Last Updated： Aggregation Period:Mar 11, 2026～Apr 07, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 11, 2026～Apr 07, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 11, 2026～Apr 07, 2026
This ranking is based on the number of page views on our site.
1081～1110 item / All 1587 items
It is a multi-environment measuring instrument that can be used as either an integrated or separate type with the probe and main unit.
It can be widely used for building air conditioning, clean room management, and indoor environment measurement. *The VSM-20 main unit alone cannot perform measurements. Customers without the main unit should purchase the probe as a set with the main unit.
This is a digital thermometer and hygrometer with an excellent cable winding function for ease of use.
With the telescopic sensor probe, high-altitude measurements can be taken immediately.
Due to the thermal method, a slight wind speed can be measured. An expandable joint can be connected as an option.
Due to the thermal method, a slight wind speed can be measured. *Please note that this product requires adjustment in combination with the main unit when replacing the sensor (considered a repair). An additional adjustment fee will be required on top of the price for the sensor probe alone.
Detects metals mixed in food (seafood, wild vegetables, vegetables), etc.
The detection unit has a two-range switchable wide and spot mode.
This is a slope level that is ideal for managing horizontal and vertical angles, displaying them digitally just by placing it.
Simply place it to easily display the angle digitally. It is an ideal inclinometer for managing horizontal and vertical angles. With an R-cut design, it offers excellent stability even on pipes! It allows for easy management of piping slopes.
We will measure the 'straight-line distance,' 'vertical distance,' 'horizontal distance,' 'inclination angle,' and 'height of the target object.'
With the tilt sensor, various measurements such as horizontal and vertical distances are automatically calculated. The most notable feature is the "height measurement of the target object." For example, buildings with a narrow top shape like Tokyo Tower. As long as you can measure the straight-line distance to any point on the target object where you want to know the height, that's enough. After that, simply press the button to indicate the top and bottom points with the TruePulse, and the tilt sensor will automatically calculate the height. The height of the target object will be clearly displayed in your line of sight.
It has an IP56 rating for waterproof and dustproof performance, making it safe to use outdoors.
It is compatible with Bluetooth. With simple button operations, it can instantly perform 11 types of distance, height, and angle measurements. All measurement values are displayed in the line of sight of the target, allowing for 3D distance measurements to be easily achieved by one person without any difficulty.
This is a speed gun capable of measuring speeds up to 322 km/h, suitable for measuring the speed of sports and vehicles.
Speedster V is a speed gun equipped with the latest speed conversion processor, capable of measuring the speed of various moving objects, from baseballs and tennis balls to construction site trucks and racing cars, with just one touch. It can measure speeds of up to 322 km/h.
You can easily measure distance while walking. It is dustproof and waterproof with an IP54 rating.
The LCD screen, equipped with a backlight function, displays the measurement values, making it easy to check the numbers at hand.
This is a portable oxygen concentration indicator alarm featuring a wide and easy-to-read digital display.
To prevent conditions such as oxygen deficiency. It has received high praise for features such as "robustness" and "large alarm lights." Its energy-saving design and large, easy-to-read digital display are effective in preventing oxygen deficiency in the workplace.
This is an automatic gas sampling device that achieves suction power with a stable intrinsic safety explosion-proof structure, even under high load.
At Gastec, in response to feedback from measurement sites, we have developed detection tubes for work environments that take into account the effort of the measurers and the measurement routine, using an electric suction pump. Additionally, since detection tubes generally have a high filling density, they cannot be suctioned with conventional electric suction pumps; therefore, we developed a compact electric suction pump with high suction power that can also suction detection tubes, while also pursuing explosion-proof performance. Please utilize Gastec's unique new detection tube measurement system for work environment measurements based on work environment measurement standards.
It is an automatic gas sampling device for harmful air pollutants measurement methods manual, such as ethylene oxide.
At Gastec, in response to feedback from measurement sites, we have developed detection tubes for working environments that take into account the effort of the measurer and measurement routines, using an electric suction pump. Additionally, since detection tubes generally have a high filling density, they cannot be suctioned with conventional electric suction pumps; therefore, we developed a compact electric suction pump with a high suction power that can also suction detection tubes, while also pursuing explosion-proof performance. Please utilize Gastec's unique new detection tube measurement system for measuring working environments based on working environment measurement standards.
The H2S continuous monitoring device is an easy, convenient, and reliable diffusion-type hydrogen sulfide measuring instrument.
The generation of hydrogen sulfide in sewer facilities causes significant damage to each facility due to the corrosion of sewer pipes and unpleasant odors. Please utilize the diffusion-type hydrogen sulfide monitor GHS-8AT for unmanned, continuous monitoring of hydrogen sulfide concentration in sewer facilities, as well as for corrosion and odor control measures.
This is an affordable measurement set ideal for the routine management of total nitrogen and total phosphorus.
Nitrogen and phosphorus are considered one of the indicators of eutrophication in closed water bodies such as bays (marine) and lakes, according to the enforcement order of the Water Pollution Prevention Act. They are measured particularly to maintain environmental standards or discharge standards. A pHotoFlex type portable multiparameter water quality meter is set up with the reactor. Decomposing agents for N and P, along with dedicated reagents, are included.
Leave NC composite lathe processing to us!!
We measure the surface roughness of the adsorption surface, which is essential for the sealing area of solenoid valves, electric valves, and valve components, as well as the outer diameter taper surface roughness of needle shapes and the inner diameter surface roughness of sliding parts within a specified time, striving to maintain stable quality. [We have over 50 years of experience in the processing of solenoid valves and valve components] - With precision cutting as our core technology, we have a wealth of production experience in components for the sealing areas of solenoid valves and valve parts, needles, plungers, movable cores, and fixed cores. In addition to cutting processing, we are capable of integrated production up to semi-assembly, including press-fitting, riveting, silver brazing using high frequency, and argon welding. We can manage fitting dimensions and consolidate processes. Our work spans a wide range, including automotive, consumer electronics, sensor components, and medical devices. Please feel free to contact us.
Leave NC composite lathe processing to us!!
We utilize it for measuring the angles of outer and inner diameters, measuring the dimensions of bag hole shapes, and measuring dimensions based on imaginary point references. We regularly measure dimensions and strive to maintain stable quality management. 【We have over 50 years of experience in the processing of solenoid valves and valve components】 - Our core technology is precision cutting, and we have a wealth of production experience in components such as seat parts for solenoid valves and valve components, needles, plungers, movable iron cores, and fixed iron cores. In addition to cutting processing, we can also achieve integrated production up to semi-assembly, including press-fitting, riveting, silver brazing using high frequency, and argon welding. We can manage fitting dimensions and consolidate processes. Our work spans a wide range of fields, including automotive, low-voltage and home appliance parts, sensor components, and medical devices. Please feel free to contact us.
Switching from mercury lamps is not just about LED! The ballast and fixture are integrated in design! Ideal for flood lighting in parking lots (security lights) and pools!
The "SK-150S" is an outdoor non-glare lighting fixture that uses reinforced glass, offering good light transmission. The "electrode-less lamp," which is gaining attention as a third option to replace mercury lamps with LEDs, has a completely different light emission principle than traditional bulbs, as it does not have a filament structure and lacks electrodes, resulting in a longer lifespan and gentle brightness. The power box is made of cast aluminum, with a surface that is electrostatically painted for corrosion resistance, durability, and longevity. The reflector is vacuum-coated, providing excellent reflective performance. It is used in conjunction with a 150W circular lamp, excelling in lifespan, color rendering, and illumination range. 【Features】 - Power box made of cast aluminum, with an electrostatically painted surface for corrosion resistance, durability, and longevity. - The fixture umbrella uses high-purity aluminum material and has an attractive design. - The reflector is vacuum-coated, providing excellent reflective performance. - Reinforced glass is used, offering good light transmission and non-glare properties. - The ballast and fixture umbrella are designed as a single unit for direct heat dissipation and high performance. *For more details, please refer to the PDF document or feel free to contact us.*
Reduce testing costs! No reaction force required, easy operation, and real-time evaluation of ground bearing capacity characteristics! (NETIS registered product)
The "Simple Support Strength Measuring Device Caspol" is a tripod-type measuring instrument that can evaluate the support strength characteristics of the ground in real-time. It features simple and easy operation, minimizes individual errors, and does not require reaction force, making it applicable in narrow spaces and mountainous areas. The measurement principle involves dropping a rammer equipped with an accelerometer onto the ground and calculating the strength constants necessary for the foundation support strength of structures from the maximum impact acceleration obtained from the collision. This single device can measure K30, qc, CBR, c, and φ (converted values from impact acceleration). 【Features】 ● No reaction force is required for loading, allowing for low-cost measurement of various parameters. ● Usable in sites where heavy machinery cannot enter, improving construction management quality. ● Measurement is quick and does not take much time. ● Compact and lightweight, easy to operate, and suitable for any tester. ● Powered by batteries, enabling field measurements without worrying about power supply. ● NETIS registered product: NO.KK-980055-V ● Can calculate the "allowable support strength of the ground" using measurement constants. (→ The calculation method is explained on the Marui website: http://www.marui-group.co.jp/support/caspfol.html)
![Concrete Bubble Structure Measurement Device [Easy and Quick Image Analysis!]](https://image.www.ipros.com/public/product/image/298/2000203810/IPROS6720426160221762601.jpg?w=280&h=280)
Easily and quickly measure the bubble structure of concrete using image analysis!
The amount of air and the bubble spacing coefficient obtained from the bubble structure meter of hardened concrete are important indicators of resistance to freeze-thaw cycles. The measurement methods include the "Linear Traverse Method" and the "Modified Point Count Method" specified by ASTM, but both require significant time and effort, and there is a problem of individual differences in measurements. The image processing analysis method developed using PCs to solve this issue had not yet established image recognition technology. To address these problems, Marui developed a unique bubble structure measurement device. By filling the bubbles in the concrete sample with cyanoacrylate containing fluorescent dye and then irradiating the sample with ultraviolet light, only the bubble structure emits light. At the same time, by binarizing the brightness at a certain threshold, image processing became possible. The operation and handling are also simple, allowing for easier and faster measurement of bubble structures than before.
![Digital Point Load Tester (Point Load Testing Machine) [No Power Required!]](https://image.www.ipros.com/public/product/image/1c1/2000205542/IPROS8249015582752429775.jpg?w=280&h=280)
No power supply needed, usable on-site! For tensile strength testing of unshaped rock and concrete specimens!
This is a testing device that can perform tensile strength tests on materials such as rock or concrete using non-shaped specimens. It can be used not only in laboratories but also on-site. The mechanism calculates and determines the tensile strength by applying point loads at two tips of the specimen.
Accurate judgment by measuring thickness continuously! It can operate automatically, eliminating the need for manual measurements!
In continuous thickness measurement, rather than measuring the thickness at specific points of the object, continuous thickness data is collected, making it easier to judge the condition of the object. This system is designed for continuous thickness measurement, where the measurement target is clamped from above and below using displacement sensors. Since the measurement is taken from below, it can still be measured even if there is vertical movement. Additionally, the measurement amount from the displacement sensors is output as pulses and input into a high-speed counter unit of a sequencer. 【Measurement Method】 - Since 1 pulse equals 0.1 μm, the thickness is determined by multiplying the pulse count by 0.1. - The signals from the upper and lower displacement sensors are processed to determine the thickness. - The object is clamped with rollers and fed at a constant speed by two stepping motors located before and after the displacement sensors. - The stepping motor operates when the measurement start button on the touch panel is pressed. - The stepping motor stops when the measurement is complete. *For more details, please refer to the PDF document or feel free to contact us.
No waiting time for measurements! A moisture meter that measures various biomass content rates.
The "humimeterBMA/humimeterBLL" is a wood biomass moisture meter manufactured by SCHALLER (Schaller Company/Austria). There is no waiting time required for measurements. The "humimeterBMA" can measure various biomass content rates and quickly displays the sample's dry weight, bulk density, temperature, and moisture. Additionally, the "humimeterBLL" can measure the moisture content by directly inserting it into the piled wood chips, allowing for immediate display without waiting. 【Features】 ■humimeterBMA ・Can measure moisture content from 5% to 70% (W.B) ・Can display resolution up to 0.1% (W.B) ■humimeterBLL ・Dedicated moisture meter with electric resistance for chips ・Can measure up to a depth of 1 meter *For more details, please refer to the PDF document or feel free to contact us.
Light Flash Analyzer for Thermal Diffusivity (Thermal Conductivity) Measurement Device.
The latest tabletop Xe flash analyzer enables rapid, easy, and highly accurate measurement of thermal diffusivity and thermal conductivity. It covers a wide measurement temperature range from -100°C to 1250°C, and with improved pulse width, it can also handle high thermal conductivity samples of thin films that were difficult to measure conventionally. It comes standard with a maximum of 16 auto-sample changers, allowing for highly accurate measurements of samples ranging from large diameters to very small diameters.
Devices that enable energy conservation and efficient use.
The HFM 446 Lambda is a thermal conductivity measurement device suitable for measuring the thermal conductivity of materials with low conductivity, such as insulation materials. The sample is placed between a hot plate and a cold plate, and the temperature difference is adjusted while the heat flux is measured with sensors. Stability is achieved in about 15 minutes, allowing for more measurements and increased productivity. With two heat flux sensors positioned, the error remains below 0.5% within 15 minutes, and during tests lasting several days, a very stable conductivity of 0.10 to 0.25% can be obtained. This allows for reliable data collection for simple inspections of product variability during the manufacturing process. 【Features】 ■ High precision, stability, and accuracy ■ Fast and easy operation ■ Automatic operation ■ Short setup time and quick start *For more details, please refer to the catalog or feel free to contact us.
Supports various materials! A wide range of ultra-precision measurement systems that achieve advanced measurements!
The "Dynamic Mechanical Analysis Measurement Device Catalog" introduces the "NETZSCH GABO Measurement System," which is utilized in various fields of material development worldwide, including fundamental research, product engineering, and quality control. It features the dynamic mechanical analysis measurement device "EPLEXOR," which measures the viscoelasticity and thermal properties of materials based on frequency, temperature, stress, strain, and thermal history, as well as the tackiness measurement device "GABOTACK," which measures the adhesive force at the contact surface, and the quality control measurement device "QUALIMETER," among many others. [Main Contents] ■ High-load DMTA ■ Flexometer ■ Tackiness measurement device ■ Quality measurement device ■ Humidity control options *For more details, please refer to the catalog or feel free to contact us.
Maximum measurement temperature 1100℃! Significant reduction in sample shape constraints! Rapid and accurate evaluation.
The "SBA 458 Nemesis" is a measurement device that can measure the Seebeck coefficient and electrical conductivity (1/Ωm) under identical conditions up to 1100°C. It accommodates various sample shapes, including square, rectangular, circular, and strip shapes. Sample exchange can be performed quickly and easily without the need for fixtures. Additionally, the double heater allows for the setting of any temperature gradient at each measurement temperature step. The appropriateness of the measurement can be verified by examining the deviation from the linear response when the temperature gradient is changed before and during the measurement, as well as checking for hysteresis. 【Features】 ■ Capable of measuring samples of various shapes ■ Immediate measurement start – easy sample exchange ■ Data verification function – double heater mechanism ■ Highly reliable short needle structure – solves solid diffusion problems ■ No need to measure the distance between short needles *For more details, please refer to the catalog or feel free to contact us.
Real-time visualization of odors! An odor measuring device that can monitor smells from remote locations via wireless data communication. *Compatible with Windows and Android!
"Before complaints arise from the surrounding factory environment! Shall we start odor countermeasures?" "Deomoni" is an odor measurement device that allows real-time monitoring of "odors" from anywhere when installed at property boundaries, etc. Measurement data is automatically sent via wireless communication to a PC or tablet connected to a USB receiver, and can be displayed in real-time on the PC or tablet. (Development has been completed to allow reception not only on Windows-based PCs and tablets but also on Android-based smartphones and tablets!) 【Features of Deomoni】 ■ Visualization of emitted odors enables daily management of odors ■ Remote monitoring of odors through wireless data communication ■ Monitoring of odors at up to 100 locations ■ Creation of calibration curves allows understanding of odor levels without olfactory measurement ■ Sensor elements can be customized according to the target odor 【Case Studies】 ■ Target facilities: Automotive painting processes, wastewater treatment facilities, electronic component manufacturing processes ■ Target odors: Solvent odors, burnt odors, hydrogen sulfide odors, alcohol odors, etc. *For more details, please refer to the catalog in PDF or feel free to contact us.
The inspection camera for inside pipes is available for rental starting from the 1st!
- It is used for various piping inspections, structural inspections, and inspections inside air conditioning ducts and exhaust pipes. - The white LED light illuminates the pipe walls, allowing clear images to be viewed on the monitor.
It is a precision-grade sound level meter that measures a wide bandwidth from 1 to 20,000 Hz.
- It is a precision-grade sound level meter that measures a wide frequency range from 1 to 20,000 Hz. - Measurement data can be recorded on a memory card (SD). - Menu display in Japanese. - Easy operation following the guidance on the screen. - Large color LCD screen.
