Information on various material testing machines demo units [Toyo Seiki Seisakusho Co., Ltd.]

This is a Mühlen burst testing machine with digital display and semi-automatic driving operation.

● There are low-pressure and high-pressure types of the Mullen burst tester, which evaluates the burst strength of materials such as paper and textiles. ● The M2 model achieves semi-automatic operation by adopting digital technology. Measurement is simple; just insert the test specimen and press the start switch. ● It is equipped with various safety devices, including a finger pinch prevention device, a glycerin splash prevention device, an overload prevention device, and an automatic return device for idle operation.

• Other measuring instruments

This is a tabletop universal testing machine with a maximum load capacity of 1 kN. The E3-L can accommodate specimens with large elongation.

● It can be installed in a compact and space-saving manner. ● The E3-L is suitable for strength testing of materials with high elongation, such as rubber and plastic films. ● The E3-S is suitable for strength testing of electronic components and packaging materials, syringe resistance testing, and food texture testing. ● You can choose from a wide range of chucks (gripping tools) and fixtures.

• Other measuring instruments

This is a universal material testing machine with a maximum load capacity of 20 kN.

■ It is possible to conduct physical property evaluation tests such as tensile strength, compressive strength, and bending strength for a wide range of materials including plastics and rubber. ■ You can choose from a rich lineup of chucks (gripping tools) and fixtures. ■ Measurements can be taken from tensile modulus* to fracture elongation. (Note: A high-precision type extensometer is required as an option.) ■ Stroke extension (300mm or 600mm) is also available as an option.

• Other measuring instruments

This is a portable adhesive testing machine that measures the adhesive properties (tack value) of non-sulfurized rubber, adhesive tapes, and the like. It allows for easy measurement of the adhesive strength of materials on-site.

In the molding process of tires and belts, where rubber components and reinforcing materials are layered and adhered together for vulcanization, it is very important to confirm the adhesiveness of the components in advance. This device has been developed as a tool to easily measure the adhesive strength of components on-site and can also be applied to measure the adhesive strength of tapes and similar materials. The ambient temperature at the site changes with the seasons, which also affects adhesiveness. The tackiness checker allows for easy measurement of adhesive strength on-site.

• Reinforcement and repair materials
• Other measuring instruments

This is a vulcanization testing machine (rotorless rheometer/MDR) for evaluating the vulcanization characteristics of rubber. Fully automated testing is also possible with the optional sample automatic loading and unloading device.

● The sample chamber die can be selected in addition to the flat die specification, also in a conical die specification. ● By installing a sample automatic loading and unloading device* (pin type or film type) and a data processing device*, full automation (continuous testing of 84 samples) is possible. This contributes to labor-saving and efficiency in measurement tasks. (*Optional) ● By installing options for foam pressure measurement and tanδ measurement functions, more physical properties of rubber can be obtained. *The photo includes the sample automatic loading and unloading device (optional).

• Other measuring instruments

This is a dispersing machine (paint shaker, paint conditioner, agitator) used for evaluating the dispersibility of pigments used in paints and inks.

-

• others

In the most common wear test for flat materials, the wear of the contact surface with two wear wheels is evaluated by the reduction in mass, thickness, and gloss.

It is the most common method for wear testing of flat materials, evaluating the wear of the contact surface with two wear wheels based on changes in mass, thickness, and gloss. We offer various types of wear wheels.

• others

This is a compact tabletop test press machine for laboratory use. It can be used for pressing plastic sheets for compression molding and for vulcanizing rubber sheets, among other applications.

- It is a compact tabletop type, so it can be easily used anywhere. - The pressure plate can be moved and finely adjusted with just the pump's pressurization operation. (Automatic switching, two-speed type) - It has a fast heating rate and excellent temperature distribution. - It is equipped with an overheat prevention circuit. - It satisfies the functions of two units (heating and cooling) with one device. (Model with water cooling plate) - Air cooling unit [Model AIR-C] (Option for water-cooled plate specification, increases cooling efficiency by flowing air through the water cooling pipe, includes a check valve to prevent backflow of cooling water, manual operation for opening and closing the air and cooling water valves) - Other options: Safety cover [Model SC], interlock safety cover [Model ISC], temperature controller [Model T-CONT] (programmed heating, maximum heating capacity of 12°C/min, maximum number of heating steps 16), thermal plate parallel assistance mechanism [Model PARA], over-temperature prevention unit [Model TEMPG]

• others

Melt Flow Index Tester (Melt Flow Indexer/Plastometer) is used for determination of MFR (melt mass-flow rate) and MVR (melt volume-flow rate), which are indicators of fluidity of thermoplastic polymer, according to ISO 1133 (JIS K 7210) and ASTM D1238.

【Features & Benefits】 • 100 test conditions can be registered on the touch-screen for easy operation. • A full range of optional features such as piston travel transducer, automatic cutting device, die-plug etc. • The automatic cutting device reduces the variation by the measurer, enabling accurate and safe testing. • Optional testing software allows the measured data to be viewed on a PC in real time, so that trends in MFR and MVR can be visually grasped while viewing graphs. • An optional automatic load-switching unit allows for multiple-weight measurements in which multiple loads are applied in a single test. 　Its built-in weights contribute to improved operability and safety.

• others

This is a melt indexer capable of multi-weight measurements as specified by ASTM D1238 Method D, in addition to standard single-weight measurements.

【Features】 ■ A load range from 0.325kg to 21.6kg is pre-installed in the device. By automatically selecting the weights, the operator's burden is reduced, and the safety of the operation is improved. ■ Up to three steps of load increase and decrease (multi-weight measurement) can be performed automatically in a single test. This allows for the determination of the flow rate ratio (FRR), which is commonly used as an indicator of how the rheological properties of thermoplastic plastics are affected by the molecular weight distribution of the material. (ASTM D1238 Method D) ■ It can also be used as a standard single-weight measurement melt indexer (MFR/MVR measuring device, MFR meter, MI meter, melt flow rate testing machine).

• others

This is a testing machine that applies bending actions to materials such as paper, plastic film, metal foil, and flexible printed circuit boards (FPC) to evaluate their foldability.

●Spring-loaded and dead weight types are available for selection.

• Other measuring instruments

This is a testing machine that applies impact to a plastic specimen and determines the impact value from the energy of the pendulum required for destruction.

● It features a digital display, eliminating errors from wear loss of the discard needle and reading errors by the operator. ● By replacing the hammer and specimen support base (fixed base), it can accommodate Charpy impact tests, Izod impact tests, and tensile impact tests. ● Easy operation with a color LCD touch panel. It can display and save the average, maximum, minimum, coefficient of variation, and standard deviation of impact values. ● Measurement data can be saved to a PC. (*Requires optional dedicated data processing software. PC is optional.) ● Hammer release* can be operated with a button. There is no individual variation during hook release, improving reproducibility. (*Optional) ● Instrumentation system* is selectable. (*Optional. Only for Charpy impact tests and in-basis tensile impact tests.) ● Positioning support base* is selectable. It allows for easy and accurate setting of the specimen. (*Optional for Charpy impact tests.) ● Various safety covers* (with or without a top) are selectable. (*Optional)

• Other measuring instruments

This is a testing machine that measures the static friction coefficient (μS) and dynamic friction coefficient (μK) of materials such as plastic films, paper, textiles, and leather products using the horizontal method.

● You can check the measurement graph on the touch panel. ● Measurement results can be saved (up to 100 data). ● You can print measurement conditions and results on a small printer* (optional). ● You can display and save measurement results on a PC* (optional). ● The display language can be switched according to settings (Japanese/English). ● The load display is range-free. ● A safety cover* can be installed (optional). ● There is also a hot plate specification available.

• Other measuring instruments

It is a testing machine (friction coefficient measuring device) that measures the static friction coefficient (μS) of materials such as plastic films, paper, and textile products using the inclined plane method.

● It has a compact space-saving design. ● It features a liquid crystal touch panel, making operations such as setting test conditions and displaying test results easy. ● Test results can be imported to a PC* (optional).

• Other measuring instruments

It is a testing machine that evaluates the stiffness of ultra-thin materials such as films, measuring the resistance to collapse in a loop shape.

You can evaluate the strength of ultra-thin materials such as films.

• Other measuring instruments

This is a testing machine for measuring the melt viscosity of polymer materials when subjected to shear flow in a molten state. Measurement of die swell and melt tension is also available as an option.

● Easy cleaning of the furnace cylinder with button operation. ● Supports test speeds up to 1500mm/min. ● Added twin-cylinder specifications to the lineup. ● Pressure sensor specifications are also available as an option. (※ Only for ∅15mm furnace body, optional) ● Safety door included as standard. ● Over 40 years of experience and trust since the development of the first generation capillograph.

• Other measuring instruments
• Other analytical equipment

This is a notch processing machine that automatically performs notch cutting on Charpy impact test specimens and Izod impact test specimens. It enables high-precision notch processing with minimal burrs.

● This is a machining machine that performs notch cutting on Charpy and Izod impact test specimens based on the notch processing conditions specified in JIS K 7144 and ISO 2819. ● Processing conditions (such as cutting depth per pass and feed rate) can be set and registered according to the material of the test specimen. ● High-precision notch cutting is possible in units of 0.01mm using a pulse motor. ● In addition to notch cutting for impact test specimens, the A-4 type can also cut out specimens for impact, bending, creep, etc., from JIS K 7139 and ISO 3167 multi-purpose test specimens (A-type dumbbells) through end slicing and side cutting. ● The dimensions of the notch cutter tip and the actual notch dimensions of the processed samples are inspected and managed using a contour measuring machine.

• Other measuring instruments

This is a testing machine for identifying the blow point of rubber materials. By understanding the minimum required vulcanization time for rubber, it contributes to improving product quality and productivity.

The blow point refers to the minimum degree of vulcanization required to eliminate the presence of bubbles generated by insufficient vulcanization inside the vulcanized material at the end of the vulcanization process when vulcanizing a composite containing rubber under pressure. Measuring the blow point is extremely important for producing products with a short vulcanization time and no bubbles at all. This blow point varies depending on the composition of the rubber compound, the mixing method, temperature conditions, and so on, so it is necessary to measure it very frequently for quality control of vulcanized rubber products and for research and development of rubber compositions.

• others

It is a testing machine for understanding the processing characteristics of polymer materials such as thermoplastic resins, thermosetting resins, and elastomers.

The Laboplast Mill S series consists of a basic unit, measurement head (mixer/extruder), dedicated frame, data processing unit (with rack), and its accessories. The control of the equipment and the data processing and analysis of various characteristic values such as torque, resin temperature, and pressure are performed by a computer. 【Features】 ■ The measurement head is integrated with the dedicated frame, improving operability and safety. ■ Automatic centering function for coupling. ■ Added model 3S500 with a maximum rotation speed of 500 rpm to the lineup. *Sample testing is available at our factory in Kita-ku, Tokyo.

• others

Tabletop mixing and extrusion molding evaluation test device. It allows for processing performance evaluation with very small sample sizes using a super compact mixer and extruder.

The "Laboplast Mill Micro" is a tabletop experimental device used for evaluating the kneadability and extrusion characteristics of samples that can only be obtained in small quantities, such as ultra-small volume samples synthesized at the laboratory level, nanoparticles (carbon nanotubes, silica, titanium oxide, etc.), and next-generation composite materials in research and application. ■ Sample testing is available at our factory (Kita-ku, Tokyo), so please feel free to contact us.

• Other measuring instruments
• Other analytical equipment

It is a testing machine used to measure the heat release rate and heat release amount during the combustion of materials, and it is used for performance evaluation of fire-resistant materials based on the Building Standards Act.

The corn calorimeter is a testing device that measures the rate of heat generation and the amount of heat generated based on the theory that "the amount of heat generated and the amount of oxygen consumed are constant (13.1 MJ per kg of oxygen)" through a method of measuring oxygen consumption in the combustion of organic materials. It is used for performance evaluation of fire-resistant materials based on the Building Standards Act. Since it allows for understanding the combustion behavior and smoke generation of various materials, it greatly contributes to the research of fire resistance characteristics.

• Analysis and prediction system
• Other measuring instruments
• Other analytical equipment

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.

The "Hotron Non-Contact Switch" allows you to open and close doors without directly touching door knobs or switches, making it hygienic! You can choose from two types: the "Hand Wave Sensor," which only requires you to wave your hand, and the "Foot Switch," which only requires you to place your foot at the entrance. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, restaurants, hospitals, and nursing facilities. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ A wide variety of options to choose from based on application and location ○ Ideal for places where hygiene is a priority, such as food factories and medical facilities ○ Prevents unnecessary detection due to the switch mechanism 【Product Lineup】 ■ Hand Wave Sensor Series ○ Exposed waterproof type, front, down, and side-facing types "PF-R5" ○ Exposed type, front-facing type "PF-R1" ○ Embedded type, front-facing type "PF-U2" ○ Exposed type, downward wide type "PF-R4" ■ Foot Switch Series ○ Slim type with wide opening, vertical beam type "PF-01S" ○ Slim type with wide opening, horizontal beam type "PF-03S" ○ Standard type, horizontal beam type "PF-05" ◎ For more details, please download the catalog or contact us.

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

We will be exhibiting at the "28th Interphex Week Tokyo / 8th Regenerative Medicine EXPO Tokyo," which will be held from May 20 (Wednesday) to May 22 (Friday), 2026. This is a great opportunity to actually touch and experience our cleanwear and other products. We look forward to your visit! ● Dates: May 20 (Wednesday) to May 22 (Friday), 2026, 10:00 AM to 5:00 PM ● Venue: Makuhari Messe (Chiba Prefecture), Booth Number: 22-44 * This is a joint exhibition with Asahi Dupont Flashspan Products Co., Ltd. For more details, please feel free to contact us through the related link below: [Protective Clothing Wisdom.com]. [Protective Clothing Wisdom.com] is a comprehensive information site for safe working environments, providing guidance on protective clothing and equipment for different work environments, methods for putting on and taking off, and information on customer usage records.

We will be exhibiting at the International Fire and Disaster Prevention Exhibition at IFCAA 2026. We will showcase useful firefighting equipment such as water stop board box walls, cleaning devices, water tanks, and disaster lighting. We look forward to seeing you at Tent Booth No. 10 in Shirakawa Park. Dates: May 28, 2026 (Thursday) 10:00 AM - 5:00 PM May 29, 2026 (Friday) 10:00 AM - 6:00 PM *Shirakawa Park will close at 3:30 PM Venue: Indoor Booth: Misonoza 1-6-14 Sakae, Naka Ward, Nagoya City, Aichi Prefecture, 460-8403 Outdoor Booth: Shirakawa Park 2-17 Sakae, Naka Ward, Nagoya City, Aichi Prefecture, 460-0008