air systems ■ Compatible with long and complex shapes using headers and adjustable hoses *For more details, please refer to the catalog. Feel free to contact us with any inquiries. Spraying Systems, a global brand for spray nozzles, offers nozzles suitable for various applications based on over 90,000 items of proven performance. *For information on spraying nozzles, please download the PDF or contact us.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Three-group standard fan-shaped nozzle "Yamagata distribution nozzle (disassemblable) V"

Three-group standard fan-shaped nozzle "Yamagata distribution nozzle (disassemblable) V"

Ceramic three-group shape! Disassemblable serrated distribution nozzle that generates a fan-shaped spray.

The "Yamagata Distribution Nozzle V" can generate a fan-shaped spray with a Y-shaped flow distribution that is strong in the center and gradually weakens towards both ends. When overlapping the patterns at both ends during multiple nozzle arrangements, the flow distribution becomes uniform across the entire width. This nozzle consists of three parts: a spray chip, a cap, and an adapter, and only the worn spray chip can be replaced. 【Features】 ○ Disassemblable Yamagata distribution nozzle ○ Ceramic used in the spray chip nozzle section ○ Strainer is standard on small flow products and can be removed ○ The cell team consists of ceramic and resin spray chips → The ceramic nozzle is molded with a robust engineering plastic For more details, please contact us or download the catalog.

  • Aggregates and crushed stone
  • Water and sewerage pipe fittings
  • Roof and gutter construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Bar coater (manual test coater) / wire bar

Bar coater (manual test coater) / wire bar

We have a variety of sizes available: 1/4 inch, 1/2 inch, and 3/8 inch. ★ We also handle wireless bars.

Easy and simple! Manual printing test machine bar coater. It can be used as a tool for creating color samples and evaluation samples. Bar Coater (Wire Bar / Meyer Bar) 【Features】 ■ A device for evenly applying liquids such as inks, paints, and adhesives. ■ A stainless steel rod is wrapped with stainless steel wire. ■ The grooves of the wire allow for adjustment of the liquid application amount, achieving a stable film thickness. ■ The film thickness varies depending on the wire gauge (diameter). ■ It can be easily used with both hands. ■ It can uniformly apply a consistent film thickness with a small amount of ink. ■ It can be applied to flexible materials such as copper foil, aluminum foil, plastic film, paper, and fabric. Purchase the bar coater here ▼ Tofu LABO http://www.tofulabo.com/ Download the catalog here ▼ https://www.matsuo-sangyo.co.jp/catalogs/ For more details on the bar coater, click here ▼ https://www.matsuo-sangyo.co.jp/products/bar-coater/

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Multi-Channel Jet FL-600STW (Air Nozzle)

Multi-Channel Jet FL-600STW (Air Nozzle)

Sister product of the best-selling Rehiller air nozzle FL-600E, offered in stainless steel 316L, wide type FL-600ST.

Lechler multi-channel jet (air nozzle) The air emitted is laminar, which not only minimizes impact force but also reduces noise levels. Additionally, by achieving laminar flow, the amount of air consumed during use can also be minimized. In other words, it is an energy-saving product. The multi-channel jet model FL-600STW generates a very wide and powerful impact force. This nozzle is made of stainless steel 316L, allowing it to be used in high-temperature environments. The protruding tip of the nozzle prevents air from penetrating human skin. This nozzle complies with OSHA standards. *Lechler GmbH is a German spray nozzle manufacturer.*

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Spray nozzle "King Nozzle" TYPE-MY

Spray nozzle "King Nozzle" TYPE-MY

A fine mist with a large flow rate (1L/min) can be obtained at a water pressure of approximately 0.2MPa.

The 【TYPE-MY】 is a metal spray nozzle that can produce a large volume of fine mist at a low pressure of 0.2 to 0.3 MPa (approximately the pressure of tap water). It contains fine mist particles around 10 µm and relatively larger particles of about 250 µm, so it is not a dry mist. However, in outdoor settings where water saturation is not an issue, it provides cooling through latent heat with a large amount of fine mist, as well as cooling effects from the wetting effect. - In gardens and rooftop gardens: It sprays upwards, simultaneously achieving cooling and watering effects in the surrounding atmosphere, as well as visual effects. - On building rooftops: The fine mist and wetting effects cool the surrounding area of the rooftop, allowing for watering and cooling of the rooftop surface, which can reduce the air conditioning load of the building. - In sports fields, golf courses, tennis courts, and outdoor pools: A cool breeze containing droplets can be generated, providing effective measures against heat.

  • Sanitary fixtures
  • Water and sewerage pipe fittings
  • Pool equipment related

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Uniform Sector Nozzle "Uniform Distribution Nozzle VEP"

Uniform Sector Nozzle "Uniform Distribution Nozzle VEP"

Ceramic integrated nozzle! Sector nozzle with uniform flow distribution spray pattern.

The "Uniform Distribution Nozzle VEP" is a uniform fan-shaped nozzle that generates a fan spray with an even flow distribution across the entire spray pattern. The impact force per unit area is uniform. It is an integrated nozzle that uses ceramic in the spray tip. The Seltim is a ceramic-resin spray tip molded from a robust engineering plastic. It is ideal for use in industries such as steel, machinery, electrical and electronics, printing, food, and vehicles and transportation. 【Features】 ○ Generates a fan spray with uniform flow distribution ○ Spray pattern with uniform flow distribution across the entire area ○ Integrated nozzle that uses ceramic in the nozzle tip ○ Uniform impact force per unit area ○ Seltim is a ceramic-resin spray tip For more details, please contact us or download the catalog.

  • Aggregates and crushed stone
  • Water and sewerage pipe fittings
  • Roof and gutter construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV"

2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV"

Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 100μm or less.

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV" is a mist generation nozzle that can switch between two spray patterns: uniform and triangular distribution. It is a two-fluid fan-shaped nozzle that generates mist with an average particle diameter of less than 100μm. It is a liquid pressurization type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It can produce two patterns: a uniform flow distribution across the entire area and a triangular distribution that is strong in the center and gradually weakens towards the ends, offering a wide range of flow adjustment. 【Features】 ○ Switchable between uniform and triangular distribution, two spray patterns ○ Minimum spray flow in two fluids ○ Compact type ○ Structure resistant to clogging ○ Spray angles of 45°, 80°, and 110° For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV.S"

2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV.S"

Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less.

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV.S" is a space-saving, high-performance nozzle designed compactly from the BIM series of mist generation nozzles. It is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less. It is a suction type that does not require a liquid pressurization device, as it uses compressed air to draw up the liquid and spray it. The two-fluid nozzle consists of four parts: a nozzle tip, core, cap, and adapter, providing an even flow distribution across the entire area. 【Features】 ○ Two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less ○ Even spray pattern with uniform flow across the entire area ○ No device required for liquid pressurization ○ Compact type ○ Spray angle of 80° For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Uniform Sector Nozzle "Uniform Distribution Nozzle VE"

Uniform Sector Nozzle "Uniform Distribution Nozzle VE"

Replaceable nozzle! Sector-shaped nozzle that generates a uniform flow distribution in a fan-shaped spray.

The "Uniform Distribution Nozzle VE" is a uniform sector nozzle that generates a fan-shaped spray with an even flow distribution across the entire spray pattern. The impact force per unit area is uniform. It is a three-part nozzle that uses ceramic in the spray tip nozzle section. It consists of a spray tip, cap, and adapter, allowing for the replacement of only the worn spray tip. The strainer is standard equipment for small spray volume products and is removable. 【Features】 ○ Generates a fan-shaped spray with an even flow distribution ○ Spray pattern with uniform flow distribution across the entire area ○ Replaceable nozzle section when worn ○ Uniform impact force per unit area ○ Strainer is standard equipment for small spray volume products and is removable For more details, please contact us or download the catalog.

  • Aggregates and crushed stone
  • Water and sewerage pipe fittings
  • Roof and gutter construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rehiler company-made strainer

Rehiler company-made strainer

"Lechler" offers industrial standard strainers with a maximum pressure of 12 bar and basket strainers with 8 bar!

We offer industrial standard strainers for a maximum pressure of 1.2MPa and basket strainers for 0.8MPa. The industrial standard strainer is designed for operating pressures up to 1.2MPa, featuring a large screen area with color-coded mesh. It has an easy-to-handle, robust design with a slim body. The basket strainer is designed for high flow rates with low pressure loss. It is equipped with a flow deflector that collects debris at the bottom of the filter, preventing it from obstructing the screen insertion before the outlet. Debris can be easily removed from the bottom through an offset outlet. The strainer can accommodate two pressure gauges to control pressure loss during screen insertion and offers various screen insertion methods. For more details, please contact us or refer to the catalog. You can download the English version of the catalog. *Additionally, it is also used in agricultural drones!

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sonic Air Knife (Standard Type) by Sonic Corporation *For Blower Use Only

Sonic Air Knife (Standard Type) by Sonic Corporation *For Blower Use Only

Improved air knife of the conventional Tear Drop (tear-shaped) design! Enhanced blowing efficiency!!

■High-Speed XE Air Knife The Sonic Corporation's High-Speed XE Air Knife nozzle, further improved from the conventional Tear Drop shape, achieves excellent work efficiency. It efficiently laminarizes the air, resulting in minimal pressure loss and uniform blowing across the entire slot. A key feature is that there are no control plates inside the air knife, allowing for uniform blowing from end to end. Additionally, it effectively draws in the surrounding air to create a powerful blow. We offer a wide variety of options for the number, position, direction, and length of the nozzle's piping installation. We also provide the world's only rotary air knife.

  • Conveyor

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Equipment Held] Applicator <List of Applicators by Nichiei Sogyo Co., Ltd.>

[Equipment Held] Applicator <List of Applicators by Nichiei Sogyo Co., Ltd.>

Introducing our available equipment such as 17072-2, 171151-M2, and 171163-1!

We would like to introduce the applicators (Nichidan) that we have in our possession. We have a wide variety of applicators, including 17188-M2, 18042-2, and 171091-M2/171092-M2. Additionally, we also have 17691-M2 and 172093-M2. Please feel free to contact us if you need any assistance. 【Available Applicators (Excerpt)】 ■17072-2: 1 (Genuine 1 unit) ■17188-M2: 1 (Genuine 1 unit) ■17691-M2: 1 (Genuine 1 unit) ■17692-M2: 2 (Genuine 2 units) ■18042-2: 1 (Genuine 1 unit) ■171091-M2/171092-M2: 1 (Genuine 1 unit) *For more details, please refer to the PDF document or feel free to contact us.

  • Other services and technologies

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Raku Trainer Vertical Z-1 (MB)

Raku Trainer Vertical Z-1 (MB)

Industry-first compatibility up to 220Φ. Available in four colors: Black (B), Matte Black (MB), Gray (G), and Light Gray (LG).

The aluminum die-cast produced by mold casting is lightweight and robust. By applying chemical treatment for surface preparation before painting, corrosion resistance and adhesion are improved. The acrylic baked paint offers excellent weather resistance and corrosion resistance. The uniquely designed wave-shaped bottom provides outstanding drainage. The reinforced plate spring is made of weather-resistant and corrosion-resistant stainless steel SUS304. You can choose from four colors: Black (B), Matte Black (MB), Gray (G), and Light Gray (LG).

  • Waterproof tape, adhesive, drain, protective panel

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to nozzle

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.