[Exhibition Announcement] We will be showcasing the simple type water stop board "Flood Guar F" at the 3rd Xiamen Disaster Prevention, Mitigation, and Emergency Rescue Technology Equipment Exhibition.

Easily installable compared to general sandbags and water-absorbent sandbags. A simple type of water stop board to prevent flooding under the floor.

In recent years, flooding damage due to guerrilla rainstorms and typhoons has been increasing nationwide. In particular, flooding under floors accounts for about 60% of flood damage cases. Traditional sandbags take time to prepare, and it is difficult for women and the elderly to prepare, transport, and install them. On the other hand, 'Flood Guard F' is extremely lightweight and easy to transport and install. Made of ABS resin, it has strong durability, can be resized according to the location of use, can be compactly stored when not in use, and is compatible with the 3R principles. 【Performance Comparison (Partial)】 <Speed> ■Flood Guard F: Can demonstrate its capability just by placing it, excellent for initial response ■Typical sandbags: Require the labor of filling with soil ■Water-absorbing sandbags: Require the task of soaking up water *For more details, please refer to the PDF materials or feel free to contact us.

• Water stop

Lightweight and sturdy ABS material. Can be installed quickly and easily, providing excellent water-stopping effect.

"Flood Guard F" is a simple water barrier designed to prevent flooding caused by typhoons and sudden heavy rain. Made of lightweight and high-strength ABS, it can be installed quickly and is effective in emergencies. When not in use, it can be stacked for space-saving storage. 【Features】 ■ Two types: Maximum water stop height of 50cm for the "F50 series" and 80cm for the "F80 series" ■ Curved types "FN50/80・FW50/80" can be installed on curves ■ "FT50/80" allows adjustment of the length from end to end for the best fit ■ "Double water stop" prevents leaks from the early stages of flooding ■ "Fitting bar" fills the gap between the wall and the water barrier ■ "Catch clip" reduces leaks and makes it easy to connect multiple units *Catalogs and case studies are available for download as a PDF. Please feel free to contact us for inquiries.

• Water stop

Next-generation water-stopping board to replace sandbags!

The Flood Guard F80 is a type of simple water barrier that can be connected and installed according to the location. The F80 is self-supporting and does not require installation rail construction, making it very economical. The main product, the FZ80, is made of ABS resin and weighs about 8 kg, which is approximately 60% lighter than a bag of sand, allowing installation by women and the elderly. It has a maximum water stop height of 81 cm, making it suitable for floor flooding. The basic structure shares features with the F50 and offers water stop capabilities and durability that far exceed that of sandbags.

• Water stop

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. Used for fine adjustments of the installation width.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from typhoons and sudden heavy rains, which have been on the rise in recent years. By installing a sponge and water stop rubber, it significantly reduces leakage. Thanks to its slide structure, the external width can be adjusted within the range of 560 to 705 mm. ■FT50 Weight (kg): 6.6 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Water stop

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. Integrated with the main water stop board, dramatically reducing water leakage damage.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from the increasing trends of typhoons and sudden heavy rains in recent years. By installing sponge and water stop rubber, it significantly reduces leakage. The side seal is a product used in combination with "Flood Guard F" to further reduce leakage. ■ FS50 Side Seal Weight (kg): 1.5 Maximum waterproof height (cm): 51 Maximum durability water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Water stop

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. Can create a 30-degree angle on the inside with one unit.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from the increasing trends of typhoons and sudden heavy rains in recent years. By installing sponge and water stop rubber, it significantly reduces water leakage. ■FN50 Weight (kg): 3.7 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Water stop

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. Can be set at an angle of 30 degrees outward with one unit.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from recent trends of typhoons and sudden heavy rains. By installing sponge and water stop rubber, it significantly reduces water leakage. ■FW50 Weight (kg): 3.1 Maximum waterproof height (cm): 51 Maximum durability water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Water stop

"Flood prevention measures against typhoons and guerrilla heavy rain" Easy installation without tools. By overlapping the protruding parts of the two connected units, they can be easily connected straight.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from the increasing trends of typhoons and sudden heavy rains in recent years. By installing sponge and water stop rubber, it significantly reduces leakage. For curved sections, FN (inner curved board) and FW (outer curved board) are used, while for straight gaps, FJ/FJL (gap boards) are utilized, ensuring effective leakage prevention even in complex site shapes, contributing to flood control measures. *For more details, please download the PDF or feel free to contact us.

• Water stop

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. You can use a combination of four different shapes.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from recent trends such as typhoons and sudden heavy rains. By installing sponge and water stop rubber, it significantly reduces water leakage. ■FZ50 Weight (kg): 4.4 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Water stop

Flood prevention measures against typhoons and guerrilla heavy rain. Easy installation without tools. By closely adhering the water stop board to the wall, damage at water-prone areas is reduced.

The new simple water stop board "Flood Guard F" is a product designed to prevent flooding damage from the increasing trends of typhoons and sudden heavy rains in recent years. By installing sponge and water stop rubber, it significantly reduces leakage. ■FG50 R/L Weight (kg): 4.1 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 ■FGL50 R/L Weight (kg): 4.5 Maximum waterproof height (cm): 51 Maximum durable water pressure (kg): 300 *For more details, please download the PDF or feel free to contact us.

• Water stop

Attention composite material designers such as those working with FRP! The theme of the first session of Creo Chapters Webinar Season 3 is "Designing for Composites with 3D CAD Creo." We hope you will join us.

We will introduce solutions for traceability and automation of design and analysis data using Ansys Minerva and PTC's PLM "Windchill." Please feel free to stop by.

PTC will be presenting at the free web seminar "Manufacturing Solutions Fair 2025 Autumn" hosted by Otsuka Shokai. There will be two sessions on DX and AI. Pre-registration required: Deadline is 2 business days before each event date at 13:00. PTC Presentation: 10/21 (Tuesday) 11:00-11:50, 10/23 (Thursday) 16:00-16:40 Please be sure to register.

**Overview** At the "Business Innovation Fair 2025 Autumn in Tsukuba," we are offering luxurious seminars that provide hints for solving the current challenges faced by medium and small enterprises, as well as panel exhibitions from various companies related to AI operations. **Five Exciting Seminars! Learn the Latest IT Trends** We have prepared five themes packed with practical know-how that can be immediately useful, covering everything from daily business improvements to human resources and security. This is a must-see for business owners and representatives looking to promote DX. - What is the difference between companies that can utilize AI and those that cannot in medium and small enterprises? - Improve operations without incurring costs! Start DX with OTSUKA kintone STATION - Maximize the power of Windows 11! Shall we reform business with cloud and connections? - Completely solve challenges related to "human resources" with HR and labor DX! (We will introduce success stories from job applications to talent management) - What is the "Five-Stage Security Measures Evaluation System" announced by the Ministry of Economy, Trade and Industry? (We will explain the preparations for the system's operational start) Source: Business Innovation Fair 2025 Autumn in Tsukuba

Graphisoft Japan Co., Ltd. will hold the online event "Graphisoft IGNITE Japan 2025." This event is the largest online live event hosted by Graphisoft Japan, held once a year, and serves as the announcement for the new version of Graphisoft's flagship BIM software, "Archicad." We have prepared a comprehensive program aimed at revitalizing BIM across the entire industry. We will carefully respond to real-time questions and comments during the Q&A session. We sincerely look forward to your participation.