[Information] Shirutoku Report No. 85 # Power Control Methods and LED Driving

When connecting multiple LEDs, there are several connection methods! Here are the key points to consider!

★★Shirutoku Report: Useful Information You Should Know★★ LED lighting is now used in various places, such as home lighting, streetlights, and display backlights. When using LEDs for lighting, it is often necessary to drive multiple units simultaneously to meet brightness specifications. In such cases, the question arises as to how to combine and connect them in series and parallel. Are you aware of the characteristics that differ based on the connection method? I would like to explain the advantages and disadvantages of LED series and parallel connections. [Contents] ■ Series Connection ■ Parallel Connection ■ Advantages and Disadvantages *For more details, please refer to the PDF document or feel free to contact us.

• others

It is important to consider impedances not shown in the circuit diagram and to collaborate with the customer to address them!

★★Shirutoku Report: Useful Information You Should Know★★ We are engaged in the development of chargers for Li-ion batteries. In addition to the Li-ion battery, the charger is connected to an inverter as part of the entire system, so resistance to the noise voltage generated by these components is required. This time, we will discuss the resistance to noise voltage applied externally to the output terminals of this charger. [Contents] ■ It is also necessary to avoid resonance with noise ■ Confirm characteristics with an impedance analyzer ■ Consideration of impedances not shown in the circuit diagram is also necessary *For more details, please refer to the PDF materials or feel free to contact us.

• others

Caution is needed! It is important to properly address metastability measures during the design phase!

★★Shirutoku Report: Useful Information You Should Know★★ In digital circuits, there are synchronous circuits that are synchronized with a clock and asynchronous circuits that are not. The flip-flops (FF) used in synchronous circuits have timing specifications such as setup time (tSU) and hold time (tH) established as requirements for stable operation between the clock and input signals. This time, we will explain the handling of asynchronous input signals, which require caution in digital circuit design such as FPGA. [Contents] ■ Factors that cause logical circuits to malfunction ■ Measures to prevent impact on circuit operation ■ The number of flip-flops needs to be optimized ■ It is important to thoroughly implement metastability measures during the design phase *For more details, please refer to the PDF materials or feel free to contact us.*

• others

LED lighting can control the amount of light through current! Its characteristic is the ability to achieve a wide range of dimming.

★★Shirutoku Report: Useful Information You Can Benefit From★★ I am engaged in power supply circuit design and encounter a wide variety of power supplies on a daily basis. There are various control methods for power supplies, but the two most commonly seen are: (1) Constant voltage power supplies that control to maintain a constant voltage value (2) Constant current power supplies that control to maintain a constant current value This time, I would like to talk about (2) constant current power supplies. [Contents] ■1. (Pseudo) Constant current driving of LEDs using constant voltage power supplies ■2. Constant current driving of LEDs *For more details, please refer to the PDF document or feel free to contact us.

• others

It is necessary to achieve a stable system that "realizes the required functions" while "not stopping operation"!

★★Shirutoku Report: Useful Information You Should Know★★ There is no need to reiterate the definition of "IoT," as it has already permeated our lives. In the market, there are many inexpensive gadgets available that allow for development simply by connecting to a PC, creating an environment where anyone can easily work on IoT devices as part of summer vacation projects. While IoT devices have become so easy to develop, what challenges arise when it comes to commercialization and productization? We will introduce the essential embedded technologies for IoT development. [Contents] (1) The performance of IoT devices that cannot be achieved by merely combining devices (2) The necessity of energy-saving, utility expansion, and power efficiency for large-scale applications of IoT devices (3) Other challenges that need to be addressed *For more details, please refer to the PDF document or feel free to contact us.

• IoT

In simple terms, it means "You cannot transmit radio waves without obtaining a license as a radio station or acquiring a technical conformity mark!"

★★Shirutoku Report: Useful Information You Should Know★★ Have you ever seen the "Technical Standards Conformity Certification" mark? This mark is granted to products that have received certification known by the abbreviation "Giteki." This time, I would like to talk about the frequently asked questions regarding obtaining Giteki certification. Please take a moment to read it. [Contents] ■ What is Technical Standards Conformity Certification? (What is Giteki?) ■ What is the difference between Giteki and construction design certification? ■ How should I apply for Giteki? ■ What are the benefits of requesting a design company to apply for Giteki? *For more details, please refer to the PDF document or feel free to contact us.

• others

An important issue to be aware of in the development of high-frequency amplifiers is "not to oscillate"!

★★Shirutoku Report: Useful Information You Should Know★★ When it comes to indicators that represent the performance of high-frequency amplifiers, there are output power, gain, efficiency, and so on, and development is progressing to meet the required performance for each. However, aside from these performance metrics, there is an important issue to be aware of in high-frequency amplifier development: "not oscillating." This document explains that addressing oscillation is also crucial in high-frequency amplifier development. Please take a moment to read it. [Contents] ■ Methods to Suppress Gain *For more details, please refer to the PDF document or feel free to contact us.*

• others

With a large-signal model of a transistor, it is possible to design considering large-signal characteristics such as output power and efficiency!

★★Shirutoku Report: Useful Information You Should Know★★ In this document, I would like to discuss the design of high-frequency amplification circuits. High-frequency amplification circuits are composed of amplification elements, matching circuits, and bias circuits. I will explain in order: "Selection of amplification elements," "Design of matching circuits," and "Design of bias circuits." Please take a moment to read it. 【Contents】 ■ Selection of amplification elements ■ Design of matching circuits ■ Design of bias circuits *For more details, please refer to the PDF document or feel free to contact us.

• others

What should I prepare for the application for technical standards conformity certification? Information on necessary application documents, etc.

★★Shirutoku Report: Useful Information You Should Know★★ In this document, we would like to provide detailed information about "Technical Conformity Mark" (Giteki), which has been receiving an increasing number of inquiries. We will explain what is needed for the Giteki application using the Bluetooth (BLE) module application as an example. We also include the benefits of requesting a Giteki application from a design company, so please take a moment to read through it. 【Contents】 ■ What is needed for the Giteki application... ■ What are the benefits of requesting a Giteki application from a design company? *For more details, please refer to the PDF document or feel free to contact us.*

• others

Are you having trouble with sound? Here are some tips for designing high sound quality (low noise).

★★Shirutoku Report: Useful Information You Can Benefit From★★ In this document, I would like to talk about audio design (high sound quality). Recently, we haven't been hearing the term Hi-Fi (high fidelity, high reproducibility) much anymore. Perhaps it's because Wi-Fi has become so common that it has become confusing, and people have stopped using it... Or is it because high-resolution audio has become the term for high sound quality instead of Hi-Fi? 【Contents】 ■ Definition of Good Sound ■ Design Points to Be Careful About *For more details, please refer to the PDF document or feel free to contact us.

• others

I think that understanding the circuit well is important for mastering the circuit simulator!

★★Shirutoku Report: Useful Information You Should Know★★ In the field of high frequency, the use of circuit simulation has become essential for circuit design. This document introduces the utilization of high frequency circuit simulators. We provide explanations using figures such as "Examples of Circuit Simulation Results for Matching Circuits," so please take a moment to read it. [Contents] ■ Examples of Circuit Simulation Results for Matching Circuits, etc. *For more details, please refer to the PDF document or feel free to contact us.

• others

We propose communication standards that suit your needs! Introducing the applications of specific low-power radio (Tokushou) stations, etc.

★★Shirutoku Report: Useful Information You Should Know★★ Do you know about specific low-power radio? It is often referred to as "Tokushou" for short. In this document, we will introduce this topic. We cover "Applications of Specific Low-Power Radio (Tokushou)" as well as "Wireless Communication Circuit Design Services," so please take a moment to read through it. 【Contents】 ■ What is Specific Low-Power Radio (Tokushou)? ■ Various Standards for Specific Low-Power Radio (Tokushou) ■ Introduction to Wireless Communication Circuit Design Services *For more details, please refer to the PDF document or feel free to contact us.*

• others

By verifying the validity of the work from a design perspective, we ensure the quality of the product!

I am engaged in the development and design of mobile communication devices. In this document, I will focus on the "modification" work within that context. "Modification" in the development and design field involves identifying issues from prototype evaluations and incorporating the countermeasures back into the prototype (essentially reworking it). There are points to be cautious about in terms of both the work process and the design aspects during "modification." Please take a moment to read through it. [Contents] ■ Points to note for soldering work ■ Design considerations to be aware of *For more details, please refer to the PDF document or feel free to contact us.

• others

Achieving a flat temperature characteristic by combining negative and positive temperature characteristics!

★★Shirutoku Report: Useful Information You Can Benefit From★★ You may casually use linear regulators and DC-DC converters, but when you turn on the power, they provide the desired output voltage as if it were a matter of course. Have you ever wondered, "Why is that voltage output stable?" In this report, we will introduce the reference voltage sources found within power ICs such as linear regulators and DC-DC converters. Please take a moment to read it. 【Contents】 ■ Discussion on Reference Voltage Sources ■ An Example of a Bandgap Reference Circuit ■ Detailed Explanation *For more details, please refer to the PDF document or feel free to contact us.*

• others

The issue of noise in ADCs and its countermeasures! The key point is to handle it skillfully!

★★Shirutoku Report: Useful Information You Can Benefit From★★ In this report, we will introduce the A/D converter related components mounted on the microcontroller of the control board, which is central to power control. The importance of noise countermeasures for the ADC used in the circuit is extremely high, as any deviation in conversion values due to noise can adversely affect subsequent control. We will discuss the issues related to ADC noise and their countermeasures, so please take a moment to read through it. 【Contents】 ■ (1) About ADCs mounted on microcontrollers ■ (2) Issues with input noise in ADCs ■ (3) Specific examples of noise countermeasures for ADCs *For more details, please refer to the PDF document or feel free to contact us.

• others

The breakers lined up in the distribution board are of different types according to their purposes!

★★Shirutoku Report: Useful Information You Should Know★★ The Power Supply Design Department designs various types of switching power supplies, such as AC-DC converters and DC-AC inverters, and conducts various evaluations and tests specific to power supplies. Among these tests, there are rigorous evaluations known as "abnormal tests," which assess safety during component failures. One of the important devices that protects the evaluation equipment during such harsh tests is the "circuit breaker." Many may be more familiar with the term "breaker." This report will introduce you to these breakers. 【Contents】 ■ Ampere Breaker: Maintains the current value contracted with the power company ■ Leakage Breaker: Protects commercial systems held by households and power companies from accidents ■ Safety Breaker: Maintains the current value for each circuit (each room) *For more details, please refer to the PDF document or feel free to contact us.

• Power distribution and control panels

To keep the lamp lit stably, it is necessary to control the power output according to the condition of the lamp!

★★Shirutoku Report: Useful Information You Should Know★★ This report introduces the features of ballast power control. The ballast power supply refers to a device that stabilizes the discharge state of lamps, which are light sources such as car headlights and LCD projectors. Unlike general power supplies that control with constant voltage or constant current, to keep the lamp lit stably, it is necessary to understand the lighting characteristics of each type of lamp and control the power output according to the lamp's state. 【Contents Included】 ■ Example of lighting characteristics of ultra-high pressure mercury lamps used in LCD projectors ■ Fast control is required ■ Emits light at the necessary brightness ■ Control of the switching operation itself *For more details, please refer to the PDF document or feel free to contact us.

• others

In the manufacturing field, production equipment using the once-popular PC98 from over 20 years ago is still in active use!

★★Shirutoku Report: Useful Information You Can Benefit From★★ This report introduces measures for dealing with equipment failures related to PC98. A customer consulted us about a printer connected to a PC98 used for controlling test equipment that had broken down, resulting in an inability to print data. They were wondering if there was any way to resolve this issue. Our company also responds to measures for dealing with failures and extending the life of aging tools, devices, and equipment surrounding production facilities, so please feel free to consult us if you have any concerns. 【Contents】 ■ Customer Consultation ■ Specific Measures ■ Construction of the Measures System *For more details, please refer to the PDF document or feel free to contact us.*

• Desktop PC
• Other PCs and OA equipment

I will talk about a method to quantitatively verify the magnitude of circuit inductance.

★★Shirutoku Report: Useful Information You Should Know★★ This report introduces methods for quantitatively confirming the magnitude of circuit inductance. When improving the measurement environment for evaluating power semiconductor switching, it is sometimes necessary to reconsider the wiring. However, without a quantitative understanding of the circuit inductance in the measurement system, improvements can be difficult. By using measured circuit inductance values during simulations, results closer to actual measured waveforms can be obtained. 【Contents】 ■ Methods for improving circuit inductance ■ IGBT module measurement circuit examples ■ Methods for confirming circuit inductance *For more details, please refer to the PDF document or feel free to contact us.*

• others

How should switching evaluation be conducted? Explanation using diagrams and photos.

★★Shirutoku Report: Useful Information You Should Know★★ This report introduces the switching evaluation of power semiconductors such as power devices and power modules. The ideal switching operation is a state where there is no delay time in current and voltage when turning ON/OFF, meaning that there is no occurrence of power loss. However, during the switching operation of power devices, some delay time inevitably occurs. Our company has engineers with expertise in switching evaluation, so if you require evaluation of various power devices, please feel free to consult us. 【Contents】 ■ IGBT Module Measurement Circuit Examples ■ IGBT Module Measurement Environment Examples *For more details, please refer to the PDF document or feel free to contact us.

• others

Even parasitic impedance not shown in the circuit diagram can be detected by a professional!

★★Shirutoku Report: Useful Information You Should Know★★ In this report, we will introduce an important invisible element, "impedance," in addition to parasitic components that are not visible on circuit diagrams. Impedance refers to AC resistance and is often specified as 50Ω for single-ended and 100Ω for differential. In high-frequency circuit design, impedance becomes a critical issue. Even parasitic impedance that is not shown in the circuit diagram can be discerned by professionals. If you are interested, please feel free to contact us. 【Contents】 ■ An example of a circuit diagram created with LT-spice *For more details, please refer to the PDF materials or feel free to contact us.*

• others

Our company is capable of simulating the 3D conversion of CAD drawings and structural diagrams, extracting the contributing elements.

★★Shirutoku Report: Useful Information You Should Know★★ This report introduces the ideals and realities of circuit diagrams. Circuit diagrams include electronic components such as capacitors, inductors, transistors, diodes, and resistors, which are treated as ideal elements. However, in real circuits, there are not only these elements but also parasitic components such as capacitive, inductive, and resistive elements, which can cause various adverse effects and hinder the intended operation of the designer. Our company has many engineers who are well-versed in parasitic components and can perform circuit design, so if you are interested, please feel free to contact us. [Contents] ■ Parasitic Capacitance ■ Parasitic Inductance ■ Parasitic Resistance *For more details, please refer to the PDF document or feel free to contact us.

• others

An insulated circuit that requires careful attention for noise countermeasures. Here is an example of a method to stabilize the ground.

★★Shirutoku Report: Useful Information You Should Know★★ This report introduces the requirements for insulation and measures against noise. In electrical circuits, insulation may be used to avoid safety issues such as electric shock and to prevent unexpected current destruction. Common items we handle include communication interfaces like LAN and insulated power supplies. It is common to use optocouplers or transformers for the transmission of signals and power across insulated sections. If you are having trouble with noise measures, please feel free to contact us. 【Contents】 ■ Insulation and Noise Measures *For more details, please refer to the PDF document or feel free to contact us.*

• Parts and Materials

Supports testing according to various standards such as certification. We will introduce the main evaluation and testing items for switching power supplies and their implementation details.

★★Shirutoku Report: Useful Information You Should Know★★ This report introduces the electrical evaluation related to switching power supplies. The evaluation of power circuits features a lot of content that confirms whether they can operate safely (i.e., whether there are any hazards). There are also specific aspects that may be unfamiliar to those not involved in power supply design or evaluation, so I would like to take this opportunity to explain them. 【Contents】 ■Electrical Characteristics Evaluation ■Component Rating Confirmation ■Abnormal Testing ■Temperature Rise Testing ■Immunity Testing ■Reliability Testing *For more details, please refer to the PDF document or feel free to contact us.

• others

I created a custom project using samples with the goal of illuminating the lights. Here is an introduction to the screen display and button operation.

★★Shirutoku Report: Useful Information You Can Benefit From★★ This report is a continuation of the discussion on controlling illumination with Arduino from Shirutoku Report No. 58, and this time we have incorporated screen display and button operation. We will explain the LCD display method and button operation method with actual photos. Our company undertakes the development of various embedded devices and IoT devices using a variety of microcontrollers. If you have any inquiries, please feel free to contact us. [Contents] ■ LCD Display Method ■ Button Operation Method *For more details, please refer to the PDF document or feel free to contact us.

• System lighting and lighting control

For those who have grown tired of the same lighting patterns every year, we introduce illumination control using Arduino.

★★Shirutoku Report: Useful Information You Can Benefit From★★ This report introduces illumination control using Arduino. For those who want to "add or change their favorite lighting patterns," we present examples of DIY projects using microcontrollers and modules with simple and convenient features. Please take a moment to read it. 【Contents】 ■ Equipment Used ■ Procedure *For more details, please refer to the PDF document or feel free to contact us.*

• System lighting and lighting control

Why is it called "distribution constant," and what is being distributed? An introduction to distribution constant circuits.

★★Shirutoku Report: Useful Information You Should Know★★ This report introduces distributed constant circuits. We will explain distributed constant circuits, where the distances and dimensions of wiring and components are finite, and the signal transmission time is also finite, as well as concentrated constant circuits, which are the opposite concept where the distance of wiring is zero, using diagrams. Please take a moment to read it. 【Contents】 ■ Concentrated Constant Circuits ■ Distributed Constant Circuits *For more details, please refer to the PDF document or feel free to contact us.*

• others

Introducing circuit verification using 'SPICE' as a countermeasure for problems arising from changes in the characteristics of components.

★★Shirutoku Report: Useful Information You Should Know★★ This report focuses on circuit verification using "SPICE," which allows for various validations. Using a filter as an example, we will present a verification designed to reduce the number of components by modifying the configuration, ensuring that the attenuation characteristics match at 10MHz, illustrated with diagrams. Our company also conducts validity checks of designs through simulations based on customer requests. We encourage you to read on. 【Contents】 ■ Examples of circuit verification using SPICE ■ One-point advice ■ Meaning of commands *For more details, please refer to the PDF document or feel free to contact us.*

• others

The communication device accesses the power company's server to obtain information! Introducing the mechanism and evaluation of the output control function.

★★Shirutoku Report: Useful Information You Should Know★★ In recent years, the rapid increase in solar power generation has disrupted the balance between supply and demand, raising concerns that supply (generation) may exceed demand. This report covers the output control function. When electricity supply is expected to exceed demand, power companies need to reduce the generation of renewable energy. 【Contents】 ■ What is the output control function? ■ Mechanism of the output control function - Information is registered on servers owned by each power company - Communication devices access the power company's server to obtain information - Information is sent to the power converter for control ■ Evaluation of the output control function *For more details, please refer to the PDF document or feel free to contact us.*

• Other power generation
• Other services and technologies

The power converter, which plays the role of bridging electricity, is the key to the system! Introducing the battery-compatible system.

★★Shiruto Report: Useful Information You Can Benefit From★★ This report introduces systems compatible with storage batteries. Using solar power generation as an example, we explain the combinations of system operations over the course of a day. By setting the operating modes for each product, we can explore various conditions under which the storage battery charges/discharges, whether it operates when buying (selling) from the grid, and more. 【Contents】 ■ Storage Battery Compatible Systems ・Nighttime ・Morning (Evening) ・Daytime *For more details, please refer to the PDF document or feel free to contact us.

• Other services and technologies

Explanation using diagrams such as the transient thermal resistance of devices! Calculations will be performed using a MOSFET with appropriate parameters as an example.

★★Shirutoku Report: Useful Information You Can Benefit From★★ This report is a continuation of the discussion on the avalanche rating tests of MOSFETs mentioned in Shirutoku Report No. 52. It explains the relationship between the transient thermal resistance of the device and the loss and time during avalanche operation using diagrams and graphs. When selecting a device, it is not very meaningful to compare devices measured under different conditions. It is recommended to measure in an environment as close to actual operation as possible, rather than relying solely on data sheet values. 【Contents】 ■ Transient thermal resistance of the device ■ Relationship between loss and time during avalanche operation ■ Graph of Tj and time *For more details, please refer to the PDF document or feel free to contact us.

• Other services and technologies

Avalanche breakdown, UIS test circuit and waveforms, etc.! Explanation of avalanche rating tests for power MOSFETs.

★★Shirutoku Report: Useful Information You Should Know★★ The avalanche rating measured in avalanche testing refers to the amount of energy that a power device can withstand before it begins to conduct current rapidly and ultimately fails when a voltage exceeding its breakdown voltage is applied. This report explains avalanche breakdown and UIS test circuits and waveforms using diagrams. To verify whether there are any issues in the event that the device enters avalanche mode, it is necessary to investigate the avalanche rating of power MOSFETs when designing power electronics circuits. [Contents] ■ Image of avalanche breakdown ■ Test circuit and waveform for measuring avalanche rating *For more details, please refer to the PDF document or feel free to contact us.

• Other services and technologies

Correct knowledge of phase is essential for power supply design! Here is an example that enhances circuit operation stability.

★★Shirutoku Report: Useful Information You Should Know★★ Phase compensation in power circuits refers to the technology that controls the phase shifts caused by the numerous capacitors (C) and inductors (L) implemented on the power supply board, ensuring stable operation of the circuit. In this report, we will introduce examples of voltage and current phases, as well as the transfer function of feedback circuits, using diagrams. If the phase remains shifted, the control to lower the output voltage may conversely be transmitted, potentially causing the output voltage to rise indefinitely and lead to oscillation. We encourage you to read on. 【Contents (Excerpt)】 ■ Voltage and Current Phases ■ An Example of the Transfer Function of Feedback Circuits ■ Stability Confirmation Using Board Wiring ■ Changes in Board Bode Plots with Phase Compensation *For more details, please refer to the PDF document or feel free to contact us.*

• Other services and technologies

Introduction to the evaluation of power converter performance, including certification testing of developed products and performance evaluation of products!

★★Shirutoku Report: Useful Information You Should Know★★ A power conditioner (power con) is an inverter device that converts renewable energy, such as solar power, into commercial alternating current used in homes. This report includes evaluations of certification tests for developed products, performance evaluations of products, and system tests of products related to power con evaluation. Additionally, we also introduce the "lightning surge test," which applies a voltage equivalent to lightning to confirm durability. We encourage you to read it. 【Contents】 ■ Certification test evaluation of developed products ■ Performance evaluation of products ■ System tests of products ■ Information on lightning surge tests *For more details, please refer to the PDF document or feel free to contact us.

• Lightning protection
• Other services and technologies

Explanation on how to reduce output variation in circuits with characteristic variability!

★★Shirutoku Report: Useful Information You Should Know★★ Feedback refers to the process of "returning" or "reverting," where output is fed back to the input side to control the output in accordance with the target. This report explains feedback control, which is closely related to power circuits, and open-loop control. Power circuits can experience significant changes in characteristics when various external loads are connected or when the input voltage fluctuates greatly, making feedback control very important. [Contents] ■ Open-loop Control ■ Feedback Control *For more details, please refer to the PDF document or feel free to contact us.*

• Other services and technologies

Introducing circuit diagrams and features of isolated switching power supplies, such as forward and flyback methods!

★★Useful Information Report: Knowledge is Beneficial★★ This report introduces representative methods of isolated switching power supplies that use transformers among the circuit configurations of switching power supplies. It includes circuit diagrams and features of the Forward method, Flyback method, Push-Pull method, and Full Bridge method. Please take a moment to read it. [Contents] ■ Forward Method ■ Flyback Method ■ Push-Pull Method ■ Full Bridge Method *For more details, please refer to the PDF document or feel free to contact us.

• Other services and technologies

Selection of ICs with Ioff functionality is necessary! Explanation of support for external interfaces, etc.

★★Shirutoku Report: Useful Information You Should Know★★ This report explains the important Ioff function during partial power down. "Partial" means "some" or "partial," and partial power down refers to a state where power is turned off partially. During partial power down, it is necessary to be cautious during design, as there will be a mix of circuit blocks that are powered on and those that are powered off. 【Contents】 ■ Precautions during partial power down ■ Support for partial power down in external interfaces ■ Pull-up resistors *For more details, please refer to the PDF document or feel free to contact us.

• Other services and technologies

If you understand phase compensation, you won't be afraid of power supply oscillation! An explanation of power supply performance.

★★Shirutoku Report: Useful Information You Should Know★★ When evaluating power supplies, you may have experienced "oscillation at low temperatures!" In such cases, it is necessary to diagnose the frequency characteristics of the power supply more quantitatively and implement countermeasures. This report explains the performance of power supplies using diagrams and graphs, without using mathematical formulas, to provide a conceptual understanding. We encourage you to read it. [Contents] ■ Negative Feedback Circuit ■ Bode Plot (Gain Plot, Phase Plot) *For more details, please refer to the PDF document or feel free to contact us.*

• Other services and technologies

Whether it's a microcontroller or an FPGA, we will introduce the key points of system design!

★★Shirutoku Report: Useful Information You Should Know★★ When developing a new product, many people have likely experienced the dilemma of whether to use a microcontroller or an FPGA for processing. Additionally, a common conversation is whether to process with software or hardware. In this report, we will discuss the key points of system design. For more details, please take a moment to read through it. [Contents] ■ Efficiency in System Design ■ Image of Processing Speed *For more information, please refer to the PDF document or feel free to contact us.*

• Other Software

Developing with a focus on reliability/quality! Here are some key points for creating embedded software.

★★Shirutoku Report: Useful Information You Can Benefit From★★ In this report, we will discuss the key points when creating embedded software (firmware), specifically about ensuring real-time performance: "Creating it to flow continuously." At WTI, we receive numerous requests for embedded software development from our customers, and we develop with a focus on reliability and quality, including the principle of "flowing continuously." If you are having trouble with software development, please contact WTI. [Contents] ■ Busy Signal ■ Sequential Operation ■ Post-Change Flow *For more details, please refer to the PDF document or feel free to contact us.

• Other Software

Please try to utilize interrupt functions to create embedded software that is "always flowing"!

★★Shirutoku Report: Useful Information You Can Benefit From★★ The Software Design Department creates a lot of embedded software to control dedicated circuit boards. In this report, I will discuss the key points to consider when creating embedded software. The key point when creating embedded software is to ensure real-time performance: "Create it to flow continuously." For more details, please take a moment to read through it. [Contents] ■ Key Points When Creating Embedded Software *For more information, please refer to the PDF document or feel free to contact us.*

• Other Software

High efficiency and miniaturization are possible! Designing switching power supplies requires expertise.

★★Shirutoku Report: Useful Information You Should Know★★ The power supply circuits handled by the Power Supply Design Department come in various circuit configurations, but they can largely be classified as switching power supplies. In this report, we will discuss the characteristics of switching power supplies. For more details, please take a moment to read through it. 【Contents】 ■ Advantages ■ Disadvantages *For more information, please refer to the PDF document or feel free to contact us.*

• others

If you are having trouble with heat, such as retrofitting heat measures or additional heat measures, please feel free to contact us!

★★Shirutoku Report: Useful Information You Can Benefit From★★ We mainly engage in the design of enclosures for outdoor products. Through this work, we often hear customers say, "It's hot, what should I do?" In this report, we will answer what to do in such cases. For more details, please take a moment to read. 【Contents】 ■The answer is "Just cool it down." *For more information, please refer to the PDF document or feel free to contact us.*

• others

Achieving longer battery life and miniaturization! Introducing the development of IoT devices equipped with wireless modules.

★★Shirutoku Report: Useful Information You Should Know★★ Creating IoT devices with wireless communication capabilities from scratch presents several technically challenging issues. As a means to more easily achieve wireless communication functionality, one option is to mount a wireless module onto a circuit board. In this report, we will introduce wireless modules. For more details, please take a moment to read through it. [Contents] ■ What is a Wireless Module *For more information, please refer to the PDF document or feel free to contact us.*

• Other Software
• IoT

Customization suitable for the measurement environment is also available! Introducing the automatic measurement system with curve tracer.

★★Shirutoku Report: Useful Information You Should Know★★ What kind of measuring instruments do you use when evaluating the electrical characteristics of semiconductors like MOSFETs and bipolar transistors? While there are dedicated testers, curve tracers that allow for easy evaluation are also convenient, right? However, when using a curve tracer, have you ever thought, "There are so many evaluation items, it's a hassle to operate manually..." or "There are so many evaluations, it would be great if it could be operated more easily..."? If these needs can be met, you would be freed from the enormous evaluation time. Therefore, we would like to introduce the 'Automatic Measurement System for Curve Tracers.' For more details, please take a moment to read on. [Contents] ■ Automatic Measurement System for Curve Tracers *For more information, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• Measurement and Inspection

Introducing the analysis of rubber products! Please feel free to consult us if you have any issues with structural design or analysis.

★★Shirutoku Report: Useful Information You Should Know★★ In the Structural Design Department, our main tasks include "structural design of metal and plastic enclosures using CAD" and "front-loading development using thermal fluid simulation/structural simulation technologies." *There are various names for this, including structural analysis, structural CAE, stress analysis, and FEM analysis.* In this report, we will briefly introduce our efforts in structural simulation, followed by a discussion on the analysis of rubber products (which play a role in waterproof design, among others). For more details, please take a moment to read through it. [Contents] ■ Efforts in Structural Simulation ■ Analysis of Rubber Products (which play a role in waterproof design, among others) *For more information, please refer to the PDF document or feel free to contact us.*

• Scientific Calculation and Simulation Software
• Measurement and Inspection

It is relatively easy to build a system! We will introduce examples of the adoption of microcurrent detection systems.

★★Shirutoku Report: Useful Information You Can Benefit From★★ The "Custom Measurement Service" is a service that provides the functions required in your research and development environment in the form of a tailor-made "Custom Measurement System." Are you thinking, "But a tailor-made solution seems too high-end..."? At WTI, we can relatively easily build a system by combining it with existing equipment in collaboration with partner companies. In this report, we will introduce this service based on case studies. Please take a moment to read for more details. [Contents] ■ Case Study: Partner Company A *For more details, please refer to the PDF document or feel free to contact us.*

• Measurement and Inspection
• Other services and technologies

A convenient data analysis tool that anyone can use, takes no time, and has no mistakes!

★★Shirutoku Report: Useful Information You Can Benefit From★★ How do you compile reports from data collected from various measuring instruments during evaluation analysis? Many of you might be manually and patiently rearranging data or creating graphs. When the volume becomes enormous, it can take a lot of time and be very inefficient. If there are mistakes, you might have to start all over again. It would be great to have something that anyone can use, doesn’t take much time, and doesn’t lead to errors. That’s why we want to introduce our company’s 'Data Analysis Tool.' For more details, please take a moment to read on. [Contents] ■ Data Analysis Tool provided by Wave Technology *For more information, please refer to the PDF materials or feel free to contact us.*

• Other measuring instruments
• Other analytical equipment

Could a substitute capacitor cause performance issues? Please contact us if you have trouble with EOL.

★★Shirutoku Report: Useful Information You Can Benefit From★★ I mainly design matching circuits for high-frequency power amplifiers used in commercial radio equipment. In this report, I will share my experiences regarding the discontinuation of capacitors (EOL: End Of Life). For more details, please take a moment to read through it. [Contents] ■ Recent EOL Situation ■ Alternative Capacitors May Cause Performance Issues!? *For more information, please refer to the PDF document or feel free to contact us.*

• others

A simple explanation using a MOSFET as an example! Introducing power cycle testing to evaluate durability.

★★Shirutoku Report: Useful Information You Should Know★★ Suddenly, do you all know about "reliability testing"? In brief, it is a collective term for various tests that evaluate the reliability (performance, durability, safety, failure rate, etc.) of a product. The main objectives are to confirm whether the performance meets the design specifications and to assess whether it meets market quality requirements. In this report, we will introduce one of the durability tests for power devices, known as the "power cycle test." For more details, please take a moment to read on. 【Contents】 ■ Short Power Cycle Test (Reference: JEITA-ED-4701/601 602) ■ Long Power Cycle Test (Reference: JEITA-ED-4701/603) *For more information, please refer to the PDF document or feel free to contact us.

• Other services and technologies

Explaining the basics of sensor control! If you're considering automating measurements, please give it a try at least once.

★★Shirutoku Report: Useful Information You Should Know★★ When you want to "check characteristics while changing a certain parameter," "automatic measurement" is very convenient. In this report, I would like to briefly explain how to perform "instrument control" necessary for automatic measurement. For more details, please be sure to read on. 【Contents】 ■ Automatic Measurement / Step 1: Connect PC and Instrument ■ Automatic Measurement / Step 2: Prepare Control Library ■ Automatic Measurement / Step 3: Send Commands to Control the Instrument ■ Common Commands *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

Create the rules with an R-Table and generate the predicted values of state-action pairs with a Q-Table! Introducing the Q-Learning algorithm.

★★Shirutoku Report: Useful Information You Can Benefit From★★ The most challenging aspect I encountered while developing programs was the implementation of algorithms. There are many interesting algorithms, and recently I had the opportunity to explore Q-Learning, which is a type of reinforcement learning related to machine learning. I created a program (Cheese Puzzle Simulator) to demonstrate it. Q-Learning is one of the algorithms in reinforcement learning and is utilized in various fields, from autonomous driving to fintech. In this report, I would like to briefly introduce the Q-Learning algorithm. For more details, please feel free to read on. 【Contents】 ■Challenges ■Explanations *For more information, please refer to the PDF document or feel free to contact us.*

• Other Software
• others

The thermal stress caused by temperature changes is greater than expected! It is important to consider expansion and contraction in design.

★★Shirutoku Report: Useful Information You Should Know★★ In daily life, we don't often think about it, but when the temperature of an object changes, thermal expansion and contraction occur. The magnitude of this expansion and contraction varies depending on the properties of each material (coefficient of linear expansion). In this report, we will discuss the thermal stress that arises from this thermal expansion and contraction. For more details, please take a moment to read through it. 【Contents】 ■ Simple thermal warping calculation tool for laminated boards *For more information, please refer to the PDF document or feel free to contact us.*

• others

Essential thermal resistance of semiconductors for thermal analysis! Introducing typical thermal resistances and their formulas.

★★Shirutoku Report: Useful Information You Should Know★★ In recent years, while products have been miniaturizing, thermal issues have continued to worsen, and we have seen an increasing trend in inquiries from customers regarding thermal analysis. The inquiries cover a variety of topics, but in this report, we will briefly explain the thermal resistance of semiconductors, which is essential for thermal analysis. For more details, please take a moment to read through it. 【Contents】 ■Typical thermal resistances and their formulas *For more information, please refer to the PDF document or feel free to contact us.*

• others

Implemented using a measurement method called feedback method! Introducing the basic circuit for measuring microcurrents.

★★Shirutoku Report: Useful Information You Should Know★★ This report introduces the examination of microcurrent measuring devices. Previously, I created a microcurrent measuring device for work. There are various methods for measuring microcurrents, but the method used this time is called the "feedback method." I will explain the basic circuit of this method. For more details, please be sure to read on. 【Contents】 ■ Target performance of microcurrent measuring devices ■ Basic principles of microcurrent measurement ■ Determining the measurement range ■ Selection of OP amplifiers ■ Phase compensation capacitors ■ Conclusion *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

Explaining the points to note for multi-channel automatic measurement! Using a switch expands the range of automatic measurement!

★★Shirutoku Report: Useful Information You Should Know★★ This report introduces the multi-channelization of automatic measurement. "Multi-channelization" refers to the process of enabling a measurement device that originally has only one channel to measure multiple points with a single trigger by continuing the switch circuit. With multi-channelization, challenges such as "wanting to automatically measure a large number of samples at once" and "unable to perform automatic measurement due to the need to switch connections" can be resolved. For more details, please take a moment to read through it. 【Contents】 ■ Multi-channelization of automatic measurement ■ Principles of multi-channel automatic measurement ■ Points to note for multi-channel automatic measurement ■ Conclusion *For more information, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

Improved design quality of the circuit board! Published the design rule setting items for circuit board design!

★★Useful Information Report: Knowledge is Gained★★ This report introduces DRC. DRC stands for Design Rule Check, which is a function of PCB CAD that verifies whether the design adheres to the specified design rules and can automatically detect violations of those rules. The advent of PCB CAD has reduced labor costs and improved the quality of PCB design. While DRC is very convenient, it is crucial to correctly set the design rules for the PCB CAD to accurately identify rule violations. For more details, please take a moment to read further. 【Contents】 ■About DRC - Items for setting design rules in PCB design *For more information, please refer to the PDF document or feel free to contact us.

• Drawing, tracing, CAD

Consideration to meet product specifications! Examples of component layout considering electrical characteristics are included!

★★Shirutoku Report: Useful Information You Should Know★★ This report introduces considerations for component placement. It is rare to use a circuit board in isolation; it is more common to house it in a case or connect it to other devices. In component placement considerations, we first position components that cannot be structurally moved, such as connectors and switches. For other components, we proceed with the placement while paying attention to structural placement constraints (height limitations of components, areas where placement and wiring are prohibited). For more details, please take a moment to read through. 【Contents】 ■ Considerations for structural component placement constraints ■ Placement considerations taking electrical characteristics into account ■ Wiring considerations *For more information, please refer to the PDF document or feel free to contact us.

• others

Automatic control with control programs! We are presenting the benefits of automatic control of measurement devices.

★★Shirutoku Report: Useful Information You Can Benefit From★★ In this report, we would like to introduce the automatic control of measurement devices related to optical devices. To confirm the functionality of optical devices, multiple characteristics such as optical output, light sensitivity, and frequency characteristics are measured and evaluated. To evaluate these characteristics, a variety of measurement devices are used, including DC power supplies, temperature controllers, and optical component analyzers. For more details, please be sure to read on. 【Contents】 ■Automatic Control of Measurement Devices 　・Benefits of Automatically Controlling Measurement Devices *For more information, please refer to the PDF document or feel free to contact us.*

• Automatic Control Equipment
• IT Control and Services

A structure in which electrodes are provided on the substrate, solder balls are formed on top, and are joined to the electrodes on the package side!

★★Shirutoku Report: Useful Information You Should Know★★ In this report, we will discuss the analysis methods for "BGA packages." "BGA" stands for "Ball Grid Array," which is a type of package for integrated circuits (ICs). In simple terms, it is a surface mount package that has electrodes (lands) on the substrate, with solder balls formed on top to connect to the electrodes on the package side. For more details, please take a look. 【Contents】 ■ About BGA Packages ■ Dyeing Analysis ■ Cross-Section Polishing *For more information, please refer to the PDF document or feel free to contact us.*

• others

Particularly frequent requests! Circuit board design for small, high-density implementations used in IoT devices and wearable devices!

★★Shirutoku Report: Useful Information You Should Know★★ In WTI's circuit board design, we handle various types of board designs, including large-scale circuit boards, multilayer wiring boards, high-density mounting boards, and flexible printed circuits (FPC). One of the most requested designs is for small, high-density mounting boards used in IoT devices and wearable devices. To reduce the size of products and lower board costs, it is common to adopt BGA packages for microcontrollers and FPGAs. This report discusses 'BGA Board Design.' We encourage you to read it. [Contents] ■ About BGA Board Design *For more details, please refer to the PDF document or feel free to contact us.*

• Electrical Equipment Testing
• Facility Design

Introducing common questions regarding screw structures in waterproof design and points to consider during their examination!

★★Shirutoku Report: Useful Information You Should Know★★ When designing for waterproofing, many people tend to focus solely on the gasket parts of the housing. In fact, the screw areas require even more attention than the main waterproof sections. This report discusses the screw structures in waterproof design and points to consider during their examination, addressing frequently asked questions. Please take a moment to read it. 【Contents】 ■ Services we have received inquiries about ■ Frequently asked questions - What specifications should be applied for waterproof screws? - What is the most important point to be cautious about when using waterproof screws? *For more details, please refer to the PDF document or feel free to contact us.

• Waterproofing work
• Facility Design

We are collaborating to solve our customers' problems by utilizing FPGAs!

★★Shirutoku Report: Useful Information You Can Benefit From★★ In this report, we will focus on addressing the discontinuation of parts using "FPGA." This is not about replacing the parts themselves with "FPGA," but rather introducing designs that implement measures for the discontinuation of LCD panel production using "FPGA." If you need designs such as "I want to perform data processing for high-speed serial communication with FPGA" or "I want to process signals from sensors with FPGA and transfer data," please feel free to contact us. 【Contents】 ■ Solutions with "FPGA"! *For more details, please refer to the PDF document or feel free to contact us.*

• Power distribution and control panels
• IT Control and Services

It is also possible to reduce high manufacturing initial costs! Here are some tips for reducing the cost of printed circuit boards.

★★Shirutoku Report: Useful Information You Should Know★★ Printed circuit boards are relatively expensive components among electronic devices, and depending on the quality of the design, the use of the board may change, which can affect costs. You may search for inexpensive board manufacturers overseas and consider adopting them, but the factors that have a significant impact on the cost of printed circuit boards are "board structure/layer count" and "board size." In this report, we will introduce tips for reducing costs, focusing on "board size." [Contents] ■ Tips for Cost Reduction on Board Size *For more details, please refer to the PDF document or feel free to contact us.*

• Parts and Materials

Contents to be confirmed in structural evaluation! Explanation of drop tests and waterproof tests.

★★Shirutoku Report: Useful Information You Should Know★★ This report introduces typical evaluations (drop tests, waterproof tests) conducted in the development and design of mobile communication devices. The drop test is the first test performed to confirm the strength of the casing. The waterproof test is based on protection ratings defined by IEC (International Electrotechnical Commission) and JIS (Japanese Industrial Standards), and it is necessary to select a testing method that suits the product's purpose. In terms of structural evaluation, there are other tests such as pressure tests and key press tests, and WTI is capable of handling various tests. If you have any inquiries about what can be done, please feel free to reach out to us. [Contents] ■ Drop Test ■ Waterproof Test *For more details, please refer to the PDF document or feel free to contact us.

• others

A suitable structural examination is necessary due to the mounted components and wiring density! An explanation of the structure of the substrate.

★★Shirutoku Report: Useful Information You Should Know★★ This report introduces the "Structure of Circuit Boards." It includes topics such as "Classification by Board Structure," "Conductor Materials and Solder Resist," and "The Importance of Initial Considerations in Board Structure." Our company is also capable of supporting circuit board design from initial considerations, including board structure. Please feel free to reach out if you need assistance. 【Contents】 ■ Classification by Board Structure ■ Conductor Materials and Solder Resist ■ The Importance of Initial Considerations in Board Structure ■ About Flexible Circuit Boards *For more details, please refer to the PDF document or feel free to contact us.*

• Parts and Materials

Introducing programming using OTA with ESP32 via Wi-Fi!

★★Shirutoku Report: Useful Information You Should Know★★ The ESP32 is a microcontroller that incorporates Wi-Fi and Bluetooth, manufactured by Espressif Systems, a wireless chip maker based in Shanghai. OTA stands for Over The Air, which allows programming to be written via wireless networks such as Wi-Fi, mobile data communication, and Bluetooth. In this report, we attempted programming using OTA with the ESP32 microcontroller, and we will introduce the details of that experience. 【Contents】 ■ What is ESP32 ■ What is OTA ■ Boards Used ■ Writing the Program *For more details, please refer to the PDF document or feel free to contact us.*

• System lighting and lighting control
• others

It's important to be aware of thermal issues from the early stages of design! Introducing preventive diagnostics for thermal problems.

★★Shirutoku Report: Useful Information You Can Benefit From★★ The performance requirements for developed products are increasing year by year, leading to a more challenging thermal environment due to the need for thinner and smaller products and the addition of circuit functions (such as communication functions), which increase heat sources. In response, our company has decided to offer a service that identifies the presence of thermal issues and the difficulty of thermal design early in the design phase (thermal issue preventive diagnosis). This report explains "Product Performance Requirements and Thermal Issues" and "Contents of Thermal Issue Preventive Diagnosis." [Contents] ■ About Thermal Simulation ■ Product Performance Requirements and Thermal Issues ■ Contents of Thermal Issue Preventive Diagnosis *For more details, please refer to the PDF document or feel free to contact us.

• others

"What is V2H?" "What can be done with V2H?" Published! An explanation of how to utilize electric vehicles at home.

★★Shirutoku Report: Useful Information You Can Benefit From★★ In recent years, our company has seen an increase in automotive-related business and is involved with V2H, a charging and discharging system for electric vehicles. V2H stands for "Vehicle to Home," which is an abbreviation for a system that allows the battery of an electric vehicle to be used at home. This report will introduce V2H. [Contents] ■ What is V2H? ■ What can you do with V2H? *For more details, please refer to the PDF document or feel free to contact us.

• DC Power Supply
• Batteries and Capacitors

Explanation of the types and uses of substrates! In particular, we will introduce the types of rigid substrates.

★★Shirutoku Report: Useful Information You Should Know★★ The design values and finished values of wiring widths and layer spacing differ depending on the type of circuit board and manufacturing methods (such as subtractive methods, semi-additive methods, etc.). In this report, we will introduce the different types of circuit boards available. Additionally, WTI offers various types of circuit board design and prototyping services. Please feel free to reach out to us. 【Contents】 ■ Types of Circuit Boards and Their Applications *For more details, please refer to the PDF document or feel free to contact us.*

• others

The concept of distributed constant circuits is becoming necessary! An explanation of characteristic impedance and substrate design.

★★Shirutoku Report: Useful Information You Should Know★★ In this report, we will introduce the "characteristic impedance (wiring impedance)" of printed circuit boards. With the recent increase in the speed of digital signals, the design of digital circuit boards now requires the concept of distributed constant circuits rather than lumped constant circuits, making it necessary to consider the characteristic impedance of the board in the design. So, how do we determine the characteristic impedance of a printed circuit board? [Contents] ■ Characteristic Impedance of Printed Circuit Boards *For more details, please refer to the PDF document or feel free to contact us.*

• others

Efficient power supply using SiC devices! A brief introduction to the types and features of diodes.

★★Shirutoku Report: Useful Information You Can Benefit From★★ By switching semiconductor materials from Si to SiC (silicon carbide), the breakdown voltage of Schottky Barrier Diodes (SBD) has improved, making them usable in DC/DC converters for PCS. While using SiC enhances performance, cost issues had previously hindered its adoption. However, in the past year or two, cost challenges have improved, leading to an increase in usage opportunities. This report will briefly explain the types and characteristics of diodes. [Contents] ■ Types and Characteristics of Diodes *For more details, please refer to the PDF document or feel free to contact us.*

• DC Power Supply
• others
• Parts and Materials

Why do optical semiconductors fail? Let me explain a bit more about failures caused by light!

★★Shirutoku Report: Useful Information You Can Benefit From★★ What kind of semiconductor failures come to mind when you think of them? First, you might think of damage caused by static electricity, right? Of course, optical semiconductors can also fail due to static electricity, but they can also fail due to light itself. In this report, we will explain a bit more about failures caused by light. [Contents] ■Failures Caused by Light *For more details, please refer to the PDF document or feel free to contact us.*

• others

How is a metal casing made? A brief introduction to processing methods and design techniques.

★★Shirutoku Report: Useful Information You Should Know★★ Without further ado, I will talk about the metal enclosures I am currently involved in developing. There are various processing methods for creating metal enclosures, and the design techniques change depending on the processing method. This report briefly introduces the representative processing methods and design techniques for metal enclosures. [Contents] ■ Press bending ■ Deep drawing ■ Die casting *For more details, please refer to the PDF document or feel free to contact us.

• others

Key points to consider in power supply design! Here are some points for beginners to keep in mind when designing.

★★Shirutoku Report: Useful Information You Should Know★★ The "power supply" is an essential component in electrical circuits. The "power supply" has functions such as converting voltage levels and transforming alternating current (AC) to direct current (DC). Among these, I would like to talk about the frequently used "DC-DC converter." A "DC-DC converter" is a device that converts direct current into direct current at different voltage levels. While detailed design methods can be referenced in specialized books, this report introduces key points for beginners when designing. 【Contents】 ■ Key Points in Circuit Design *For more details, please refer to the PDF document or feel free to contact us.*

• others

The method is super easy! Just search for Wi-Fi signals and display the obtained data on the screen!

★★Useful Information Report: Knowledge is Power★★ This report introduces a board called M5stack, which is equipped with a Wi-Fi module called "ESP32," along with practical examples of its use. The creation process is super simple: it searches for Wi-Fi signals and displays the acquired data on the screen. That's all there is to it. Please take a moment to read it. 【Contents】 ■How to Make a Simple Wi-Fi Checker ・Recipe *For more details, please refer to the PDF document or feel free to contact us.

• others

If you have any concerns, whether related to new designs or production discontinuation, please feel free to consult with us.

★★Shirutoku Report: Useful Information You Can Benefit From★★ Power supply equipment includes electrolytic capacitors, photo couplers (optical communication devices), relays, and other components that must meet the product's lifespan requirements. There are many methods for verifying lifespan through lifespan calculations and electrical evaluations. This report introduces examples of electrical evaluations. [Contents] ■Electrolytic Capacitors ■Photo Couplers *For more details, please refer to the PDF document or feel free to contact us.*

• others

We respond to various inquiries from customers based on the experience and knowledge gained from previous design and evaluation.

★★Shirutoku Report: Useful Information You Can Benefit From★★ Our company is involved in the development of semiconductor package mounting technology and mounting reliability technology. We mainly focus on packages known as BGA (Ball Grid Array). In this report, we will introduce the daisy chain sample used for evaluating the mounting reliability of semiconductor packages. [Contents] ■ Daisy chain sample for identifying breakage points ■ Daisy chain sample for identifying breakage points - Case studies from customer inquiries *For more details, please refer to the PDF document or feel free to contact us.*

• others

By knowing the composition (types) of substrate data, you can prevent unexpected schedule delays.

★★Shirutoku Report: Useful Information You Should Know★★ This report introduces the composition (types) of circuit board data. We provide a diagram outlining the general flow from circuit board design to manufacturing. Our company can convert Gerber data to our CAD data (CR5000BD) for design purposes when a revision of existing circuit boards is necessary, such as for the development of similar models or for discontinued parts (EOL, discon). If you need designs that utilize existing design assets, please feel free to contact us. 【Main Circuit Board Design CAD (Excerpt)】 ■CR5000BD (Zuken) - Circuit board CAD data file extension: .pcb/.rul - Cover data file extension: .phl/.phd ■CR8000DF (Zuken) - Circuit board CAD data file extension: .dsgn - Cover data file extension: fph/fpl *For more details, please refer to the PDF document or feel free to contact us.

• others

Promote development design! Custom measurement and interface circuits.

★★Shirutoku Report: Useful Information You Can Benefit From★★ This report introduces the use of "interface circuits" that make measurement convenient, which is being developed by the Custom Technology Division. Our company occasionally prepares highly versatile "interface circuits" as originals, and this time we are featuring one of those examples. Proposing solutions to our customers' challenges is a hallmark of our services. If you are interested, we look forward to hearing from you. 【Contents (Excerpt)】 ■ Providing services centered around custom measurement ■ What is an interface circuit? ■ Image of the configuration of an interface circuit (analog isolation circuit board) ■ Production board for the interface circuit (analog isolation circuit board) *For more details, please refer to the PDF document or feel free to contact us.

• others

The grounding (GND) of the antenna is important! Things to be careful about when designing an antenna.

★★Shirutoku Report: Useful Information You Should Know★★ This report introduces the essential "antenna" for communication devices. We describe the characteristics of antennas commonly used in wireless communication devices. Our company provides support services to address improvements in antenna communication distance, so if you have any inquiries or would like to consult with us, please feel free to contact us. 【Contents】 ■ Antennas used in wireless communication devices ■ Grounding (GND) is important for antennas! ■ Be careful with the substrate when using pattern antennas! ■ Check the finish once the substrate is completed! ■ Pay attention to the area around the antenna! ■ Strategies for improving antenna communication distance *For more details, please refer to the PDF document or feel free to contact us.*

• Information and communication equipment and infrastructure

Questions and Solutions! Key Points to Keep in Mind When Developing Waterproof Products

★★Shirutoku Report: Useful Information You Should Know★★ This report introduces the most frequently asked questions from customers regarding the development of waterproof products and their solutions. You may have come across the terms "waterproof specifications IPX5, 6, 7" in various product fields. Waterproof specifications have become a standard feature in smartphones, and as a result, the demand for waterproof functionality is increasingly expected across all consumer products. We provide answers to questions such as "What are the structural differences between waterproof and non-waterproof products?" and "What does the evaluation of waterproof products entail?" along with key points. We encourage you to read it. 【Contents (Excerpt)】 ■Question: What are the structural differences between waterproof and non-waterproof products? ■Question: I want to have a certain level of waterproof performance, but I prioritize design and production costs. In this case, what level of protection rating is achievable? ■Question: What does the evaluation of waterproof products entail? *For more details, please refer to the PDF document or feel free to contact us.

• others

Be cautious of inductance that does not appear in the circuit diagram! A problem unique to the field of power electronics.

★★Shirutoku Report: Useful Information You Should Know★★ This report introduces the circuit operation of power converters. A power converter is a device that converts the direct current (DC) generated by solar panels into alternating current (AC) for commercial power systems. As an example, we have included a configuration diagram that only describes the power circuit using a transformer-less method. Please take a moment to read it. 【Featured Content】 ■ About the circuit operation of power converters - Chopper circuit - Inverter circuit ■ Have you ever experienced issues where the device does not operate even though it was built according to the circuit diagram, or where the switching elements fail immediately? *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Hotron Non-Contact Switch" allows you to open and close doors without directly touching door knobs or switches, making it hygienic! You can choose from two types: the "Hand Wave Sensor," which only requires you to wave your hand, and the "Foot Switch," which only requires you to place your foot at the entrance. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, restaurants, hospitals, and nursing facilities. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ A wide variety of options to choose from based on application and location ○ Ideal for places where hygiene is a priority, such as food factories and medical facilities ○ Prevents unnecessary detection due to the switch mechanism 【Product Lineup】 ■ Hand Wave Sensor Series ○ Exposed waterproof type, front, down, and side-facing types "PF-R5" ○ Exposed type, front-facing type "PF-R1" ○ Embedded type, front-facing type "PF-U2" ○ Exposed type, downward wide type "PF-R4" ■ Foot Switch Series ○ Slim type with wide opening, vertical beam type "PF-01S" ○ Slim type with wide opening, horizontal beam type "PF-03S" ○ Standard type, horizontal beam type "PF-05" ◎ For more details, please download the catalog or contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Hotron's vehicle detection sensors allow you to search for products that meet your needs from three categories: "Purpose of Use," "Location of Use," and "Product List." The sensors detect the passage of vehicles and notify you with a rotating light, or switch the display of parking availability. They manage vehicle presence, full parking, and exit warnings in parking lots, contributing to safe driving and smooth operational management within the parking area. They are used in various settings, from coin-operated parking to large-scale parking lots.

Management College Co., Ltd. will be exhibiting at the "24th [Tokyo] General Affairs, Human Resources, and Accounting Week [Autumn]" held at Makuhari Messe from September 10 (Wednesday) to 12 (Friday) within the "HR EXPO." This time, we will introduce the newly released "Quick Learning Program" from last October at our booth. This is a new training program aimed at new employees from Generation Z, designed to efficiently develop the six essential skills required for business professionals, allowing participants to engage in training actively and enjoyably. We will also present our popular "Management Game MG Training Series," and we sincerely look forward to your visit. [Free Seminar Announcement] Theme: Case Studies of Management Simulation Training in Listed Companies Our Takada will introduce trends in experiential learning and corporate case studies. There will also be special benefits for seminar participants (such as information on special free trial seminars), so we hope you will register for this as well. *The seminar will be held on September 10 (Wednesday) at 15:30 in Seminar Room G within the venue.

Developed for the purpose of improving the safety of sales areas, the SP Bracket-specific anti-fall part (NX-BSP). Simply inserting the bracket activates the internal spring, securing it firmly. It prevents unexpected dislodging, thereby averting product drops and accidents. Moreover, the release is easy and does not compromise workability, making it efficient for layout changes and sales area construction. It achieves a balance between "safety measures" and "work efficiency." An essential part for enhancing the safety of sales areas. Please make use of it for risk management at construction sites.