Handling CAE solutions

"Particle-PLUS" is a plasma and rarefied fluid analysis software that specializes in magnetron sputtering devices using the particle method.

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It excels in low-pressure plasma analysis. - It can perform advanced physical model analyses such as CCP and external circuit models. - It specializes in plasma simulations in low-pressure gases, where fluid modeling is challenging. - It supports 2D (two-dimensional) and 3D (three-dimensional) analyses, allowing efficient analysis of complex models. - As a strength of our in-house developed software, it can perform standard CCP and magnetron sputtering calculations, as well as customization to fit customer devices. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

• Other analytical equipment
• Scientific Calculation and Simulation Software
• Other Software

"Particle-PLUS" is a plasma and rarefied fluid analysis software that uses the particle method.

"Particle-PLUS" is a simulation software suitable for research, development, and manufacturing of devices and materials using plasma. - It specializes in low-pressure plasma analysis. - It can perform advanced physical model analysis such as CCP and external circuit models. - It excels in plasma simulation for low-pressure gases, where calculations using fluid models are challenging. - It supports 2D (two-dimensional) and 3D (three-dimensional) analysis, efficiently handling complex models. - As a strength of our in-house developed software, it can perform standard CCP and magnetron sputtering calculations, as well as customization to fit the customer's equipment. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD) - Electrophoresis, etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us.

• Other analytical equipment
• Scientific Calculation and Simulation Software
• Other Software

"Particle-PLUS" is a plasma analysis software suitable for simulations such as plasma reaction furnaces and chemical vapor deposition (CVD).

Particle-PLUS is plasma and rarefied fluid analysis software that uses the particle method. It is effective for research, development, and manufacturing of devices and materials using plasma. It is also capable of analyzing advanced physical models such as dual-frequency CCP and external circuit models. With comprehensive support, even those new to simulation or busy with experiments can reliably achieve results. The software employs a particle model to analyze plasma, utilizing the PIC/MC (Particle In Cell / Monte Carlo) method to track the motion of particles representing electrons and ions. Depending on the target plasma density, it efficiently switches between implicit methods for relatively high densities and explicit methods for low densities, allowing for effective solutions even for complex models. It excels in plasma simulations of low-pressure gases, where fluid modeling is particularly challenging. In addition to standard functions for CCP, ICP, and magnetron sputtering calculations, customization to fit customer devices is also available.

• Other analytical equipment
• Scientific Calculation and Simulation Software
• Other Software

"Particle-PLUS" is a plasma and rarefied fluid analysis software that excels in 2-frequency CCP analysis using the particle method.

"Particle-PLUS" is a simulation software suitable for research and development of devices and equipment using plasma, compatible with CCP. - Excels in simulating low-pressure gases where fluid models are difficult to compute. - Advanced physical model analysis including CCP and external circuit models. - Supports 2D (two-dimensional) and 3D (three-dimensional) analysis, efficiently handling complex models. - As a strength of our in-house developed software, it not only includes standard functions for CCP and magnetron sputtering calculations but also allows customization to fit customer equipment. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitively coupled plasma (CCP) - Dielectric barrier discharge (DBD), etc. ◆ Outputs various calculation results ◆ - Potential distribution - Density distribution/temperature distribution/generation distribution of electrons and ions - Particle flux and energy flux to the wall - Energy spectrum of electrons and ions at the wall - Density distribution/temperature distribution/velocity distribution of neutral gas, etc. *For more details, please feel free to contact us at information@wavefront.co.jp.

• Other analytical equipment
• Scientific Calculation and Simulation Software
• Other Software

"Particle-PLUS" is a plasma and rarefied fluid analysis software that is also skilled in 2-frequency CCP analysis using the particle method.

"Particle-PLUS" is a simulation software suitable for research and development of devices using plasma, compatible with CCP. - Excels in plasma simulation for low-pressure gases, where fluid modeling is challenging. - Advanced physical model analysis, including CCP and external circuit models. - Supports 2D and 3D, efficiently analyzing even complex models. - As a strength of our in-house developed software, it offers standard functions for CCP and magnetron sputtering calculations, as well as customization to fit customer devices. ◆ Supports various cases ◆ - Magnetron sputtering - PVD, plasma CVD - Capacitive Coupled Plasma (CCP) - Dielectric Barrier Discharge (DBD), etc. ◆ Outputs various calculation results ◆ - Potential distribution - Electron and ion density distribution/temperature distribution/generation distribution - Particle flux and energy flux to the walls - Energy spectrum of electrons and ions at the walls - Neutral gas density distribution/temperature distribution/velocity distribution, etc. *For more details, please feel free to contact us at information@wavefront.co.jp.

• Other analytical equipment
• Scientific Calculation and Simulation Software
• Other Software

Dilute fluid analysis software 'DSMC-Neutrals' that also supports 'shower head type CVD' analysis.

Simulation analysis of gas flow in a shower head type CVD device Initially supports various simulations 【Features】 ■ Adopts unstructured mesh, allowing for calculations that reflect the complex shapes of actual devices ■ High parallel efficiency enables quick computation results even for large-scale geometries ■ Utilizes a particle method, ensuring convergence to a solution even with poor-quality computational grids, unlike fluid models ■ Comprehensive technical support allows beginners and those busy with experiments to reliably achieve results ◆ Supports various cases ◆ - Simulation of dilute gas flow in a vacuum chamber - Simulation of thin film generation in semiconductor manufacturing - Simulation of thin film generation in semiconductor manufacturing such as chemical vapor deposition (CVD), organic light-emitting diode (OLED), and molecular beam epitaxy (MBE) ◆ Outputs various computational results ◆ - Calculation of chemical reactions - Calculation of chemical reactions from Arrhenius-type reaction data - Calculation of dissociation, recombination, and molecular (atomic) exchange reactions - Multiple reaction equations can be set up on the GUI *We also offer contract analysis, so please feel free to contact us.*

• Scientific Calculation and Simulation Software

Analysis of gas flow under low-pressure conditions can be performed. Analysis software that also supports rarefied gases (rarefied fluids).

**Features** - Adopts unstructured mesh, allowing for calculations that directly reflect the complex shapes of actual devices. - High parallel efficiency enables quick computation results even for large-scale shapes. - Utilizes a particle method, ensuring convergence solutions even with poor-quality computational grids, unlike fluid models. - Comprehensive technical support ensures that even those new to simulations or busy with experiments can reliably achieve results. **Supports Various Cases** - Simulation of rarefied gas flow within a vacuum chamber. - Simulation of thin film generation in semiconductor manufacturing. - Simulation of thin film generation in semiconductor manufacturing processes such as Chemical Vapor Deposition (CVD), Organic Light Emitting Diodes (OLED), and Molecular Beam Epitaxy (MBE). **Outputs Various Calculation Results** - Calculation of chemical reactions. - Calculation of chemical reactions from Arrhenius-type reaction data. - Calculation of dissociation, recombination, and molecular (atomic) exchange reactions. - Ability to set multiple reaction equations on the GUI. *For more details, please refer to the catalog or feel free to contact us.*

• Analysis and prediction system
• Scientific Calculation and Simulation Software

"Dust behavior affecting contamination" analysis supported by the rarefied fluid analysis software 'DSMC-Neutrals'.

Simulation Analysis of Dust Behavior Affecting Contamination Initially compatible with various simulations 【Features】 ■ By adopting unstructured meshes, it is possible to compute the exact shape of complex actual devices. ■ High parallel efficiency allows for quick computation results even for large-scale shapes. ■ Since a particle method is used, unlike fluid models, convergence solutions can always be obtained even with poor quality computational grids. ■ With comprehensive technical support, even those new to simulations or busy with experiments can reliably achieve results. ◆ Compatible with various cases ◆ - Simulation of rarefied gas flow in a vacuum chamber - Simulation of thin film generation in semiconductor manufacturing - Simulation of thin film generation in semiconductor manufacturing such as Chemical Vapor Deposition (CVD), Organic EL (OLED), and Molecular Beam Epitaxy (MBE) ◆ Outputs various computation results ◆ - Calculation of chemical reactions - Calculation of chemical reactions from Arrhenius-type reaction data - Calculation of dissociation, recombination, and molecular (atomic) exchange reactions - Multiple reaction equations can be set up on the GUI *We also offer contract analysis, so please feel free to contact us.

• Scientific Calculation and Simulation Software
• Other Software
• Other Hydrogen/Fuel Cells

Analysis of gas flow under low-pressure conditions. Analysis software compatible with rarefied gases (rarefied fluids).

**Features** - By adopting an unstructured mesh, it is possible to compute the exact shape of complex real devices. - High parallel efficiency allows for quick computation results even for large-scale shapes. - Since it employs a particle method, unlike fluid models, it can achieve a converged solution even with poor-quality computational grids. - With comprehensive technical support, even those new to simulation or busy with experiments can reliably obtain results. **Supports Various Cases** - Simulation of rarefied gas flow in a vacuum chamber. - Simulation of thin film generation in semiconductor manufacturing. - Chemical vapor deposition (CVD), organic light-emitting diode (OLED), molecular beam epitaxy (MBE). - Film deposition simulations that include chemical reactions like CVD. **Outputs Various Calculation Results** - Calculation of chemical reactions. - Calculation of chemical reactions from Arrhenius-type reaction data. - Calculations of dissociation, recombination, and molecular (atomic) exchange reactions. - Multiple reaction equations can be set up on the GUI. *For more details, please refer to the catalog or feel free to contact us.*

• Analysis and prediction system
• Scientific Calculation and Simulation Software

Advanced analysis can be easily performed on SOLIDWORKS! For shortening development time and reducing costs!

"Simerics MP for SOLIDWORKS" is a CAD-integrated thermal fluid analysis software that can be operated within SOLIDWORKS. Integrated into the SOLIDWORKS GUI, designers can perform everything from design to analysis themselves. The calculation settings are also simple, allowing for quick mastery of the operation. By enabling designers to conduct various analyses, such as examining optimal shapes, identifying the causes of problems, and verifying performance—tasks that were traditionally outsourced—this leads to reduced development time, improved quality, and cost savings. 【Features】 ■ Supports a wide range of simulations including flow, turbulence, heat conduction, and convection ■ Automatically generates computational meshes directly from CAD surfaces ■ Extremely fast, accurate, and robust solver ■ Stable iterative calculations for very challenging problems, such as micro-meter scale geometries ■ Accurate calculation results that show excellent correlation with physical tests *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other CAD
• Scientific Calculation and Simulation Software
• Other Software

Advanced analysis can be easily performed on SOLIDWORKS! For shortening development time and reducing costs!

"Simerics MP for SOLIDWORKS" is a CAD-integrated thermal fluid analysis software that can be operated on SOLIDWORKS. Integrated into the SOLIDWORKS GUI, designers can perform everything from design to analysis themselves. The calculation settings are simple, allowing for quick mastery of the operation. By enabling designers to conduct various analyses that were traditionally outsourced, such as optimal shape evaluation, root cause investigation, and performance verification, it leads to reduced development time, improved quality, and cost savings. 【Features】 ■ Supports a wide range of simulations including flow, turbulence, heat conduction, and convection ■ Automatically generates computational meshes directly from CAD surfaces ■ Extremely fast, accurate, and robust solver ■ Stable iterative calculations for very challenging problems, such as micro-meter scale geometries ■ Accurate calculation results that show excellent correlation with physical tests *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other CAD
• Scientific Calculation and Simulation Software
• Other Software

Advanced analysis can be easily performed on SOLIDWORKS! For shortening development time and reducing costs.

"Simerics MP for SOLIDWORKS" is a CAD-integrated thermal fluid analysis software that can be operated within SOLIDWORKS. Integrated into the SOLIDWORKS GUI, designers can perform everything from design to analysis themselves. The calculation settings are also simple, allowing for quick mastery of the operation. By enabling designers to conduct various analyses that were traditionally outsourced, such as optimal shape exploration, problem identification, and performance verification, it leads to reduced development time, improved quality, and cost savings. 【Features】 ■ Supports a wide range of simulations including flow, turbulence, heat conduction, and convection ■ Automatically generates calculation meshes directly from CAD surfaces ■ Extremely fast, accurate, and robust solver ■ Stable iterative calculations for very challenging problems such as micro-scale geometries ■ Accurate calculation results that show excellent correlation with physical tests *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other CAD
• Scientific Calculation and Simulation Software
• Other Software

An article has been published about the case of introducing the expense reimbursement system "Rakuraku Seisan" at TSP Corporation. ~ In the case of TSP ~ Before the introduction, there were challenges such as dealing with the "paper" sent from various locations and the reliance on specific individuals for the tasks. After the introduction, the input and checking of FB data, which used to take 2 to 3 hours, can now be completed in just 5 minutes. Additionally, the mindset of the accounting department, which was previously reliant on manual entry, has changed. [Case Overview] ■ Challenges before introduction - Dealing with "paper" sent from various locations, reliance on specific individuals ■ Key points of introduction - A robust support system for setup and operation - Easy to start from a small scale both financially and functionally *For more details, please refer to the related links or feel free to contact us.

The facility operating the nurse call system has made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call. ○ Up to 5 transmitters can be registered with one receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four configurations: left, center, right, and a total of 12 spots. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor with a single model. 【Recommended for such locations!】 ☑ Entrance facing a busy corridor ☑ Counter or sign near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.