Construction method Product List and Ranking from 1590 Manufacturers, Suppliers and Companies | IPROS

Last Updated： Aggregation Period:Apr 15, 2026～May 12, 2026
This ranking is based on the number of page views on our site.

Construction method Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Apr 15, 2026～May 12, 2026
This ranking is based on the number of page views on our site.

  1. ネプラス工法全国会 本部 Niigata//General contractors and subcontractors
  2. 徳和工業 Miyagi//Other construction industries
  3. TRAWE main office Saitama//Other construction industries
  4. 4 コンステック Osaka//General contractors and subcontractors
  5. 5 大建工業 Tokyo//Building materials, supplies and fixtures manufacturers
Go to Company Ranking

Construction method Product ranking

Last Updated： Aggregation Period:Apr 15, 2026～May 12, 2026
This ranking is based on the number of page views on our site.

  1. 側溝修繕工法『ネプラス工法』＜施工前後の写真付き資料進呈＞ ネプラス工法全国会 本部
  2. Vacuum concrete construction method 徳和工業
  3. 建物外壁工事　ロープアクセス工法 TRAWE main office
  4. 4 D-Lite D Board Method [Non-combustible decorative panel that can be processed on-site] 大建工業
  5. 5 Wet blasting method "Moisture Blast" 好川産業

Construction method Product List

1201～1230 item / All 4297 items

Displayed results
Anchor panel

Anchor panel

Permeable sheets can be installed as needed! Corrections for slope angle and drilling angle can be made up to a maximum of 15°.

The "Anchor Panel" is a pressure distribution plate for ground anchors that combines a fiberglass-reinforced plastic (GFRP) lattice panel with a rigid frame. The rigid frame is protected against corrosion with hot-dip galvanized coating plus urethane paint or polyethylene paint, and the design also takes corrosion protection costs into account. The opening ratio of the pressure distribution surface is over 40%, allowing it to be completely covered in combination with greening work. Depending on the design anchor and soil bearing capacity, it can be selected from 9 standard types, and special sizes can be manufactured according to the pressure distribution area and load. 【Features】 ■ Composite pressure distribution plate combining FRP lattice panel with steel frame (SS400) ■ Opening ratio of over 40%, suitable for greening ■ Lighter and lower in height compared to concrete pressure distribution plates ■ As a secondary product, it does not require a curing period, enabling a reduction in construction time ■ Not limited to specific anchors, can be manufactured according to design loads and dimensions suited to the site *For more details, please refer to the PDF materials or feel free to contact us.

  • panel
  • Wall and rooftop greenery
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Safer and more efficient asbestos removal. New method using chemicals and high-pressure mist.

Safer and more efficient asbestos removal. New method using chemicals and high-pressure mist.

Finishing in one go with ultra-high pressure mist. Achieving safe and speedy removal even with a small number of people.

Our company has started a leasing business for the JP method to safely and quickly carry out the demolition of structures containing asbestos. We provide comprehensive support for the cumbersome procedures with local governments, pre-demolition surveys and analyses, worker training, and machinery operation and maintenance. This addresses labor shortages and health issues for workers. 【Our Company’s Highlights】 ■ For Architects We offer total support for procedures with local governments, measures for neighboring areas, and analyses of air quality and filters. ■ For General Contractors and Subcontractors Dedicated staff will manage pre-training for workers, oversee operations, assist with work, and maintain machinery on-site. ■ Key Points of the Method - Uses less water compared to high-pressure washers, reducing waste volume and disposal costs. - Sprays an asbestos dust prevention agent "JP-2000," allowing for removal and compression using suction devices, effectively preventing asbestos dispersion. - While traditional methods require mobilizing 50 workers, the "JP method" can be executed with just two machines. *For more detailed information, please download the PDF. *For inquiries about the new method leasing, please feel free to contact us.

  • Renovation and repair methods
  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Curing agent "Rock Mighty"

Curing agent "Rock Mighty"

A solidifying agent primarily composed of lime, properly blended with inorganic materials! You can select the type suitable for the site based on the soil being treated and the construction method!

"Rock Mighty" is a solidifying agent primarily composed of lime, properly blended with inorganic materials. This product includes three types: dust suppression solidifying agent, lime-based solidifying agent, and lime-cement composite solidifying agent. You can select the appropriate type for your site based on the soil being treated or the construction method. 【Features】 ■ Uses lime as the main component ■ A solidifying agent properly blended with inorganic materials ■ Allows selection of the appropriate type for the site based on the soil being treated or the construction method *For more details, please request documentation or view the PDF data available for download.

  • Reinforcement and repair materials
  • Ground improvement materials
  • Ground foundation construction method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Lime for ground improvement "Quicklime"

Lime for ground improvement "Quicklime"

We offer products that leverage the characteristics of both hard burn and soft burn!

"Quicklime" is produced by calcining high-purity washed limestone in a superior Bekkenbach-type heavy oil calcination furnace. Due to its extremely high quality, it is highly reactive, and we can provide products that utilize the characteristics of both hard-burn and soft-burn to meet the needs of our customers. [Features] ■ Produced by calcining high-purity washed limestone ■ High quality ■ High reactivity *For more details, please refer to the catalog or feel free to contact us.

  • Ground improvement materials
  • Fertilizers and Pesticides
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wooden deck/fence/railway sleeper [parks, commercial facilities, private homes, etc.]

Wooden deck/fence/railway sleeper [parks, commercial facilities, private homes, etc.]

"Preservative-treated wood" designed and constructed to meet various needs. We propose external spaces for landscaping and gardens, including 'decks, wooden fences, and sleepers.'

At Sanmoku Kogyo Co., Ltd., we offer 'decks/fences (wooden fences)/sleepers' that can be used for gardening. We have a lineup that includes 'decks' made from beautifully grained, expressive Ulin wood that ages gracefully alongside traditional houses, as well as 'fences (wooden fences)' featuring square timber with a gap and a benigara finish that serves as an accent. We propose external structures and garden spaces, providing design and construction tailored to diverse needs. 【Products Offered】 ■ Decks ■ Fences (Wooden Fences) ■ Sleepers *For more details, please refer to the PDF document or feel free to contact us.

  • wood
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Construction method "Refresh Shower Method"

Construction method "Refresh Shower Method"

Waterproofing of existing railway slabs that contributes to reducing maintenance burdens caused by water leakage!

The "Refresh Shower Method" is a leak repair technique performed from the top surface of the slab. It allows for waterproofing of the slab simply by spraying an impregnating waterproofing material from the track, without the need to remove the ballast. This method not only extends the lifespan of concrete structures but also reduces the maintenance burden caused by leaks, such as complaints from users under elevated structures and emergency measures like the installation of rain gutters. 【Features】 ■ Leak repair performed from the top surface of the slab ■ No need to remove ballast ■ Waterproofing of the slab can be done simply by spraying an impregnating waterproofing material from the track ■ Extends the lifespan of concrete structures ■ Reduces the maintenance burden caused by leaks *For more details, please refer to the catalog or feel free to contact us.

  • Renovation and repair methods
  • Special Construction Method
  • Waterproofing work
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Construction method "Non-stop Water Freezing Method"

Construction method "Non-stop Water Freezing Method"

Water stoppage is possible even in places without valves! A freezing method that enables construction in a short period.

The "Continuous Water Freezing Method" temporarily freezes the water in the pipes using liquid nitrogen to act as a valve, allowing for construction to be carried out in a short period without shutting off water supply to the entire building. This method enables construction with partial and short-term water outages. It is suitable for piping work in various facilities. 【Features】 ■ Reduction of water outage range ■ Suppression of red water occurrence ■ Shortening of water drainage and filling time ■ Usable when replacing broken valves *For more details, please refer to the catalog or feel free to contact us.

  • Special Construction Method
  • Piping Equipment
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Numata Construction Co., Ltd. "Palforce Mortar Method"

Numata Construction Co., Ltd. "Palforce Mortar Method"

Ideal for hollow filling work! Palforce mortar method.

The "Paruforce Mortar Method" is a bubble mortar technique that mixes the fibrous material "Paruforce" with cement, water, and bubbles (foaming agent). It is possible to produce bubble mortar with stable quality and minimal material separation, as well as bubble mortar mixed with construction sludge and incineration ash. This is a completely new method aimed at building a circular society from the perspective of environmental recycling. 【Features】 ■ Lightweight ■ Improved pumpability ■ Enhanced durability ■ Increased fillability ■ Improved separation resistance *For more details, please refer to the catalog or feel free to contact us.

  • Civil Engineering Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water Stop Method: Rooftop Waterproofing Layer Renewal Method

Water Stop Method: Rooftop Waterproofing Layer Renewal Method

Significantly reduce construction days! Rooftop waterproofing layer regeneration method using Alpha-Zol G.

We would like to introduce a construction method using "Alpha-Zol G," which enhances the durability and water-tightness of concrete structures and can effectively block leaks. This method allows for reliable restoration of rooftop waterproofing without the need to move rooftop equipment, handrails, or signs. Compared to conventional methods, it is low-cost and does not generate construction industry waste. It significantly shortens the construction period, with minimal noise, waste, unpleasant odors, and dust during the construction phase, and does not require extensive temporary construction. 【Features】 ■ Lower cost compared to conventional methods ■ No construction industry waste generated ■ Significant reduction in construction days ■ No need for extensive temporary construction ■ Partial construction and repairs are possible (limited to specific areas) *For more details, please refer to the PDF document or feel free to contact us.

  • Waterproofing Agent
  • Waterproofing work
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Back-pressure injection waterproofing method

Back-pressure injection waterproofing method

Ideal for existing underground water stoppage! Back-injection water stopping method using Alpha-Zol G.

We would like to introduce a construction method using "Alpha-Zol G," which enhances the durability and water-tightness of concrete structures and can effectively block water leaks. This method targets water leaks from multiple sources, such as honeycombing, construction joints, separators, and cracks, making it ideal for waterproofing existing underground structures. The waterproofing effect is stable over the long term, and the product complies with standards, ensuring safety. 【Features of the Method】 ■ The injection material identifies the source of the leak and stops it. ■ Excellent adhesion to wet concrete at leak points. ■ The materials (solvent-free) and method are safe for the surrounding environment and workers. ■ Superior resistance to seawater, acids, alkalis, and chemicals. ■ Provides stable waterproofing performance over the long term. ■ Partial construction is possible. *For more details, please refer to the PDF document or feel free to contact us.

  • Waterproofing Agent
  • Waterproofing work
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Injection Water Stopping Method: Alpha-Zor-G High-Pressure Injection Water Stopping Method

Injection Water Stopping Method: Alpha-Zor-G High-Pressure Injection Water Stopping Method

Achieves long-term water stopping effects without damaging structures! High-pressure injection water stopping method using Alpha-Zol G.

We would like to introduce a construction method using "Alpha-Zol G," which enhances the durability and water-tightness of concrete structures and can effectively block water leakage. It can fill even the fine gaps caused by cracks, ensuring reliable water stoppage. This method is effective against leaking water that seeps, stains, or drips in concrete structures and buildings. Additionally, by using auxiliary agents, it can also handle strong water leaks. Furthermore, the plug length is set to 100mm, making it less likely to cause concrete damage during high-pressure injection, thus protecting the structure. 【Features】 ■ Reliable water stoppage ■ Does not damage the structure ■ The plug diameter is Φ10mm, making repair marks less noticeable ■ Water-based material that does not contain organic solvents, ensuring safety for workers and the environment *For more details, please refer to the PDF document or feel free to contact us.

  • Waterproofing Agent
  • Waterproofing work
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Highness Waterproof Specification Modified Asphalt Waterproofing Cold Adhesive Method

Highness Waterproof Specification Modified Asphalt Waterproofing Cold Adhesive Method

It is a waterproof construction method with no carbon dioxide emissions, using a room temperature adhesive type that has low environmental impact.

This catalog is the specification sheet for Highness Waterproofing published by Showa Stone Chemical Co., Ltd. The "Highness Waterproofing" method developed by our company is a room temperature adhesive method that involves peeling off the release paper to adhere a sheet that retains a modified asphalt adhesive layer. It is fundamentally a revolutionary waterproofing method that does not produce fire or smoke and is environmentally friendly. [Contents (excerpt)] ■ Specifications corresponding to the Standard Specifications for Public Building Construction ■ Specifications corresponding to the Architectural Institute of Japan ■ Manufacturer specifications - Exposed waterproofing adhesion, non-insulated, multi-layer, H-MF21 - Exposed waterproofing insulation, insulated, multi-layer, H-MS31T *For more details, please refer to the PDF materials or feel free to contact us.

  • Renovation and repair methods
  • Waterproofing work
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Bed waterproofing

Bed waterproofing

Introduction to deck waterproofing that supports the economic design of bridges!

This is an introduction to road pavement drainage systems and reflection crack suppression sheets, as well as waterproofing of slabs using no-joint methods. High construction technical skills and high-performance waterproofing materials are required for slab waterproofing. Furthermore, if durable asphalt pavement is used, the waterproofing function can be maintained for an extended period. 【Lineup】 ■ Sheet-type waterproofing ■ Heated coating waterproofing ■ Road pavement drainage system "Pave Drain" ■ Reflection crack suppression sheet "Fuji Crack Sheet" ■ Showa Stone No-Joint Method *For more details, please refer to the PDF materials or feel free to contact us.

  • Renovation and repair methods
  • Waterproofing work
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PVA aqueous solution

PVA aqueous solution

We respond to various needs such as "mixing," "dissolving," and "portioning"!

The "PVA aqueous solution" is a water solution of PVA (polyvinyl alcohol), which has a wide range of applications including adhesives, paper processing, suspending agents, emulsifiers, fiber processing, and molding. To dissolve PVA from its powdered form into an aqueous solution, specialized equipment is required, making it quite challenging. Additionally, the demand for PVA aqueous solutions varies greatly depending on the application. We propose suitable PVA aqueous solutions tailored to our customers' diverse needs and engage in their manufacturing and sales. This product is designed to meet those customer needs. 【Flow of Product Transaction】 ■1. Selection of the PVA to be used (PVOH: polyvinyl alcohol) ■2. Determination of concentration ■3. Decision on manufacturing unit and packaging form ■4. Decision on the presence or absence of preservatives ■5. Determination of delivered products *For more details, please refer to the PDF document or feel free to contact us.

  • Medicines
  • others
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Construction method "CBM method"

Construction method "CBM method"

A construction method using a compact propulsion device that enables highly efficient excavation!

At Kinki Development Co., Ltd., we handle the "CBM Method," which is constructed using a small-sized thrust machine developed for horizontal boring (double casing method) from a launch shaft of 2,000mm to 4,000mm. The construction range is smaller, allowing for cutter head replacement during excavation (casing return type). Therefore, it can accommodate various soil types and obstacles. 【Features】 ■ Adopts horizontal boring method (double casing method) ■ Uses a small-sized thrust machine for construction ■ Smaller construction range ■ Cutter head replacement during excavation (casing return type) is possible ■ Capable of handling various soil types and obstacles *For more details, please refer to the catalog or feel free to contact us.

  • Special Construction Method
  • Earthworks
  • Ground foundation construction method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Case Study on Seismic Mats and Seismic Fixtures: Seizan-kai Medical Corporation Kawaminami Hospital

Case Study on Seismic Mats and Seismic Fixtures: Seizan-kai Medical Corporation Kawaminami Hospital

Protecting local healthcare through earthquake-resistant construction while boosting staff motivation!

We would like to introduce a case where a private hospital in Kawaminami Town, Koyu District, Miyazaki Prefecture, has implemented "seismic mats and seismic fittings." At Kawaminami Hospital, it was considered necessary to ensure the safety of patients and staff working within the hospital by retrofitting the hospital's equipment and facilities for seismic resistance. To maintain the hospital in good condition for a long time, the hospital chose appropriate seismic construction methods for the building as a solution, and implemented seismic retrofitting within the hospital using our "Anchorless Seismic Method," which does not require drilling into the building. [Challenges] ■ Aiming to be a medical institution that can be of help to the community during disasters. *For more details, please request materials through "Contact Us" or use the "PDF Download" on 'Ipros Manufacturing.'

  • Earthquake-proof and vibration-damping equipment
  • Disaster prevention supplies
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Slope Countermeasure Work "High Strength Net Method"

Slope Countermeasure Work "High Strength Net Method"

Slope stabilization work without using concrete structures!

The "High-Strength Net Method" is a flexible slope stabilization technique that uses high-strength nets made from hard steel wire with a nominal tensile strength of 1,770 N/mm² as the main material. By fully utilizing its mechanical properties, it enables safe slope stabilization within a short construction period. Additionally, various nets are available for different applications, allowing us to meet a wide range of diverse needs. 【Features】 ■ Quick installation ■ Wide applicability ■ Cost-effective ■ Environmentally friendly *For more details, please download the PDF or feel free to contact us.

  • Renovation and repair methods
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Power Net Method

Power Net Method

Introduction to construction methods that can handle collapses with a presumed slip layer thickness of 1.5m or less as the standard.

This technology is a method to prevent overall landslides that occur across the entire surface layer of a slope, as well as localized collapses that occur within a narrow range between full-threaded deformed steel nails (hereinafter referred to as "nails"). It consists of an effective assembly of components against surface layer collapses by connecting and combining high-strength wire mesh, nails, spike plates, and other materials. There are two types of methods: one that addresses surface sliding using wire mesh and another that addresses falling stones and floating rocks using spider nets. 【Features】 ■ Designed to respond to collapses with an assumed sliding layer thickness of 1.5m or less ■ Effective component configuration against surface layer collapses *For more details, please refer to the PDF materials or feel free to contact us.

  • Civil Engineering Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reinforced Soil Wall Method "Tensor FW Method"

Reinforced Soil Wall Method "Tensor FW Method"

Introducing the "Tensor FW Method" from the tensor-reinforced earth wall construction methods that boast exceptional connection strength!

The "Tensor FW (Flexible Wall) Method" is a reinforced soil wall construction method that uses a geogrid tensor with strong junctions formed by integral molding as a reinforcement material, which is firmly connected to a FW frame (a welded wire mesh forming material) to stabilize the embankment. It is lightweight and easy to work with, and it allows for height adjustments at the top. The structure is designed to accommodate settlement due to embankment consolidation and freezing/thawing. Additionally, the frame material can be freely cut on-site using tools like clippers, allowing it to adapt to corners, curves, and longitudinal slopes. 【Features】 ■ Simple connection between the formwork and tensor with excellent connection strength ■ Structure that accommodates settlement due to embankment consolidation ■ Accommodates freezing and thawing ■ Lightweight and easy to work with ■ Height adjustment at the top is possible *For more details, please refer to the PDF document or feel free to contact us.

  • Civil Engineering Method
  • Reinforcement and repair materials
  • Reinforced earth wall
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Soil Cutting Slope Reinforcement Method "Makisel Multi-layer Stacking Method"

Soil Cutting Slope Reinforcement Method "Makisel Multi-layer Stacking Method"

Connecting cylindrical tensors with a tensor joiner! Introducing a method to stabilize the slope surface.

The construction method involves connecting tubular tensioners with a tensioner joiner, and after installing a structure filled with locally generated soil on the cut slope, it stabilizes the slope. The materials are lightweight, making assembly and on-site adjustments easy, thus shortening the construction period. This method can also be applied in areas where the installation of conventional mattress baskets is difficult, as well as in locations where the soil is acidic or alkaline, raising concerns about durability due to rust and other factors. 【Features】 - Locally generated soil can be used and filled inside the tubular geogrid structure. - The materials are lightweight and easy to assemble on-site. - The flexible structure can adapt to bends and curves. - Greening of the slope is possible. - The geogrid tensioners are made of high-density polyethylene, preventing rust and offering excellent chemical stability. *For more details, please refer to the PDF materials or feel free to contact us.*

  • Ground foundation construction method
  • Various blocks
  • Stacking blocks
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Anchor panel (ground anchor pressure plate)

Anchor panel (ground anchor pressure plate)

Pressure plates for ground anchors. Custom manufacturing is also possible based on the required load and area at the site. Compatible with various types of ground anchors.

This is a composite pressure-bearing plate that combines a grid-shaped panel made of FRP with a steel frame. It features a panel with an opening ratio of approximately 70%, ensuring high water permeability, making it suitable for sites where measures against groundwater are required. It is registered in the anchor construction design calculation system 'ANCHOR'. 【Water Permeability】 The grid-structured panel has a high opening ratio of approximately 70%, providing excellent water permeability. It ensures the water permeability of the ground even in sites where measures against groundwater are necessary. 【Greening】 The grid-structured panel has a high opening ratio of approximately 70%, making it excellent for greening. The grid sections contain vegetation substrates, creating a structure that is difficult for runoff to occur.

  • Slope protection material
  • Road construction
  • Erosion control works
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Surface treatment methods for marine structures and related materials.

Surface treatment methods for marine structures and related materials.

Introducing a coating method that combines our unique primer technology with inorganic materials! *Free sample plates for evaluation available.

"GlassEco" is a coating method that imparts superhydrophobic properties and marine organism adhesion prevention effects to the surfaces of components exposed to seawater, such as LNG vaporization facilities and marine structures. Our company is advancing the development of this coating method by utilizing the subsidy project "Next Generation Innovation Creation Project 2020" from the Tokyo Small and Medium Enterprise Promotion Corporation. If you have any requests from marine structure facility managers, maintenance construction companies, or civil engineering consultants, we will provide free sample coated panels for evaluation. Please feel free to contact us. 【Features】 ■ Durable superhydrophobic surface treatment with a contact angle of over 150° ■ Durable marine organism adhesion prevention surface treatment lasting over 2 years ■ Free sample panels for evaluation ■ Free trial application may be considered depending on the consultation content *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra High Pressure Cleaning Method (SWB Method)

Ultra High Pressure Cleaning Method (SWB Method)

The issues regarding tunnel cleaning have been resolved, and the illumination has been restored! This improves visibility and enhances the safety of vehicles traveling through the tunnel.

The technology is a system that automatically sprays clean water at ultra-high pressure (around 50 MPa) to collect wastewater. It involves a coordinated unit assembly operation and performs non-contact construction on concrete surfaces, eliminating the risk of noise, vibration, and dust pollution. As a result, it resolves issues related to tunnel cleaning, restores illumination, improves visibility, and enhances the safety of vehicles in operation. 【Features】 - Automatically sprays clean water at ultra-high pressure (around 50 MPa) and collects wastewater - Coordinated unit assembly operation - Non-contact construction on concrete surfaces - No risk of noise, vibration, or dust pollution *For more details, please refer to the PDF materials or feel free to contact us.

  • Special Construction Method
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Strand sheet reinforcement method

Strand sheet reinforcement method

This is a groundbreaking method that fundamentally solves the problems of sheet swelling and defects associated with conventional continuous fiber sheet bonding techniques.

This technology involves processing FRP strands that have been impregnated and cured with resin into sheets, which are then adhered to the surface of concrete structures using a specialized adhesive for repair and reinforcement methods. It can be applied to reinforcement measures for cantilever slabs in concrete bridge decks and the upper parts of main girders. Additionally, it can be used for concrete slabs that suffer from insufficient strength due to floor slab improvements or the increased size of loading vehicles corresponding to the year of bridge construction. The effectiveness of this method increases particularly in areas with heavy traffic where road restrictions occur. 【Features】 ■ Immediate sheet application after surface preparation ■ Excellent workability without the need for resin impregnation or degassing ■ Short construction period and cost-effective ■ Simple and high quality ■ Significant reinforcement effect *For more details, please refer to the PDF materials or feel free to contact us.

  • Renovation and repair methods
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Construction method "Hanch Frame Method"

Construction method "Hanch Frame Method"

The site spraying method for frame construction that preserves the land in the most natural form!

The "Hanchi Frame Method" is a site spraying formwork method that uses recycled formwork materials, taking environmental considerations into account. It achieves a high finishing accuracy that surpasses the common standards of mortar spraying work. Additionally, by providing a hanchi at the intersection of beams where stress concentrates, it is possible to enhance stability not only from an aesthetic perspective but also from a mechanical one. 【Features】 ■ Uses recycled formwork materials ■ Excellent durability ■ Lightweight ■ Made from polypropylene with excellent processability ■ Safe anti-corrosion treatment *For more details, please download the PDF or feel free to contact us.

  • Special Construction Method
  • Renovation and repair methods
  • River construction
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water-stopping special grout mortar "Pipe Grout"

Water-stopping special grout mortar "Pipe Grout"

Just mix and inject with the original packaging pack! Water-stopping special grout mortar.

"Pipe Grout" is a special water-stop grout mortar that enhances the water-stopping performance of backfilling around pipe penetrations to prevent leakage accidents. The original packaging pack significantly reduces working time without making a mess. Additionally, it has good fluidity in a slurry form, allowing for clean filling in narrow spaces from a single injection point. 【Features】 ■ Stable quality ■ Prevents cracking ■ No need for mixing water or tools due to the original packaging pack ■ Significantly reduces working time ■ Demonstrates water-stopping effect at a filling depth of 30mm *For more details, please download the PDF or feel free to contact us.

  • Company：Toho
  • Price：Other
  • Cement mortar coating
  • Mortar and plaster materials
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Concrete joint construction material "Air Fence"

Concrete joint construction material "Air Fence"

Supports colorful concrete formwork! Construction joint materials that contribute to labor-saving in architecture.

"Air Fence" is a component used for concrete formwork in concrete construction, including pressure slabs, foundation beams, slabs, beams, and walls. By introducing new materials from conventional products, we have achieved weight reduction and improved construction efficiency. Additionally, it is now available at a more affordable price. Furthermore, we offer proposals that consider cost and quality, such as using our products in conjunction with wire mesh. 【Features】 ■ Water-stopping effect ■ Improved joint strength ■ Reduced material costs through repurposing ■ Enhanced quality *For more details, please refer to the PDF document or feel free to contact us.

  • Company：Toho
  • Price：Other
  • Concrete construction
  • others
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Weed control block (pedestrian-vehicle boundary block, L-shaped gutter)

Weed control block (pedestrian-vehicle boundary block, L-shaped gutter)

A next-generation block that stops weeds from growing on their own!!

The "Weed Block" focuses on the growth mechanism of plants (tropism) and is developed based on evidence obtained from years of empirical research. Even when the five necessary conditions for plant growth—atmosphere, water, light, soil, and temperature—are met, it has a structure that suppresses the growth of weeds on its own. Additionally, it is the only road concrete secondary product recognized as an environmental technology and product by leading universities, research institutions, and many experts in the fields of land and environment in Japan. It is used in boundary blocks for pedestrian and vehicle areas, as well as L-shaped ditches. 【Features】 ■ Reduces approximately 2.3 tons of CO2 per 1000 meters generated from grass cutting. (Calculated from NETIS new technology registration [conventional weed control construction] labor costs) ■ Eliminates the need for products, technologies, pesticides, and repellents aimed at weed control, ensuring safety for people and the environment. ■ The weed control effect continues even if the joints of the paving material separate (confirmed through empirical research including construction monitoring). ■ Conventional weed control measures and products become unnecessary, reducing the burden on people, time, and budget.

  • Secondary paving products
  • Paving of sidewalks, roads, parking lots and stadiums
  • Road construction
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Collection pipe "Vent Trap Collection Pipe"

Collection pipe "Vent Trap Collection Pipe"

Drainage pipe for landslide prevention! Collection efficiency = water volume × collection capacity × water flow capacity!

The "Vent Trap Collection Pipe" is a collection pipe designed for landslide countermeasures, devised to improve the efficiency of groundwater drainage work (water drainage boring). The slit width in the collection pipe is 1/10 compared to conventional pipes, making it difficult for water to escape from the inside to the outside due to its "Vent Trap Structure," which enhances and balances both collection capacity and water flow capacity, resulting in a high-efficiency collection pipe. 【Features】 ■ The opening has a 0.5mm slit to prevent the intrusion of foreign objects. ■ Collection and drainage efficiency is significantly improved. ■ Improved workability due to screw joints. * Reduces the upward movement during casing extraction. * For more details, please download the PDF or feel free to contact us.

  • Piping materials (plastic pipes)
  • Piping materials (copper pipes, cast iron pipes)
  • Piping materials (concrete pipes)
  • Construction method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Construction method

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.