1～15 件を表示 ／ 全 38 件
This is a standard product used under the chute of a belt conveyor!
The impact of materials falling from hoppers and chutes onto the conveyor is mitigated by the deformation of a rubber ring shaped like a mountain, which helps reduce damage to the belt and idlers. Please use it for materials with a relatively light specific gravity (1.0t/m³ or less) or those with weak drop impacts. Trough angles of 35° and those not listed are made to order.
Standard carrier idler with conventional type stand specifications.
It is an idler that supports the belt on the side that transports the cargo (the carrier side) of a belt conveyor that carries bulk materials such as crushed stone, soil, sand, gravel, ore, and grains.
Carrier idler used for flat transport.
In addition to "bulk items" such as beer cases, cement bags, and grain bags, it can also be used for belt conveyors that transport "loose items" via skirt rubber. It is also compatible with conveyors using corrugated belts and steep incline belts.
Impact idler with conventional type stand specifications.
The impact of falling materials from hoppers and chutes is mitigated by the deformation of groove-shaped impact rubber, which alleviates damage to belts and idlers.
Impact idler with conventional type stand specifications.
The impact of falling materials from hoppers and chutes is mitigated by the deformation of hollow-type impact rubber, which alleviates damage to belts and idlers.
Carrier idler with an automatic centering function ideal for adjusting belt waviness and misalignment.
When the belt comes into contact with the guide roller positioned in front of the pivot axis connecting the upper and lower double-structured frame, the frame (F2) pivots within a certain angle range. The resultant force generated at this time, due to the function that returns the belt to the center of the conveyor, allows for adjustments of wandering and misalignment with minimal force applied, resulting in less damage to the belt.
Conventional type bracket specification for ore drop prevention return idler.
This is a return idler that connects two rollers with a joint link. It has a structure where the belt does not come into contact with the rollers at the center of the belt width.
Conventional type bracket specification for ore drop prevention return idler.
This is a return idler that places multiple rubber rings on the surface of a steel roller to reduce the contact length with the belt, thereby decreasing the drop of materials adhering to the belt (material fall).
Return idler that improves belt wandering and misalignment through the automatic centering function of tapered rollers.
Similar to the JAR-T type, the side rollers are tapered return idlers. The principle of occurrence for meandering and offset adjustment is the same, but as a structural difference, a pivot axis is arranged at the bottom of each tapered roller support on the left and right, eliminating the pivot frame to improve pivot sensitivity. This product can also be used in conveyors for both forward and reverse operation.
Automatic centering return idler arranged to press down the tapered rollers from the top surface of the belt.
This is a self-aligning idler on the return side, arranged to press a tapered roller against the top surface of the belt within a double-structured frame. It has a high ability to correct wandering due to its ease of conforming to the curling tendency of the return belt.
Automatic centering return idler arranged to press the tapered rollers from above the belt surface.
This is a self-aligning idler on the return side, designed to press a tapered roller against the upper surface of the belt within a double-structured frame. It has a high ability to correct wandering due to its ease of following the curling tendency of the return belt.
Return idler that corrects belt wandering and misalignment using belt tension and friction.
Similar to the ARP-2 type, this idler corrects the wandering of the return side belt by utilizing belt tension and friction. Since the roller contacts the back surface of the belt, there is no adhesion of transported items to the roller. Additionally, it can also be used for conveyors operating in both forward and reverse directions.
A lightweight and compact carrier idler compared to conventional JIS standard products.
This is a carrier idler that achieves weight reduction and space-saving by reducing the roller diameter and using thinner stand material compared to conventional JIS standard products.
A lightweight and compact return idler compared to conventional JIS standard products.
This is a return idler that has achieved lightweight and space-saving design by reducing the roller diameter and bracket size compared to conventional JIS standard products.
A lightweight and compact spiral return idler compared to conventional JIS standard products.
This is a spiral type roller of the lightweight return idler (LR type).
