Seiko Electric Co., Ltd. will exhibit at the Sewerage Expo '17 Tokyo.

Meets protection rating IP55! Achieves top-class efficiency in waterproof LED lighting fixtures with a unique energy consumption efficiency of 146 lm/W!!

New Release of Damp-Proof and Waterproof LED Lighting Fixtures (LYAA and LYBA Series) The damp-proof and waterproof LED lighting fixtures (LYAA and LYBA series) comply with protection class IP55, making them suitable for installation in indoor environments where dust is generated and in outdoor environments without roofs. The specific energy consumption efficiency is 146 lm/W (*1), achieving one of the highest energy efficiencies in the industry for waterproof LED lighting fixtures. Additionally, we offer a wide range of 160 models, allowing you to choose the most suitable model based on the installation location.

• Cord Pendant
• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Lighting Planning

LED lighting suitable for use in explosive hazardous locations ZONE 1 and ZONE 2.

New Release of Explosion-Proof LED Lighting Fixtures (LZIB Series) Seiwa Electric Co., Ltd. has enhanced its lineup of LED lighting fixtures under the <Star Reds> series to meet diverse needs for energy-saving equipment implementation in factories and initiatives for the environment (Minamata Convention). We are pleased to announce that we will begin accepting orders on June 15 for the LZIB series of explosion-proof LED lighting fixtures and floodlights, which can be used in explosive hazardous areas Zone 1 and Zone 2, equivalent to mercury lamps (400W, 250W) that require high reliability. <Models> Explosion-Proof LED Lighting Fixture: LZIB1308 Series (Equivalent to 400W Mercury Lamp) LZIB1304 Series (Equivalent to 250W Mercury Lamp) Explosion-Proof LED Floodlight: LZIB13087 (Equivalent to 400W Mercury Lamp) LZIB13047 (Equivalent to 250W Mercury Lamp)

• Floodlight
• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Lighting Planning

Reliability in explosion-proof areas is guaranteed, and glare reduction and high color rendering improve work efficiency! Compared to our conventional fluorescent fixtures, power consumption is reduced by approximately 55%!

Introducing the new explosion-proof LED lamp series, the 'LZBA series', designed to meet the high reliability required in explosion-proof areas and suitable for use in explosive hazardous locations Zone 1 and Zone 2! While equipped with high output equivalent to fluorescent lamps, we have achieved approximately 55% reduction in power consumption, from 91W to 40.5W compared to our conventional explosion-proof fluorescent fixtures. Additionally, we have reviewed the design of the LED module and housing, achieving a lightweight and compact form. With glare reduction and high color rendering (Ra83), it also contributes to improving the working environment. ★ Zone 1 (Class 1 location): Areas where explosive atmospheres may be generated during normal operation of plants, etc. ★ Zone 2 (Class 2 location): Areas where explosive atmospheres are not expected to be generated during normal operation of plants, etc., and even if they were to occur during abnormal conditions, they would only exist for a short time. 【Features】 ■ Three types to choose from (equivalent to 1-lamp and 2-lamp for FHF32W high output type, equivalent to FHF16W high output type) ■ Achieved approximately 27% weight reduction for 2-lamp use and approximately 21% for 1-lamp use compared to our conventional explosion-proof fluorescent fixtures ■ Size reduction of about 33% for the 1-lamp type *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Cord Pendant
• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Lighting Planning

The first in the domestic industry: Emergency LED lighting equipment that can be used in explosion-proof areas. Certified by the Industrial Safety and Technology Association, approved by the Minister of Land, Infrastructure, Transport and Tourism, displaying the JIL mark.

The first in the domestic industry: Emergency LED lighting fixtures that can be used in explosion-proof areas Launch of explosion-proof emergency LED lighting fixtures (VZAA series) We have launched the first explosion-proof emergency LED lighting fixtures in the domestic industry that can be installed in explosion-proof areas where there is a risk of explosion or fire due to flammable gases or combustible liquids. Currently, emergency lighting fixtures defined by the Building Standards Act are limited to "incandescent lamps" and "fluorescent lamps," and the use of LEDs as emergency light sources has not been permitted. Therefore, while there have been LED emergency lighting fixtures that received certification based on the Minister of Land, Infrastructure, Transport and Tourism's certification system and passed the self-assessment of emergency lighting fixtures by the Japan Lighting Manufacturers Association, they could not be used in explosion-proof areas where there is a risk of explosion or fire. In response to the many requests for the use of LED as an emergency light source even in explosion-proof areas, we have developed explosion-proof emergency LED lighting fixtures that have passed type testing by the Japan Industrial Safety and Health Association, received certification from the Minister of Land, Infrastructure, Transport and Tourism, and display the JIL mark from the Japan Lighting Manufacturers Association, making us the first in the domestic industry to do so. Orders will begin on September 15, 2016. Since the JIL mark is affixed to the product, building confirmation procedures can continue to be carried out smoothly as before.

• Cord Pendant
• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Lighting Planning

Explosion-proof LED lighting fixtures LZLA series, ideal for replacing incandescent lamps and circular fluorescent lamps in explosion-proof areas.

New Release of Explosion-Proof LED Lighting Fixtures (LZLA Series) Seiwa Electric Co., Ltd. has enhanced its lineup of LED lighting fixtures under the <Star Reds> series to meet diverse needs in the introduction of energy-saving equipment at various factories and initiatives for the environment (Minamata Convention). We are pleased to announce the addition of the new explosion-proof LED lighting fixtures "LZLA Series," which can be used in explosive hazardous areas Zone 1 and Zone 2, equivalent to incandescent lamps (100W, 200W) and high-output FHF32W (circular and compact fluorescent lamps). Orders will begin on May 15. The main body of the fixture employs aluminum die-casting, which excels in heat dissipation and lightweight design, allowing for effective heat dissipation measures. This increases the operating temperature range to -20°C to +50°C (compared to our conventional LED products, which are -20°C to +40°C) and enhances resistance to high-temperature environments. Additionally, it achieves a maintenance-free LED module lifespan of 60,000 hours while also possessing high durability and weather resistance.

• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Lighting Planning

LED Road Lighting DELGA WNLA Series Road and Tunnel Lighting Equipment Specifications 2015 Edition Compliant

LED Road Lighting DELGA WNLA Series ● Complies with all design conditions of the Ministry of Land, Infrastructure, Transport and Tourism's LED Road and Tunnel Lighting Introduction Guidelines (Draft) ● Complies with the Road and Tunnel Lighting Equipment Specifications (2015 Edition) ● Currently applying for NETIS approval from the Ministry of Land, Infrastructure, Transport and Tourism ● Complies with NEXCO's Standard Specifications for LED Road Lighting Fixtures, Specification No. 15150 (July 2015) ● New Feature 1 Adjustable installation angle in three stages Equipped with Angle Adjust Adapter ● New Feature 2 Eliminates snow accumulation by removing heat dissipation fins Finless roof design ● Lightweight and Compact Industry-leading lightest weight of 9.0 kilograms Significantly reduced pressure contact area ● Energy-efficient and Long-lasting System lifespan of 60,000 hours (15 years if lit for 4,000 hours annually, maintenance-free except for cleaning) Achieves maintenance-free operation

• Dam construction
• Civil Engineering Company
• Lighting Planning

You can estimate the required number of units and brightness with your computer! Would you like to save time on lighting design?

The simple lighting calculation software "STAR LIGHTER" from Hoshi and Denki allows for easy lighting design. Additionally, it can calculate the number of fixtures and average illuminance for new installations or updates. It supports various indoor and outdoor lighting calculations, and it can also create horizontal illuminance distribution maps for a single fixture, thereby improving work efficiency compared to traditional methods. Please give it a try. 【Features】 - Capable of calculating the number of fixtures for indoor use - Easy creation of illuminance distribution maps - Conducts illuminance calculations for outdoor areas and creates horizontal illuminance distribution maps *For more details, please contact us or refer to the catalog. ---------------------------------------------------- You can also download it from our website. Please check it out below.

• Cord Pendant
• Waterproof, moisture-proof, explosion-proof lighting fixtures
• Lighting Planning

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, particularly at entrances facing sidewalks or roadways, there is a risk of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures using various sensors and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "sensor" + "controller" + "switching power supply (24V)" + "LED rotating light." *Please note that a separate control panel is required to include the controller and switching power supply (24V) when using the exit warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

The comprehensive catalog "General Catalog J-02" for the 2023 fiscal year has been completed. This comprehensive catalog features many Joe Prince products primarily used in industrial equipment and facilities. Please make use of it.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.