Last Updated： Aggregation Period:Mar 11, 2026～Apr 07, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 11, 2026～Apr 07, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 11, 2026～Apr 07, 2026
This ranking is based on the number of page views on our site.
1111～1140 item / All 1587 items
This is a checker for construction management of permeable concrete protective materials.
- This is a checker designed for the construction management of permeable concrete protective materials. - It is a product that complies with the "Application Discrimination Method for Permeable Concrete Protective Materials (Draft)" by the Civil Engineering Research Institute.
It is an alarm assistance device that alerts the operator with sound and the workers with sound and vibration when heavy machinery approaches from behind the workers.
- This is a warning assistance device that alerts the operator with sound and the workers with sound and vibration when heavy machinery approaches from behind the workers. - It is a NETIS registered product. [Registration No. KT-090057-VE] - A monitoring sensor is installed at the rear of the heavy machinery, and a warning buzzer is placed near the operator. (Magnet type) - The detection distance of the monitoring sensor can be switched; it is set to 10m when the heavy machinery is moving fast and 5m when it is moving slowly. - The monitoring sensor should be installed horizontally, at a height of 1.2 to 1.7 meters above the ground. - The monitoring sensor and warning buzzer are designed with a magnet for easy attachment and detachment. - Workers will attach a helmet sensor to the back of their helmets. (Rubber belt type) - The sensor attached to the back of the helmet does not detect within an approximate 120° range in front. - The monitoring sensor and helmet sensor are rechargeable. - Please specify the quantity of helmet sensors when placing an order.
It is possible to perform 3D measurement, drawing, and storage, and to output measurement results as 3D DXF data.
- It is a measuring device that integrates distance measurement and angle measurement (horizontal and vertical) functions. - By sequentially memorizing change points and corners of structures, it converts data into three-dimensional format. - The locations to be memorized are displayed on the controller with an 8x zoom image. - By measuring points in order that you want to digitize indoors, three-dimensional data can be created. - There is a function to move the main unit for measurement and overlay data before and after the movement. ☆ Measurement accuracy: 1mm at a distance of 10m ☆ The main unit and controller are connected via Wi-Fi ☆ Built-in 8x zoom camera allows for accurate confirmation of measurement targets even at long distances ☆ The main unit can be placed on a table or floor for use ☆ The touch panel controller is easy to operate for anyone.
Quality control of materials such as concrete, measurement of concrete thickness, and internal inspection.
◆◇◆【Same-Day Service】 Repairs and Calibration Available Domestically with FTS ◆◇◆ Next-Generation Ultrasonic Testing Machine Featuring Touch Screen Technology 【Features】 ■ Extremely durable display device designed for field use ■ Waveform display possible on the operation screen (zoom and scroll functions available) ■ Color touch panel designed for optimal operability and visibility ■ Adjustable pulse voltage and gain ■ 8GB flash memory (can store 100,000 A-scope data) ■ Dry coupling (PE sensor)
Quality control and thickness measurement of materials such as concrete. Internal investigation allows for the estimation of propagation time, propagation speed, measurement length, and crack depth, all in a compact form.
The Panjit series is a highly effective ultrasonic testing device in fields such as concrete, wood, ceramics, and bricks. It is also more compact and easy to carry. It is designed for ease of use in both field and laboratory settings. The operation employs an easy-to-understand touchscreen interface, allowing for adjustments like zooming in and out with fingertip control, similar to a tablet device. 【Features】 ■ Extremely robust display device designed for field use ■ Waveform display possible on the operation screen ■ LCD panel designed for optimal operability and visibility ■ Measurement data can be transferred to a computer via dedicated software ■ Adjustable pulse voltage and gain
It helps to check the reflectivity of road signs and conspicuous tape!
The ZRS 6060 (from Zenner) is useful for measuring the visibility of traffic signs and reflective materials using the retroreflection method. The device itself is lightweight, weighing approximately 2 kg, allowing for easy one-handed measurements. It also features a tilt function on the display, enabling the measurement results to be viewed from any angle. It is equipped with a high-resolution color touchscreen, allowing measurements to be taken under all conditions, day or night. 【Features】 - Equipped with an LED illumination system - Simultaneous measurement at three observation angles - Display tilt function - High-resolution camera included - Optional extension handle for measuring at high locations
Immediately grasp the quality in numerical terms after the construction of the column improvement. It is also clear whether the design pile length has been reached! *Available for rent.
This measurement method has been published in the "2018 Edition Guidelines for the Design and Quality Control of Improved Ground for Buildings." The "Mixing Tester Method (Electrical Resistivity Measurement Test)" is a quality control method for columnar improvement construction using slurry-type mechanical mixing deep mixing treatment. After the columnar improvement construction, a probe for inspection can be immediately inserted, and resistivity values can be recorded every 25 cm, allowing for quality assessment. It has obtained performance certification from the Japan Building Research Institute (GBRC). 【Features】 ■ Immediate confirmation of mixing conditions ■ Clear indication of whether the design pile length has been reached ■ Ability to retain numerical records ■ Measurement device is patented *Available for rental. If you are interested, please feel free to consult with us! For more details, please refer to the materials. Inquiries are also welcome.
Did the breaker trip again? You can easily check the cause and issues. Directly imported from America, easy to install, easy to handle, and features original measurement functions.
This product is a state-of-the-art tester developed by Livewire Innovation in the USA, designed to monitor circuit breakers and load-side electrical cables. It features our proprietary patented SSTDR (Spectrum Spread Time Domain Reflectometry) technology, which allows for immediate monitoring of circuit breaker movements and recording of the causes of incidents. By recording fault causes such as short circuits and arc discharges, as well as the distance of occurrence, the efficiency of post-incident diagnosis and fault elimination is significantly improved! Even if the circuit breaker does not operate, it can diagnose the cause if an anomaly occurs. In cases where the circuit breaker does operate, there is a backup power source that records the cause and distance! It is an original disconnector that can isolate the electrical cables waiting for testing from the disconnector, effectively detecting the location of any anomalies! 【Product Features】 - Proprietary patented SSTDR technology - Immediate cable detection: up to 300VAC, 40 amps - Detection of short circuit and arc discharge occurrence locations - Easy to "connect." Quick to remove and install - No complicated work such as stripping required ◆ If you have any inquiries or requests, please feel free to contact us ◆
データレンジは14倍向上！用途に応じて遠隔制御用コンピュータも利用可能です
『Amigo2』は、電子機器、マルチタッチディスプレイ、およびストレージを 1つの頑丈な筐体に組み込んだ、完全一体型の装置です。 データ処理を大幅に高速化できる高度な信号取得および処理システムを 中心に設計。 これにより、より滑らかで高解像度の表示が提供され、小さな欠陥の検出 性能と検査可能なコーティングの厚さが向上します。 【特長】 ■より素早い検査と、データ品質の向上 ■ソフトウェア：ポータブル本体搭載、リモート制御 ■プローブの下位互換 ■ACFM検査の本質：Assist ■世界に展開する、Eddyfi Technologies サービスセンター ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。
A portable measuring device capable of simultaneously measuring color, gloss, and surface texture.
The "spectro2profiler" is an innovative surface measurement device designed to achieve uniformity in color and surface condition. It uses 45°/0° annular illumination for color measurement. The proven innovative LED technology by BYK ensures excellent performance. Additionally, multiple images are captured from different lighting directions to infer the surface curvature. Based on the curvature, a surface height map is calculated, and objective measurements of cell size and perceived cell amplitude are obtained using water shade analysis. 【Features】 ■ Measures color as seen ■ Measures texture and gloss as seen ■ New 3D - Texture analysis ■ From traditional gloss to 2D reflectance *For more details, please refer to the PDF document or feel free to contact us.
It is possible to compare and evaluate the scratch resistance and adhesion of various coatings.
The "Hoffmann Scratch Hardness Tester" was developed for the comparative evaluation of scratch resistance and adhesion of various coatings. This measuring device is fixed to a carriage in a balanced state around a pivot axis with a four-wheel carriage. It is compact and pocket-sized, making it ideal for field use and demonstrations. It consists of a scratching tool with a pointed round rim at a 45° angle, designed for a scale arm that gradually changes from 0 to 20 and a flat test surface. 【Product Composition】 ■ Standard rider set ■ Mini rider and special scratching tool set ■ Carrying case ■ Operating manual *For more details, please refer to the PDF materials or feel free to contact us.
High-strength nylon toggle fastener
【Product Description】 ● Compatible with both hollow substrates (such as gypsum board, OSB board, plywood, steel plates, plastic boards, concrete blocks, etc.) and dense substrates (such as concrete and wood). ● Flexible screw holder compatible with various spiral screws and hooks. ● The toggle section, reinforced with fiberglass plastic and metal skeleton insert (DuoTec12), exhibits high tensile and shear strength in various panel building materials. ● The soft gray nylon contact surface distributes the load on the back of the panel. ● The white flange sleeve with snap function (DuoTec12) allows for quick installation of fasteners. ▼ For more details, please refer to our website. https://00m.in/121Hj
High-power plugs compatible with all base materials.
● The world's first high-power plug made from two materials: plastic and nylon ● Adapts to all types of base materials such as concrete, brick, ALC, gypsum board, and natural stone by transforming into three shapes: "expansion," "folding," and "knot" ● The serrated shape reduces co-rotation during screw tightening ● Can also be used with extruded cement boards ● Usable with small screws and coach screws ▼ For more details, please refer to our website. https://00m.in/yylJp
Prevent thermal bridging by installing insulation flush! Insulation fasteners with wood screws.
◆Compatible Base Materials - 3-layer solid wood - MDF plywood - OSB plywood ◆Functions and Usage - Fasteners are installed using a standard Torx T30 bit for flush mounting. - Use the dedicated tool T T S for embedding installation. Screw in the fasteners for precise installation positioning. Insert a separately sold cap into the countersink area to make it flush with the surface of the insulation material. - Rotate the disk of the dedicated tool T T S to make it flush with the surface of the insulation material. Install the fasteners without going too deep.
Construction screw fasteners with self-drilling screws featuring Delta-Seal coating for thin steel plates.
◆Applicable Base Material ・Thin steel plate / trapezoidal metal sheet, maximum thickness 1.5mm ◆Function and Usage ・Installation by fitting to the actual object through insulation material without pre-drilling. ・The appropriate driver bit is European type Phillips #2. ・Quick and easy installation with a cordless electric impact driver. ・Total thickness includes a load-free layer such as an adhesive layer.
Fastening for innovative EPS (bead foam polystyrene) insulation boards for various base materials.
◆Applicable Base Materials - European Technical Certification Base Material Classification (Normal Concrete, Solid Brick, Hollow Brick, Lightweight Concrete, ALC) - Normal Concrete - Concrete (Shell Structure) - Building Brick - Solid Limestone Brick - Lightweight Concrete Hollow Block - Vertical Hollow Brick - Hollow Limestone Brick - ALC - Lightweight Concrete - Sepa Parpaing (French-made Brick), etc. ◆Functions and Usage - Embedded through the perforated holes into the insulation material, using a setting tool to screw in. - The spiral disk and screw rotate simultaneously through the insulation material with the same pitch, locking in a co-rotating manner against the base material. - After that, the steel screw enters the expansion zone, compressing the compression zone up to a few millimeters thick, and adheres to the base material. - The setting is complete when the top surface of the insulation material and the bottom surface of the marking ring are flush.
Economic and strong screw fastening for insulation materials.
◆Applicable Base Materials - European Technical Assessment Base Material Classification (Normal Concrete, Solid Brick, Hollow Brick, Lightweight Concrete, ALC) - Normal Concrete - Concrete (Shell Structure) - Building Brick - Solid Limestone Brick - Lightweight Concrete Hollow Block - Vertical Hole Brick - Hole Limestone Brick - Lightweight Aggregate Concrete - ALC, etc. ◆Functions - Installation by aligning with the actual drill hole through the insulation material. - Seat excavation construction using the dedicated tool Setting Tool CS (sold separately). - As an option, the dedicated tool Setting Tool CS can be used in reverse for flush installation. - When using the dedicated tool Setting Tool CS in reverse, the stop disk is installed flush with the surface of the insulation material. - After seat excavation construction, a circular cover (sold separately) is attached. - No plug cap is required for flush installation. - For sizes of other types TermoZ CS ii 8 DT 110 V, please refer to the separate catalog.
Thermal bridge reduction for external thermal insulation composite system (ETICS) with elevated installation construction.
◆Applicable base materials - Concrete - Solid limestone bricks - Perforated bricks - Construction bricks - Lightweight concrete hollow blocks - ALC - Perforated limestone bricks
Insulation fasteners for insulation boards with wood screws, available in flush or countersunk specifications.
◆Features - Fischer wood screws that have holding power in the base material and are pre-assembled. - The special shape on the underside of the disc roughens the surface of the insulation material, allowing it to embed with reduced torque. - Clean installation using the dedicated tool 6H. Optionally, the dedicated tool CS can be used for counter-sinking installation with a combination of dedicated bits. - Quick installation with a minimum screw penetration depth of 24 mm, without the need for pre-drilling. - Installation can be considered for insulation material with a total thickness of up to 300 mm. - Counter-sinking installation provides a flat finish. ◆Applicable Base Materials - MDF plywood - OSB plywood - Chipboard - European gypsum board - Partitions - Solid wood, etc.
A work tool for screwing insulation discs in place during seat excavation construction.
The setting tools for seat boring construction are specially adjusted tools for each type of plug.
An entry-level three-dimensional coordinate measuring machine with excellent cost performance!
The "XYZAX SVF NEX" is a three-dimensional coordinate measuring machine capable of measuring dimensions and geometric tolerances. It features a high-rigidity gantry structure with a mezzanine bridge, guiding both sides of the bridge. The service station provides maintenance and support at 16 locations across Japan. Additionally, we have a dedicated contact point for inquiries about measurement methods, offering support via phone (free of charge). 【Features】 ■ Reliable measurement accuracy compliant with JIS standards ■ High-rigidity gantry structure that maintains stable accuracy over a long period ■ Reliable support system *For more details, please download the PDF or feel free to contact us.
It's retractable, making it convenient to carry! The parts can be replaced, allowing for long-term use of the stick ruler.
The "Stickler Measure" is a measuring tool that can measure long distances that are difficult to measure with tape measures and similar tools. It can be used by rolling it along while walking, even in places with curves and right angles, allowing for measurement by a single person. Among the series, the "HSM-110" is the most compact and easy to carry, the "HSM-210" is a best-selling model that balances storage and ease of measurement, and the "HSM-310" features large wheels for comfortable and more accurate measurement. We offer a rich lineup tailored to various applications. 【Features】 ■ Easy-to-hold grip ■ Compact portability with three-stage extension ■ The 10/20cm series includes an arrow for zero indication ■ Parts such as poles and tires can be exchanged *For more details, please refer to the PDF document or feel free to contact us.
A wide variety of options to suit your needs, including stand-mounted, lever lock type, and three-fold designs!
Here is an introduction to the "Walking Measure" that our company handles. We offer a rich lineup tailored to various needs, including the "Engineer Road Measure 1000" with a foldable stand, the "SK Digital Measure" that securely locks the stick with a lever lock mechanism, and the compact "Roller Boy" that folds into three parts. 【Lineup (partial excerpt)】 ■ Engineer Road Measure 1000 ■ Waterproof Digital Walking Measure ■ SK Digital Measure ■ Roller Boy ■ Road Measure, etc. *For more details, please refer to the PDF document or feel free to contact us.
Introducing a measuring device that can be used with AC100 to 210V! The piping and detection parts are made of stainless steel.
The "TMR-31S" is a compact, portable handheld device for measuring grout flow and pressure for liquid injection. It allows for specification settings for each step, enabling automatic injection with 20 levels of short and long quantity settings registered. Additionally, the keyboard is durable and easy to replace, and it features a bright and easy-to-read display. 【Features】 ■ All functions are available in one device ■ Certified product compliant with the Japan Grout Association specifications ■ Specification settings can be configured for each step ■ Easy handling of the recording section ■ The piping and detection parts are made of stainless steel *For more details, please refer to the PDF document or feel free to contact us.
A thermometer that can record the current temperature and nighttime temperature changes / Can also be introduced in manufacturing sites.
The Fisca temperature monitoring device can be set for five time intervals and features a 5LOG function that records temperature changes. It displays the current temperature as well as the temperatures from the past five selected time intervals, allowing you to check the temperature measured the previous night the next morning, making temperature management on-site easier. With a 20m temperature sensor, you can monitor the temperature trends near the center. Although it was developed for agricultural use, it can also be utilized for temperature management in manufacturing sites. *For more details, please contact us. 【Features】 ■ Lightweight waterproof plastic box for easy installation ■ Easy-to-read screen even in the dark ■ Extension power cord (optional) ■ 50m temperature sensor cable (optional) *For more details, please refer to the catalog. Feel free to contact us as well.
It is possible to record the height and deviation of overhead wires on a smartphone! This contributes to the efficiency and labor-saving of overhead wire measurement tasks.
The "Laser Overhead Line Measurement Device" handled by Kaneko Co., Ltd. can measure the height and offset of overhead lines safely, accurately, and easily. By utilizing an app, it is possible to record the height of the overhead line measured with a laser rangefinder and the offset read by image recognition within a smartphone. This contributes to the efficiency and labor-saving of overhead line measurement tasks. Additionally, there is no need to fill out handwritten field notes, eliminating errors in hearing and recording. 【Features】 ■ Safely, accurately, and easily measure the height and offset of overhead lines ■ Ability to record the height and offset of overhead lines within a smartphone ■ Contributes to the efficiency and labor-saving of overhead line measurement tasks *For more details, please refer to the PDF document or feel free to contact us.
Inspection capabilities that meet trust. A professional company in non-destructive testing and heat treatment.
Kansai X-ray Co., Ltd. has been striving for "trust, effort, and safety" as our corporate motto since our establishment in 1961, always aiming for "greater progress" and "greater stability." In recent years, we have focused on developing new technologies and new equipment to provide advanced technology that meets our customers' needs. We are committed to responding to your requests in a wide range of fields, including not only non-destructive testing but also heat treatment work, equipment diagnosis, technology development, and human resource education. Japan's manufacturing, which boasts the highest level in the world, is supported by our technologies in "non-destructive testing" and "heat treatment" to ensure quality control and safety on-site. 【Technical Capabilities of Kansai X-ray Co., Ltd.】 - Non-destructive testing - Heat treatment - Technology development - Equipment diagnosis - Human resource education For more details, please contact us or download our catalog.
It is a frequency-selective level measuring instrument that covers the frequency range from the audio band to the carrier band.
Handheld and battery-operated. The measurement frequency range is from 100Hz to 2MHz. The measurement bandpass filter allows for the selection of three bandwidths (6Hz, 70Hz, 3.1kHz) and can also be used as a flat level meter without a filter. Measurement data can be recorded to an SD card of up to 2GB.
The temperature control/CO2 compatible model has been renewed! The measuring device has significantly reduced condensation.
The high-sensitivity bioluminescence measurement device "CL24A/CL96A (ver.2)" is an ultra-high sensitivity bioluminescence measurement device equipped with temperature and CO2 gas control functions. It allows for real-time measurement of biological samples while keeping them alive in an environment where temperature and CO2 concentration are controlled, making it ideal for measuring animal-derived cells. Vibrations, which can be problematic in the measurement of cultured cells, have been minimized to the extreme. It can simultaneously measure up to two standard 24-well or 96-well plates. 【Features】 ○ Temperature/CO2 gas control functions are standard ○ Equipped with an ultra-high sensitivity detector (The CL24A can optionally be equipped with optical filters) ○ The measurement analysis software "Analysis NINJA," which is easy for anyone to operate, is included as standard ○ Vibration reduction, condensation reduction ○ The CL24A can optionally be equipped with a CO2 gas humidification chamber (* Optional at the time of order) For more details, please contact us or download the catalog.
Digital and analog display of R-value is possible! Test hammer compliant with JIS A 1155 standards.
The "Schmidt Live-L" is a test hammer equipped with automatic angle correction and outlier deletion functions. There are two methods for saving measurement results: a printer and a web application. The dedicated Bluetooth printer can print in real-time. With the dedicated app, results are displayed in real-time on an iPhone, and data can be converted to PDF or CSV. 【Features】 ■ Automatic angle correction function ■ Outlier deletion function ■ Digital and analog display of R values ■ Original curve creation function ■ Report creation function *For more details, please refer to the PDF materials or feel free to contact us.
