Technology for Adding Megahertz Ultrasound to Ultrasonic Cleaners — Nonlinear Oscillation Control Technology Using Original Ultrasonic Probes —

Vibration measurement device using ultrasonic waves - Application of megahertz ultrasonic oscillation control technology -

The Ultrasonic System Research Institute has developed a completely new technology for controlling vibrations using original products (ultrasonic systems). Based on the analysis and evaluation of the nonlinear phenomena of ultrasound, we perform oscillation control of megahertz ultrasound, utilizing the sound pressure measurement analysis and oscillation control technology we have developed so far. From the accumulation of data measuring, analyzing, and evaluating the dynamic characteristics of ultrasound propagating on surfaces, we apply technology that can measure, analyze, and evaluate vibration states from low frequencies (0.1 Hz) to high frequencies (over 900 MHz). Measures based on new vibration measurement analysis have become possible regarding vibrations and noise from buildings and roads, equipment, devices, walls, piping, desks, handrails, the moment of vibration when metal melts during welding, instantaneous vibrations during machining, and the complex vibration states of entire manufacturing devices and systems. This is a new method and technology, and various application cases have developed from the results of previous implementations. In particular, it is possible to measure and respond to vibrations at very low frequencies and irregularly fluctuating vibrations.

• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software
• others

Application of technology to control the interaction between ultrasound and water tanks.

The Ultrasonic System Research Institute has developed a technology for controlling "nonlinear phenomena of ultrasound (acoustic flow)" by combining a portable ultrasonic cleaner with megahertz oscillation control using ultrasonic probes. This technology controls the dynamic characteristics of ultrasound (cavitation and acoustic flow) based on the analysis of changing ultrasonic sound pressure data (nonlinear). Tailored to the structure, material, and acoustic properties of specific target objects, it measures and confirms the interactions between ultrasound, the target object, the water tank, fixtures, and cleaning solutions to set optimal oscillation conditions for the ultrasonic probe according to the intended purpose. Note: Oscillation waveform, oscillation output, control conditions, etc. (e.g., square wave, duty 47%, 13V, sweep oscillation, 3-18 MHz, etc.) In particular, the dynamic characteristics of harmonics generated by acoustic flow control enable responses at the nano level (emulsification, dispersion, cleaning, processing, etc.). By applying and developing examples of dispersing metal powders to nanosize, it has been put into practical use in material development, chemical reaction control systems, and more.

• Non-destructive testing
• Scientific Calculation and Simulation Software
• others

We provide consulting services for the development methods of ultrasonic propagation tools tailored to various usage purposes. --Application of sound pressure measurement and analysis technology--

The Ultrasonic System Research Institute has developed manufacturing technology for ultrasonic probes that can control ultrasonic propagation states from 500 Hz to over 900 MHz, and has created new ultrasonic propagation tools. This technology is available for consulting. Ultrasonic Probe: Outline Specifications - Measurement Range: 0.01 Hz to 200 MHz - Oscillation Range: 0.5 kHz to 25 MHz - Propagation Range: 0.5 kHz to over 900 MHz (confirmed through analysis) - Materials: Stainless steel, LCP resin, silicone, Teflon, glass, etc. - Oscillation Equipment: Example - Function Generator By understanding the acoustic properties of metals, resins, glass, etc., we can achieve propagation states tailored to specific purposes regarding sound pressure level, frequency, and dynamic characteristics through oscillation control. This is a new foundational technology for precision cleaning, processing, stirring, and inspection based on measurement, analysis, and evaluation techniques for ultrasonic propagation states. By utilizing the acoustic properties (surface elastic waves) of various materials (such as glass containers), ultrasonic stimulation can be controlled for structures and machine tools weighing several tons, even in a 3000-liter water tank, with ultrasonic output below 20 W.

• Water Treatment
• Other measuring instruments
• others

Ultrasound is captured as a <ultrasound dynamic system>, and analysis and control are performed.

The Ultrasonic System Research Institute has applied and developed technology utilizing "ultrasonic transducers" of multiple different frequencies. The applied technology developed this time is a technique that changes the effects of cavitation and acceleration into a specific power spectrum of propagation frequency through the control of standing waves. With ultrasonic irradiation at frequencies of 28 + 72 kHz and an output of 200 W, it is possible to achieve a dispersion effect of 1 micron. Additionally, ultrasonic irradiation at frequencies of 28 + 40 kHz and an output of 280 W can clean without causing damage. Through original measurement and analysis technology of ultrasonic propagation states, we have confirmed that control states can be realized by the combination of transducers. This represents a new ultrasonic technology, which, including the general effects of ultrasonic dynamic characteristics, serves as a significant and distinctive operational technique for the development of new materials, stirring, dispersion, cleaning, chemical reaction experiments, etc., and is utilized and developed in consulting. We will provide consulting support regarding the logical explanation of the principles and specific methods (techniques).

• others

--- Ultrasonic Control System in Megahertz through Control of Nonlinear Phenomena in Ultrasound ---

The Ultrasonic System Research Institute has developed a technology that utilizes "the technology to control nonlinear phenomena of ultrasound" to "control ultrasonic stimulation according to its intended purpose." This technology controls ultrasound (cavitation and acoustic flow) tailored to specific objectives by measuring and confirming the interactions within containers, using ultrasonic control via a megahertz ultrasonic oscillation probe. Note: Ultrasonic Control By setting the oscillation conditions for sweep oscillation and pulse oscillation using two types of nonlinear resonant ultrasonic oscillation probes, it dynamically controls high-frequency propagation states above 30 MHz through high sound pressure resonance phenomena and harmonic generation phenomena (nonlinear phenomena). Note: Ultrasonic Control "Precision Cleaning Example" Sweep Oscillation: 70 kHz – 15 MHz, 15 W Pulse Oscillation: 13 MHz, 8 W Note: Ultrasonic Control "Nano-Level Stirring Example" Sweep Oscillation: 880 kHz – 22 MHz, 12 W Pulse Oscillation: 14 MHz, 10 W In particular, the dynamic characteristics of harmonics through acoustic flow control enable reactions and responses at the nano level. This has been applied and developed from examples of dispersing metal powder to nanosize.

• Non-destructive testing
• Vibration and Sound Level Meter
• Other Software

Control system using ultrasonic oscillation probe and receiving probe.

The Ultrasonic System Research Institute has developed a megahertz ultrasonic oscillation control system that applies acoustic characteristic analysis and evaluation technology related to the manufacturing of original products: ultrasonic oscillation probes. This is a new application system for cleaning, modification, inspection, and more, utilizing ultrasonic waves. It is also possible to apply control through the combination of low-frequency vibrations and sounds. Developed from an engineering (experimental and technical) perspective on elastic waves and an abstract algebraic ultrasonic model, it serves as an applied system technology. The key point is the utilization method of surface elastic waves. By confirming the propagation characteristics of ultrasonic waves depending on the conditions of the target object (Note 1), it is important to address this as an original nonlinear resonance phenomenon (Note 2). Note 1: Propagation characteristics of ultrasonic waves - Nonlinear characteristics - Response characteristics - Fluctuation characteristics - Effects due to interactions Note 2: Original nonlinear resonance phenomenon This occurs when the generation of harmonics caused by original oscillation control is realized at high amplitudes through resonance phenomena, resulting in ultrasonic vibration resonance phenomena.

• Other measuring instruments
• Scientific Calculation and Simulation Software
• others

Technology for controlling nonlinear phenomena of ultrasound (acoustic flow)

The Ultrasonic System Research Institute has developed ultrasonic cleaning technology that enables control of acoustic flow (ultrasonic propagation state) in the range of 1-100 MHz by utilizing a megahertz ultrasonic oscillation control probe for ultrasonic cleaners. This is a new application technology for precision cleaning, processing, and stirring based on the measurement, analysis, evaluation, and technology of ultrasonic propagation states. By utilizing the acoustic properties (surface elastic waves) of various materials, ultrasonic stimulation can be controlled even in a 1000-liter water tank with an ultrasonic output of less than 20W. It was developed as an application method for nonlinear phenomena through an engineering (experimental and technical) perspective on elastic waves and an abstract algebraic ultrasonic model. The key point is the use of tools (elastic bodies: metals, glass, plastics). By confirming the propagation characteristics of ultrasonic waves based on the conditions of the target object, it is important to address it as an original nonlinear resonance phenomenon. We believe that this technology can be applied in various fields and are implementing proposals in various consulting services.

• Non-destructive testing
• Scientific Calculation and Simulation Software
• others

We have developed a "basic experimental system" for ultrasonic cleaning.

The Ultrasonic System Research Institute has developed a "Fundamental Experimental System" related to ultrasonic cleaning that applies the "ultrasonic system using degassing and microbubble control." - Experimental examples of the developed system - Confirmation of the cleaning effect of cavitation Confirmation of the acceleration effect Confirmation of the cleaning effect by acoustic flow Confirmation of the cleaning effect by liquid circulation Confirmation of the interaction between cavitation and liquid circulation Confirmation of the interaction between the cleaning object and the cleaning tank ..... Ultrasonic propagation characteristics 1) Detection of vibration modes (changes in autocorrelation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates) Note: "R" is a free statistical processing language and environment autocor: autocorrelation analysis function bispec: bispectrum analysis function mulmar: impulse response analysis function mulnos: power contribution rate analysis function

• Water Treatment
• Other analytical equipment
• others

- Combination technology of pulse oscillation and sweep oscillation -

The Ultrasonic System Research Institute has developed ultrasonic oscillation control technology that enables the utilization of ultrasonic propagation states above 100 MHz by applying a function generator and ultrasonic probes to ultrasonic cleaners. This is a new application technology based on the measurement, analysis, evaluation, and techniques of ultrasonic propagation states for precision cleaning, processing, and stirring. By utilizing the acoustic properties (surface elastic waves) of various materials, it is possible to control ultrasonic stimulation above 100 MHz to the target object with an ultrasonic output of less than 20 W, even in a 1000-liter water tank. This was developed as an application method for nonlinear phenomena through an engineering (experimental and technical) perspective on elastic waves and an abstract algebraic ultrasonic model. The key point is to confirm the ultrasonic propagation characteristics of the target object, which is important for setting the oscillation conditions of the ultrasonic oscillation control probe as an optimization for the system's vibration modes related to sweep oscillation and pulse oscillation, serving as a control method for the original nonlinear resonance phenomenon. It is believed that this technology can be utilized in various fields, and proposals are being made in various consulting services.

• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software
• others

Control technology for nonlinear ultrasonic sweep oscillation based on the classification of ultrasonic propagation phenomena.

The Ultrasonic System Research Institute has developed a classification method for the phenomenon of ultrasonic vibrations propagation. Based on this classification, we have developed a nonlinear sweep oscillation control technology for ultrasound using a nonlinear resonant ultrasonic oscillation probe. This ultrasonic sweep oscillation control technology method controls the linear and nonlinear resonance effects according to the main frequency (power spectrum) of the dynamic characteristics (changes in nonlinear phenomena) related to the propagation state of the ultrasound. From previous experiments and data measurement analyses, we have been able to classify effective utilization methods into the following four recommended controls: 1: Two types of sweep oscillation control (linear type) 2: Three types of sweep oscillation control (nonlinear type) 3: Four types of sweep oscillation control (mixed type) 4: Dynamic control (variable type) based on the combinations above Furthermore, the variable type can be classified into the following three control types based on the sweep oscillation conditions: 1: Linear variable control type 2: Nonlinear variable control type 3: Mixed variable control type (dynamic variable type)

• pump
• Non-destructive testing
• Other measuring instruments

It is a technology that enables ultrasonic control tailored to specific purposes.

Ultrasonic System Technology 1: Development technology for dedicated water tanks 2: Improvement technology for ultrasonic transducers 3: Measurement technology for ultrasonic propagation conditions 4: Control technology for ultrasonic (acoustic flow) We provide system technology related to the above. This technology enables ultrasonic control tailored to specific purposes. * Know-how for improving ultrasonic transducers... * * Know-how for designing ultrasonic water tanks... * * Know-how for measuring ultrasonic propagation conditions... * * Know-how for controlling ultrasonic (acoustic flow)... * We offer the above. For more details, please contact the Ultrasonic System Research Institute via email.

• Non-destructive testing
• others

We will measure, analyze, and evaluate the propagation state of ultrasound using an ultrasonic tester.

Features (for standard specifications) * Measurement (analysis) frequency range Specification: 0.1 Hz to 10 MHz * Ultrasonic oscillation Specification: 1 Hz to 100 kHz * Capable of measuring surface vibrations * Continuous measurement for 24 hours * Simultaneous measurement of any two points * Display of measurement results in graph form * Attached software for time series data analysis This is a measurement system using an ultrasonic probe. The ultrasonic probe is attached to the target object for oscillation and measurement. The measured data is analyzed considering position, state, and elastic waves, detecting various acoustic performances. Ultrasonic Probe: Outline Specifications Measurement range: 0.01 Hz to 10 MHz Oscillation range: 1 kHz to 25 MHz Propagation range: 1 kHz to over 900 MHz Materials: Stainless steel, LCP resin, silicone, Teflon, glass... Ultrasonic Propagation Characteristics 1) Detection of vibration modes (changes in self-correlation) 2) Detection of nonlinear phenomena (changes in bispectrum) 3) Detection of response characteristics (analysis of impulse response) 4) Detection of interactions (analysis of power contribution rates)

• Non-destructive testing
• Other measuring instruments
• others

Feedback analysis using multivariate autoregressive models for time series data: autocorrelation, power spectrum, bispectrum...

The Ultrasonic System Research Institute has developed a completely new technology for controlling the propagation state of surface elastic waves using its original product (ultrasonic tester). The ultrasonic sound pressure measurement and analysis technology developed so far will apply measurement, analysis, and evaluation techniques related to nonlinear phenomena in ultrasonics. It has become possible to implement new countermeasures based on vibration phenomena concerning vibrations and noise from buildings and roads, equipment, devices, walls, pipes, desks, handrails... as well as the vibrations at the moment of metal melting during welding and instantaneous vibrations during machining. Consulting services are available for this technology. Note: The following tools will be used for analysis Note: OML (Open Market License) Note: TIMSAC (TIMe Series Analysis and Control program) Note: "R," a free statistical processing language and environment autcor: autocorrelation analysis function bispec: bispectrum analysis function mulmar: impulse response analysis function mulnos: power contribution rate analysis function

• Vibration and Sound Level Meter
• Scientific Calculation and Simulation Software
• others

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. This is recommended for making doors with touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Allows for face recognition along with mask detection and body temperature measurement simultaneously. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and notifies via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

[To the owners of parking lots and parking lot construction companies] "I'm worried about not colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, particularly at entrances facing sidewalks or roadways, there is a risk of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures using various sensors and alerts the surrounding area with LED lights and buzzers. The system consists of a simple configuration of "sensor" + "controller" + "switching power supply (24V)" + "LED rotating light." *Please note that a separate control panel is required to include the controller and switching power supply (24V) when using the exit warning system. *We kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

The comprehensive catalog "General Catalog J-02" for the 2023 fiscal year has been completed. This comprehensive catalog features many Joe Prince products primarily used in industrial equipment and facilities. Please make use of it.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling or tripping over wired cables × Cable disconnection or damage × Worrying about forgetting to turn the switch back on after temporarily stopping the sensor. × Wanting to be notified of bed exits even from a location far from the nurse call outlet. Such concerns can be resolved simply by connecting our wireless nurse call linked set to the sensor! Our wireless nurse call linked set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed area, alleviating concerns about tripping or falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations far from the nurse call outlet, allowing for more flexible equipment placement.

Japan is one of the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of major earthquakes occurring. Regarding the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake countermeasures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" For more details, please download the materials or contact us.