In-chamber imaging during constant temperature and humidity testing.

At the same time, we also support monitoring of power supply, temperature, and electrical items, as well as checks after extraction!

Our company conducts environmental testing using a constant temperature and humidity chamber with a front glass window and a camera, allowing us to capture and monitor the operational status, such as screen displays. During environmental testing using equipment like constant temperature and humidity chambers, monitoring the condition of the test subjects using loggers for parameters like voltage, current, resistance, and temperature is widely practiced. For samples where monitoring with loggers is difficult, we combine a constant temperature and humidity chamber equipped with a front glass window option, a camera, and monitoring software to conduct environmental tests while capturing and monitoring the condition of the testing equipment. [Example of monitoring an LCD panel] - Interval shooting at regular intervals - Motion detection shooting that captures images when changes in condition are detected - Monitoring of indicator lamps is also possible *For more details, please download the PDF or feel free to contact us.

• Other measuring instruments

In-Situ Continuous Measurement Reliability Evaluation Testing Service

In-situ continuous measurement reliability evaluation tests involve applying stress while measuring characteristics to conduct reliability assessments. ● Accurate understanding of failure time is possible In a readout method where samples are taken out from a stress environment at fixed times, failure can only be understood at the timing of the readout, making it impossible to know the exact time of failure occurrence. In-situ measurement allows for accurate understanding of failure time. ● Detection of recoverable failures is possible Recoverable failures can cause significant issues in the market. In most cases, these recoverable failures cannot be detected using the readout method, but in-situ measurement allows for the detection of recoverable failures, enabling accurate judgment and assessment. ● Monitoring of stress application conditions on samples is possible The stress application conditions and measurement data can be confirmed in real-time.

• Analysis and prediction system
• Other analytical equipment

We will thoroughly evaluate and verify the LED from all angles.

■Comprehensive Capability Consistent evaluation resistance from reliability testing to electrical property measurement, optical property measurement, and further analysis. ■Rich Analytical Methods - Forward bias analysis / Reverse bias analysis - Detection from visible to infrared - Emission analysis / OBIRCH analysis ■Special Techniques By filtering the visible light range, weak emissions from abnormal areas are detected without missing them.

• Garden lighting/lights (LED/solar)

We conduct reliability evaluation tests for various electronics products, components, and materials in accordance with standard specifications such as JIS, JEDEC, and MIL.

■High Accelerated Life Test: 5 units ■Thermal Shock Test: 24 units ■Constant Temperature and Humidity Test: 22 units ■Liquid Tank Thermal Shock Test: 3 units ■High-Temperature Storage Test ■Hot Oil Resistance Evaluation Test ■Insulation Resistance Continuous Monitoring Evaluation ■Continuity Resistance Continuous Monitoring Evaluation ■Electromigration Continuous Monitoring Evaluation ■Microfocus X-ray Transmission Observation ■Ultrasonic Microscope Observation ■ESD Evaluation Test ■CDM Evaluation Test ■Universal Tensile Evaluation Test ■Cross-Section (Polishing) Observation Service (Evaluation before and after environmental testing is also possible) ■Solar Cell (Crystalline Silicon/Amorphous Silicon/Compound/Organic Thin Film, etc.) EL Emission Phenomenon ■Heat Generation Observation

• Other analytical equipment

We provide comprehensive support for customers facing reliability issues with overseas manufactured LCD displays, from reliability testing to failure analysis and material analysis.

Unreliable LCD displays are causing problems in the market. At Aites, we solve our customers' reliability issues by conducting reliability testing design and visual inspections before and after testing, leveraging our extensive experience and state-of-the-art equipment. Furthermore, we provide support from failure mode classification to failure analysis and material analysis.

• Other analytical equipment

We conduct environmental testing, as well as non-destructive observation and electrical characteristic measurements.

At AITES, we use environmental testing equipment that complies with standard specifications such as JIS, JEDEC, and MIL to conduct reliability evaluation testing for various electronics products, components, and materials. We offer a range of tests including electrical testing, non-destructive observation, and power cycle testing. 【Environmental Testing】 ■ Highly Accelerated Life Testing ■ Constant Temperature and Humidity Testing ■ Thermal Shock Testing ■ Liquid Bath Thermal Shock Testing ■ Temperature and Humidity Cycle Testing ■ In-Situ Continuous Measurement Reliability Evaluation Testing Service *For more details, please refer to the PDF document or feel free to contact us.

• Other analytical equipment

Two high-power constant temperature and humidity chambers have been introduced! Ideal for temperature cycle tests and temperature and humidity cycle tests for automotive components and more.

At AITES Co., Ltd., we offer "environmental testing in a high-power constant temperature and humidity chamber." It is capable of a constant temperature change of up to 15°C/min (-45 to ±155°C). Temperature cycle testing can be conducted by controlling the temperature gradient. Additionally, the temperature control range is wider than that of typical constant temperature and humidity chambers, with control possible at 95°C. 【Features】 ■ Two high-power constant temperature and humidity chambers introduced ■ Constant temperature change of up to 15°C/min (-45 to ±155°C) is possible ■ Temperature cycle testing can be conducted by controlling the temperature gradient ■ Temperature control range is wider than that of typical constant temperature and humidity chambers ■ Control possible at 95°C *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments
• Other analytical equipment
• others

Full and empty management refers to the real-time display of parking availability and the management of efficient use of parking spaces. By utilizing Hotron's sensors, drivers can quickly discover available parking spaces, achieving efficient parking lot operations. ■ For large parking lots, the "floor management method" and "block management method," which focus on cost reduction, are recommended. Sensors are installed at regular intervals to count the number of vehicles passing through. This method offers the advantage of easy installation and low costs. 【Target Products】 - Vehicle Count Sensor CCS2 - Ultrasonic Sensor HM-UX2/UW2 ■ For smaller scale operations, the "space management method," which installs sensors in each parking space to display availability with high accuracy, is recommended. By ensuring accurate full and empty displays, it helps prevent unnecessary entry of new vehicles and enables safe parking lot operations. 【Target Products】 - Occupancy Detection Sensor HM-UX2/UW2 - Occupancy/Pass Detection Sensor HM-LC6 - Occupancy Detection Sensor HM-LC7/LC7-FLS - Occupancy/Pass Detection Sensor HM-S6 - Occupancy Detection Sensor HM-S8

Kanto Tsushin Kogyo Co., Ltd. has implemented TwooCa to enhance employee wellbeing and work engagement. This initiative combines: • Digital employee ID • Incentive-based point programs • E-money utilization for daily use Employees earn points through actions such as engaging with health-related content, which can then be converted into digital money and used in everyday transactions. This approach represents a shift from traditional “benefits” to tangible, experience-based value—often referred to as a “third form of wage increase.” We are proud to support organizations that are redefining employee experience and workplace value. Read more: https://prtimes.jp/main/html/rd/p/000000087.000076589.html

[To the owners of parking lots and parking lot construction companies] "I am worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as pedestrian collisions and vehicle-to-vehicle accidents. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask that you arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

Due to the mandatory implementation of heatstroke prevention measures in the workplace, we have seen an increase in inquiries regarding heatstroke at our company. Among these, we have received many requests to "measure the heat index (WBGT) in accordance with JIS standards." To conclude, the observation of the heat index (WBGT) in accordance with the Japanese Industrial Standards JIS Z 8504 can be achieved by utilizing the black globe thermometer from the Natural Disaster Prevention System ZEROSAI. - Real-time heat index (WBGT) management in the cloud, combined with pinpoint weather forecasting - Notifications via electronic display boards and business chat (LINEWORKS, direct, Wowtalk, Microsoft Teams) when threshold values are exceeded - Centralized management of various observation equipment information such as wind speed, rainfall, water level, noise, and vibration - API integration available *For more details, please visit our website or feel free to contact us.

We would like to inform you that, in order to further strengthen and enhance our sales and service operations, there will be changes to our Nagoya Sales Office as of April 1st, as detailed below. ■ Relocation of Nagoya Sales Office 【New Address】 〒460-0003 6th Floor, Sando Building, 1-7-27 Nishiki, Naka Ward, Nagoya City, Aichi Prefecture TEL: 052-212-6520 / FAX: 052-212-6521 *Please note that the TEL and FAX numbers will also change. Taking this opportunity, all of our staff will continue to make even greater efforts. Please feel free to contact us.