オールグッド Company Profile

The "Small Automatic Film Applicator" is a new type of coating machine (desktop automatic coater) that miniaturizes the "100 Series" and enhances its functionality. The coating distance is up to A4 size. The coating speed ranges from 1 to 200 mm/s, allowing for a wide range of speed adjustments from low to high. We offer a lineup including the glass plate "101-1," the vacuum chuck plate "101-2," and the dual-use type for both glass plate and vacuum chuck "101-3." 【Features】 ■ Coating distance is up to A4 size ■ Wide range of speed adjustments from low to high ■ Load adjustment using weights is possible (up to 2000 gm) ■ The clamp section that holds the test piece can be finely adjusted to match the thickness of the test piece ■ Compatible with thin test pieces like films and thick test pieces like glass plates when used with a vacuum chuck plate ■ Stable coating can be performed regardless of the material of the test piece

The "100 Series" is an automatic film applicator (desktop automatic coater). It can be operated via a touch panel, and the sample size can be freely set up to "A3 size." Additionally, the coating speed can be adjusted in increments of 1 mm per second. We offer a lineup including the glass plate "100-1," the vacuum chuck plate "100-3," and the heated vacuum chuck plate "100-5." 【Features】 ■ All operations can be performed on the touch panel screen ■ Coating speed and coating distance can be freely set ■ Achieves a coating range of approximately A3 size ■ Contributes significantly to reducing curing time and stabilizing the coating film by adding heating during coating ■ Up to 6 original settings tailored to test pieces or samples can be memorized, allowing for immediate coating under the same conditions upon powering on.

The "Coating Drying Time Measurement Device" is a product used to measure the time it takes for paint to transition from a wet film to a dry film. A measuring needle is set on top of the paint applied at a constant film thickness, and the needle moves a distance of 300mm according to the set time. During this time, the paint gradually dries, causing changes in the state of the coating after the needle has moved. At the point where the state of the coating changes, the time scale on the left side of the main unit is read to confirm the time for each stage. The point at which the needle no longer leaves a mark indicates that the coating is completely dry. 【Features】 ■ Measures the time it takes for paint to transition from a wet film to a dry film ■ Can measure up to 10 lanes simultaneously ■ Allows for different time settings on 5 tracks (2 lanes per track) ■ Standard set times: 6 hours, 12 hours, 24 hours, 48 hours ■ One track out of the 5 can be customized for time settings ■ The main unit is operated via a liquid crystal touch panel