Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 28, 2026～Feb 24, 2026
This ranking is based on the number of page views on our site.
91～120 item / All 354 items
A running charger that has advanced far beyond the conventional SBXE type.
The DC-DC converter "DC-2440SBXF" is a compact and lightweight on-board charger that has significantly advanced from the conventional SBXE type. It comes with a remote display unit that digitally shows voltage, current, and set voltage, improving visibility. For more details, please download the catalog.
It is a DC converter that efficiently converts a DC 24V system to DC 13.8V.
○ External control terminal: Remote control via engine key linkage or external contact switch ○ Ultra-low standby current: Approximately 80mA, making it very suitable for automotive use due to its minimal power consumption in standby mode. ○ High efficiency: Particularly necessary for valuable batteries, achieving approximately 90% efficiency in power conversion. ○ Dual output: Equipped with multiple terminals for a maximum of 40A and 15A. (However, the total current must be used below 40A) ○ Overload electronic protection: Automatically cuts off output when overloaded. (To reset, the power switch must be turned off and on again) ○ Low noise: Significantly lower noise than conventional switching converters, allowing use similar to regular power supplies without worrying about noise. ○ Automatic cooling fan: The fan starts when the case temperature exceeds a certain level and automatically stops when the temperature falls below a certain level. ○ Slim design: Despite high current capacity, it is compact and particularly slim. ○ Selected components: Uses high-performance components such as metal film resistors and glass-epoxy boards, specifically selected for industrial use.
This is a DC converter that efficiently converts 12V DC to 27.8V DC.
- Ultra-low standby current: Approximately 150mA, with very low power consumption in standby mode, making it suitable for automotive use. - High efficiency: Especially important for valuable batteries, it achieves approximately 90% efficiency in converting electricity. - Overload electronic protection: Automatically cuts off output when overloaded. (To reset, the power switch must be turned off and on again.) - Low noise: Significantly lower noise compared to conventional switching converters, allowing for use similar to standard power supplies without worrying about noise. - Slim design: Despite handling high current, it is compact and particularly thin. - Selected components: Uses high-performance components such as metal film resistors and glass-epoxy substrates, specifically selected for industrial use.
It is a DC converter that efficiently converts a DC 48V system to DC 13.8V.
- External control terminal: Remote control via engine key linkage or external contact switch. - High efficiency: It is particularly necessary to convert electricity efficiently in the case of valuable batteries, achieving approximately 90% efficiency. - Dual output: Equipped with multiple terminals for maximum 40A and 1A. (However, the total current must be used below 40A.) - Overload electronic protection: Automatically cuts off output when overloaded. (To reset, the power switch must be turned off and on again.) - Low noise: Significantly lower noise than conventional switching converters, allowing use without worrying about noise, similar to a regular power supply. - Automatic cooling fan: The fan starts when the case temperature exceeds a certain level and automatically stops when it falls below a certain temperature. - Slim design: Despite high current, it is compact and particularly slim. - Selected components: Uses high-performance components such as metal film resistors and glass-epoxy boards, specifically selected for industrial use.
World's smallest lightweight up/down/cross SDI converter【M_UD】
The 【M_UD】 is an ultra-compact and lightweight micro converter designed with dimensions of 68mm x 59.2mm x 20mm and a weight of 95g, supporting up-conversion, down-conversion, and cross-conversion. It can up-convert input SDI signals from standard definition SD-SDI to high definition HD-SDI, down-convert from HD-SDI to SD-SDI, and perform cross-conversion between HD-SDI signals (such as converting 720p to 1080i). The conversion settings can be selected via the dip switches on the unit from [SD (standard definition)/720p/1080i/1080p], and the output video aspect ratio can be set to "Full/14:9/Pillar (Letter)/Cut." The input voltage supports a wide range from DC 5 to 24V, allowing power supply from various devices via the included AC adapter or USB. Its ultra-compact and lightweight design makes it highly portable, suitable for use in filming and on-site applications.
![Analog to SDI Converter [1000AH]](https://image.www.ipros.com/public/product/image/cf3/2000163543/IPROS9104767761622783071.jpg?w=280&h=280)
Analog to SDI converter with up-conversion function
The 【1000AH】 is a mini converter that converts analog signals (composite/component) into SDI signals. Even if your shooting equipment or playback device only supports analog video output, you can use the 【1000AH】 to convert it into an SDI signal that can be transmitted over long distances. It can be connected to professional monitors, switchers, projectors, and other devices equipped with SDI input terminals. Additionally, it features an up-conversion function that converts the input analog signal to 480i/720p/1080i/1080p. By combining the functions of an analog-to-SDI conversion converter and an up-converter into one device, convenience is enhanced. Furthermore, it is equipped with two SDI output channels and one HDMI output channel for simultaneous output, allowing for connection to multiple devices such as monitoring screens. The input voltage supports a wide range of DC 7 to 24V. In addition to the included AC adapter, it can also be powered by various other devices.
The DC connector is a screw-type that prevents disconnection! It excels in portability and versatility, making it usable in various 4K environments.
This product is a 4K-compatible video and audio signal converter that converts HDMI 2.0 to 12G-SDI, compliant with SMPTE ST2082 for long-distance transmission over a single coaxial cable, and to Quad 3G-SDI for transmitting UHD signals over four coaxial cables. It features one HDMI 2.0 input terminal, two 12G-SDI output terminals, and four 3G-SDI output terminals. It is capable of converting 4K signals input via HDMI 2.0 into both 12G-SDI and Quad 3G-SDI. Additionally, it supports simultaneous output to two 12G-SDI and Quad 3G-SDI, distributing the 4K signal to a total of three outputs. 【Features】 ■ HDMI 2.0 → 12G-SDI/Quad 3G-SDI conversion ■ Simultaneous output to two 12G-SDI and Quad 3G-SDI ■ Anti-pull DC connector adopted *For more details, please refer to the PDF document or feel free to contact us.
Low power consumption and low heat generation, providing stable signal output! Can be used in various settings.
At AD Techno Co., Ltd., we handle various converters manufactured by AVMATRIX. The "Mini Converter Series" includes the 3G-SDI to HDMI mini converter and the HDMI to 3G-SDI mini converter. With an optimized internal circuit board design, it achieves a low power consumption of up to 2W while being capable of continuous operation for 24 hours, making it a reliable choice as a broadcast-quality converter. In addition, we also offer the "3G-SDI/HDMI Scaling Cross Converter" and the "Scaling Converter Series." 【Mini Converter Series Features】 <MINI_SC 1112> ■ SDI input / HDMI output ■ Supports 3G/HD/SD SDI multi-format ■ Equipped with 1 SDI loop output ■ Pocket-sized with a dedicated mount bracket included ■ Compatible with 3G-SDI Level A/B input *For more details, please refer to the PDF materials or feel free to contact us.
We will also introduce our lineup of DC-DC converters for electric vehicles and examples of product applications!
Electric vehicles are equipped with onboard electrical components such as high-voltage batteries, inverters, and motors, and due to space constraints, component mounting has become increasingly dense with each generation. Our DC/DC converters are required to be further miniaturized and lightweight while increasing power capacity. To meet this demand, low-loss designs using soft-switching circuits and high heat dissipation and thermal distribution technologies have been adopted. Additionally, full digital control using DSP enables optimal power management and safety design, as well as communication with higher-level ECUs. This catalog introduces part of the DCDC converter lineup from Shinryo Electric Industry! We have also compiled system proposals for auxiliary power supply for electric vehicles, so please take a look. With the evolution of car electronics leading to increased auxiliary power and advancements in autonomous driving technology, there is a growing demand for high-output DC/DC converters. By using DC/DC converters capable of parallel operation, we can meet the needs for increased auxiliary power. <Currently under development!> We are also advancing the development of high-voltage input products (800V input) tailored to the needs for low voltage input and rapid charging. Please feel free to contact us.
Individually controllable 8 contact outputs! Remote control and monitoring of contact I/O via network.
The "POSE SE10-8A7B1" is a contact converter that performs monitoring and control of network-compatible input/output contacts. It allows for flexible monitoring and control of remote contacts via a browser or email. Using an inline frame in the user HTML area, it is possible to incorporate images from surveillance cameras or control buttons into the surveillance camera footage. 【Features】 ■ Remote contact control and monitoring via network ■ Supports inline frames (iframe) ■ Can send emails to up to 8 locations to notify of abnormal occurrences or changes in power status ■ Annual schedule settings available *For more details, please refer to the PDF document or feel free to contact us.
With two contact inputs, you can freely control the "buzzer sound" and "power"! It's easy and simple to control the power using the contacts.
The "BEADS SE10-B1" is a contact converter that controls an AC100V power supply and a buzzer based on two contact input states. By switching modes when the contacts are ON:ON, ON:OFF, or OFF:OFF, various combinations can be selected to determine the ON and OFF patterns for the power supply and buzzer. It allows for easy and straightforward control of the power supply using contacts, making it suitable for immediate use in security systems, AV systems, and measurement systems. 【Features】 ■ Independent of the network ■ Controls AC100V power supply and buzzer sound based on two contact input states ■ Enables control of power output and buzzer through combinations of sensors and switches or contact outputs from IP cameras and sensors ■ Allows for easy and straightforward control of the power supply using contacts *For more details, please refer to the PDF document or feel free to contact us.
Efficiently guides the moisture from the substrate to the de-aeration device, preventing blisters in the waterproof layer.
The Origintex 802 method involves laying a ventilation sheet between the Origintex and the substrate, efficiently guiding moisture from the substrate to the dehumidification device, and preventing blisters in the waterproof layer. It prevents the waterproof layer from breaking due to movement or cracks in the substrate. Additionally, there are no unpleasant odors during the construction period, ensuring that residents are not disturbed. For more details, please download the catalog.
This is intended to apply a non-use agent epoxy resin to maintain the water quality of stored water.
Origin EP Coat is designed to apply a non-solvent epoxy resin for waterproofing and corrosion protection of concrete water tanks in water supply facilities, as well as to maintain the water quality of stored water. For Origin EP Coat B, please take the epoxy base material and hardener in a container, lightly stir them, then add the powder and mix thoroughly using a hand mixer or similar tool. For more details, please download the catalog.
It consists of a symbol board (magnet) and a reed switch, and is an analog/digital converter that converts information about the position (angle) of the rotating shaft into a digital quantity.
The rotation amount (angle) is output directly as a BCD signal. The output value can be read in decimal from the main window. No power supply is required. You can choose between 3-digit and 4-digit types.
Significantly suppresses power supply harmonics! High-efficiency converter capable of continuous regenerative operation.
The "VF66R" is a high power factor converter that significantly suppresses inverter power supply harmonics and can reduce the total current distortion rate to below 5%. It allows for continuous regenerative operation and can instantly respond to steep load fluctuations, greatly enhancing the braking capability of the system. Additionally, it supports the connection of multiple inverters (common converter method), enabling effective utilization of regenerative energy, eliminating the need for braking devices, and allowing for space-saving in the system. 【Features】 ■Significantly suppresses power supply harmonics ■100% continuous power regeneration operation is possible ■Energy-saving and space-saving ■Compatible with open network communication ■Equipped with 120-degree conduction mode *For more details, please refer to the PDF document or feel free to contact us.
Extend your standard analog phone with a fiber cable!
● Connects analog telephone voice signals to traditional telephone devices using fiber cables ● Supports FXS (connection to PBX) and FXO (connection to telephone devices) ● Includes audio transfer, caller ID, and automatic ring down ● Available in multi-mode or single-mode specifications ● Supports loop start (hotline) ● Can extend telephone lines independently up to approximately 20 km
The attractive price is easy to use whether in standalone or modular form.
Pure Networking Media Converter 10/100BASE-TX←→100BASE-FX SM1310nm SC 20km *Discontinued. The successor model is the LHC211A series.* ● Provides Layer 1 media conversion at an affordable price ● Converts 10/100 RJ-45 to 100 optical, or 1000 fixed RJ-45 to 10000 optical ● Can be used in pairs to extend up to 15km ● Transparent to data ● Simple plug-and-play installation ● Diagnostic LED lamps helpful for fault analysis ● Link-fault passthrough alerts to the optical fiber side for "silent failure" ● UTP port automatically detects and adjusts speed, full duplex/half duplex, MDI/MDI-X ● SFP model supports up to 1250Mbps ● Available as a standalone unit or in a 2U size 14-slot chassis (LHC200ARACK) ● Chassis supports power redundancy ● Hot-swappable
The attractive price is easy to use whether in standalone or clustered form.
Pure Networking Media Converter 1000BASE-TX←→1000BASE-FX SFP *Discontinued. The successor model is the LGC211A series.* ● Provides Layer 1 media conversion at an affordable price ● Converts 10/100 RJ-45 to 100 optical, or 1000 fixed RJ-45 to 10000 optical ● Can be used in pairs to extend up to 15 km ● Transparent to data ● Simple plug-and-play installation ● Diagnostic LED lamps useful for fault analysis ● Link-fault passthrough alerts to the optical fiber side for "silent failure." ● UTP port automatically detects and adjusts speed, full duplex/half duplex, MDI/MDI-X ● SFP model supports up to 1250 Mbps ● Available as a standalone unit or in a 2U size 14-slot chassis (LHC200ARACK) ● Chassis supports power redundancy ● Hot-swappable
Even PCs without DVI or HDMI connectors can display by converting USB.
● Video streaming is possible at a maximum of 1080p ● Monitors, LCDs, and projectors can be connected via USB 3.0 port with hot-plugging "without restarting" ● Supports extended mode and mirror mode ● Can resume from hibernation or suspend mode ● Up to 6 adapters can be connected
Designed and verified to comply with factory environment EMC standards and to withstand extreme temperatures.
● Operates at a voltage of 10-30VDC and a temperature range of -40 to +80ºC. ● Designed to protect expensive control equipment. ● 3-way isolation, 1000V input/output. ● 2kV isolation with ESD protection features. ● ULR certification. ● Contact discharge of 8kV, air discharge of 15kV. ● Configurable ON/OFF for bias application and termination resistance. ● Converts unbalanced half-duplex/full-duplex RS-232 signals to balanced full-duplex RS-422 or 2-wire half-duplex or 4-wire full-duplex RS-485. ● Rugged metal case rated IP30. ● Supports a wide range of data rates. ● Comes with a fixed bracket for panel mounting. ● Easily mountable on DIN rail (DR100) with optional clips.
Convert optical fiber to copper wire and transmit 30W power and data to a remote PoE+ device.
● One 10/100/1000Mbps copper port and one 1000BASE-X SFP port for single-mode and multi-mode fiber connections ● Add PoE+ devices such as PTZ cameras, access points, and IP phones to the network ● Operates as a Power Sourcing Equipment (PSE) on the copper side, supplying 30W of power ● Smart plug-and-play installation. No reconfiguration is needed to add new devices to the network ● The copper port supports full duplex, automatic MDI/MDI-X, and auto-negotiation ● Immediately notifies of link issues on the fiber side with link loss forwarding ● Compatible with 802.3 af/at compliant PoE devices
With a wealth of implementation experience, reliably extend your network! Media Converter Series.
The "LHC211A / LGC211A Series" is a media converter that can extend communication distances by several tens of kilometers at an affordable price. By utilizing an optional chassis, it can supply power to up to 14 media converters and simplify communication connections. It meets various network extension needs, from commercial facilities like supermarkets to large-scale industrial facilities. 【Features】 ■ Seamless switching from LAN to fiber optic ■ Abundant SFP options ■ Rack mount chassis support ■ Redundant power supply *For more details, please refer to the PDF document or feel free to contact us.
White paper available! Achieve speed improvements and extended communication distances with low-cost fiber optics.
We propose a method to introduce a fiber optic network at low cost while utilizing existing equipment such as LAN cables through the use of media converters. ★We are currently offering a white paper that introduces this method★ You can view it immediately by clicking the "Download" button below. Black Box offers the "Media Converter" LHC211A / LGC211A series, which boasts a proven track record in a wide range of fields including telecommunications, energy, oil and gas, and military applications.
USB Camera/Microphone to HDMI Converter Convert USB Camera/Microphone to HDMI!!
■Convert USB Camera/Microphone to HDMI!! Convert video from USB camera and audio from USB microphone to HDMI Scale up to 4Kp30 and output via HDMI (resolution settings available) USB2.0 output also supported (video only) Controllable via USB/LAN (Web GUI) Controllable via RS232/REST API (commands) Compatible with Windows 7 and later/macOS 10.10 and later (UVC compatible) Video input features Up to 1080p60 (YUYV, USB3.0) Up to 1080p30 (I420/YV12/NV12/MJPEG, USB3.0/2.0) Up to 1080p10 (YUYV, USB2.0) Video output features HDMI1.4 up to 4K30 (video/audio) USB2.0 720p30 MJPEG UVC (video only)
Introducing the SFP-compatible serial to Ethernet converter "DN9840E"!
The "DN9840E" is a converter that supports SFP and converts RS232c/RS422/RS485 serial signals into Ethernet frames. By using the conversion between serial signals and Ethernet frames, or between serial signals and Ethernet frames, you can control serial signals from a PC. Additionally, it allows for SNMP monitoring of both the media converter and this device, and when combined with a contact adapter, parallel (contact) transmission is possible. 【Features】 ■ Converts RS232c/RS422/RS485 serial signals into Ethernet frames ■ Supports SFP ■ Allows for SNMP monitoring of the media converter and this device ■ Enables parallel (contact) transmission when combined with a contact adapter *For more details, please refer to the PDF document or feel free to contact us.
Introducing a 100G media converter with remote monitoring capabilities that supports up to 8 lines of multiplex transmission!
The "DN100GE Series" is a media converter specifically designed for 100G applications. It enables high-speed transmission at 100Gbps and can improve allowable loss by up to approximately 20dB through the use of booster amplifiers, allowing for long-distance transmission. Additionally, it features the ability to change the emission wavelength of our optical module (CFP2-ACO) to any desired wavelength from the management unit mounted on our media converter chassis (DNSHD8E Series), enabling multiplex transmission of up to 8 lines. 【Features】 - Capable of high-speed transmission at 100Gbps - Long-distance transmission possible with amplifiers - Remote monitoring function to check operational and power status - Capable of multiplex transmission of up to 8 lines - Remote monitoring of link status - Can accommodate up to 4 units in a 19-inch rack 1U size *For more details, please refer to the PDF document or feel free to contact us. We are currently developing a new product for the 100G media converter. For more information, please feel free to contact us.
High-performance multi-protocol type. Up to 8 external ports can be connected.
The multi-protocol converter "SC-8257 UST" is a multi-protocol converter that condenses Seiko Precision's over 30 years of accumulated interface technology and extensive connection experience. It enhances reliability during system operation through network monitoring, the addition of security features, and integration with time servers. UST provides seamless external connections that do not make you aware of complex data exchanges with legacy information assets, responding flexibly in a one-stop manner. For more details, please download the catalog.
One unit can perform both step-up and step-down in both directions! High efficiency of over 94%!
【Features】 ● High safety and advantageous for noise countermeasures with input/output isolation type ● High step-up/down of 320V/48V with bidirectional 2.5kW ● Achieves over 94% high efficiency in bidirectional conversion through optimization by digital control ● Capable of autonomous operation that automatically switches conversion direction to maintain constant input/output voltage ● Fast switching of conversion direction possible without stopping the converter ● Serial communication (RS485) enables current, voltage, conversion direction control, and status monitoring ● Capable of parallel operation ● Space-saving 1U full rack
