If you have any questions about "screws," please feel free to consult with us! Whether it's cold forging or other methods, we will propose the optimal cost and products.

We have a proven track record. Nuts that run around the world. Insert nuts that help reduce costs and weight. Non-loosening three-blade nuts that can be used for disaster prevention supplies.

We are widely contributing from automobiles to buildings! [Featured High-Performance Nuts with Proven Results] ■ Bag Nuts (Cap Nuts): Running all over the world! - A wide range of sizes from automobiles to buildings (M3~M36). - The cap at the tip ensures safety and enhances appearance. - The first JIS 3 type cap nut manufactured and sold in Japan. Available in cutting-edge titanium material. ■ High Torque Compatible Insert Nuts (Outsert Nuts): Achieved cost reduction and weight reduction! - Adopted for resin parts in next-generation vehicles (electric vehicles and hydrogen vehicles). - High torque resistance allows for a reduction in the number of fasteners, achieving cost savings. - Contributes to the lightweight of components. ■ Lock Nuts (3-Blade Type): Used for disaster prevention supplies because they do not loosen! - Meets safety requirements for vibration dampers and highway sound barriers. - Protects people with nursing beds. - Widely applicable to transportation equipment such as automobiles and motorcycles, as well as buildings. Technical documents and detailed information for each nut can be viewed from downloads. Please feel free to contact us for case studies and proven results.

• others

Cost reduction through aluminum separation. Stainless steel for a higher level of strength. High-torque compatible resin bolts that can be embedded for use.

【High-Performance Bolt Feature】High-performance bolts can also be used for cost reduction! Case studies available. ■High-Strength Aluminum Bolts - Lightweight and strong. Contributes to weight reduction and improves fuel efficiency. - Can be used in aluminum products without the need for recycling separation. Reduces recycling costs. - Used in aluminum frames of the same material, achieving labor reduction and realizing cost reduction. ■High-Strength Stainless Steel Bolts - Despite being made of SUS304 material, ensures a higher strength (A2-90) through a special manufacturing process. - Achieved cost reduction by replacing with SUS304CUN material bolts. ■High Torque Compatible Insert Bolts (Outsert Bolts) - Bolts for resin that are embedded in resin parts. With high torque resistance, they do not rotate and protect the resin from damage. - With torque resistance and pull-out strength, it is possible to reduce the number of fasteners. Contributes to weight reduction and cost reduction. - Since back-filling (outsert) is also possible, it enables labor reduction and cost reduction. Detailed materials such as technical documents for each bolt can be viewed from the download section. Please feel free to contact us for case studies on cost reduction.

• others

A high-torque compatible embedded bolt for resin that is strong against rotation and withdrawal, and does not damage the resin. It allows for nut tightening when embedded in resin parts.

The "SSOO Bolt" is a resin embedded bolt (insert bolt) with a special octagonal head shape, offering excellent torque resistance and pull-out strength. An insert bolt is a bolt that is embedded in resin and fastened with a nut. By tightening with a nut, it allows for the fastening of resin parts to each other or resin parts to metal. It minimizes deformation and cam-out of the resin when fastened with high torque, enabling nut tightening at high torque levels. It can also be used for back embedding (thermal press fitting), making it suitable for shapes that cannot be integrally molded. Since the bolt can be used in an upright position within the resin, it improves the assembly of parts. The product design has been completely revamped, and sizes from M4 to M8 are now available. 【Features】 ● Special shape that minimizes cam-out and slip even when tightened with high torque ● Strong against pull-out, preventing deformation of resin parts ● Usable for both insert (simultaneous molding) and outsert (thermal press fitting) ● Mass production possible due to unique manufacturing methods ● Trusted Octa Lobular series *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• others

<New Product> Adding more peace of mind! A new insert nut that advances weight reduction. "Doesn't rotate" + "Doesn't loosen" = Protects resin products.

The "SSOO Nut PLUS" adds a cap to the reliable outsert nut, the SSOO Nut! It is a new insert nut from the Octa Lobular(R) series. <Are you having trouble fastening resin parts?> With the SSOO Nut PLUS, you can ensure the high torque resistance and pull-out strength of the "non-rotating" SSOO Nut. It solves the fastening issues of resin parts! 【Features】 ■ High torque resistance performance 1.8 times that of knurled products, preventing slipping and co-rotation even when tightened with high torque. ■ High pull-out strength 1.2 times that of knurled products, also excellent in vibration resistance. ■ Adds a horizontal cap to the SSOO Nut! - Can be used with simultaneous molding, making it suitable for thermosetting resins. - The cap prevents resin from wrapping around, ensuring secure fastening. - The horizontal cap can be used in space-constrained battery parts and resin components. - Prevents loosening by ensuring metal contact. It can be used as either an insert or an outsert, allowing you to choose specifications according to your application. *For more details, please refer to the materials available for download in PDF format or feel free to contact us.

• Work tools

Suppresses deformation of resin products. Special shape that is less likely to slip even under high torque. High pull-out strength also reduces the number of screw components and contributes to weight reduction.

The "SSOO Nut" features fine irregularities on the surface of the shaft to enhance torque resistance performance. It is a heat-pressed insert nut that achieves "difficulty in rotation" and "high pull-out strength." Even when tightened with high torque, it does not slip, preventing damage to resin products. Additionally, its excellent pull-out strength contributes to weight reduction by reducing the number of components. Available sizes include M4, M5, M6, and M8. 【Features】 ■ Shape designed to prevent slipping and rotation, protecting resin products from damage ■ Contributes to weight reduction through the reduction of components and downsizing ■ Torque strength and pull-out strength have been verified through testing ■ Proven track record as an automotive component *You can download PDF materials such as verification test data. For more details on specifications and pilot holes, please feel free to contact us.

• others

This is a strong insert nut that prevents slippage (co-rotation and idling) caused by bolt tightening and protects resin products from damage.

Insert nuts for resin (plastic) have traditionally utilized knurled, square, and hexagonal shapes, which have raised concerns about the nuts deforming the resin and spinning freely (slipping or idling) when bolts are tightened with high torque. As a result, we received strong requests from customers to develop insert nuts with shapes that can withstand high torque (high torque strength). We conducted research, development, and prototyping in-house and devised an original shape of insert nut that can handle high torque. It is designed for use during resin molding and also boasts excellent tensile strength (pull-out strength). 【Features】 - Strong nuts that prevent spinning (slipping or idling) and protect resin products from damage. - A unique octagonal shape that enables "high torque tightening," which has not been available before. - We have realized a shape that is difficult to spin, as requested by many customers. For more details, please contact us or download the catalog.

• others

Special octagonal shape with a skillful design! Contributes to weight reduction. A lineup of various insert nuts and insert bolts with simultaneous molding type, post-filling type, and with caps.

The Octa Lobular series contributes to weight reduction! - It protects resin parts and enables high-torque fastening. - The special octagonal shape improves the pull-out strength from resin parts! It achieves safe fastening that is also resistant to vibrations. - With high torque resistance, it allows for a reduction in the number of parts and downsizing. The Octa Lobular series can contribute to cost reduction! - Made of iron, the material cost is one-fifth that of brass. - It is manufactured through forging, which offers excellent material yield. - The unevenness of the shaft part, which enhances torque resistance, is processed through rolling. Mass production is possible. We present the Octa Lobular series developed by a total fastener manufacturer that produces both nuts and bolts. *You can download PDF materials to view verification test data for each product, such as torque tests and pull-out load tests.

• others

Non-magnetic, high-strength, and highly corrosion-resistant austenitic stainless steel bolts. They are environmentally friendly products that do not require heat treatment.

The "high-strength, high-corrosion-resistant stainless steel bolt" is made from austenitic stainless steel based on SUS304 and exceeds the strength classification A2 standard values of JIS B 1054. Through a proprietary molding process (patent obtained), it has achieved strength without the need for heat treatment. 【Features】 - Uses high-corrosion-resistant austenitic stainless steels SUS304 and SUS316 - Achieves high strength by utilizing material strength and work hardening through forging - The proprietary Bausinger effect suppression processing method eliminates the need for strengthening heat treatment, reducing environmental impact - Maintains high corrosion resistance and shortens lead time due to the absence of heat treatment processes - The screw head shape adopts a hexalobular design that offers high torque transmission - Balances corrosion resistance and strength, with a proven track record for use in automotive components (Note) The Bausinger effect refers to the phenomenon where, after applying plastic deformation in one direction, applying a load in the opposite direction results in plastic deformation occurring at a lower stress than when a load is applied again in the same direction. If you are interested in fastening with stainless steel components, please feel free to contact us.

• others

The bag nut is the original of JIS Type 3! We offer a variety of product series including iron, stainless steel, titanium, and weld (welding) nuts.

The founder of Daiichi Kogyo Co., Ltd., Akira Suzuki, was the first in Japan to manufacture and sell a bag nut (JIS Type 3 cap nut) with a cap that is press-formed onto a nut. Since its release, it has received positive feedback for being lighter and more affordable compared to traditional cutting types, and it has evolved into a wide variety of forms to suit various applications. You can find it in places close to you, so please remember Daiichi Kogyo when you see it. 【Features】 ○ The head is hollow, making it lightweight and allowing male threads to be inserted to the tip of the cap, preventing exposure of the threaded part. ○ The design is smart and has excellent decorative qualities. ○ It is standardized and can be mass-produced. For more details, please contact us or download the catalog.

• others

The weight is about two-thirds that of iron! Titanium bag nuts (cap nuts) that are resistant to salt damage, rust, chemicals, and heat.

The founder of Daiichi Kogyo Co., Ltd., Akira Suzuki, was the first in Japan to manufacture and sell a bag nut (JIS Type 3 cap nut) with a cap pressed onto a nut. Since its release, it has received positive feedback for being lighter and more affordable compared to traditional cutting types, and it has evolved into a wide variety of forms to suit various applications. From this bag nut series, we offer lightweight and highly corrosion-resistant titanium cap nuts. 【Features】 ○ Lightweight (titanium is about two-thirds the weight of iron and half the weight of copper) ○ Excellent corrosion resistance, chemical resistance, and heat resistance ○ Smart design with excellent decorative qualities ○ Standardized and suitable for mass production 【Standard Sizes】Hexagonal type: Compatible with sizes M6 to M12. *Some are made to order. For more details, please contact us or download the catalog.

• others

It is a bag nut that can be tightened with just one driver, even in narrow spaces!

The founder of Daiichi Kogyo Co., Ltd., Akira Suzuki, was the first in Japan to manufacture and sell a bag nut (JIS Type 3 cap nut) with a cap formed by pressing onto a nut. Since its launch, it has received positive feedback for being lighter and more affordable compared to traditional cutting types, and it has evolved into a wide variety of forms to suit various applications. From this bag nut series, we offer the "SS-UFO Cap Nut," which can be tightened with a screwdriver. The "SS-UFO Cap Nut" is a special bag nut with recesses (such as a cross hole) in the cap part. Even in tight spaces where a wrench cannot be used, this "SS-UFO Cap Nut" can be tightened with just one screwdriver. Please consider it in cases where hex nuts are difficult to tighten due to design constraints, or when you want to improve workability in small and narrow spaces. There are two head shapes available: pan (cross hole) and truss (cross hole). For more details, please contact us or download the catalog.

• Joints between components

Soft material assistance parts! Protects against buckling and cracking. No matter the shape, please consult us first.

Metal components such as "collars" are used in fastening soft materials like resin to prevent buckling and cracking of the material. For example, inserting a metal collar into a resin hole and fastening it with a bolt helps prevent buckling, sinking, and cracking. Daiichi Kogyo manufactures various types, shapes, and materials of collars, bushes, spacers, and more. We offer a variety of shapes, including cylindrical and flanged types. Please feel free to inquire about any shape you need. As specialists in manufacturing bolts and nuts, we can suggest parts tailored to your requirements. We welcome your consultation. We manufacture and sell products tailored to customer needs in Japan, China, and India. Please feel free to contact us for details regarding materials, delivery times, prices, and more.

• others

The three-blade design provides stable anti-loosening effects! Thanks to the high-strength friction ring, it can be reused multiple times! [Manufactured by Osaka Forming Co., Ltd.]

The "E-LOCK Nut" handled by Daiichi Industry features a three-blade design that enhances its anti-loosening function and possesses the strength to withstand repeated use. In the case of conventional two-blade products, one blade gets lodged in the thread valley, effectively resulting in a state of anti-loosening with only "one blade," leading to concerns about stability. However, this product's three-blade design effectively increases thread stability with "two blades." Additionally, durability tests under vibration showed no deformation in the three friction rings of this product, proving its ability to withstand repeated use due to the sustained effect of the springs. (Other manufacturers' nuts with high anti-loosening functions may experience deformation.) **Features** 1) The three-blade design provides a more stable anti-loosening effect compared to conventional products. 2) Prevents early detachment even if the tightening axial force decreases. 3) Strong and capable of withstanding repeated use. ★ This product is from Osaka Forming Co., Ltd. You can view the products handled by Osaka Forming through the link below.

• Other interior and exterior systems and units

Combination of "plastic processing" and "cutting processing"!

There are various processing methods in metalworking, including casting (foundry), plastic processing (forging, pressing, rolling), sheet metal processing (pressing, drawing), cutting processing (lathe, milling, drilling), grinding processing (polishing, grinding), and joining processing (welding, brazing). This time, we will introduce the combination of "plastic processing" and "cutting processing," which our company specializes in. In our fastener division, we combine "cold heading" from plastic processing with "dual-end machining" from cutting processing to produce vibration-damping components for four-wheel vehicles (automobiles), providing high-precision and complex products at low prices that are difficult to achieve with cold heading alone. Additionally, through combinations such as "cold heading" + "NC lathe," we also produce torque converter components for four-wheel vehicles (automobiles), which have received positive feedback from our customers.

• others

We have achieved complex shape forging processing with a reheader machine!

Metal processing includes a method called cold heading, which uses molds to achieve plastic deformation. Cold heading has the advantage of significantly less material waste compared to cutting processes, as well as stable precision and production speed, making it suitable for mass production of items such as bolts and nuts. However, for complex shapes like concave forms, cutting processes were necessary. Our company has introduced a re-header machine (split mold forming machine) that allows us to perform cold heading on semi-finished products after the initial heading process, enabling the formation of complex shapes and eliminating the need for cutting processes through net shape processing. By combining header and re-header machines, we have improved processing efficiency for complex shapes, allowing us to propose solutions for mass production. Additionally, the reduction of waste material from cutting processes helps lower costs.

• others

I will teach you how to make screws. We will provide free technical materials that cover everything about screw making, including materials, processing methods, inspection, and evaluation tests.

Screws are used in various machines such as transportation equipment and structures, but do you know how screws are made? Even seemingly simple screw components have various characteristics depending on their applications and purposes, including materials, processing methods, and inspection methods. To choose the right screw for a specific use, it is important to understand the characteristics of each manufacturing process, as well as inspection and evaluation tests. The textbook series on screw-related technologies explains the techniques involved in screw manufacturing in an easy-to-understand manner. If you are struggling with screw selection or want to learn about the technologies related to screw manufacturing, please refer to the PDF materials. Feel free to contact us with any inquiries.

• others

Are you making progress on measures for the "2024 Problem"? The management of drivers' working hours is becoming stricter, and in the logistics field, reducing "waiting time for loading" has become an urgent issue. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability status, reducing unnecessary waiting and queuing, and shortening waiting times, thereby alleviating the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start taking measures against the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult us first.

We sincerely apologize for the inconvenience, but we will be closed for summer vacation during the following period. Closure period: August 9 (Saturday) to August 17 (Sunday), 2025 Inquiries received during this period will be addressed sequentially starting from August 18 (Monday). We appreciate your understanding and cooperation.

Thank you very much for visiting our booth at the "High-Performance Materials Week [Osaka] 13th High-Performance Plastics Exhibition." Thanks to you, we had many visitors and were able to conclude the event successfully. In addition to the "PPLB-445" displayed on the day, we have a variety of products available. For those who were unable to measure samples at the venue, we offer a trial measurement service. Furthermore, for those who would like to know more about our products and services, we also accept online meetings. We welcome inquiries from those who attended as well as those who could not make it this time due to scheduling conflicts. Please feel free to contact us.

Aioi System is pleased to announce the release of the low-power wireless display "NW2991-JP," which achieves long battery life. This product supports 920MHz band wireless communication and can be operated in conjunction with wired displays. It can be easily integrated into existing systems by simply adding a master unit. With a high-speed response time of under one second and a variety of display functions for text and barcodes, it supports a wide range of applications. ▼ For more details, please see the press release linked below ▼ ■ Main Features - Maintenance-free design with a battery life of one year (low power consumption) - Compatible with mixed operation with wired displays - High-speed response (under one second) and diverse display formats - Stable communication in the 920MHz band ■ You can see the actual product at the exhibition This product will be displayed at the TOPPAN booth during the International Logistics Comprehensive Exhibition 2025, 4th INNOVATION EXPO. We invite you to visit the venue, see the actual product, and experience its performance. Dates: September 10 (Wed) - 12 (Fri), 2025 Venue: Tokyo Big Sight (Halls 4-8) Booth No: 5-907 (TOPPAN booth) Exhibition official website ▶ linked below We sincerely look forward to your visit.

Thank you very much for visiting our booth at the "Monozukuri World (Measurement, Inspection, and Sensor Exhibition) 2025." Thanks to you, we had many visitors, and the event concluded successfully. In addition to the "PPLB-445" showcased on the day, we have a variety of products available. For those who were unable to conduct sample measurements at the venue, we offer a trial measurement service. Furthermore, for those who would like to learn more about our products and services, we also accept online meetings. We welcome inquiries from those who attended, as well as those who were unable to come this time due to scheduling conflicts. Please feel free to reach out to us.