Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
961～975 item / All 1214 items
This is an AC/DC withstand voltage/insulation testing machine that is safe and accurate, based on various global safety standards.
*Please select one type according to the test item. GTP-9801 (AC Voltage Withstand Tester) GTP-9802 (AC/DC Voltage Withstand Tester) GTP-9803 (AC/DC Voltage Withstand/Insulation Tester) *If you need a calibration certificate, please contact us.
It is made based on JIS A 1221 and is applicable to all soil layers excluding gravel as an auxiliary method for standard penetration tests.
- A load of 100 kg is applied to a rod with a screw point, and the number of rotations (half turns) per penetration amount is determined. It is said to have a good correlation with standard penetration tests. - The test results are also available in a data sheet, and the condition of the soil can be clearly displayed through test tables and diagrams. There is an increasing trend of its use in soil location surveys.
The S-213 soil penetration testing device is a compact and lightweight penetration testing machine developed by the Civil Engineering Research Institute for slope investigation.
- The rod has a diameter of φ25mm, the cone has a diameter of φ30mm, and the weight is 5kg, with a tripod equipped with wire and pulley included. - Based on the relationship between the number of blows of the heavy cone and the penetration amount, it can measure the relative bearing capacity strength of the road subgrade and subbase, and it is applicable for purposes similar to CBR tests and plate load tests.
The OJ-type field CBR testing device S-180 is a simplified OJ-type field CBR testing machine that uses an oil jack equipped with a Bourdon tube pressure gauge.
The hydraulic jack uses a Bourdon tube pressure gauge with a capacity of tons and a minimum scale of 100 kg.
A recording hydraulic test device that docks a test pump and a recording meter. It is ideal for reliable completion inspections. Prepare recording paper for 15 minutes.
The TR-15HC integrates a pressurization pump and a recording device, proving complete construction through recording paper.
This is a simple dynamic cone penetration testing device. It is used to easily determine the penetration resistance of soil. It comes with a carrying bag for convenient transport.
It comes with a carrying bag for convenient transport. The standard accessories include rods (500mm x 9 pieces) plus a tip rod, totaling approximately 5 meters, and it is possible to extend this further by purchasing additional rods. - About maximum depth When conducting surveys with standard accessories, the total length is approximately 5 meters, which includes the rods (500mm x 9 pieces) plus the tip rod. You can purchase additional rods to extend it further. - About calculating the N value It is possible to calculate the N value. For details, please refer to the Geotechnical Engineering Society standard JGS 1433. - About attaching and detaching the rods They can be easily removed using the included wrench.
A generator load tester that automatically performs everything from a simple generator power factor load device to data acquisition.
Generator Load Testing Machine **Features** 1. Adoption of digital display for voltage and current readings with phase display functionality 2. Display of rotational speed, rotation direction, and frequency Others Service outlet
A pressure-type seal strength testing machine widely used in the pharmaceutical, cosmetics, and food industries. It is a device for testing the seal strength of pouch and tube products.
* For more details, please visit our website → http://www.jp-factory.co.jp/eng/ * Contact: Morioka from the Machinery Division 【Mobile: 080-3108-5647】 - This is a minor change model of the old JY-1507 type. - Measurement starts with a one-push operation. - Compact, lightweight, and space-saving tabletop model. - Measurement range is 1 to 150 Kg. - Alarm sounds with a buzzer in case of seal failure. - Pressure and timer during seal failure are held for display. - Power supply: AC100V - Air source: 0.2 to 0.7 MPa - Calibration services are also available, including for the old JY-1507 type.
This is a test device for controlling the pressure and temperature inside a 2" pipe.
The "Water Pressure and Temperature Testing Device" is a testing apparatus that controls the pressure and temperature inside a 2" pipe. It is ideal for temperature and pressure characteristic testing. 【Features】 ○ Allows for the installation of test samples inside the pipe and extraction of electrical signals ○ Suitable for pressure and temperature characteristic testing of fiber products For more details, please contact us or download the catalog.
This is a pressure testing device capable of conducting pressure tests up to 70 MPa.
The "Pressure Gauge Calibration Device" is a pressure testing device capable of conducting pressure tests up to 70 MPa. SATACO engages in business activities with a strong emphasis on safety, the environment, and energy conservation. We provide the best proposals through development, design, manufacturing, and maintenance focused on water, air, and heat. Our goal is not only to be of service to our customers but also to grow and prosper together with them. 【Features】 ○ Built-in booster type capable of pressurizing up to 70 MPa ○ Suitable for high-pressure gas manufacturing equipment testing ○ Equipped with a safety cover for secure operation ○ Capable of handling oil-free, water-free, and contamination issues For more details, please contact us or download the catalog.
Pencil hardness test to evaluate the hardness of the coating film. It is a high-performance, cost-effective model.
It is used to measure the hardness of coatings. It is designed to apply a load of 750g ±10g at the tip of the pencil. The angle of the pencil is fixed at 45° ±1°, and there is a level on the top of the testing device. By using this equipment, reproducible tests can be conducted, allowing for the same evaluation regardless of who performs the test. The main body is made of steel and is powder-coated, with a product specification that ensures the load accuracy is within 750g ±5g. It is a high-precision model with high cost performance. It is also effective for applications beyond painting. It is used for evaluating the hardness of hard coatings on films, assessing the surface hardness of liquid crystal displays (LCDs), and evaluating the hardness of plastic products, making it a standard for hardness evaluation. The lineup includes three types with loads of 750g, 1000g, and 500g, each corresponding to JIS-K5600-5-4, JIS-K5400, and industry-specific standards (500g), respectively.
Supports various coating evaluations with one device! Automation enables stable and accurate evaluation tests.
The "Automatic Coating Film Evaluation Tester" is a device that can perform cross-cut tests, scratch hardness tests (pencil method/weighted needle method), and abrasion tests fully automatically. It can be used simply by setting the test piece and operating it via a liquid crystal touch panel, eliminating unstable factors associated with manual work and enabling accurate test results. With a protective cover, cross-cut tests can also be conducted safely. 【Features】 ■ Tests can be conducted at accurate speeds, loads, and directions ■ Tests can be performed on coatings from metal substrates to coatings on PET films ■ Main body size is W550×D410×H520mm ■ Supports detailed condition settings *For more details, please refer to the PDF materials or feel free to contact us. The basic information section also introduces "Adhesion Testers" and "Applicators."
No human errors occur! A more efficient pendulum hardness test can be conducted.
The "Pendulum Hardness Tester" is a testing machine used to evaluate the hardness of coating surfaces. The evaluation of surface hardness is conducted based on the number of swings and the duration of swinging. It is equipped with an automatic lifting protective cover that completely encloses the device, preventing even slight winds that could affect the pendulum test, thus maintaining the stability of the pendulum. Additionally, it features a built-in sensor that accurately measures the level, and it allows for the monitoring of temperature and humidity during testing. 【Features】 ■ No human error occurs ■ Provides a stable testing environment ■ Equipped with an automatic lifting protective cover that completely encloses the device ■ Prevents even slight winds that could affect the pendulum test ■ Maintains the stability of the pendulum *For more details, please refer to the related link page or feel free to contact us.
Reduce testing costs! No reaction force required, easy operation, and real-time evaluation of ground bearing capacity characteristics! (NETIS registered product)
The "Simple Support Strength Measuring Device Caspol" is a tripod-type measuring instrument that can evaluate the support strength characteristics of the ground in real-time. It features simple and easy operation, minimizes individual errors, and does not require reaction force, making it applicable in narrow spaces and mountainous areas. The measurement principle involves dropping a rammer equipped with an accelerometer onto the ground and calculating the strength constants necessary for the foundation support strength of structures from the maximum impact acceleration obtained from the collision. This single device can measure K30, qc, CBR, c, and φ (converted values from impact acceleration). 【Features】 ● No reaction force is required for loading, allowing for low-cost measurement of various parameters. ● Usable in sites where heavy machinery cannot enter, improving construction management quality. ● Measurement is quick and does not take much time. ● Compact and lightweight, easy to operate, and suitable for any tester. ● Powered by batteries, enabling field measurements without worrying about power supply. ● NETIS registered product: NO.KK-980055-V ● Can calculate the "allowable support strength of the ground" using measurement constants. (→ The calculation method is explained on the Marui website: http://www.marui-group.co.jp/support/caspfol.html)
A two-layer structure of the test chamber and water tank with low heat and power loss.
This is a "Gas Phase Freezing and Water Melting (Method B)" testing machine for building materials such as slate, siding, gypsum board, and paint. By stacking the test chamber and water tank vertically, it features an energy-saving design that reduces thermal loss during the "melting phase" of the constant temperature water circulation and the pump power required for water circulation. Additionally, the water tank lid opens from the top for easy maintenance and also serves as a step stool, making it practical. Other considerations for maintenance include an external fan motor for cold air circulation. 【Features】 ● During "Water Melting": Unique upper and lower dual-chamber structure allows constant temperature water to circulate just below the test chamber, eliminating thermal loss. ● During "Gas Phase Freezing": Warm water naturally falls back from the test chamber to the water tank, reducing energy consumption for circulation. ● Easy operation with a touch panel. ● Peace of mind with a self-diagnosis function in case of trouble. ● User-friendly design that considers maintenance. ● Direct circulation structure achieves stable temperature distribution.
